This document lists, explains and provides examples of all Natural ISPF session, function and local commands.
Before consulting any command described here, you should read section Command Logic.
Note:
Bear in mind that you can issue session and function commands from any
system screen. You can issue local commands only from Editor screens (lists of
object names, objects in EDIT or
BROWSE mode).
Editor commands are described in section Editor.
This document covers the following topics:
The following symbols are used in the description of command syntax:
| Symbol | Name | Meaning |
|---|---|---|
| [ ] | Square brackets | Enclosed elements are optional. |
| { } | Braces | Only one of the enclosed elements can be specified. |
| [{ }] | Enclosed elements are optional, but if you do make a selection, only one element may be specified. | |
| ; | Semicolon | Assumed command delimiter when entering multiple commands (see your user profile). |
Note:
Do not type in brackets or braces as part of the command
input.
With Natural ISPF session commands, you can control your Natural ISPF session(s) and navigate within the system. Session commands can be issued from any system screen.
This subsection describes session commands in alphabetical order.
Opens a window with a list of all Natural ISPF sessions you have started. The current session appears highlighted.
The command format is:
ACTIVITY
You can issue any of the following line commands for any session in the list:
| Command | Function |
|---|---|
P |
Makes the selected session the current session
(see the POP session
command).
|
S |
Moves the selected session to the other half of the screen in split-screen mode. |
- |
Terminates the selected session(s); if the session is an edit session, it is ended without saving modifications. |
When you close the activity display with ENTER or
PF3, the session selected with the P line
command will be the current (active) session.
You can give a session a short name by typing the short name in the
appropriate field in the column headed Name in the activity
window. This serves for easy identification of the session in a subsequent
POP command. Alternatively, you can type a PF key
name in the Name field. Pressing this PF key calls the associated session to
display. This PF key is valid only until you change it or log off from Natural
ISPF, and overrides the PF definition in your user profile.
The following is an example of an ACTIVITY
window:
S*>>>EDIT-NAT:NSPFHELP(ALL)-Text->Report-Free-42K ------------- Columns 001 072
COMMAND===> activity SCROLL===> CSR
****** ****************************** top of data *****************************
+------------------------N-ISPF ACTIVITY TABLE-------------------------+
! !
! Cmd Name Session !
! --- ---- ---------------------------------------------------------- !
! PF6 WORKPOOL - ENTRY PANEL ! e to
! PF7 LIST-PDS:BRY.COMN.SOURCE(*) ! list.
! PF5 NATURAL VIEW - ENTRY PANEL ! uting
! F1 EDIT-NAT:NSPFHELP(ALL)-Text !
! !
! !
! !
+----------------------------------------------------------------------+
000130 &L
000140 ALL ED
000150 The command edit is executed for all members of the list. If an
000160 #end§command usually assigned to #PF3§ is entered, the current edit
000170 session is terminated and an edit session for the next§member from the
000180 list is opened.
000190 &L
Enter-PF1---PF2---PF3---PF4---PF5---PF6---PF7---PF8---PF9---PF10--PF11--PF12---
Help Split End Suspe Rfind Rchan Up Down Swap Left Right Curso
|
The window shows four Natural ISPF sessions, the Natural
EDIT session being the current session. You can call
this session to display from any screen using the command:
POP F1
If you press PF6 from any screen, the Workpool Entry Panel becomes the current session.
Activates the Natural application specified in the command parameters.
The command format is:
APPLICATION library[startup-program[parameters]]
where:
| Parameter | Meaning |
|---|---|
library |
The Natural library to be invoked. |
startup-program |
The program to be started. |
parameters |
First parameter(s) of the startup program |
| Command | Function |
|---|---|
APP SYSERR |
Displays the Natural SYSERR
Utility Menu.
|
APP SYSDDM
MENU |
Displays the Natural View Maintenance Menu. |
APP SYSMAIN MENU
C |
Selects the COPY
function on the SYSMAIN menu.
|
The APPLICATION command is especially
useful for the system administrator in menu definition, allowing applications
written in Natural to be integrated into the Natural ISPF menu structure (see
also the section Menu
Maintenance in the Natural ISPF Administration
Guide).
Invokes the Natural Edit Buffer Pool Utility (see the section Buffer Pool and Recovery Files in the Natural ISPF Administration Guide).
The command format is:
BPSTAT
Modifies the break interval defined in your user profile. The value
specified is the number of trace windows to be displayed before you are
prompted to interrupt processing: BREAK PROCESS (Y/N). For
example, after the command BREAK 3, you are given
the opportunity to interrupt processing every 3 trace windows.
The command format is:
BREAK {n }
{OFF}
where n stands for the number
of trace windows to be displayed before the break in processing is allowed, and
OFF disables the break feature.
For more information, see the subsection Break in Processing in the section Useful Features.
Invokes the calculator on your screen that allows you to perform computation in numeric or hexadecimal mode.
The command format is:
CALCULATOR
For more information, see the subsection Using the Calculator in the section Useful Features.
Invokes the Magic-Character definition screen in your user profile. You can define magic characters for any number of Natural ISPF commands (see the subsection Magic-Character Definition in the section Profile Maintenance).
The command format is:
CHARPROF
Defines the colors to be used by the Natural ISPF browser, which is
responsible for all LIST,
BROWSE and EDIT sessions.
The colors used in other screens cannot be modified with this profile option.
The command format is:
COLPROF
For more information, see the subsection Editor Color Definition in the section Profile Maintenance.
Specifies whether confirmation windows are used when performing
functions such as DELETE,
COMPRESS, CATALOG and
UNCATALOG. You can use this command to override the
setting in your user profile.
The command format is:
CONFIRM [ON]
[OFF]
[LONG]
[SHORT]
Meaning of the parameters:
| Parameter | Meaning |
|---|---|
ON (default)
|
Used after a CONFIRM OFF command
issued from the same system screen. Reactivates the confirmation feature
according to the setting in your user profile (LONG or
SHORT).
|
OFF |
Deactivates the confirmation feature for the current screen.
Useful when deleting multiple items from a list in a single input operation
with multiple D line commands. The message
CONFIRM OFF is displayed in the message line. As
soon as another system screen is invoked from the current one, an implicit
CONFIRM ON is performed.
|
LONG |
Confirmation windows are used. Confirm by entering the object name in the window. |
SHORT |
Confirmation windows are used. Confirm by entering
Y in the window.
|
If you issue the CONFIRM command without
parameters, the default is ON, taking LONG or
SHORT from your user profile.
The command format is:
CONTINUE
The CONTINUE command can be used in command
scripts to gain more flexible control in error situations. If no
CONTINUE statement is in the command script, the script is set to
PAUSE mode after an error.
If a CONTINUE statement (which can be compared to a
label) is in the script and an error occurs, the following actions are taken:
RECORD ON is set internally if not
activated by the user.
The command causing the error and the message is recorded.
All lines of the script until the next
CONTINUE command are deleted and execution of these
lines is skipped.
Processing continues with the next CONTINUE statement.
All following statements are executed.
Termination resets RECORD to its previous
value and informs the user if an error has occurred.
KEYS 3 PAUSE HELP VERIFY MESSAGE 7480 TECH ........ CONTINUE REMARK PROCESSING WILL CONTINUE HERE AFTER ERROR KEYS 3 INITIAL
The above script modifies the user profile, and by using the
CONTINUE command, it makes sure that PF3
is reset to the value from the user profile after execution of the script, even
if errors have occurred during execution of the script.
Applies to CA Panvalet and CA Librarian only. CONTROL
OFF suppresses the automatic control cards passed to CA Panvalet
or CA Librarian when a member is saved. Only the edited data (which may include
user-defined control cards) are sent to CA Panvalet or CA Librarian.
The command format is:
CONTROL [ON]
[OFF]
Meaning of the parameters:
| Parameter | Meaning |
|---|---|
ON (default)
|
Re-activates the automatic control cards |
OFF cards in the member
|
Suppresses the automatic control cards. You can define your own control |
You must issue the CONTROL command before
opening the new Editor session.
