•  Complete Installation and Upgrade Information for Software AG Products
  •  About this Documentation
    • Document Conventions
    • Online Information and Support
    • Data Protection
  • Software AG Preparation and Planning Guide
  • Upgrade Testing Guidelines
  • webMethods Release Notes
  • Release Readmes
  • System Requirements for Software AG Products
  • Supported Upgrade Paths
  • Supported Version Interoperability for webMethods Products
  •  Installing Software AG Products On Premises
    • About this Guide
    •  Using Command Central or Software AG Installer to Install Products
      • Using Command Central to Install Products
      • Using Software AG Installer to Install Products
    •  Hardware Requirements and Operating System, Browser, and RDBMS Support
      •  Hardware Requirements
        • Minimum and Recommended Hardware Requirements
        • Additional Hardware Requirements
      • Operating System Support
      • Browser Support
      • RDBMS Support
    •  Preparing for Product Installation
      • Shut Down Products
      • Prepare for Installation For All Products (Windows System)
      • Prepare for Apama Installation (Linux System)
      • Prepare for API Gateway and Developer Portal (Linux System)
      • Prepare for API Portal Installation (UNIX System)
      • Prepare for ApplinX Installation
      • Prepare for CentraSite Installation (UNIX System)
      • Prepare for EntireX Installation
      • Prepare for MashZone NextGen Installation (Linux System)
      • Prepare for Mobile Designer Installation
      • Prepare for My webMethods Server Installation (UNIX System)
      • Prepare for webMethods OneData Installation (Windows System)
      • Prepare for Optimize Analytic Engine Installation (UNIX System)
      • Prepare for Tamino Installation (Linux or UNIX System)
      • Prepare for Zementis Predictive Analytics Installation
      • Prepare Database Connection Information
    •  Preparing for Database Component Creation
      •  Database Component Descriptions and Installation Requirements
        • ActiveTransfer Server Database Components
        • API Gateway Database Component
        • CloudStreams Database Component
        •  Integration Server or Microservices Runtime Database Components
          •  External RDBMS versus Embedded Database
            • Using the Embedded Database
            • Using the External RDBMS
          • Archiving the ISCoreAudit Database Component
        • Mobile Support Database Component
        • My webMethods Server Database Components
        • webMethods OneData Database Components
        • Optimize Database Components
        •  Process Engine Database Components
          • Archiving the ProcessAudit Database Component
        • Rules Engine Database Component
        • Trading Networks Server Database Components
      • Database Drivers for DB2, MySQL Enterprise Edition, Oracle, PostgreSQL, and SQL Server
      •  Prepare for Database Component Creation in MySQL
        • Install the MySQL Community Edition Database Driver for Integration Server, Microservices Runtime, and Hosted Products
        • Install the MySQL Community Edition Database Driver and Edit the MySQL Configuration File for All Other Products
      •  Prepare for Database Component Creation for All RDBMSs
        • Database Administrator Account
        •  Character Set and Sort Order
          • DB2
          • MySQL Community Edition and Enterprise Edition
          • Oracle
          • PostgreSQL
          • SQL Server
        • Page and Block Size
        •  Set Database Options
          • MySQL
          • Oracle
          • SQL Server
    •  Installing Products, Creating Database Components, and Connecting Products to Database Components
      • Installing Products and Creating Database Components Using Command Central
      •  Installing Products Using Software AG Installer and Creating Database Components Using Database Component Configurator
        •  Installing Products Using Software AG Installer
          • Recommendations
          •  Before Installing Using Software AG Installer
            • Gather Information
            • Save and Verify Product License Files
            • Read and Perform Required Actions in Using Software AG Installer
            • API Gateway and Developer Portal Requirements
            • CentraSite Requirements
            • Deployer and Asset Build Environment Requirements
          •  Install Products Using Software AG Installer
            • Start the Installer and Provide General Information
            • Choose Products to Install
            • Choose Default Password for Products
            • Choose Language Packs to Install
            • Install Latest Updates
            •  Supply Product Configuration Information
              • ActiveTransfer Gateway
              • ActiveTransfer Server
              • Apama
              • API Portal
              • EntireX
              • Integration Server or Microservices Runtime
              • webMethods OneData
              • Universal Messaging
          •  After Installing Using Software AG Installer
            • Manage Products Using Command Central
            • Install Latest Updates if Not Available During Installation
            • Start, Configure, and Customize Products
            • Register Daemons and Set File Permissions (UNIX System)
        •  Uninstall Products Using Software AG Installer
          • Uninstall EntireX
          • Uninstall All Other Products
        • Create Database Users and Storage for PostgreSQL
        • Create Database Users and Storage in Non-DBO Schemas for SQL Server
