• ACTIVITY

• ADD

• EDIT

• FIN

• HELP

• LIST

• LOG

• LOGOFF or LOGOUT

• LOGON or LOGIN

• MAIL

• MENU

• MODIFY

• QUIT

• REPORTS

• SET

• STATUS

• TECH

• XREF

---

ACTIVITY

ACTIVITY

The ACTIVITY direct command allows you to start the permanent activity display of Entire Operations directly.

For detailed information, see Monitoring Entire Operations Activities in the User's Guide.

ADD

ADD		USER
		NETWORK
		JOB	[network]
		INCONDITION	[job] [network]
		CALENDAR
		TABLE
		RESOURCE
		NODE	[network]
		CONDITION

The ADD direct command is used to define a new Entire Operations object.

Syntax Description

Syntax Element	Description
USER	Add a user.
NETWORK	Add a network.
JOB	Add a master job definition to a job network.
INCONDITION	Add a master input condition to a job.
CALENDAR	Define a new calendar.
TABLE	Define a new master symbol table.
RESOURCE	Define a new resource.
NODE	Define a new node.
CONDITION	Add an active condition. See Adding an Active Condition in the section Active Job Networks in the User's Guide.
job	Name of the job to which the object belongs. You can use an asterisk (*) or asterisk notation to open a selection window with a list of available names: see Valid Name Specifications.
network	Name of the network to which the object belongs. You can use an asterisk (*) or asterisk notation to open a selection window with a list of available names: see Valid Name Specifications.

If you issue the command from a system screen in the Network and Job Maintenance facility and omit the network or job name parameter, the currently specified network and/or job is selected.

For further information, see Defining and Managing Jobs in the section Job Maintenance in the User's Guide.

EDIT

EDIT

JCL NPROSE JPROSE

[name]

[network]

The EDIT direct command provides direct access to the Entire Operations Editor to edit JCL, Natural programs or text descriptions at the network and job level. After editing the specified object, you can press PF3 (End) to return to the screen from which you issued the EDIT command.

Syntax Description

Syntax Element	Description
JCL	Edit job JCL. If a job name is not specified, a window prompts you to select a job from a list of jobs available.
NPROSE	Edit the description of the currently selected network or the network specified with the command.
JPROSE	Edit the description of the currently selected job or the job specified with name.
name	Name of the object to be edited. (Not required if the object is NPROSE.) You can use an asterisk (*) or asterisk notation to open a selection window with a list of available names: see Valid Name Specifications.
network	Name of the network to which the object belongs. You can use an asterisk (*) or asterisk notation to open a selection window with a list of available names: see Valid Name Specifications.

If you issue the EDIT command from the Network and Job Maintenance facility and omit the network or name parameter, the editor opens for the currently selected network and/or job.

For further information, see Editing Master JCL and Natural Sources in the section Job Maintenance and Editor in the section System Overview in the User's Guide.

FIN

FIN

The FIN direct command terminates the Entire Operations session. It corresponds to the QUIT direct command.

HELP

HELP [MSG message-id]

The HELP direct command invokes the Entire Operations Help facility or displays the long message text of the message code specified with the command.

Syntax Description

Syntax Element	Description
message-id	The 7-character ID of a system message returned by Entire Operations, Natural or BS2000 (if installed). Entire Operations messages begin with EOR, followed by a four-digit number, for example, EOR0930. Natural messages begin with NAT, followed by a four-digit number, for example, NAT0954.

For further information, see the section Online Help Facility in the User's Guide.

LIST

LIST		USERS
		NETWORKS
		JOBS [network]
		INCONDITIONS [job] [network]
		EOJ [job] [network]
		CALENDARS
		TABLES
		RESOURCES
		NODES
		MAILBOX
		ACTIVE [network]
		CONDITIONS

The LIST direct command displays all objects that meet the selection criteria specified with the command. You can perform available functions on the object as normal and press PF3 (End) to return to the screen from which you issued the LIST command.