Displays your User Defaults definition screen in your user profile. You can modify any default (see the subsection User Defaults in the section Profile Maintenance).
The command format is:
DEFPROF
Displays the general defaults specific to BS2000 sites in your user profile. You can modify any default as required (see the subsection General Defaults in the section Profile Maintenance).
The command format is:
DEFBS2PROF
Note that this command is available only if the BS2000 subsystem is enabled at your site.
Displays the defaults specific to submitting BS2000 jobs in your user profile. You can modify any default as required (see the subsection Submit Defaults in the section Profile Maintenance).
The command format is:
DEFSUBPROF
Note that this command is available only if the BS2000 subsystem is enabled at your site.
Invokes the Editor Profile definition screen in your user profile. You can modify your Editor profile (see the subsection Editor Profile in the section Profile Maintenance).
The command format is:
EDITPROF
Note:
Any modifications made to your Editor profile using this command
only affect subsequently opened edit sessions, not already existing ones.
Returns you to the previous screen. Issued from the Main Menu,
END terminates the Natural ISPF session. Issued from
the last session, this command returns you to Natural.
This command is usually assigned to PF3.
The command format is:
END
Terminates all Natural ISPF sessions and Natural immediately. The
command corresponds to LOGOFF IMM;FIN.
The command format is:
FIN
Switches between PF key display (from PF1-PF12 to
PF13-PF24 or vice versa). See also the
KEYS
session command.
The command format is:
FLIP
Starts the generation of a command processor for Natural ISPF. For more information, see the subsection NCP Concept in the section System Configuration of the Natural ISPF Administration Guide.
The command format is:
GENNCP
Issued without parameter, displays a screen-related help text. The
HELP command is usually assigned to PF1.
The help text is displayed according to the following hierarchy:
Menu help text defined by your system administrator;
Help text from the online help facility.
You can also issue the HELP command with a
parameter indicating the topic on which help is required from any system screen
in the format
HELP [INDEX]
[object]
[:C]
where:
| Parameter | Meaning |
|---|---|
INDEX |
Lists all objects for which there is a help
text. You specify any object in a HELP command to
display the related help text.
|
object |
The object for which a help text is required.
This can be any object listed by the HELP INDEX
command. Enter the asterisk wildcard (*) and press ENTER to generate
selection lists of objects with the same prefix (see examples below)
|
:C |
Is substituted by the string marked by the
cursor (see the subsection Cursor-Sensitive String
Selection in the section Useful
Features). If you use the :C directive
from a help screen, you need not type in the HELP
command keyword.
|
Note:
In addition to the HELP command, most
menus offer the command NHLP which takes you to the
Natural help system directly.
Examples:
| Command | Function |
|---|---|
HELP LIST |
Displays the help text for the command
LIST.
|
HELP L* |
Displays a selection list of all items and commands starting
with L for which there is a help text. You can
select any item from the list to display the associated help text.
|
HELP FEATURES |
Displays help text for special Natural ISPF features. |
HELP
nnnn |
Displays a help text for error message number nnnn. |
HELP :C |
With cursor on string EDIT, executes the command
HELP EDIT.
|
Note:
Items in the body of a help text for which there is a separate help
appear in reverse video (on color terminals: yellow).
Used without parameter, displays current PF key assignments in your user profile. You can modify the assignments and specify whether and which PF keys are displayed on system screens (see the subsection PF-Key Definition in the section Profile Maintenance).
The command format is:
KEYS [ON]
[OFF] [string]
[FIRST] [INITIAL]
[LAST]
[n]
The string and INITIAL parameters are only
valid in conjunction with n (see
below).
The parameters have the following meaning:
| Parameter | Meaning |
|---|---|
OFF |
Eliminates the PF key line and associated command line from display. |
ON (default)
|
Displays the PF key line and associated command line. |
FIRST |
Displays PF1 - PF12. |
LAST |
Displays PF13 - PF24. |
n
string |
Assigns a command string to PF key n. If the string consists of more than one command, you must separate the commands with two command delimiters. If you use only one command delimiter here, Natural ISPF executes the KEYS command up to the first delimiter, and then executes each command in the string in turn (see also the subsection PF Key Assignments in the section Command Logic). |
n
INITIAL |
Resets PF key n to its initial value as defined in the user profile. This is especially useful for resetting a PF key in a command script to its original value after temporary modification. |
Examples:
| Command | Function |
|---|---|
KEYS 24
SEP;;SPLIT |
Assigns the command sequence
SEPARATE;SPLIT to PF24 (note the use of
the double command delimiter).
|
KEYS 3 PAUSE |
Assigns the command
PAUSE to PF3 |
... CONTINUE KEYS 3
INITIAL |
... and resets it later to its initial value. |
Redisplays the last ten (10) commands entered via the keyboard in this session (but see note below). You can select any command for reexecution, or modify any command by overtyping it before reexecution. Select the required command from the list by placing the cursor on it and pressing ENTER.
If a command is executed again, it is always put on top of the last command buffer. This keeps the commands used most in the buffer. Additionally, you can also delete commands from the last buffer. Commands not used again can be deleted; this avoids automatic deletion of commands likely to be reused.
The command format is:
LAST
Note:
To be stored for redisplay, the command must consist of at least
two words. Commands entered by PF key, magic character or selected from a
selection window are not stored. This also applies to commands entered using
menu options.
The LOGOFF session command allows you to
terminate Natural ISPF even if you are working with several sessions.
The command format is:
LOGOFF [IMM] [;Natural-command]
If your Editor profile has AUTOSAVE=OFF and you issue
the LOGOFF command without parameters, logoff
processing is interrupted if an Editor session with modified data is detected.
If your Editor profile has AUTOSAVE=ON and you issue
the LOGOFF command without parameters, all
modifications are saved during logoff processing.
If you wish to terminate Natural ISPF immediately, that is, regardless
of any modifications, you can use the IMM
(IMMEDIATE) parameter. All sessions will be closed
without saving and Natural ISPF will be terminated.
You can concatenate the LOGOFF command with
any valid Natural command.
If Natural ISPF is the only user interface installed, all sessions will be closed and you return to the Natural ISPF main menu.
Examples:
| Command | Function |
|---|---|
LOGOFF;FIN |
Terminates Natural ISPF as described above and terminates the Natural session. |
LOGOFF
IMM;FIN |
Terminates Natural ISPF immediately and terminates the Natural session. |
LOGOFF
IMM;SYSPROF |
Terminates Natural ISPF immediately and logs on
to library SYSPROF.
|
Logs on to the specified Natural library as a default library from any system screen.
The command format is:
LOGON library-name
The new library is addressed as the default library by function commands for Natural objects and as the library in the session command Natural.
Note:
Use this command especially if Natural ISPF is installed as the
only user interface, because in this case, the Natural
LOGON command (NAT LOGON)
does not apply.
The MACPARM command is used in command
scripts to stack data which is read by a macro using an input statement later
in the command script.
This avoids prompting by the macro for parameters, when using macros
in a command script. The MACPARM command must be the
only command in a source line.
The command format is:
MACPARM p1
where:
| Parameter | Meaning |
|---|---|
p1 |
Maximum length of this parameter is 50 bytes and it can contain blanks. |
Examples:
| Command | Function |
|---|---|
MACPARM LS PDS JW(A*) PLAY MAC
MAC1 |
Passes command LS PDS
JW(*) to macro MAC1.
|
Another useful example can be found in member VERIFY in
our example library.
Specifies whether macros are expanded in Natural programs and other
sources that include inline macros or the INCLUDE-MACRO statement.
For details, see the section Macro
Facility in the Natural ISPF Programmer's
Guide.
The command format is:
MACRO [ON]
[OFF]
where ON specifies macro expansion and OFF
specifies non-expansion. Default is ON.