        •  Create Database Components Using Database Component Configurator
          • Install the Database Component Configurator and Database Scripts
          •  Database Component Configurator Graphical User Interface
            • Start the Database Component Configurator GUI
            •  Create Database Components, Database User, and Storage
              • Choose the Action to Perform
              • Create Database Components, Database User, and Storage
              • Specify the Connection to the RDBMS
            • Drop Database Components
            • Drop the Storage and Revoke Database User Permissions
          •  Database Component Configurator Command
            • Main Parameters
            • Additional Parameters
          •  Examples
            • Create the Database User and Storage
            • Drop the Storage and Revoke Database User Permissions
            • Create Database Components
            • Drop Database Components
            • Pass Parameters to Database Component Configurator Using a Shell Script or Bat File
      • Connecting Products to Database Components
    •  Registering Daemons to Automatically Start and Shut Down Products on UNIX Systems
      • Overview
      • Run the daemon.sh Command Line Tool
      • Configure Integration Server Shutdown Timeouts in systemd and Tanuki Service Wrapper (RHEL 7+, SLES12+, systemd)
      • Daemon Registration Examples for SLES 12+ and RHEL 7+ (systemd)
      • Product Daemons and rc-scripts
      • Troubleshooting
    •  Operating in International Operating Environments
      • Overview
      •  Language Packs
        • Language Packs for Software AG Designer
      • Extended Character Set
      • Configure Browsers and JRE Font
      • Configure the Proper Locale
  •  Using the Software AG Installer
    • About this Guide
    •  Concepts
      • Software AG Installer and Uninstaller
      •  Installation Methods
        • Install Products from Empower
        • Install Products Using an Installation Image
        • Install Products Using an Installation Script
      • Install Products or Create Images Faster
      • Generate Images for Multiple Operating Systems from an Image Generation Script
      • Uninstallation Methods
      • Installation and Uninstallation Modes
      • JDK Support
      • Ports
      • Logging
      • EU General Data Protection Regulation (GDPR)
    •  Critical Requirements and Recommendations for Successful Installation and Uninstallation
      • Machine Requirements
      • Access Requirements
      • Installer/Uninstaller and Installation/Uninstallation Requirements
      • Troubleshooting Downloads
    •  Using GUI Mode
      • Start the Installer on a Windows System
      • Start the Installer on a Mac OS X, UNIX, or Linux System
      • View the Welcome Panel
      • Use a Proxy Server
      • Provide Credentials
      • Read the License Agreement
      • Choose Release
      • Specify the Installation Directory
      • Select Products to Install
      • Select Language Packs to Install
      • Select Product Updates to Install
      • Configure Products
      • Review and Install
      •  Use Installation Images
        • Create an Image for One Operating System
        • Install from an Image
      • Use Existing Images to Install Products or Create Images Faster
      •  Use Installation Scripts
        • Create a Script
        • Edit an Existing Script
        • Install from a Script Using the GUI
        • Install from a Script Using the Command Line on Windows Systems
      •  Generate Images for Multiple Operating Systems from an Image Generation Script
        • Create the Image Generation Script
        • Generate Images
      • Change Logging Options
    •  Using Console Mode to Install
      • Start the Installer on a Mac OS X, UNIX, or Linux System
      • Use a Proxy Server
      • Provide Credentials
      • Choose Release
      • Specify the Installation Directory
      • Select Products to Install
      • Select Language Packs to Install
      • Select Product Updates to Install
      • Read the License Agreement
      • Configure Products
      •  Use Installation Images
        • Create an Image
        • Display the Contents of an Image
        • Validate the Contents of an Image
        • Install from an Image
      • Use Existing Images to Install Products or Create Images Faster
      •  Use Installation Scripts
        • Create a Script
        • Edit an Existing Script
        • Install from a Script on Mac OS X System, Other UNIX System, or Windows System
      •  Generate Images for Multiple Operating Systems from an Image Generation Script
        • Create an Image Generation Script
        • Generate Images
      • Change Logging Options
      • Listing the Available Artifacts
      •  Creating Container Images with Software AG Installer on Linux systems
        • Examples
    •  Uninstalling
      • Before You Begin
      • Start the Uninstaller
      • Uninstall Selected Products from Local or Remote Machine
      • Uninstall All Products from Local or Remote Machine with No User Input in GUI Mode
      • Uninstall All Products from Local or Remote Machine with No User Input (Silently) in Console Mode
      • Uninstall Using a Script in GUI Mode
      •  Uninstall Using a Script in Console Mode
        • Create a Script
        • Edit an Existing Script
        • Uninstall Using a Script
      • Windows Usage Notes
  •  Software AG Update Manager Help
    •  About Software AG Update Manager
      • Document Conventions
      • Online Information and Support
      • Data Protection
    •  Understanding Update Manager
      • What is Update Manager?