Syntax Description

Syntax Element	Description
USERS	List of users
NETWORKS	List of job networks
JOBS	List of jobs that belong to the specified job network
INCONDITIONS	List of input conditions
EOJ	List of events and actions for End-of-Job checking
CALENDARS	List of defined calendars assigned to the specified owner
TABLES	List of master symbol tables
NODES	List of defined nodes
MAILBOX	List of mailbox messages and requests Note: The use of the LIST MAILBOX direct command can be disallowed in the Entire Operations user profile: see the Show Mailbox Requests option described in the section Monitoring Functions in the Administration documentation.
ACTIVE	List of active jobs that belong to the specified job network
CONDITIONS	List of active conditions
job	Name of the job to which the object list belongs (input conditions, events in End-of-Job handling, dependencies) You can list a range of names by using an asterisk (*) or a greater than (>) or smaller than (<) sign: see Valid Name Specifications.
network	Name of the network to which the object belong (jobs, input conditions, End-of-Job handling, active jobs, dependencies) You can list a range of names by using an asterisk (*) or a greater than (>) or smaller than (<) sign: see Valid Name Specifications.

Examples of LIST

• LIST ACTIVE NETWORK1

  Displays the list of active jobs in the job network NETWORK1.

• LIST NETWORKS DEMO*

  Lists all networks with names starting with DEMO.

If you issue the LIST command from the Network and Job Maintenance facility and omit the job or network name parameter, the currently specified network and/or job is selected.

For further information, see Listing Active Jobs for a Network in the section Network Maintenance in the User's Guide.

LOG

LOG

The LOG direct command invokes the Log Selection Display screen where you can specify the required log. Press PF3 (End) to return to the screen from which you issued the LOG command.

For further information, see the section Log Information in the User's Guide.

LOGOFF or LOGOUT

LOGOFF LOGOUT

NODE SERVER MONITOR

node-number node-short-name

The LOGOFF (or LOGOUT) direct command logs off an Entire System Server node or prompts the Entire Operations Monitor to log off an Entire System Server node.

For z/OS: The security system access rights (RACF, for example) will be re-read by Entire System Server.

Syntax Description

Syntax Element	Description
LOGOFF or LOGOUT	LOGOUT and LOGOFF can be used synonymously. Logs off the specified Entire System Server node.
NODE or SERVER	Logs off the specified Entire System Server node. NODE and SERVER can be used synonymously.
MONITOR	Forces the Entire Operations Monitor to logoff a node and to perform a new logon on a node (when the node is used again). The logoff task is confirmed by an appropriate log message.
node-number	The node number, for example, 42.
node-short-name	The physical (short) node name, for example, N0042.

LOGON or LOGIN

LOGON LOGIN

NODE SERVER

node-number node-short-name

The LOGON (or LOGIN) direct command logs in an Entire System Server node.

Syntax Description

Syntax Element	Description
LOGON or LOGIN	LOGON and LOGIN can be used synonymously.
NODE or SERVER	Logs on the specified Entire System Server node. NODE and SERVER can be used synonymously.
node-number	The node number, for example, 42.
node-short-name	The physical (short) node name, for example, N0042.

After this command has been issued a logon window (see Logging on to an Operating System Server Node in the User's Guide) appears.

For z/OS: The security system access rights (RACF, for example) will be re-read by Entire System Server.

See also Displaying Job Dependencies and Connecting or Disconnecting Jobs in the section Job Maintenance in the User's Guide.

MAIL

MAIL

The MAIL direct command displays the contents of the user's mailbox.

For further information, see Viewing Mailbox Messages in the User's Guide.

MENU

MENU

The MENU direct command returns directly to the Main Menu from any screen in Entire Operations.

For further information, see Entire Operations Main Menu in the section Logging on to Entire Operations in the User's Guide.

MODIFY

MODIFY		USER	[userid]
		NETWORK	[network] [ version]
		JOB	[job] [network] [version]

The MODIFY direct command provides direct access to Entire Operations definition screens containing current values of the selected object. When you have modified the object, press PF3 (End) to return to the screen from which you issued the MODIFY command.

