The Natural system files FNAT, FUSER, FDIC, FSEC and FSPOOL can also be located on VSAM files.
To support the locking of source objects a separate FLOCK file and related paths are necessary.
This section covers the following topics:
See the Prerequisites under Installing Natural for VSAM in the Installation section.
For the installation of Natural ISPF on VSAM system files, refer to the Natural ISPF Installation and Administration documentation. Be sure that you use the relevant modules (NVSISPV and NVSISPC) provided on the NVS installation tape.
This section describes step by step how to install Natural under the operating system z/OS using VSAM system files. The information given is basically a combination of the installation descriptions for both base Natural and Natural for VSAM (NVS), plus some points specific to VSAM system files.
To install Natural with VSAM system files, you need the datasets for both base Natural and NVS. The required datasets are listed in the table below:
| Dataset Name | Contents |
|---|---|
| NATnnn.ERRN | Natural error messages. |
| NATnnn.LOAD | Natural load modules. |
| NATnnn.SRCE | Natural source modules and macros. |
| NATnnn.JOBS | Example installation jobs. |
| NATnnn.INPL | Natural system programs. |
| NATnnn.EXPL | Natural example programs. |
| NVSnnn.LOAD | NVS load modules. |
| NVSnnn.SRCE | NVS source modules. |
| NVSnnn.EMPL | NVS example file. |
| NVSnnn.EXPL | NVS example programs. |
| NVSnnn.LINI | NVS Locking Source Objects. |
| NVSnnn.VINI | NVS FDIC initialization file. |
The notation nnn in dataset names represents the version number of the product. The sequence of the datasets is shown in the Report of Tape Creation which accompanies the installation tape.
SMA を使用する場合は、『System Maintenance Aid』ドキュメントを参照してください（Natural ドキュメント CD の最新版に含まれています）。
SMA を使用しない場合は、次の指示に従ってください。
このセクションでは、次の方法について説明します。
データセット COPY.JOB をテープからディスクにコピーします。
ローカルの命名規則に一致するように、このデータセットを変更します。
このデータセットの JCL を使用して、すべてのデータセットをテープからディスクにコピーします。
複数の製品のデータセットがテープで配布されている場合は、配布されたすべての製品のデータセットをテープからディスクにアンロードするための JCL がデータセット COPY.JOB に含まれています。
その後で、各コンポーネントに対して個別のインストール手順を実行する必要があります。
データセット COPY.JOB（ラベル 2）には、他のすべての既存のデータセットをテープからディスクにアンロードするための JCL が含まれています。 COPY.JOB をアンロードするには、次のサンプル JCL を使用します。
//SAGTAPE JOB SAG,CLASS=1,MSGCLASS=X //* --------------------------------- //COPY EXEC PGM=IEBGENER //SYSUT1 DD DSN=COPY.JOB, // DISP=(OLD,PASS), // UNIT=(CASS,,DEFER), // VOL=(,RETAIN,SER=tape-volume), // LABEL=(2,SL) //SYSUT2 DD DSN=hilev.COPY.JOB, // DISP=(NEW,CATLG,DELETE), // UNIT=3390,VOL=SER=volume, // SPACE=(TRK,(1,1),RLSE), // DCB=*.SYSUT1 //SYSPRINT DD SYSOUT=* //SYSIN DD DUMMY //
プレースホルダの意味は次のとおりです。
hilev は有効なハイレベル修飾子です。
tape-volume はテープボリューム名です（T12345 など）。
volume はディスクボリューム名です。
ローカルの命名規則に一致するようにディスクの COPY.JOB を変更し、ディスクのスペースパラメータを次のように設定してからこのジョブを送信します。
HILEV に有効なハイレベル修飾子を設定します。
LOCATION にストレージの場所を設定します。
EXPDT に有効な失効日を設定します。
COPY.JOB を送信して、その他すべてのデータセットをテープからディスクにアンロードします。
Under z/OS, the installation procedure for Natural with VSAM system files consists of the following steps:
Load the VSAM demo file EMPL and define the alternate index path EMPLX for the file EMPL.