Activates a defined menu. For example, the command MENU
MAIN displays the Natural ISPF Main Menu. The name of the menu
must be defined in the menu maintenance facility, see the section
Menu
Maintenance in the Natural ISPF Administration
Guide.
The command format is:
MENU name
where name specifies the menu name as defined in the menu maintenance facility.
The MESSAGE command can be used in command
scripts to display a text during execution of a script on the screen and to
interrupt the active command script. The MESSAGE
command must be the only command in a source line.
The command format is:
MESSAGE nnnn[p1,p2 ... pm]
where:
| Parameter | Meaning |
|---|---|
nnnn |
Must be a 4-digit error message number. First,
the user library SYSISPFU is searched for the message text. If it does not
exist, it is taken from the system library SYSISPS1.
|
p1, ...
pm |
Optional parameters which are used to replace
variable parameters (:1: . . . . . . :m:) in the
text. Parameters must be separated with your parameter delimiter, usually a
comma , and can contain blanks.
|
Examples:
| Command | Function |
|---|---|
MESSAGE
6812,MYPROG |
Results in the following message if no text for this number is available in the user library SYSISPFU: Member MYPROG not found. |
MESSAGE 6809,Please enter some
text |
Results in the following message if no text for this number is
available in the user library Please enter some text |
Another useful example can be found in member VERIFY in
our example library.
Invokes the Natural Defaults definition screen in your user profile which allows you to set several defaults that affect your working environment in Natural ISPF. For more information, see the subsection Natural Defaults in the section Profile Maintenance.
The command format is:
NATDEF
When you enter this command, a window prompts you for your user ID, password and Entire System Server node ID. Performs a logon to Entire System Server on the specified node.
The command format is:
NATP-LOG
Suspends your Natural ISPF session and invokes the Natural
environment. You can return to your Natural ISPF session at any time by issuing
the command SPF.
The command format is:
NATURAL [Natural-command and parameters]
If the Natural command is issued with parameters, the parameters are executed by Natural and you are automatically returned to Natural ISPF.
Displays a summary of changes in the current release of Natural ISPF
(new features, enhancements, etc.), selectable by topic after the
NEWS command has been issued.
The command format is:
NEWS
From Version 2.1.1 onward, this command is no longer needed and has no effect. However, it is still accepted for compatibility reasons.
The command format is:
NKEY [ON]
[OFF]
Selects the Entire System Server node ID specified with the command keyword. This command changes the default node and has no effect on existing sessions.
The command format is:
NODE id
Invokes the Entire System Server node table, which offers active help
for the NODE field in several Natural ISPF screens. For more
information, see the subsection
Entire System
Server Node Table in the section System
Configuration of the Natural ISPF Administration
Guide.
The command format is:
NODES
Displays the NSPF Parameters definition screen. You can modify any parameter (see the subsection Natural ISPF Parameters in the section System Configuration in the Natural ISPF Administration Guide).
The command format is:
NSPROF
Signals Natural ISPF that the command entered in the same input operation is an operator command. For easier operator command input, you are advised to assign this command to a magic character (see the subsection Magic-Character Definition in the section Profile Maintenance).
The command format is:
OPERATOR operator-command
Note:
If the command line is too short for an operator command, type a
plus sign + at the end of the command line. This invokes a prompt window in
which you can enter an operator command of up to 80 bytes long. Also, you are
advised to use the plus sign if the operator command string contains special
characters that have a special function in Natural ISPF (magic character,
delimiter), as the window does not interpret special characters.
The PAUSE session command can be written in
a command script that is executed with the PLAY
function command. It must be either the only or the last command in a source
line of the script. When the script is executed, it is interrupted at the place
of the PAUSE command.
To continue the script, you can issue the
PAUSE command from the Natural ISPF command line.
You can also use the PAUSE command if a command
script is interrupted due to an invalid command: the command appears in the
command line. You can correct the command, press ENTER to reexecute
it, and then issue the PAUSE command to continue the
script.
Note:
The PAUSE command must always be the
last command or the only command in a script line, otherwise it is
ignored.
The command format is:
PAUSE
See also the subsection Executing Command Scripts in the section Useful Features.
If the execution of a Natural ISPF command script is interrupted due
to the PAUSE command, you can cancel the script by
issuing the command PLAY OFF. The script entry is
also deleted from the workpool.
The command format is:
PLAY OFF
See also the subsection Executing Command Scripts in the section Useful Features.
Selects the specified Natural ISPF session for work.
The command format is:
POP [string]
where string identifies the required
session by the short name assigned in the ACTIVITY window or by
any string from the session's header line. For example, the command
POP PDS
selects the Natural ISPF session that might have
EDIT-PDS:NSP.V100.JCL(JOB1) as its header. If you use the
POP command without a parameter, you can select a
session by placing the cursor on it (usually on its header line). If the cursor
remains in the current session, a window with selectable sessions appears. The
current session is highlighted, the other sessions are numbered. Press
ENTER to select the current session, or select any other session by
entering its number in the input field.
Invokes the user Profile Menu. You can select any option (see the section Profile Maintenance).
The command format is:
PROFILES
Activates the recording of Natural ISPF commands issued and the
resulting error messages. The recorded messages are held in the User Workpool
in the member RECORD. This member can be played (the commands are
executed, see the PLAY function
command).
The command format is:
RECORD [ON]
[OFF]
RECORD or RECORD
ON activates recording of commands. RECORD
OFF ends recording. If a command causes an error, the error
message is also recorded, but prefixed by two asterisks (**). The
PLAY command ignores these lines.
If you lose files for any reason (for example, after an abnormal
termination), Natural ISPF notifies you with a message the next time you log
on. The RECOVER command displays a list of the lost
files which you can select with a line command for further editing and saving,
browsing or deleting.
The command format is:
RECOVER
See also the subsection Recovery in the section Useful Features.
Refreshes screen display.
The command format is:
REFRESH
The REMARK command is used in command
scripts for documentation purposes and must be the only command in a source
line.
The command format is:
REMARK text
Example:
REMARK The following command extracts all members REMARK including the string ADABASLIS
T PDS JW(*) SC=ADABAS
Returns directly to the Natural ISPF Main Menu of the current session.
If you issue this command from an edit session, Natural ISPF prompts you to
SAVE or CANCEL any
modifications.
The command format is:
RETURN
Allows you to send a message to up to five TSO, TIAM or Com-plete users anywhere within the network. A window opens prompting you for user ID(s), destination node number and message text. See also the subsection Message Switching in the section Useful Features.
The command format is:
SEND
Splits the current screen from its session to create two separate and
distinct sessions, for example, after selecting a member from a list for an
EDIT operation: the edit screen and the list become
two separate sessions.
The command format is:
SEPARATE
Useful in conjunction with the SPLIT
session command to display two screens from the same session, for example, an
edit session and the list of objects from which it was started. Use the command
sequence:
SEP;SPLIT
See the subsection Multi-Session Operations in the section Useful Features for a more detailed example.
Displays the Short Libraries definition screen for library names in your user profile. You can define a two-character alias for any library (see the subsection Library Definition in the section Profile Maintenance).
The command format is:
SHORTLIB
Switches your session to split-screen mode. Your screen is divided horizontally into two at the cursor position or at the line number specified as command parameter. An existing session is redisplayed in the lower part of your screen. If there are no other existing sessions, a new one is started.
The command format is:
SPLIT [n]
where n is the line number at which the
screen is to be split (n must be smaller than the available number of lines for
the screen). The SPLIT command is usually assigned
to PF2.
Suspends the current Natural ISPF session and starts a new one.
The command format is:
SUSPEND
The SUSPEND command is usually assigned to
PF4.
When in split-screen mode, makes the other session active. The cursor moves to the first input field of the activated session. When issued from a session in full-screen mode, recalls a suspended session in wrap-around fashion.
The command format is:
SWAP
The SWAP command is usually assigned to
PF9.