      • Logging
    •  Installing Update Manager
      • Requirements
      • Installing from Empower (Windows)
      • Installing from an Image (Windows)
      • Installing from Empower (*nix)
      • Installing from an Image (*nix)
      • Arguments for the Bootstrap Installer (*nix)
      • Creating an Installation Image for Update Manager
      • Creating an Installation Script for Update Manager
      • Installing Update Manager from a Script
      • Troubleshooting Installation Issues
      • Uninstalling Update Manager
    •  Using Update Manager
      • Best Practices for Using Update Manager
      • Configuring Update Manager
      • Starting Update Manager on Windows
      • Starting Update Manager on *nix
      • Supported Parameters for Starting Update Manager
      • Supported Arguments for the Start-up Scripts
      • Troubleshooting Start-up Operations
      • Troubleshooting Graphic User Interface Issues on *nix Systems
      •  Troubleshooting Connectivity Issues
        • Checking the Launcher Version
        • Using Software AG Command Central to Call Update Manager
        • Connection Issues when Using NTLM Proxy Server on a *nix Machine
        • Issues when Starting Update Manager on AIX Systems
    •  Managing Fix Updates
      • Before Installing Fixes
      • Installing Fixes from Empower
      • Connecting to Empower
      • Installing Fixes from an Image
      • Installing Fixes from a Script
      • Reverting the State of Product Fixes on an Installation
      • Deleting Fix Backups
      • Uninstalling Fixes
    •  Checking for Fix Updates for a Product Installation
      • About Fix Updates
      • Checking for Fixes Available on Empower
      • Checking for Installed Fixes
    •  Creating a Fix Image
      • About Fix Images
      • Creating a Fix Image
    •  Creating a Script
      • Creating a Script
    •  Creating an Inventory
      • Creating an Inventory
  •  Upgrading Software AG Products On Premises
    • About this Guide
    •  Prepare for Upgrade
      • Upgrades Covered in This Guide
      • Preparing, Planning, and Testing
      • Using Software AG Installer, Software AG Update Manager, Database Component Configurator, and Migration Utilities to Upgrade
      • Using Command Central to Upgrade
      • Documentation Needed to Perform the Upgrade
      • Troubleshooting
      • Support for Upgrade Across Operating Systems
      • General Upgrade Procedure Requirements
      • Upgrades and Migrations Covered in Other Guides
    •  Upgrade Software AG Infrastructure
      • Install the New Product
      • Prepare the Old Installation
      •  Migrate Software AG Infrastructure
        • Configurations, Data, and Assets that Will be Migrated
        • Run the Software AG Infrastructure Migration Utility
      • Complete the Upgrade
      • Configure Products, Update Host Names, Adjust Assets for Release Changes, Re-enable Auto-Startup
    •  Upgrade Metering
      • Install the New Products
      •  Upgrade Metering Agent
        • Prepare the Old Installation
        •  Migrate Metering Agent
          • Configurations that will be migrated
          • Cached measurements that will be migrated
          • Run the Metering Agent Migration Utility
      •  Upgrade Metering Server
        • Prepare the Old Installation
        •  Migrate the Metering Server
          • Folders and Locations that Will be Migrated
          • Run the Metering Server Migration Utility
      • Configure Products, Update Host Names, Adjust Assets for Release Changes, Re-enable Auto-Startup
    •  Upgrade BigMemory Max or Terracotta
      • Install the New Product
      • Prepare the Old Installation
      • Migrate BigMemory Max
      •  Migrate Terracotta
        • Migrate Terracotta Management Console Configuration and Data
        • Migrate Ehcache 3.x Data
      • Configure Products, Update Host Names, Adjust Assets for Release Changes, Re-enable Auto-Startup
    •  Upgrade Universal Messaging
      •  Universal Messaging Upgrade Guidelines
        • Universal Messaging Cluster Upgrade Guidelines
      • Install the New Product
      • Prepare the Old Installation
      •  Migrate Universal Messaging
        • Configurations, Data, and Assets that Will be Migrated
        •  Run the Migration Utility
          • Perform a Custom Migration
          •  Migrate Using Imported Settings
            • Migrate Using Custom Imported Settings with Prompting
            • Migrate Using Custom Imported Settings without Prompting (Silent)
            • Migrate Using Default Imported Settings without Prompting (Silent)
      • Complete the Upgrade
      • Configure Products, Update Host Names, Adjust Assets for Release Changes, Re-enable Auto-Startup
    •  Upgrade My webMethods Server
      • Cluster Upgrade Guidelines
      • Install the New Product
      • Prepare the Old Installation
      • Migrate Database Components
      •  Migrate My webMethods Server
        • Instances, Configurations, Data, and Assets that Can be Migrated
        •  Run the Migration Utility
          • Perform a Custom Migration
          •  Migrate Using Imported Settings