Define three VSAM clusters to be used as system files for Natural (FNAT, FUSER and FDIC), an alternate index and a path for the alternate index for FDIC.
It is strongly recommended that you keep these three system files on separate VSAM clusters.
This step must only be performed if you have Natural Advanced Facilities installed and want your spool file to be a VSAM file, too.
Define an additional VSAM cluster to be used as spool file (FSPOOL) and five alternate indices.
Note:
Path processing is not supported
for FSPOOL.
This step must only be performed if you have Natural Security installed and want your security file to be a VSAM file, too.
Define an additional VSAM cluster to be used as security file (FSEC) and three alternate indices.
Note:
Path processing is not supported
for FSEC.
Allocate VSAM SCRATCH PAD File - Job VSAMI008, Step 1450
Initialization VSAM SCRATCH PAD File - Job VSAMI008, Step 1451
This step must only be performed if you want to use a scratch-pad file; that is, if you want to use read-only system files (ROSY=ON); see also the parameter ROSY and the macro NTLFILE (described in the Natural Parameter Reference documentation).
Define an additional VSAM cluster to be used as scratch-pad file.
For the optional scratch-pad file inclusion, the following NATPARM parameters must be added or, if already present, updated with:
NTLFILE 212,dbid,nt-file-number,dd-name-scratch-pad-file ROSY=ON
If you want your system file(s) to be opened for input, adapt your Natural parameter module as follows:
FNAT=(dbid,fnr,filename,,RO), FUSER=(dbid,fnr,filename,,RO), FSEC=(dbid,fnr,filename,,RO),
This step must only be performed if you want to use a locking of source objects on VSAM system file (SLOCK=PRE); see also the parameter SLOCK and the macro NTLFILE (described in the Natural Parameter Reference documentation).
Define an additional VSAM cluster to be used as source locking file.
For the optional source locking file inclusion, the following NATPARM parameters must be added or, if already present, updated with:
NTLFILE 002,dbid,nt-file-number,dd-name-source-locking-file,,PATH SLOCK=PRE
The default dd-name is FLOCK, the related default pathes are FLOCKA, FLOCKB and FLOCKC.
Allocate and Define VSAM Source Locking File - Job VSAMI008, Step 1460
Printing Data Records VSAM Source Locking File - Job VSAMI008, Step 1461
This step must only be performed if you want to use a VSAM Source Locking File; that is, if you want to use VSAM Source Locking parameter SLOCK - Source Locking (described in the Natural Parameter Reference documentation).
Assemble and link the Natural z/OS interface module NATOS contained in dataset NAT nnn.SRCE.
Edit, assemble and link the NVS parameter module NVSPARM. For a description of the parameters which can be specified, see Assembling the NVSPARM Parameter Module in the section Parameters.
Assemble and link the NVS I/O module NVSMISC with the LSR options:
DEFER=YES COMMIT=NO READINT=NO
See a description of the parameters which can be specified in NVSMISC (see the section Parameters).
Create the Natural batch parameter module.
To install Natural with VSAM system files, in addition to the VSIZE and NTDB specification, you must modify the parameters FNAT, FUSER and FDIC as follows:
VSIZE=126, FNAT=(vsam-dbid,fnr-fnat,dd-name-fnat), FUSER=(vsam-dbid,fnr-fuser,dd-name-fuser), FDIC=(vsam-dbid,fnr-fdic,dd-name-fdic), NTDB VSAM,vsam-dbid
vsam-dbid must have the same value in all four entries.
It is recommended to use different files and different file numbers for FNAT and FUSER. The FDIC file must be a file different from FNAT and FUSER. Therefore, the FDIC parameter must not be omitted.
The DD names are the logical names of the system files; each DD name can be up to seven characters long. The DD name for the FDIC path is created by appending an X to the DD name of the FDIC file.
If you have Natural Advanced Facilities installed and want your spool file to be a VSAM file, modify the FSPOOL parameter accordingly:
FSPOOL=(vsam-dbid,fnr-fspool,dd-name-fspool)
If you have Natural Security installed and want your security file to be a VSAM file, modify the FSEC parameter accordingly:
FSEC=(vsam-dbid,fnr-fsec,dd-name-fsec)
The FSEC file must be a file different from FNAT.