Displays technical information on Natural ISPF.
The command format is:
TECH
Modifies the trace interval in seconds defined in your user profile.
When you issue a command, a message appears in a window if the function is not
yet complete after the specified interval. The message informs you of Natural
ISPF activity, for example, PROCESSING 44 MEMBERS. The message is
updated at the specified interval.
The command format is:
TRACE [n]
[OFF]
where n stands for the interval in seconds,
and OFF disables the trace feature.
Note:
If you specify TRACE 0, the trace function is also
disabled.
Displays site-specific information maintained by your system administrator. For more details, see the subsection Online Technical and Site-Specific Information in the section Useful Features (see also the section Site-specific Online Information in the Natural ISPF Administration Guide).
The command format is:
UINFO
Reverses the effect of a previous ZOOM
command (see the ZOOM command below).
The command format is:
UNZOOM
Specifies versioning for PDS, z/VSE and Natural members. This command
overrides the setting of the VERSIONS parameter in your
user profile (see the subsection User Defaults in the
section Profile Maintenance).
The command format is:
VERSIONS [ON]
[OFF]
where OFF deactivates versioning and ON
(re-)activates versioning. ON is the default.
Eliminates the header lines of suspended sessions from your screen.
When in split-screen mode, a second ZOOM command
displays the current session in full-screen mode. You can return to
split-screen mode using the UNZOOM command.
The command format is:
ZOOM
Function commands perform functions on Natural ISPF objects. You can issue a function command in three different ways:
Enter a command in the command line and parameters in the parameter fields of the object Entry Panel as appropriate;
Use a line command to select an object from a list;
Enter command syntax in the command line of any screen in the format
COMMAND object-type object-parameters,function-parameters
A description of the command parameters follows.
Abbreviations of object types used in command syntax are:
| In all environments | Explanation |
|---|---|
BPF |
Buffer pool files |
BPR |
Recovery files |
CON |
Console |
CNF |
Configuration members |
CTN |
Incore database container |
DOC |
Con-nect documents |
ERR |
Natural error messages |
MAC |
Macro objects |
MNU |
Menus |
MV |
Previous versions of all types |
N |
Natural objects |
NLI |
Natural libraries |
NV |
Natural versions |
O |
Output in workpool |
PRD |
Predict descriptions |
R |
Recovery files |
SET |
Predict cross-reference set |
USR |
Users |
V |
Views |
| Additional objects under z/OS | Explanation |
|---|---|
A |
Active jobs |
D |
Datasets |
CST |
Module CSECTs |
ENQ |
System enqueues |
J |
Jobs |
LMO |
Loaded modules |
LIB |
CA Librarian members |
LV |
CA Librarian versions |
LOG |
System log |
P |
PDS members |
PV |
PDS versions |
SYS |
Job SYSOUT files |
VOL |
Volumes |
PAN |
CA Panvalet members |
UNI |
System units |
| Additional objects under z/VSE | Explanation |
|---|---|
DA |
Active jobs |
DJ |
Jobs |
DV |
Volumes |
FIL |
Files |
LIB |
CA Librarian members |
LV |
CA Librarian versions |
LOG |
System log |
MEM |
z/VSE members |
SUB |
Sublibraries |
PAN |
CA Panvalet members |
UNI |
System units |
VV |
Member versions |
| Additional objects under BS2000 | Explanation |
|---|---|
BF |
BS2000 files |
BJ |
BS2000 jobs |
BV |
BS2000 job variables |
LMS |
LMS elements |
LMV |
LMS element versions |
There are two types of object parameters.
Positional parameters:
These correspond to the name parameter fields on the object Entry
Panel and identify the required object, for example
library(member);
Keyword parameters:
Specify a further characteristic of the object that corresponds to a
parameter field on the object Entry Panel other than the name parameters.
Keyword parameters take the format
KEYWORD=value, for example
TYPE=t.
Keyword parameters can be abbreviated. The abbreviation must be long
enough to identify the keyword, for example, LIST DS *
V=MYDISK. In this case, V is a valid abbreviation
for the keyword VOLSER.
A list of possible keywords and their valid synonyms can be found in the section Keyword Parameters at the end of this documentation.
| Command | Function Parameters | Meaning (Member: KEY-FUNC)
|
|---|---|---|
CHANGE |
NEWCLASS
|
Changes class of job (valid in z/OS and z/VSE environments). |
DISP |
Changes disposition of job in R queue (z/VSE only). | |
PRIORITY |
Changes job priority (z/VSE only). | |
COPIES |
Changes the number of output copies (z/VSE only). | |
NEWDEST |
Changes output destination (valid in z/OS and z/VSE environments). | |
SHARE |
Makes file/job variable accessible to other users (for BS2000 files/job variables) | |
ACCESS |
Changes protection against modification (for BS2000 files and job variables). | |
RETPD |
Changes retention period (for BS2000 files and job variables). | |
READPSWD |
Changes read protection (for BS2000 files and job variables). | |
WRITEPSWD |
Changes write protection (for BS2000 files and job variables). | |
EXECPSWD |
Changes execution protection (for BS2000 files only). | |
BACKUP-TYPE |
Changes backup class (for BS2000 files only). | |
COPY |
target-parms
|
Object parameters of the source to which the object is to be copied. Replaces the target object with the same name. If this parameter is omitted, no replacement occurs. |
REPLACE
|
||
DOWNLOAD |
SOURCE
|
Downloads program source (Natural views and members only). |
BINARY |
Downloads a Natural view or member in binary format. | |
OBJECT |
Downloads a cataloged Natural object. | |
DESTINATION |
Destination of downloaded Natural object (for example, PC file name). | |
EXPORT |
PC
|
Target environment is a PC. |
CNT |
Target environment is Con-nect. | |
CABINET |
Name of Con-nect cabinet, where object is to be stored as a document. | |
PASSWORD |
If required, Con-nect password to access the cabinet. | |
DESTINATION |
Document name under which the object is to be stored. Not
required when using the SEND function.
|
|
SEND
|
Name of recipient. | |
TARGET |
PC or Con-nect. | |
HOLD |
LEVEL |
Holds a version and sets the version number to
n.
|
PRINT |
name |
Name of the printer. This printer overrides the printer specified in your user profile. |
ASIS |
Valid from an Editor session only: prints the whole Editor session, including header, PF key line, etc. | |
CONTROL |
Honors any ASA or machine code control characters. No additional headers will be printed. | |
NOCONTROL |
Deactivates automatic carriage control when printing Natural objects or job SYSOUT files. | |
DRIVER |
Specifies the name of a printer control
characters table as defined in the Natural NTCC macro,
or under Com-plete the name of a logical output driver routine, which can
perform additional output formatting during printing.
|
|
FORM |
Specifies a printout form. | |
NAME |
Specifies a list name for the printout. | |
DISP |
Disposition of the printout. | |
COPIES |
Specifies the number of additional printouts. | |
WORKPOOL |
Writes the output to the user workpool. | |
PS |
Specifies the number of lines per page for the printout. | |
SUPPRESS |
Suppresses header information and generation of form feeds. | |
PRINTER |
Name of the printer. This printer overrides the printer specified in your user profile. | |
NOM |
Uses the extended interface between Natural ISPF and Entire Output Management (NOM). | |
RELEASE |
NEWCLASS |
Releases held output of a job and assigns new class (z/OS only). |
RENAME |
NEWNAME |
New name of the object to be renamed. |
VERSION |
New version name to be assigned. This keyword is accepted only when renaming an LMS element version. | |
SUBMIT |
TARGET=id |
Where id is the target
node on which the job is to be submitted, if different from the current node.
|
TYPE=IDCAMS |
The object is not treated as a job, but the command sequence is passed to the IDCAMS utility. | |
TYPE=TSO |
The object is passed to the TSO Batch interface and should contain valid TSO commands. | |
UPLOAD |
SOURCE
|
Uploads program source (Natural views and members only). |
BINARY |
Uploads a Natural view or member in binary format. | |
OBJECT |
Uploads a catalogued Natural. | |
REPLACE |
Overwrites an existing object. | |
FROM |
Location of Natural object to be uploaded (for example, PC file name). |
Full parameter syntax is described for each object type in the relevant section of this documentation. No special distinction of required and optional parameters is made here, as Natural ISPF supports function command input with windows that prompt you for any required parameter you omit.