            • Migrate Using Custom Imported Settings with Prompting
            • Migrate Using Default Imported Settings without Prompting (Silent)
            • Migrate Using Custom Imported Settings without Prompting (Silent)
      •  Complete the My webMethods Server Upgrade
        • Check Java Service Wrapper #include Directives
        • Initialize a My webMethods Server Instance
        • Switch from Clone Migrated Database to Live Migrated Database
      • Complete the Business Rules Upgrade
      • Configure Products, Update Host Names, Adjust Assets for Release Changes, Re-enable Auto-Startup
    •  Upgrade Integration Server or Microservices Runtime and Hosted Wm Packages
      • Cluster Upgrade Guidelines
      • Install the New Products
      • Prepare the Old Installation
      • Migrate Database Components
      •  Migrate Integration Server or Microservices Runtime and Hosted Wm Packages
        • Configurations, Data, and Assets that Can or Will be Migrated
        •  Run the Migration Utility
          • Perform a Custom Migration
          •  Migrate Using Imported Settings
            • Migrate Using Custom or Default Imported Settings with Prompting
            • Migrate Using Custom or Default Imported Settings without Prompting (Silent)
      •  Complete the Integration Server Upgrade
        • Check Java Service Wrapper #include Directives
      •  Complete the Integration Server or Microservices Runtime Upgrade
        • Customize Startup Files
        • Update WSDLs
        • Upgrade from 10.1: Save and Synchronize an Updated Publishable Document Type
        • Connect Integration Server or Microservices Runtime and Hosted Products to Database Components
      • Complete the Adapters or eStandards Modules Upgrade
      • Complete the ActiveTransfer Upgrade
      •  Complete the CloudStreams Upgrade
        • Configure TLS 1.1 and 1.2 Trust Store
      • Configure Products, Update Host Names, Adjust Assets for Release Changes, Re-enable Auto-Startup
    •  Upgrade Software AG Designer and Business Process Data
      • Install the New Software AG Designer
      • Prepare the Old Software AG Designer
      • Migrate Database Components
      •  Migrate Software AG Designer
        • Before Migrating
        • Migrate Apama, Application Platform (Deprecated), Business Process, and Business Rule Projects
        • Migrate Task Application Projects
        • Redo Attachment List Control Customizations in CAF Applications
        • Migrate CloudStreams Server Definitions and Projects
        • Migrate Integration Server or Microservices Runtime Definitions
        • Migrate Mobile Projects
      • Complete the Business Process Upgrade
      • Configure Products, Update Host Names, Adjust Assets for Release Changes, Re-enable Auto-Startup
    •  Upgrade Infrastructure Data Collector
      • Install the New Product
      • Prepare the Old Installation
      •  Migrate Infrastructure Data Collector
        • Configurations, Data, and Assets that Can be Migrated
        •  Run the Migration Utility
          • Perform a Custom Migration
          •  Migrate Using Imported Settings
            • Migrate Using Custom or Default Imported Settings with Prompting
            • Migrate Using Custom or Default Imported Settings without Prompting
        • Complete the Upgrade
      • Configure Products, Update Host Names, Adjust Assets for Release Changes, Re-enable Auto-Startup
    •  Upgrade Optimize
      • Install the New Product
      • Ways to Migrate
      • Prepare the Old Installation
      • Migrate Database Components
      • Configure and Start the Terracotta Server Array
      • Update Connections to Other Products
      •  Migrate Optimize
        • Configurations, Data, and Assets that Can be Migrated
        • Upgrade from 9.12 or Later: Migrate Using the Migration Utility
        •  Upgrade from 9.9 or Later: Migrate Using the Define Environments Page in My webMethods Server
          • Not Reuse the Old Central Configurator System (CCS) Environment Definition
          • Reuse the Old CCS Environment Definition
          • Deploy the New Optimize Environment
        • Switch from webMethods Broker to Universal Messaging
      • Configure Products, Update Host Names, Adjust Assets for Release Changes, Re-enable Auto-Startup
    •  Upgrade the Asset Build Environment, Deployer, or Application Platform (Deprecated)
      • Install the New Product
      • Upgrade the Asset Build Environment
      •  Upgrade Deployer
        • Prepare the Old Installation
        •  Migrate Deployer
          • Configurations, Data, and Assets that Will be Migrated
          • Run the Migration Utility
      •  Upgrade Application Platform (Deprecated)
        • Prepare the Old Installation
        •  Migrate Application Platform
          • Configurations, Data, and Assets that Will be Migrated
          • Run the Migration Utility
        •  Complete the Upgrade
          • Verify and Correct Package Imports
          • Update the Tomcat Configuration
          • Upgrade from 9.9, 9.10, or 9.12: Complete the WmTomcat Web Applications Migration
      • Configure Products, Update Host Names, Adjust Assets for Release Changes, Re-enable Auto-Startup