For information on the components and structure of the Natural interface to VSAM, see also Components of Natural for VSAM and Structure of the Natural Interface to VSAM in the section General Information.
With the INCLUDE instruction for the parameter module, specify the name of the Natural parameter module created in Step 8.
Add the following INCLUDE instructions to the link of the Natural batch nucleus:
INCLUDE NVSLIB(NVSNUC) INCLUDE NVSLIB(NVSFNAT) INCLUDE NVSLIB(NVSFSPO) INCLUDE NVSLIB(NVSFSEC) INCLUDE SMALIB(NVSFLOCK) INCLUDE SMALIB(NVSPARM) INCLUDE SMALIB(NVSMISC)
The module NVSFSPO is only required if you have Natural Advanced Facilities installed and want your spool file to be a VSAM file, too.
The module NVSFSEC is only required if you have Natural Security installed and want your security file to be a VSAM file, too.
The module NVSFLOCK is only required if you want locking for source objects on VSAM system files FUSER/FNAT.
If your front-end is not linked to your Natural nucleus, NVSPARM and NVSMISC must be linked to NATPARM instead.
Add the corresponding DD statements to the link step for Natural and link-edit the executable module.
Link the executable batch Natural nucleus.
Use the Natural system command INPL (see the Natural System Command Reference documentation) to load the Natural system programs (dataset NATnnn.INPL) into the Natural system files.
Ensure that the DD names specified in NATPARM are specified in the INPL job, too. In addition, an alternate index DD name (dd-name-fdicX) must be specified for FDIC.
Note:
If you want to install any other Software AG products that require
INPL steps, ensure that these INPL steps are adapted according to the VSAMI061
job.
Load the Natural error messages file (dataset NATnnn.ERRN) using the program ERRLODUS as described in the Natural SYSERR Utility documentation.
Ensure that the DD names specified in NATPARM are specified in the ERRLODUS job, too.
Use the system command INPL to load the Natural example programs (dataset NATnnn.EXPL) and the NVS example programs (dataset NVSnnn.EXPL) into the Natural system file.
Ensure that the DD names specified in NATPARM are specified in the INPL job, too. In addition, a path DD name (dd-name-fdicX) must be specified for FDIC.
Reorganize the FNAT system file using the VSAM facility AMS REPRO to unload and reload the file.
This step must only be performed if you wish to install NVS under CICS.
If NVS is to be installed under CICS, assemble and link the module NVSCICS.
Proceed with the specific installation steps for Natural required under your TP monitor (see the relevant sections in the Natural Installation), taking into account the following additions:
Modify your Natural online parameter modules according to Step 8.
Add the following INCLUDE instructions to all links of the online Natural nucleus:
INCLUDE NVSLIB(NVSNUC) INCLUDE NVSLIB(NVSFNAT) INCLUDE NVSLIB(NVSFSPO) INCLUDE NVSLIB(NVSFSEC) INCLUDE NVSLIB(NVSFLOCK)
The module NVSFSPO is only required if you have Natural Advanced Facilities installed and want your spool file to be a VSAM file, too. The online environment for Natural Advanced Facilities must be a CICS environment, and the VSAM spool files must be defined in the CICS FCT. The module NVSFSEC is only required if you have Natural Security installed and want your security file to be a VSAM file, too. The VSAM security files must be defined in the CICS FCT. The module NVSFLOCK is only required if you want locking for source objects on VSAM system files FUSER/FNAT. The VSAM locking files must be defined in the CICS FCT.
Add the following INCLUDE instructions to the link of the front-end in a CICS environment:
INCLUDE SMALIB(NVSPARM) INCLUDE SMALIB(NVSCICS)
Add the following INCLUDE instructions to the link of the front-end in any other supported environment:
INCLUDE SMALIB(NVSPARM) INCLUDE SMALIB(NVSMISC)
Before starting Natural, ensure that the DD and DSN names of the VSAM system files are known in your respective batch and online environments.
| TP Monitor | Instruction | ||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Com-plete | Catalog the VSAM system files FNAT, FUSER, FDIC and FDICX to
Com-plete using the CA function of the Com-plete utility UFILE.