This subsection describes all function commands in alphabetical order and gives some examples. Each function command appears together with its valid abbreviation, which can be used as a line command from a list of object names.
Not all function commands apply to each object type. To find out which commands are available for a specific object type, simply type the object type code in the Natural ISPF command line and press ENTER. A window opens with a list of the valid functions.
To list available functions for Natural objects, type the object code
N in the command line and press ENTER. The list of
valid functions is displayed:
-------------------------- NATURAL ISPF MAIN MENU -----------------------------
OPTION === +---------------------------------------------------+
! ENTER FUNCTION: ! id BRY
! 1 L LIST 17 DS DESCRIPTION ! 11:04:01
0 PRO ! 2 B BROWSE 18 FR FORMAT ! inal DAEFTC55
1 NAT ! 3 E EDIT 19 DW DOWNLOAD ! ary BRY
2 VIE ! 4 D DELETE 20 UP UPLOAD ! 148
3 ERR ! 5 R RENAME 21 CR COMPARE !
4 PRE ! 6 SB SUBMIT Select ==> __ !
5 WOR ! 7 PL PLAY !
! 8 PR PRINT !
6 JOB ! 9 CP COPY !
7 PDS ! 10 CT CATALOG !
8 DAT ! 11 U UNCATALOG !
9 JOB ! 12 I INFORMATION !
10 MEM ! 13 HL HOLD !
11 VSE ! 14 RU RUN !
12 BS2 ! 15 XE EXECUTE !
13 LMS ! 16 EX EXPORT !
14 BS2 +---------------------------------------------------+
15 JOB-VAR'S - Maintain job variables (BS2000)
Enter-PF1---PF2---PF3---PF4---PF5---PF6---PF7---PF8---PF9---PF10--PF11--PF12---
Help Split End Suspe Rfind Rchan Up Down Swap Left Right Curso
|
Allocates a z/OS dataset, a z/VSE file or a BS2000 file. The
ALLOCATE command is usually issued for an existing
dataset or file. The allocation information for the existing item is displayed,
and you can overtype the name and modify the specifications for the new item.
| Command | Function |
|---|---|
AL D MYFILE |
Assuming you have a cataloged dataset named
MYFILE, this command displays the Allocate Dataset screen with
information for the MYFILE. Modify the display for the dataset to
be allocated.
|
AL D NEWFILE
VOL=COM811 |
If you wish to allocate a new, uncataloged
dataset without a model, this command displays the blank Allocate Dataset
screen for file NEWFILE on Volume COM811.
|
Under z/OS, this command is invoked implicitly if the target dataset of a copy operation does not exist.
Displays the specified object in Editor format. This means you can use
all Editor scrolling commands, including FIND and
LOCATE, as well as appropriate local commands
described in the subsection Local Commands -
Description.
| Command | Function |
|---|---|
BR N NATLIB |
Browses the Natural object MYPROG
in the (MYPROG) library NATLIB.
|
BR P
MYLIB(EX*) |
Displays a list with members starting with
EX in PDS library MYLIB. You can enter another prefix
in the window to modify the list, or mark a member with any character to browse
it.
|
BR CON |
Displays the console; you can issue any
operator command if you precede it with the Natural ISPF command
OPERATOR.
|
BR LOG |
Displays the system log. |
Catalogs the specified Natural program or dataset.
The command:
CAT N NATLIB(MYPROG)
catalogs the Natural program MYPROG in the library
NATLIB.
Displays the condition codes of the job specified in the command parameters. Condition codes appear in Editor format in browse mode.
The command:
CC COM444
displays the condition codes for job COM444. If there are
several copies of the same job, use the job number parameter, otherwise you are
notified with a message and the code for the copy last submitted is selected.
If you issue the CC command without
parameters, the job last submitted from Natural ISPF is selected.
Changes one or more attributes of the specified object; valid for z/OS jobs and SYSOUT file(s), z/VSE jobs, BS2000 files and job variables. The new attribute values can be specified by means of function parameters (see below). If none of the available function parameters are present, the new attribute values are prompted.
Available function parameters and restrictions:
| Parameter | Restriction |
|---|---|
NEWCLASS=c |
(valid in z/OS and z/VSE environments) |
DEST=destin or
NEWDEST=destin |
(valid in z/OS and z/VSE environments). |
DISP=disp |
(z/VSE only) |
PRIORITY=p |
(z/VSE only) |
COPIES=nnn |
(z/VSE only) |
USER=user |
(z/VSE only, synonym for DEST)
|
SHARE=YES/NO |
(for BS2000 files and job variables) |
ACCESS=READ/WRITE |
(for BS2000 files and job variables) |
RETPD=nnnn |
(for BS2000 files and job variables) |
READPSWD=password |
(for BS2000 files and job variables) |
WRITEPSWD=password |
(for BS2000 files and job variables) |
EXECPSWD=password |
(for BS2000 files only) |
BACKUP=t |
(for BS2000 files only) |
Combinations of the above parameters can be specified in one command.
Note:
Job classes, output classes and output destinations are
installation-dependent.
The command:
CH J MYJOB CLASS=C
changes the class of job MYJOB in an z/OS environment
from C to a new class which is prompted. Additionally a new output
destination can also be specified in the prompt window. If there is more than
one copy of the job, use the job number parameter. If JES2.4.1 or a lower
version of JES2 is installed at your site, the specified job queue entry must
not be in the HOLD queue.
The command:
CH J MYJOB CLASS=C
changes the class of job MYJOB in an z/OS environment
from C to a new class which is prompted. Additionally a new output
destination can also be specified in the prompt window. If there is more than
one copy of the job, use the job number parameter. If JES2.4.1 or a lower
version of JES2 is installed at your site, the specified job queue entry must
not be in the HOLD queue.
The command:
CH JV PARMJV,SHARE=Y WRITEPSWD=BOHR
makes job variable PARMJV shared, that
is, accessible to other users; modification of the job variable is password
protected.
The command:
CH SYS 3982 SI=SO FILE=2
prompts you for a new job class to which file SO-2 of job
number 3982 is to be redirected. The specified job file must be in
the HOLD queue.
Compares Natural sources stored in the Natural system file. For further information, see the example in the corresponding subsection of the section Common Objects.
Compresses the specified dataset.
The command:
COM D L99022.EDITOR.LOAD
compresses the dataset L99022.EDITOR.LOAD after
confirmation. You are notified of completion by a message.
Copies the specified object as another object of the same or different object type. You can enter target parameters as part of the command syntax.
Under z/OS, if the target dataset of a COPY D
dataset-name command does not exist,
you are prompted for a file allocation.
| Command | Function |
|---|---|
CP N NATLIB(MYPROG), P
MY.ONLY.SOURCE(PROG01) REP |
Copies Natural program MYPROG in
library NATLIB to PDS member PROG01 in dataset
MY.ONLY.SOURCE. If member PROG01 already exists in
the target library, it is replaced.
|
CP P MYLIB(ISP*),P
YOURLIB |
Copies all members in PDS library
MYLIB that start with ISP to the PDS library
YOURLIB.
|
CP LMS,NAT |
Prompts you first for the LMS element to be copied, then for the Natural object as destination. |
See also the subsection Copying Objects in the
section Useful Features, as well as the
COPY local
command.
Displays the specified Natural DDM.
| Command | Function |
|---|---|
DF V
PERSONNEL |
Displays the field definitions in the
PERSONNEL view.
|
DF V P* |
Displays a list of views starting with
P. You can mark a view with any character to display the field
definition.
|
Deletes the specified object from the system file or system environment after confirmation.