    •  Upgrade Apama
      • Install the New Product
      • Prepare the Old Installation
      • Migrate Apama
      • Configure Products, Update Host Names, Adjust Assets for Release Changes, Re-enable Auto-Startup
    •  Upgrade Developer Portal, API Gateway, API Portal, or CentraSite
      • API Gateway Cluster Upgrade Guidelines
      • Install the New Products
      •  Upgrade API Gateway
        • Prepare the Old Installation
        • Migrate Database Components
        •  Migrate API Gateway
          • Configurations, Data, and Assets that Will be Migrated
          • Perform the Migration
      •  Upgrade Developer Portal
        • Prepare the Old Installation
        • Assets that are Migrated
        • Perform the Migration
      •  Upgrade API Portal
        • Upgrade from 9.9 through 10.5: Prepare the Old Installation
        •  Migrate API Portal
          • Assets that Can be Migrated
          • Perform the Migration
        • Complete the Upgrade
      •  Migrate API Portal 10.7 to Developer Portal 10.15
        • Prepare the Old Installation
        •  Migrate API Portal to Developer Portal
          • Assets that Can be Migrated
          • Limitations
          • Perform the Migration
          • Complete the Migration
      •  Upgrade CentraSite
        • Prepare the Old Installation
        •  Migrate CentraSite
          • Configurations that Will be Migrated
          • Run the Migration Command
        • Complete the Upgrade
      • Configure Products, Update Host Names, Adjust Assets for Release Changes, Re-enable Auto-Startup
    •  Upgrade MashZone NextGen
      • Install the New Product
      •  Upgrade from 10.1 or 10.3: Migrate MashZone NextGen
        • Prepare the Old Installation
        •  Migrate MashZone NextGen
          • Configurations, Data, and Assets that Will be Migrated
          • Run the Migration Utility
        • Complete the Upgrade
      •  Upgrade from 9.10 or 9.12: Migrate MashZone NextGen
        • Prepare the Old Installation
        •  Set Up the MashZone NextGen Repository
          • Set Up the Repository When Using the Embedded Derby Database
          • Set Up the Repository When Using Any Other Database
        • Upgrade from 9.10: Add Data from the Old Repository to the New Repository
        •  Update the MashZone NextGen Configuration and Copy Extensions
          • Update When an External Configuration Directory Was Used
          • Update When No External Configuration Directory Was Used
        • Upgrade from 9.10: Migrate Feeds and Run Upgrade Commands
      • Configure Products, Update Host Names, Adjust Assets for Release Changes, Re-enable Auto-Startup
    •  Upgrade from 9.9: Upgrade Mobile Designer
      • Install the New Product
      • Prepare the Old Installation
      • Migrate Mobile Designer
      • Configure Products, Update Host Names, Adjust Assets for Release Changes, Re-enable Auto-Startup
    •  Upgrade webMethods OneData
      • Gather Information for Installation
      • Install the New Product
      • Prepare the Old Installation
      • Migrate Database Components
      •  Migrate webMethods OneData
        • Configurations, Data, and Assets that Will be Migrated
        • Run the Migration Utility
      • Complete the Upgrade
      • Configure Products, Update Host Names, Adjust Assets for Release Changes, Re-enable Auto-Startup
    •  Upgrade Zementis Predictive Analytics
      • Install the New Product
      • Prepare the Old Installation
      •  Migrate Zementis Predictive Analytics
        • Assets that Will be Migrated
        • Run the Migration Command
      • Configure Products, Update Host Names, Adjust Assets for Release Changes, Re-enable Auto-Startup
    •  Upgrade Digital Event Services (Deprecated)
      • Digital Event Services Deprecation
      • Install the New Product
      • Prepare the Old Installation
      •  Migrate Digital Event Services (Deprecated)
        • Configurations, Data, and Assets that Will be Migrated
        • Run the Migration Utility
        • Complete the Upgrade
      • Configure Products, Update Host Names, Adjust Assets for Release Changes, Re-enable Auto-Startup
    •  Migrate Database Components
      • Requirements and Cautions
      • Prepare Database Components for Migration
      • Migrate Database Components Using Database Component Configurator
    •  Upgrade Using Command Central
      •  Supported Upgrade Scenarios
        • Same Installation Directory, Hosts, and Ports; Live Database
        • New Installation Directory, Same Hosts and Ports, Cloned Database
        • New Installation Directory and Ports, Same Hosts, Cloned Database
        • New Hosts, Live or Cloned Database
      • Upgrade Approaches
      • Upgrade Products in a Single Environment
      • Upgrade Products Using Software Stacks (10.1 and Later)
  •  Command Central
    • Software AG Command Central Supported Features Matrix
    •  Software AG Command Central Help
      • Document Conventions
      • Online Information and Support
      • Data Protection
    •  Getting Started with Command Central
      • What is Software AG Command Central?