Syntax Description

Syntax Element	Description
job	Name of the job to be modified.	You can use an asterisk (*) or asterisk notation to open a selection window with a list of available names: see Valid Name Specifications.
network	Name of the network to be modified.
owner	Name of the network owner.
version	Network version.
userid	Entire Operations user ID.

If you issue the MODIFY command from the Network and Job Maintenance facility and omit the job or network name parameter, the currently specified network and/or job is selected.

For further information, see Defining and Managing Jobs in the section Job Maintenance in the User's Guide.

QUIT

QUIT

The QUIT direct command terminates the Entire Operations session. It corresponds to the FIN direct command.

REPORTS

REPORTS

The REPORTS direct command opens the Reports menu with a list of report types provided by the Entire Operations reporting facility.

For information on reporting, see the relevant section in the User's Guide.

SET

SET		LANGUAGE		1 2
		MAILBOX		ON OFF
		ACTIVE		A E I O N S T W
		OWNER		* owner

The SET direct command allows you to change Entire Operations system settings directly from any system screen that contains the direct command line.

Syntax Description

Syntax Element	Description
LANGUAGE	Sets the language of the Entire Operations screens and messages. Possible options:
	1	English
	2	German
MAILBOX	Specifies automatic notification of pending conditions via mailbox when you wish to display the Entire Operations Main Menu. Possible options:
	ON	Automatic notification.
	OFF	No notification.
ACTIVE	Sets the active database selection criteria. Possible options:
	A	Display all active jobs.
	E	Display all currently running jobs.
	I	Display all jobs in JES input queue.
	N	Display all jobs that terminated not OK.
	O	Display all jobs that terminated OK.
	S	Display all submitted jobs.
	T	Display all terminated jobs.
	W	Display all jobs with pending prerequisites.
OWNER	Changes the current owner name. By default, the name of the owner defined as Owner at Logon is used (see Viewing, Adding and Modifying a User in the Administration documentation). You can access all definitions belonging to the owner whose name you specify with the command, provided you are authorized to do so. See Granting Definition: Authorizing Other Users or Owners to Access a Network in the User's Guide. You can enter an asterisk (*) for a list of available owners.

Example of SET

SET MAILBOX OFF

Deactivates the automatic notification of pending conditions when you wish to display the Entire Operations Main Menu.

For further information, see the section Overview of Administration Functions and Options of the Administration documentation.

STATUS

STATUS

MONITOR NODES ACTIVE

The STATUS direct command allows you to perform certain system functions. When you have issued the command, the Entire Operations Monitor handling window opens. You can now enter the appropriate instruction.

Syntax Description

Syntax Element	Description
MONITOR	Displays the Entire Operations Monitor handling window. You can start and stop the Monitor from this window.
	Note: Even if under the user's profile settings for Administrator Functions, Monitor Start/Shutdown is set to N, this command allows a check of Monitor status.
NODES	Opens the Node Status screen and displays the status of all defined Entire System Server nodes. For more information, see the section Logging on to an Operating System Server Node in the User's Guide.
ACTIVE	Opens the window for handling Entire Operations activity monitoring (see the section Control of Activity Monitoring in the Administration documentation).

TECH

TECH

The TECH direct command displays technical information on your current Entire Operations session:

• Software AG products and components (for example, the Software AG Editor of Natural) and versions used and their installation dates

  Software AG product versions include service packs, cumulative fixes and hot fixes for Entire Operations (NOP) and System Automation Tools (SAT) if installed

• Node (Nd.) on which Entire System Server runs

• Natural program, map and library currently active

• code page used

• user ID/name

• current date and time

• operating system/version installed

• TP monitor and terminal ID/type installed on the server (mainframes only)

XREF

XREF

The XREF direct command displays cross-reference information on user exit routines, symbol tables, JCL, nodes, resources and undefined Entire Operations objects.

For further information, refer to Cross References in the User's Guide.