The command:
CONFIRM OFF;D N NATLIB(NATMEM)
deletes, without the confirmation prompt, the Natural member
NATMEM from the library NATLIB.
Opens an edit session with the Predict long description of the selected Natural object, Natural view or any other Predict object type in Editor format. You can modify the description as required.
The command:
DS N NATLIB(MYPROG)
starts an edit session with the Predict description of Natural program
MYPROG in library NATLIB.
Note:
A Predict entry must exist for the selected object.
Note:
Not available for LMS versions.
The DIFFERENCE function is available for any
previous version of a versioned object. It displays the current version
together with any changes made during the period between the selected version
and current version. Changes are indicated by highlighting and a corresponding
remark in the prefix area.
For example, the command:
DI NV MBE(MYPROG)
opens a window prompting you for the date and time of a previous
version for Natural member MYPROG in library MBE. It
is more common, however, to issue the DIFFERENCE
function as a line command from a list of previous versions for the member.
See the subsection Versioning in the section Useful Features for an example.
In addition to the EXPORT command, which
usually handles text only, the DOWNLOAD command also
downloads binary data. Currently it is available for the following Natural ISPF
objects:
| Object | Explanation |
|---|---|
N Natural
|
Objects and sources as well as data areas and maps are processed. |
V Views
|
Text and binary download possible. |
P PDS members
|
Load modules are handled. |
The command format is:
DOWNLOAD object-type object-id, SOURCE BINARY OBJECT DESTINATION=file.ext
The keywords SOURCE BINARY OBJECT are evaluated for views
and Natural members only. They have no meaning when downloading PDS members.
Any combination of these keywords can be entered in one command, allowing
Natural source and object to be downloaded in a single command. If multiple
download types are entered, the DESTINATION parameter
cannot be entered.
The DESTINATION parameter can be used to enter
the PC file name.
| Command | Function |
|---|---|
DOWNLOAD PDS ML(PROG1),
DEST=PROG1.NCD |
Downloads the load module PROG1 to
PROG1.NCD in your working directory, if ML is an
abbreviation of an z/OS load library.
|
DOWNLOAD NAT MYPROG, SOURCE
OBJEC |
Downloads source and object of Natural program
MYPROG. Entire Connection prompts for PC file names.
|
DOWNLOAD V EMPLOYEES,
BINARY |
Downloads view (DDM) EMPLOYEES in
binary format. Entire Connection prompts for PC file name.
|
All PC files created with a Natural ISPF
DOWNLOAD command can be processed by the
UPLOAD command.
Note:
You can transfer data to a PC only if you are using a PC to emulate
a mainframe terminal with Software AG's Entire Connection.
Starts an edit session with the specified object. If the object does not exist, it is created.
| Command | Function |
|---|---|
E N
NATLIB(MYPROG) |
Starts an edit session with Natural member
MYPROG in library NATLIB.
|
E P
MYLIB(EX*) |
Opens a window with a list of all members
starting with EX in the PDS library MYLIB. You can
type another prefix in the window to modify the list, or mark a member with any
character to start the edit session.
|
E MYPROG |
Assuming NAT is set as default
object type and NATLIB as default library name in your user
profile, this command entered from the Natural ISPF Main Menu is sufficient to
start an edit session with member MYPROG in the default
library.
|
The ENTRY command displays the Entry Panel
for the specified object type, for example, the command:
EN NAT
displays the Natural Objects Entry Panel. Usually, the system administrator uses this command in menu definition (see the section Menu Maintenance in the Natural ISPF Administration Guide). When working with Natural ISPF, you will normally display an Entry Panel by selecting an option from the Main Menu.
If you use this command as a line command
(EN), you can select a specific object from a list.
This invokes the Entry Panel for the object type, with the parameter fields
filled with the selected object's parameter values. This makes it easy to start
sessions with objects with similar names.
See the subsection ENTRY as Line Command in the section Useful Features for an example.
Executes the specified Natural object. The object must be cataloged
(CATALOG or STOW
command). If the object is a macro object, the generated output is written to
the user workpool (see also the section Macro Facility in the
Natural ISPF Programmer's Guide).
The command:
XE N NATLIB(MYPROG)
executes the Natural object MYPROG in library
NATLIB.
Exports the specified object to the specified target environment (PC or Software AG's automated office system Con-nect). For more details, including command syntax and available keywords, see the subsection Natural Interface to External Environments in the section Useful Features.
The command:
EX P MY.ONLY.SOURCE(MYMEM),PC
opens a window in which you can specify the PC file name under which
the PDS member MYMEM in library MY.ONLY.SOURCE is to
be downloaded.
When you use the EXPORT command from an
Editor session, the shortest possible abbreviation is EXP.
Note:
You can transfer data to a PC only if you are using a PC to emulate
a mainframe terminal with Software AG's Entire Connection.
The EXTENT command displays the extents for
a specific dataset, giving the disk address and cylinder size of each one.
The command:
ET D MBE.COMN.SOURCE
displays extent information for dataset MBE.COMN.SOURCE.
For an example of the EXTENTS command, see the
section z/OS Objects
in this documentation.
Displays all external references to a load module or CSECT (z/OS only).
The command:
XT P MBE.COMN.LOAD(NATPARM)
displays a list of external references to the load module
NATPARM in the load library MBE.COMN.LOAD. For an
example, see the subsection Load Modules and
CSECTs in the section z/OS Objects.
Instructs Natural ISPF to report progress of the specified job. The
status message remains in the message line until the job is in the output queue
(z/OS and z/VSE) or until job execution has been completed (BS2000). You
can discontinue the status reports by using the command FOLLOW
OFF.
The command:
FL J ISPINT
reports the status of job ISPINST in an z/OS environment
every time you invoke another system screen. If there is more than one copy of
the same job, you are notified with a message, and the copy submitted last is
selected.
If you use the FOLLOW command without
parameters, the job submitted last from Natural ISPF is the default.
This function command applies only to Natural objects of the type map.
The map layout is displayed in a Natural ISPF Editor session. Modifiable fields
(AD=A and AD=M) are replaced by a special filler
character which is the underscore (_). Variable output fields
(AD=O) are replaced by a period (.) .
The command:
FR ISPN---1
displays the map layout in an Editor session.
Issued for a job, this command puts the SYSOUT of the specified job on hold.
The command:
HL J ISPINST
puts the SYSOUT of job ISPINT on hold.
The HOLD command is also available for the
current version of an object (not applicable to LMS elements). Placing a member
in HOLD status means that it is not counted as an existing version
and will not be automatically deleted as further versions of the member are
created. For more information and an example, see the subsection
Versioning in the
section Useful Features.
Displays information about the specified object.
The command:
I N NATLIB(NATPROG)
displays information about Natural object NATPROG in
library NATLIB.
Displays a list of specified objects. You can select an object from a list for further handling using appropriate line commands (abbreviations of function commands).
Note:
The command LIST DS * gives a list of
short names for libraries at system and at user level (see the subsection
Library Definition
in the section Profile
Maintenance.
| Command | Function |
|---|---|
L N
NSPFWORK(ISPF*) |
Lists all Natural objects with prefix
ISPF in the library NSPFWORK.
|
L N SYSTEM(A*)
TYPE=PM |
Lists all Natural programs and maps whose names
start with A in library SYSTEM.
|
L N NATLIB(*)
MACRO=MODEL |
Lists all Natural objects in library
NATLIB that used macro object MODEL as edit
macro.
|
L P
MB(*INPL) |
Lists all PDS members in library with short
name MB with suffix INPL.
|
L A OP*
TYPE=J |
Lists all active standard-type jobs with prefix
OP (z/OS).
|
L N C < |
Lists all Natural members which start with a
value less than C in the current library.
|
Displays the output of CA Panvalet or CA Librarian protocol after a member is saved and refers to the member saved most recently.