      • Command Central Architecture
      •  Install Command Central
        • Override Bootstrapper Command Default Values
      • Start or Stop Command Central
      • Configure HTTP/S Proxy
      • Create Credentials Aliases
      • Connect to Software AG Repositories
      • Create, Refresh, or Change Sources for a Mirror Repository of Products or Fixes
      • Import Product License Keys for Instances or Components
      • Register Bootstrap Installers in Command Central
      •  Additional Configuration for Command Central in a Production Environment
        • Change or Reset the Command Central Administrator Password
        • Change or Reset the Platform Manager Administrator Password
        • Secure the Connection Between Command Central and Platform Managers
        • Control User Access to Command Central
        • Configure Command Central to Use JAAS for Advanced Authentication
        • Set Timeouts and Thread Pool Size for Command Central
        • Configure the Command Central and Platform Manager JVMs
      • Upgrade Command Central
    •  Creating, Managing, or Upgrading Standalone Product Installations
      • Understanding Standalone Product Installations
      • Understanding Product and Fix Repositories
      • Understanding Asset Repositories
      • Default and Custom Passwords for Product Administrator Users
      • Connect an Existing Product Installation to Command Central and Add It to Environments
      •  Create a New Standalone Installation
        • Create Asset Repositories
        • Before Installing Products
        • Before Installing Fixes and Support Patches
        • Before Creating Database Components
        •  Install and Configure Platform Manager for a New Standalone Installation
          • About Installing Platform Manager
          • Install Platform Manager Using the Command Central Bootstrapper
          • Install Platform Manager Using the Command Central Web User Interface
          • Supported Key Exchange Methods for SSH Connections
          • Configure Platform Manager
        • Create a New Standalone Product Installation and Add It to Environments
      • Create and Update Product Instances
      • Change the Status of an Instance or Component
      • Install Fixes
      • Install Support Patches
      • Compare Products, Fixes, and Instances
      • View KPIs and Alerts for an Instance or Component
      • Add an Environment to a Landscape
      • Configure Shared Secrets to Encrypt Instance and Component Passwords
      • Encrypt User Passwords for Product Configurations
      • Group Product Instances or Components
      • Monitor the Licensing State for a Landscape
      • Upgrade a Standalone Product Installation
    •  Creating or Upgrading Software Stacks
      • Understanding Software Stacks
      • Understanding Product and Fix Repositories
      •  Create a Software Stack
        • Before Installing Products
        • Before Installing Fixes and Support Patches
        • Before Creating Database Components
        • Create a Software Stack
      • Create Software Stacks from Existing Environments
      • Rename a Software Stack or Layer
      • Upgrade Software Stacks
    •  Common Use Cases with Command Central
      • How to Get Templates for Upgrade
      • Install or Upgrade Product Installations with Composite Templates
      • Install or Upgrade Product Installations with Stacks
      • Update Licenses on a Number of Nodes with Templates
    •  Command Central GitHub Projects
      • Automate Command Central Installation, Configuration, and Upgrade
      • Default Templates on GitHub
    •  Using Composite Templates
      • About Automated Provisioning of Environments
      • What is a Composite Template?
      •  Understanding the Composite Template Definition
        • Options
        • Environments
        • Layers
        • Templates
        • Migration
        • Provision
        • Maintenance
        • Nodes
        • Repositories
        • Actions
      • Creating a Custom Composite Template
      •  How Command Central Processes a Composite Template for Installations of Release 10.3 or Higher
        • environment.mode=provision|migration
        • environment.mode=maintenance
      • How Command Central Processes a Composite Template for Installations of Release 10.1 or Lower
      • Importing a Template into Command Central
      • Creating a New Environment Using a Composite Template
      • Updating Command Central to the Latest Fix
      • Updating a Provisioned Environment Using the Same Composite Template
      • Migrating to a Different Host with Cloned Database
      • Migrating Using Disconnected Migration
      •  Migrating a Product Instance
        • Changing an Instance Name During Migration
      • Migrating Platform Manager Using a Template
      • Monitoring the Status of a Composite Template
      • Validating a Composite Template
      • Correcting a Failed Composite Template Apply Operation
    •  Using Micro Templates
      • What is a Micro Template?
      • When to Use Micro Templates and When a Composite Template?
      • Connecting to the Default Templates Repository
      • Designing Micro Templates
      • Using the Sample Micro Templates
      • Creating a User-Defined Micro Template
      • Exporting the Platform Manager of an Installation to a Template
      • Exporting an Installed Product Instance to a Micro Template
      • Adding Configurations in an Exported Micro Template
      • Exporting the Database for Products in an Installation to a Template
      • Validating a Micro Template
    •  Bootstrapping Platform Manager on a Remote Machine Using a Template
      • Bootstrapping Platform Manager Using the Default SSH and WinRM Templates
      • Bootstrapping on a Remote Machine with a Substitute User
    •  Securing Passwords in Templates
      • Encrypting Passwords in Templates
    •  Managing Database Components Using a Template
      • Managing Database Components Using a Template
      • Supported Database Component Configurator Parameters
    •  Deploying Command Central Assets to Integration Cloud (Deprecated)
      • About Deploying Command Central Assets to webMethods Cloud Container (Deprecated)
      • Defining Environment Variables for Platform Manager Assets
      • How Platform Manager Deploys Assets with Dependencies
    •  Command Central Composite Assets
      • About Command Central Composite Assets