If Natural Security is installed, catalog the VSAM security files FSEC, FSECA, FSECB and FSECC to Com-plete using the CA function of the Com-plete utility UFILE. If locking of source objects for VSAM system files FUSER/FNAT is desired, catalog the VSAM locking files FLOCK, FLOCKA, FLOCKB and FLOCKC to Com-plete using the CA function of the Com-plete utility UFILE. If you have specified PATH=CHECK in NVSPARM, catalog your front
program to Com-plete using
the CA function of the Com-plete utility ULIB with a region size of 36 KB, if
you have not changed the first default value for the
|
||||||||||||||||||||||||||||||||||||||||||
| CICS | Add the following entries to your FCT:
Refer to the job VSAMI005 for examples. You can add DD statements for these datasets to your CICS startup job, too. |
||||||||||||||||||||||||||||||||||||||||||
| TSO |
Add the following statements to your Natural CLIST:
|
This section describes step by step how to install Natural under the operating system z/VSE using VSAM system files. The information given is basically a combination of the installation descriptions for both base Natural and Natural for VSAM (NVS), plus some points specific to VSAM system files.
To install Natural with VSAM system files, you need the datasets for both base Natural and NVS. The required datasets are listed in the table below:
| Dataset Name | Contents |
|---|---|
| NATnnn.LIBR | Natural source modules, macros, relocatable modules and sample installation jobs. |
| NATnnn.INPL | Natural system programs. |
| NATnnn.EXPL | Natural example programs. |
| NATnnn.ERRN | Natural error messages. |
| NVSnnn.LIBR | NVS source modules, macros and relocatable modules. |
| NVSnnn.EMPL | NVS example file. |
| NVSnnn.EXPL | NVS example programs. |
| NVSnnn.LINI | NVS Locking Source Objects. |
| NVSnnn.VINI | NVS FDIC initialization file. |
The notation nnn in dataset names represents the version number of the product. The sequence of the datasets, their type and the space each dataset requires on disk are shown in the Report of Tape Creation which accompanies the installation tape.
The sample JCS supplied on tape for the installation of Natural assumes one library, which has installation sublibraries per Software AG product library. In addition to these sublibraries, you need a work sublibrary and a sublibrary for sample installation jobs for Natural. It is recommended that you create this library and the work sublibrary now.
Then copy the sublibrary containing the sample installation jobs from tape using the following JCS:
* $$ JOB JNM=NATJOBS,CLASS=0,DISP=D,LDEST=*,SYSID=1
* $$ LST CLASS=A,DISP=D
// JOB NATJOBS
// ASSGN SYS005,IGN
// ASSGN SYS006,cuu,VOL=NVSnnn
// MTC REW,SYS006
// MTC FSF,SYS006,nn
* Tape positioned at file ?, tape mark nn
* *** Now process NVSnnn.LIBR - JOBS ***
// EXEC LIBR,PARM='MSHP'
RESTORE SUBLIB=SAGLIB.NVSnnnJ:SAGLIB.NVSnnnJ -
TAPE=SYS006 -
LIST=YES -
REPLACE=NO
/*
// MTC REW,SYS006
/*
/&
* $$ EOJ
The notation cuu represents the physical unit address of the tape drive.
The notation nn represents the file sequence number given by "(3 * file-no) - 2", as shown on the Report of Tape Creation. Leave out the "// MTC FSF ..." instructions if your library is the first dataset on the tape.
The notation nnn represents the version number of the product.
Now use jobs NATTAPE and NVSTAPE from this job library to restore the Natural sublibrary from tape and make Natural known to MSHP.
All further datasets will be directly used from tape by the installation jobs.
Under z/VSE, the installation procedure for Natural with VSAM system files consists of the following steps:
Load the VSAM demo file EMPL and define the alternate index path EMPLX for the file EMPL.
Define three VSAM clusters to be used as system files for Natural (FNAT, FUSER and FDIC) and a path for FDIC.