Displays a list of files created by a specific BS2000 job. If the job is not explicitly specified, the job submitted most recently from your Natural ISPF session is selected.
| Command | Function |
|---|---|
OT PAN |
Displays the protocol of the saved member. |
OT BJ 1422 |
Displays a list of files created by the
BS2000 job identified by TSN 1422.
|
Executes the specified member as a Natural ISPF command script.
The command:
PLAY N MYLIB(SCRIPT)
executes the Natural member SCRIPT in the library
MYLIB as Natural ISPF commands. For more information and examples
of command scripts, see the subsection
Executing Command
Scripts in the section Useful Features.
The commands described below can be entered interactively but they are meant to be used in Natural ISPF command scripts.
| Command | Function |
|---|---|
CONTINUE |
Defines labels where processing is to continue after errors during execution of a command script. |
MACPARM
P112273 |
Used to enter input parameters in a script for a macro. |
MESSAGE |
Displays a message in the top right corner and
enters PAUSE mode.
|
REMARK |
Used to document a command script. |
Prints the specified object at the hard copy device selected as follows:
Printer specified in the function parameters;
Printer specified by name in your user profile;
Printer specified by name in your user group profile (for example, if
your user ID is ABC, profile A*);
Printer specified in prompt window that appears if an asterisk (*) is specified as printer in your user profile;
If no printer specification is made in your user profile, the printer defined in your TP environment;
If no printer is defined in your TP environment, the printer
specified by the Natural profile parameter PRINTER2.
| Command | Function |
|---|---|
PR N NATLIB
(MYPROG),PRINTER1 |
Prints Natural member MYPROG from
library NATLIB at printer PRINTER1. Automatic
carriage control is performed.
|
PR P MY.ONLY.
SOURCE(MYMEM),CC |
Prints PDS member MYMEM in library
MY.ONLY.SOURCE at the selected printer, honoring any ASA or
machine code characters in the member. No other headings are printed.
|
PR N
NSPF120(ISPEX1),WORKPOOL |
Prints Natural member ISPEX1 in
library NSPF120 to the user workpool.
|
PR J
COM444,NO |
Prints the SYSOUT of z/OS job
COM444. Automatic carriage control is deactivated.
|
PR N MYPROG, PRINTER= PRINTER7
COPIES=2 |
Prints two copies of Natural member
MYPROG from the current library at PRINTER7.
|
Note:
The functional parameter NO is available for
Natural and job SYSOUT only: without this parameter, automatic carriage control
is performed
Issue the PRINT command from an Editor
session with the object in EDIT or
BROWSE mode to print the member;
Note:
When issuing the PRINT command from an
Editor session, the current boundary settings (BNDS
Editor command) are respected: only the data within the set boundaries are
printed.
Use the Editor line command P to print
the selected line, or mark the first and the last lines of a block of text with
the Editor PP line command to print the block from
the member;
When issuing a PRINT command from an Editor
session, you can use the special parameter ASIS as
follows:
PRINT,ASIS
If a printer is defined in your Natural ISPF profile, the whole Editor session is printed, including header, prefix, etc.
If an asterisk (*) is defined as printer in your Natural ISPF profile, you are prompted with the following window:
+-----------Print parameters------------+ ! ! ! Lines per page : 60 ! ! Take linesize from ! ! edit session : X ! ! or screensize : ! ! Print prefix : X ! ! Enter printer : _________ ! ! Listname : ________ ! ! Form : ____ ! ! Disp : L___ (D/H/K/L) ! ! Copies : (0-255) ! ! Log.-Driver : ________ ! ! Print via NOM : (Y/N) ! +---------------------------------------+ |
Meaning of the input fields:
| Input Field | Meaning | |
|---|---|---|
Lines per page |
Number of lines to be printed on a page before a page break. | |
Take linesize from edit session |
Mark this field if the line length of the printout is to correspond to the length of the edit session (this might be more than 80). | |
or screensize |
Mark this field if the line length of the printout is to correspond to the line length of your screen. | |
Print prefix |
Mark this field if you want the prefix area (line numbers, labels, etc.) printed. | |
Enter printer |
Enter printer name (this can also be Workpool). | |
Listname |
Specify a name of the printout. | |
Form |
Specify a printout form. | |
Disp |
Specify the disposition of the printout: | |
D or DEL |
Delete after printing (default). | |
H or HOLD |
Hold printout, do not print. | |
K or KEEP |
Keep after processing. | |
L or LEAV |
Leave in spool queue after printing. | |
Copies |
Specify number of copies (maximum is 255). | |
Log.-Driver |
Specify the name of a logical output driver routine to perform additional output formatting during printing. Note: |
|
Print via NOM |
Enter Y to use the
extended interface between Natural ISPF and Entire Output Management.
|
|
Purges the SYSOUT of a job from the job entry queue.
The command:
PG DJ ISPINST
purges the SYSOUT of job ISPINST from a z/VSE job entry
queue.
Releases a job, its output or a specific SYSOUT file (object-type
S, z/OS only) from HOLD status (when job has been
held explicitly) or from Hold Queue (when job output is associated with a held
output class).
Available function parameter (optional):
| Parameter | Meaning |
|---|---|
NEWCLASS=c |
Assigns new output class. Valid for z/OS objects only. |
Examples for use with function command syntax:
| Command | Function |
|---|---|
RL J ISPINT RL DJ
ISPINT |
Releases job ISPINT from Hold
status or from Hold queue, whichever applicable. If the job name is not unique,
specify job number.
|
RL J 3687 QUEUE=H
CLASS=O |
Releases held output of job 3687 from class
O and prompts for optional specification of a new class.
|
RL J 3687
CL=O,NEWCL=Y |
Releases held output of job 3687 from class
O and assigns new output class Y (without
prompting).
|
RL S ISPINT |
Prompts for the name and number of the required SYSOUT file to be released, and for optional specification of a new class. |
Note:
Only SM and SO files can be subject to
RELEASE operations.
Similar considerations apply for use as line command
(RL).
Renames the specified object to the new name specified in the function
parameters. If you enter the RENAME command without
the function parameter, a window is opened in which you can specify the new
name.
| Command | Function |
|---|---|
RN P
MYLIB(MYMEM),NEWMEM |
Renames member MYMEM to
NEWMEM in PDS library MYLIB.
|
RN LMV MYLIB(MYELEM/§),
VERSION=V001 |
Renames version § of element
MYELEM in LMS library MYLIB to
V001.
|
Compiles and executes the specified Natural program. If the program
uses the macro facility or contains the INCLUDE-MACRO statement,
the macros are executed and the output is written to the user workpool.
Displays a status message of the specified job.
The command:
ST J ISPINT
reports the status of job ISPINST in an z/OS environment.
If there is more than one copy of the same job, you are notified with a
message, and the copy submitted last is selected.
If you use the STATUS command without
parameters, the job submitted last from Natural ISPF is the default.
Submits the specified object to the operating system. You can follow
the submitted job with the FOLLOW and
STATUS commands. If the job control contains macros,
expansion is performed before submission, provided that the macro expansion has
been activated in your current User Defaults profile (see the subsection
User Defaults
in the section Profile Maintenance). In this case, you can
access the submitted object in the WORKPOOL facility.
The SUBMIT command can be issued with the
following function parameters:
| Parameter | Meaning |
|---|---|
TARGET |
Allows you to execute a JCL member on a node different from its physical location. |
TYPE |
Possible options:
|
| Command | Function |
|---|---|
SB N
NATLIB(MYPROG) |
Submits Natural program
MYPROG.
|
SB P MYLIB(MYPROG),TARGET=69
|
Submits PDS member MYPROG located
on the default node (usually 148) on Node 69.
|
Uncatalogs the specified Natural object or dataset.
The command:
U N NATLIB(MYPROG)
uncatalogs Natural program MYPROG.