      • Adding Assets to the Build Source Directory
      • Setting Build Properties for Command Central Assets
      • Building Command Central Composite Assets
    •  Template Definition Reference
      • Tips for Writing in YAML
      • Reference Template DSL Definition
      • Infrastructure Micro Template Reference
      • Run-Time Micro Template Reference
      • Format of COMMON-* Configuration Types in the Template Definition
    •  Using the Command Line Interface
      • Installing CLI as a Remote Client
      • Displaying Help for the Command Line Interface
      • Displaying the Version of the Command Line Interface
      • Executing Command Central Commands
      • Executing Platform Manager Commands
      • Getting Familiar with Using Commands
      • Return Codes from Command Execution
      •  Invoking Commands from Scripts
        • Creating Shell Scripts that Execute Commands
        • Creating Ant Scripts that Execute Commands
        • Parameters to Use with the ccsetup Task
        • Parameters to Use with the cc Task
        • Using a Unix Shell Script to Change the Administrator Password for Command Central
      •  Managing Database Components Using CLI Commands
        • Installing Database Scripts for Software AG Products
        • Supported Database Component Configurator Actions
        • Create Database Components
        • Drop Database Components
        • Migrate Database Components
        • Recreate Database Components
        • Searching for Database Component Configurator Details
      •  Options for the Commands
        • Common Options
        • accept
        • check-every
        • configuration-file
        • debug
        • error
        • expected-values
        • force
        • format
        • input
        • input-format
        • log
        • media-type
        • output
        •  output-format
          • Recommendations When Selecting a Content Type
        • password
        • properties
        • quiet
        • retry
        • server
        • ssl-truststore-file
        • ssl-trust-all-hosts
        • ssl-truststore-password
        • sync-job
        • username
        • wait
        • wait-for-cc
      •  Administration Commands
        • About Administration Commands
        • sagcc exec administration
        • sagcc list administration
      •  Configuration Commands
        • Return Statuses from Executing Configuration Commands
        • Adding Configurations Exported from an Installed Product Instance to an Input File
        • sagcc get configuration common
        • sagcc get configuration compare
        • sagcc create configuration data
        • sagcc delete configuration data
        • sagcc get configuration data
        • sagcc update configuration data
        • sagcc get configuration instances
        • sagcc list configuration instances
        • sagcc get configuration types
        • sagcc list configuration types
        • sagcc exec configuration validation create
        • sagcc exec configuration validation delete
        • sagcc exec configuration validation update
      •  Diagnostics Logs Commands
        • sagcc get diagnostics logs
        • sagcc get diagnostic logs export file
        • sagcc list diagnostics logs
      •  Instance Management Commands
        • sagcc create instances
        • sagcc delete instances
        • sagcc get instances
        • sagcc list instances supported products
        • sagcc update instances
      •  Inventory Commands
        • sagcc list inventory assets
        • sagcc create inventory components attributes
        • sagcc get inventory components
        • sagcc get inventory components attributes
        • sagcc list inventory components
        • sagcc list inventory components attributes
        • sagcc update inventory components
        • sagcc update inventory components attributes
        • sagcc delete inventory components attributes
        • sagcc get inventory fixes
        • sagcc get inventory fixes compare
        • sagcc list inventory fixes
        • sagcc get inventory products
        • sagcc get inventory products compare
        • sagcc list inventory products
        • Specifying Search Criteria for Inventory Commands
      •  Jobmanager Jobs Commands
        • sagcc delete jobmanager jobs
        • sagcc delete jobmanager landscapejobs
        • sagcc list jobmanager jobs
        • sagcc list jobmanager landscapejobs
      •  Landscape Commands
        • sagcc add landscape environments nodes
        • sagcc create landscape environments
        • sagcc delete landscape environments
        • sagcc get landscape environments
        • sagcc list landscape environments
        • sagcc remove landscape environments nodes
        • sagcc update landscape environments
        • sagcc create landscape nodes
        • sagcc delete landscape nodes
        • sagcc exec landscape nodes generateNodeId
        • sagcc get landscape nodes
        • sagcc list landscape nodes
        • sagcc update landscape nodes
      •  License Key Commands
        • sagcc add license-tools keys
        • sagcc get license-tools keys
        • sagcc list license-tools keys
        • sagcc update license-tools keys
        • sagcc delete license-tools keys
        • sagcc update configuration license
      •  License Reports Commands
        • sagcc list license-tools reports installation-report
        • sagcc create license-tools reports installation-report
        • sagcc get license-tools reports installation-report reportid
        • sagcc delete license-tools reports installation-report
        • sagcc list license-tools reports
        • sagcc get license-tools reports installation-report output PDF
        • sagcc get license-tools reports installation-report output XML
      •  Lifecycle Commands
        • sagcc exec lifecycle
        • Specifying Search Criteria for Lifecycle Commands
      •  Monitoring Commands
        • sagcc get monitoring
        • sagcc get monitoring state
        • sagcc list monitoring alerts
      •  Provisioning Bootstrap Installers Commands
        • sagcc list provisioning bootstrap installers
        • sagcc exec provisioning bootstrap nodes
      •  Provisioning Fixes Commands
        • sagcc exec provisioning fixes install
        • sagcc exec provisioning fixes uninstall
        • sagcc list provisioning fixes uninstall dependencies
      •  Provisioning Products Commands