It is strongly recommended that you keep these three system files on separate VSAM clusters.
This step must only be performed if you have Natural Advanced Facilities installed and want your spool file to be a VSAM file, too.
Define an additional VSAM cluster to be used as spool file (FSPOOL) and five alternate indices.
Note:
Path processing is not supported for FSPOOL.
This step must only be performed if you have Natural Security installed and want your security file to be a VSAM file, too.
Define an additional VSAM cluster to be used as security file (FSEC) and three alternate indices.
Note:
Path processing is not supported for FSEC.
Allocate VSAM SCRATCH PAD File - Job VSAMI008, Step 1450
Initialization VSAM SCRATCH PAD File - Job VSAMI008, Step 1451
This step must only be performed if you want to use a scratch-pad file; that is, if you want to use read-only system files (ROSY=ON); see also the parameter ROSY and the macro NTFILE in the section Profile Parameters in the Natural Parameters Reference documentation.
Define an additional VSAM cluster to be used as scratch-pad file.
For the optional scratch-pad file inclusion, the following NATPARM parameters must be added or, if already present, updated with:
NTFILE ID=212,DBID=dbid,FNR=nt-file-number,PASSWD=dd-name-scratch-pad-file ROSY=ON
If you want your system file(s) to be opened for input, adapt your Natural parameter module as follows:
FNAT=(dbid,fnr,filename,,RO), FUSER=(dbid,fnr, filename,,RO), FSEC=(dbid,fnr,filename,, RO),
This step must only be performed if you want to use a locking of source objects on VSAM system file (SLOCK=PRE); see also the parameter SLOCKand the macro NTFILE (described in the Natural Parameter Reference documentation).
Define an additional VSAM cluster to be used as source locking file.
Allocate and Define VSAM Source Locking File - Job VSAMI008, Step 1460
Printing Data Records VSAM Source Locking File - Job VSAMI008, Step 1461
For the optional source locking file inclusion, the following NATPARM parameters must be added or, if already present, updated with:
NTLFILE 002,dbid,nt-file-number,dd-name-source-locking-file,,PATH SLOCK=PRE
The default dd-name is FLOCK, the related default pathes are FLOCKA, FLOCKB and FLOCKC.
Set the parameters in the source of the module NATVSE to suit your requirements. The NATVSE generation parameters are described in the section Running Natural in Batch under z/VSE (Natural in Batch Mode) in the Natural Operations documentation.
Assemble and link the Natural z/VSE interface module NATVSE contained in dataset NATnnn.LIBR.
Edit, assemble and link the NVS parameter module NVSPARM. For a description of the parameters which can be specified, see the section Assembling the NVSPARM Parameter Module.
For a quick installation, use the Natural for VSAM LSR feature and specify the following NVMLSR definitions in NVSPARM (see also NVMLSR Macro in the section Parameters):
NVMLSR DDNAME=fnat-dd-name,SHRPOOL=1 NVMLSR DDNAME=fuser-dd-name,SHRPOOL=2 NVMLSR DDNAME=fdic-dd-name,SHRPOOL=3 NVMLSR DDNAME=fdicx-dd-name,SHRPOOL=3
If you want to use FSEC system files:
NVMLSR DDNAME=fsec-dd-name,SHRPOOL=4 NVMLSR DDNAME=fseca-dd-name,SHRPOOL=4 NVMLSR DDNAME=fsecb-dd-name,SHRPOOL=4 NVMLSR DDNAME=fsecc-dd-name,SHRPOOL=4
Assemble and link the NVS I/O module NVSMISC with the LSR options:
DEFER=YES COMMIT=NO READINT=NO
See the description of the parameters which can be specified in NVSMISC (see the section Parameters).
Create the Natural batch parameter module.
To be able to install Natural with VSAM system files, in addition to the VSIZE and NTDB specification, modify the parameters FNAT, FUSER and FDIC as follows:
VSIZE=126, FNAT=(vsam-dbid,fnr-fnat,dlbl-name-fnat), FUSER=(vsam-dbid,fnr-fuser,dlbl-name-fuser), FDIC=(vsam-dbid,fnr-fdic,dlbl-name-fdic), NTDB VSAM,vsam-dbid
vsam-dbid must have the same value in all four entries.
It is recommended to use different files and different file numbers for FNAT and FUSER. The FDIC file must be a file different from FNAT and FUSER. Therefore, the FDIC parameter must not be omitted.
The DD names are the logical names of the system files; each DD name can be up to seven characters long. The DLBL name for FDIC is created by appending an X to the DLBL name for the FDIC file.
If you have Natural Advanced Facilities installed and want your spool file to be a VSAM file, modify the FSPOOL parameter accordingly:
FSPOOL=(vsam-dbid,fnr-fspool,dd-name-fspool)
Assemble and link the parameter module.
If you have Natural Security installed and want your security file to be a VSAM file, modify the FSEC parameter accordingly:
FSEC=(vsam-dbid,fnr-fsec,dd-name-fsec)
The FSEC file must be a file different from FNAT.
For information on the components and structure of the Natural interface to VSAM, see also Components of Natural for VSAM and Structure of the Natural Interface to VSAM in the section General Information.
With the INCLUDE instruction for the parameter module, specify the name of the Natural parameter module created in Step 8.
Add the following INCLUDE instructions to the link of the Natural batch nucleus:
INCLUDE NVSNUC INCLUDE NVSFNAT INCLUDE NVSFSPO INCLUDE NVSFSEC INCLUDE NVSFLOCK INCLUDE NVSPARM INCLUDE NVSMISCD
The module NVSFSPO is only required if you have Natural Advanced Facilities installed and want your spool file to be a VSAM file, too.
The module NVSFSEC is only required if you have Natural Security installed and want your security file to be a VSAM file, too.
The module NVSFLOCK is only required if you want locking for source objects on VSAM system files FUSER/FNAT.
If your front-end is not linked to your Natural nucleus, NVSPARM and NVSMISCD must be linked to NATPARM instead.
Add the corresponding sublibrary for NVS to the search chain for the linkage editor and link-edit the executable module.
Link the executable batch Natural nucleus.
Use the Natural system command INPL (see the Natural System Command Reference documentation) to load the Natural system programs (dataset NATnnn.INPL) into the Natural system files.
Ensure that the DLBL names specified in NATPARM (Step 8) are specified in the INPL job, too. In addition, a path DLBL name (dlbl-name-fdicX) must be specified for FDIC.
Note:
If you want to install any other Software AG products that require
INPL steps, ensure that these INPL steps are adapted according to the VSAMI061
job.
Load the Natural error messages file (dataset NATnnn.ERRN) using the ERRLODUS utility (which is described in the Natural SYSERR Utility documentation).
Ensure that the DLBL names specified in NATPARM (Step 8) are specified in the ERRLODUS job, too.
Use the system command INPL to load the Natural example programs (dataset NATnnn.EXPL) and the NVS example programs (dataset NVSnnn.EXPL) into the Natural system file.
Ensure that the DLBL names specified in NATPARM (Step 8) are specified in the INPL job, too. In addition, a path DLBL name (dlbl-name-fdicX) must be specified for FDIC.
Reorganize the FNAT system file using the VSAM facility AMS REPRO to unload and reload the file.
This step must only be performed if you wish to install NVS under CICS.
If NVS is to be installed under CICS, assemble and link the module NVSCICS.
Proceed with the specific installation steps for Natural required under your TP monitor (see the relevant sections in the Natural Installation), taking into account the following additions:
Modify your Natural online parameter modules according to Step 8.
Add the following INCLUDE instructions to all links of the online Natural nucleus:
INCLUDE NVSNUC INCLUDE NVSFNAT INCLUDE NVSFSPO INCLUDE NVSFSEC INCLUDE NVSFLOCK
The module NVSFSPO is only required if you have Natural Advanced Facilities installed and want your spool file to be a VSAM file, too. The online environment for Natural Advanced Facilities must be a CICS environment, and the VSAM spool files must be defined in the CICS FCT. The module NVSFSEC is only required if you have Natural Security installed and want your security file to be a VSAM file, too. The VSAM security files must be defined in the CICS FCT. The module NVSFLOCK is only required if you want locking for source objects on VSAM system files FUSER/FNAT. The VSAM locking files must be defined in the CICS FCT.