        • sagcc exec provisioning products install
        • sagcc exec provisioning products uninstall
        • sagcc list provisioning products uninstall dependencies
      •  Provisioning Assets Commands
        • sagcc exec provisioning assets install
        • sagcc exec provisioning assets uninstall
      •  Repository Commands
        • About Repository Commands
        • Using HTTPS to Connect to Repositories
        • sagcc add repository assets flatfile
        • sagcc add repository assets git
        • sagcc delete repository assets
        • sagcc list repository assets
        • sagcc list repository assets content
        • sagcc list repository assets dependencies
        • sagcc list repository assets namespaces
        • sagcc update repository assets flatfile
        • sagcc update repository assets git
        • sagcc add repository fixes
        • sagcc add repository products
        • sagcc delete repository
        • sagcc delete repositories
        • sagcc exec repository discover
        • sagcc exec repository fixes export
        • sagcc exec repository products export
        • sagcc exec repository mirror validateContent
        • sagcc exec repository refresh
        • sagcc list repository
        • sagcc list repository discover
        • sagcc list repository fixes content
        • sagcc list repository fixes dependencies
        • sagcc list repository fixes readme
        • sagcc list repository products content
        • sagcc list repository products dependencies
        • sagcc list repository products languages
        • sagcc update repository fixes
        • sagcc update repository products
      •  Resources Commands
        • sagcc list resources icons
      •  Security Credentials Commands
        • sagcc add security credentials
        • sagcc add security credentials sharedsecret
        • sagcc delete security credentials
        • sagcc exec security encrypt
        • sagcc exec security encrypt input
        • sagcc get security credentials
      •  Stacks and Layers Commands
        • sagcc create stacks
        • sagcc create stacks auto
        • sagcc create stacks layers
        • sagcc create stacks layers nodes master
        • sagcc delete stacks
        • sagcc delete stacks layers
        • sagcc exec stacks migrate
        • sagcc list stacks
        • sagcc list stacks layers
        • sagcc list stacks layers fixes
        • sagcc get stacks layers fixes compare
        • sagcc list stacks layers instances
        • sagcc list stacks layers instances compare
        • sagcc list stacks layers nodes
        • sagcc get stacks layers nodes master
        • sagcc list stacks layers products
        • sagcc list stacks migrate properties
        • sagcc list stacks migrate status
        • sagcc get stacks layers products compare
        • sagcc update stacks index
        • sagcc update stacks layers index
        • sagcc update stacks alias
        • sagcc update stacks layers alias
      •  Template Commands
        • sagcc delete templates composite
        • sagcc exec templates composite apply
        • sagcc exec templates composite import
        • sagcc exec templates composite import repository
        • sagcc exec templates composite generate
        • sagcc exec templates composite generate input
        • sagcc exec templates composite generate migration
        • sagcc exec templates composite validate
        • sagcc get templates composite export
        • sagcc list templates composite
        • sagcc list templates composite properties
    •  Configuring Command Central and Platform Manager
      • Configuration Types for Command Central and Platform Manager OSGI
      • Configuration Types for Command Central and Platform Manager OSGI ENGINE
      • Run-time Monitoring States for OSGI-CCE and OSGI-SPM
      • Run-time Monitoring States for OSGI-SPM-ENGINE
      •  Server System Properties
        • Authentication
        • Migration
        • Provisioning
        • Repositories
        • SSH Connections
        • Disk Compaction Strategy for the Command Central Cache
      •  Using the Secure Socket Layer (SSL) Protocol and Certificates in Command Central
        • Using the Secure Socket Layer (SSL) Protocol and Certificates in Command Central
        •  Preparing to Replace the Default Keystore and Truststore
          • Configuring the HTTPs Ports to Use the Custom Keystore
          • Update the HTTPs Port of the Command Central Server
          • Update the HTTPs Port of Platform Manager
        • Update the SSL Connection Settings for the CLI
        • Considerations When Using Configuration Properties
    •  Introduction to Command Central REST API
      • About Command Central REST API
      •  Securing Command Central REST API
        • Session Management
      • Command Central REST API Resources
      • Supported Media Types
      • HTTP Response Codes
      • Summary of REST Services
    •  Logging and Troubleshooting
      •  Using the Command Central and Platform Manager Logs
        • Viewing Logs in Command Central
        • Command Central Logs
        • Platform Manager Logs
        • Using the Correlation ID
        • Logging Levels
        •  Changing the Log Configuration Settings
          • Changing the Wrapper Logs Configuration
        •  Deleting Logs
          •  Size-based Log Rotation (Default)
            • Delete Command Central Logs
            • Delete Platform Manager Logs
          • Time-based Log Rotation
      • Activity Appears to Stop During File Download
      • Bootstrapper Fails with Package Error Such as "installer.jar not found"
      • Expected Product-specific Features are Not Available
      • Cannot Connect to Repositories Due to Invalid Credentials
      • Cannot Create Mirror Repository Because of Network Issues
      • Command Central Cannot Connect to Platform Managers
      • Values with Special Characters in a Template YAML File
      • Collecting Diagnostic Information with the Syscap UNIX Shell Script
      • Applying a Template Fails Because Product Configurations Fail to Apply
      • Setting the Values of Java System Properties in the Command Central Web User Interface and CLI
      • Remote Operations Run by Command Central over SSH get Terminated
      • Command Central Cache Takes too Much Disk Space
• Copyright

Complete Installation and Upgrade Information for Software AG Products

Copyright