Add the following INCLUDE instructions to the link of the front-end in a CICS environment:
INCLUDE NVSPARM INCLUDE NVSCICS
Add the following INCLUDE instructions to the link of the front-end in a Com-plete environment:
INCLUDE NVSPARM INCLUDE NVSMISCD
Add the corresponding sublibrary for NVS to the search chain for the linkage editor and link-edit the executable module. Before starting Natural, ensure that the DLBL names of the VSAM system files are known in your batch and online environments.
| TP Monitor | Instruction |
|---|---|
| Com-plete |
Add the following DLBL statements to your Com-plete startup job: // DLBL FNAT, 'DSN=SAGLIB.VSAM.FNAT',,VSAM,CAT=xxxx // DLBL FUSER, 'DSN=SAGLIB.VSAM.FUSER',,VSAM,CAT=xxxx // DLBL FDIC, 'DSN=SAGLIB.VSAM.FDIC',,VSAM,CAT=xxxx // DLBL FDICX, 'DSN=SAGLIB.VSAM.FDIC.PATH',,VSAM,CAT=xxxx // DLBL EMPLVS, 'DSN=SAGLIB.VSAM.EMPLVS',,VSAM,CAT=xxxx // DLBL EMPLVX, 'DSN=SAGLIB.VSAM.EMPLVX.PATH',,VSAM,CAT=xxxx If Natural Security is installed, add the following DLBL statements to your Com-plete startup job: // DLBL FSEC, 'DSN=SAGLIB.VSAM.FSEC',,VSAM,CAT=xxxx // DLBL FSECA, 'DSN=SAGLIB.VSAM.FSEC.AIXA',,VSAM,CAT=xxxx // DLBL FSECB, 'DSN=SAGLIB.VSAM.FSEC.AIXB',,VSAM,CAT=xxxx // DLBL FSECC, 'DSN=SAGLIB.VSAM.FSEC.AIXC',,VSAM,CAT=xxxx If you want locking of source objects for VSAM system files FUSER/FNAT, add the following DLBL statements to your Com-plete startup job: // DLBL FLOCK, 'DSN=SAGLIB.VSAM.FLOCK',,VSAM,CAT=xxxx // DLBL FLOCKA, 'DSN=SAGLIB.VSAM.FLOCK.PATHA',,VSAM,CAT=xxxx // DLBL FLOCKB, 'DSN=SAGLIB.VSAM.FLOCK.PATHB',,VSAM,CAT=xxxx // DLBL FLOCKC, 'DSN=SAGLIB.VSAM.FLOCK.PATHC',,VSAM,CAT=xxxx If you have specified PATH=CHECK in NVSPARM, catalog your front program to Com-plete using the CA function of the Com-plete utility ULIB with a region size of 36 KB, if you have not changed the first default value for the WPSIZE parameter in the Natural parameter module. |
| CICS | Add the following entries to your FCT:
Refer to the job VSAMI005 for examples. You can add DLBL statements for these datasets to your CICS startup job, too. |
To verify whether the installation has been successfully performed, log on to the library SYSEXNVS and run the following programs:
NVSINST1
NVSINST2
NVSINST3
NVSINST4
NVSINST5
NVSINST6
If all these programs can be executed successfully, the installation of Natural on VSAM system files is completed and verified.
Note for z/OS batch mode:
For verification in batch mode under z/OS, you can run the job
VSAMI200 which executes the above programs.
The Natural VSAM system files FSEC and FSPOOL cannot be used for record-level sharing (RLS), as the related AIX files cannot be accessed using a path definition. The reason is that null values are not suppressed during VSAM upgrade handling for AIX keys. The record length of AIX files related to FSEC and FSPOOL would be exceeded for AIX keys filled with blanks or binary zeros. This would cause problems under CICS, as the record length supported is limited to 32 K only. Natural for VSAM supports null-value suppression for AIX keys and the upgrade handling for AIX files.