In addition to the IMPORT command, which is
a local command in the Editor and handles text only, the
UPLOAD command also uploads binary data. Currently
it is available for the following Natural ISPF objects:
| Object | Explanation |
|---|---|
N Natural
|
Objects and sources as well as data areas and maps are processed. |
V Views
|
Text and binary upload possible. |
P PDS members
|
Load modules are handled. |
The command format is:
UPLOAD object-type object-id, SOURCE BINARY OBJECT FROM=file.ext REPLACE=YES
The keywords SOURCE BINARY OBJECT are evaluated for Views
and Natural members only. They have no meaning when uploading PDS members. Any
combination of these keywords can be entered in one command, allowing Natural
source and object to be uploaded in a single command. If multiple upload types
are entered, the FROM parameter cannot be entered.
The FROM parameter can be used to enter the PC
file name. The REPLACE parameter can be used to
overwrite an existing object.
Upload of a load module with REPLACE=YES should not be
interrupted, because the old module is deleted before starting the upload from
PC.
| Command | Function |
|---|---|
UPLOAD PDS ML(PROG1),
FROM=PROG1.NCD |
Uploads the load module PROG1 is
from PROG1.NCD from your working directory, if ML is an
abbreviation of an z/OS load library. Upload of load modules works only if the
PC files have been created with Natural ISPF
DOWNLOAD command. In addition, the
BLOCKSIZE of the source and target load library must be
identical.
|
UPLOAD NAT MYPROG, SOURCE
OBJECT |
Uploads source and object of the Natural
program MYPROG. Entire Connection prompts for PC file
names.
|
UPLOAD V EMPLOYEES, BINARY
REP=YES |
Uploads view (DDM) EMPLOYEES in
binary format. Entire Connection prompts for PC file name. If view
EMPLOYEES already exists, it is replaced.
|
Note:
You can transfer data from a PC only if you are using a PC to
emulate a mainframe terminal with Software AG's Entire Connection.
Displays a list of Zaps applied to the specified load module or CSECT (z/OS only).
| Command | Function |
|---|---|
ZP P
JWO.COMN.LOAD(NATPARM) |
Displays a list of Zaps applied to the load
module NATPARM in the specified load library. The list shows CSECT
name, date and IDR-DATA.
|
ZP CST |
Opens a window in which you can specify the CSECT for which to list Zaps. |
Local commands are object-specific and can be issued only when
displaying an object in Editor format in LIST,
EDIT or BROWSE mode. If
you enter an asterisk (*) in the command line, a window opens that lists all
valid local commands and you can select a command for execution. Some local
commands are available only in LIST mode, others
only in EDIT or BROWSE
mode.
This subsection describes all local commands in alphabetical order according to object type. Valid abbreviations of local commands are indicated in the command title.
Copies a specified object into the current edit session. The place at
which the copied object is to be inserted must be marked by appropriate Editor
line commands (A, B,
O or OO). The following
object types can be copied:
| Object type | Meaning |
|---|---|
BF |
BS2000 file |
D |
Dataset (sequential) |
DJ |
Job (z/VSE) |
FIL |
z/VSE file |
J |
Job (z/OS) |
LIB |
CA Librarian member |
LMS |
LMS library element |
LMV |
LMS element version |
LV |
CA Librarian member version |
MAC |
Macro object |
MEM |
z/VSE member |
N |
Natural object |
O |
Output file in workpool |
P |
PDS member |
PAN |
CA Panvalet member |
S |
Job SYSOUT (z/OS) |
USR |
Natural ISPF user profile |
V |
Database view |
You can issue the COPY local command with
full name parameters, for example:
COPY MAC library (name)
If you issue the COPY command without
parameters, you are prompted for object type and name. For special
considerations that apply when copying Natural objects and views, see the
subsection Natural
Objects and the subsection
Natural Views
in the section Common Objects.
Copies the specified PC file or Con-nect document into the edit area.
If the edit area already contains data, you must mark the place at which you
want the file or document copied with Editor line commands
A (after this line) or B
(before this line).
The command format is:
IMPORT [CNT / CONNECT]
[PC]
Prompt windows open to prompt you for identifiers of the file or document you wish to copy.
For more information, including examples, see the subsection Natural Interface to External Environments in the section Useful Features.
To import Natural objects in binary form, use the
UPLOAD
command as described in the section Function Commands.
Opens a window with your current edit profile. You can modify any parameter by overtyping the value.
The command format is:
SET
Executes a command or command sequence for all objects shown in the list. For details, see the subsection ALL Command for Lists in the section Useful Features.
The command format is:
ALL command-string
Opens a window in which you can define a new layout for the list. For details, see the subsection LAYOUT Command for Lists in the section Useful Features.
The command format is:
LAYOUT
Rebuilds the list to reflect changes from line commands such as
DELETE, RENAME or
EDIT. For details, see the subsection
RELIST Command for
Lists in the section Useful Features.
The command format is:
RELIST
When displaying lists of objects, you can use the Editor
SORT command with special parameters:
SORT [column-header] [a] [d]
Where a is ascending order (default), d is
descending order and column-header is the string of
the column header according to which the items in the list are to be sorted.
For details, see the subsection SORT Command for
Lists in the section Useful Features.
Issued from a view definition displayed using the
DEFINITION function command, generates data
definition statements for a Natural source.
Catalogs multiple Natural objects displayed in a list. The command format is:
CATALL [name] [type]
where name can be an optional
name pattern, and type an optional
Natural object type.
| Command | Function |
|---|---|
CATALL ISP* |
Catalogs all Natural objects in the list whose
names start with ISP.
|
CATALL ISP*
P |
Catalogs all Natural programs in the list whose
names start with ISP.
|
Note:
If you issue the CATALL command for
objects that do not use the macro facility, it is recommended that you issue a
MACRO OFF command first, otherwise resources are
wasted as the objects are searched for the macro character. If any object uses
the macro facility, you must have MACRO
ON.
Stores the edited Natural member in object form only (the source remains unchanged).
Checks syntax of current Natural object. If the object is a macro-type
program, only a check of processing statements and variables to be substituted
is performed. The CHECK local command does not check
that the lines generated by the macro are valid Natural source. To do this,
execute the macro, and copy its generated output from the user workpool as a
Natural program into a Natural library (see the subsection
User Workpool in
the section Common Objects).
Starts an edit session with the output of the current program in the
user workpool (only valid after a RUN command issued
from the edit session).
Available for Natural programs written using the Edit macro option. Reexecutes the specified macro object and writes the result in the current edit session. Any defined user code remains in place. For details, see the section Macro Facility in the Natural ISPF Programmer's Guide.
Stores the Natural program in source and object form. The text parameter is relevant when stowing the program with versioning on: you can specify a reason for changing the program. The text must be enclosed in quotation marks.
Note:
If the current Natural program includes inline macros and/or
INCLUDE-MACRO statements, macro expansion is performed before
compilation (MACRO ON must be set).
Performs structural indentation of Natural source statements and identifies any structural inconsistencies. This command does not apply to macro objects.
Enables/disables structured mode. The command format is:
SM [ON] [OFF]
Specifies Natural object type. The command format is:
TYPE t
where t can be any of the following:
C |
Copy code |
H |
Help routine |
N |
Subprogram |
O |
Macro program |
P |
Program |
S |
Subroutine |
T |
Text |
In BROWSE
mode:
|
Displays the next existing error message. |
In EDIT
mode:
|
The current message is saved automatically if
it has been modified. Then, an EDIT session is
opened with the next existing error message.
|
Job SYSOUT is displayed in BROWSE mode only.
Selects SYSOUT file for display. The command format is:
[FILE] [SI] [n]
[SO]
[SM]
[CC]
[JL]
where n stands for file number.
Selects next SYSOUT file for display.
Selects previous SYSOUT file for display.
The following commands apply to object types PDS,
MEM, LMS, DS, FIL and
BF.
This command is available when editing files that are password-protected for update.
The command format is:
PASSWORD password
Use this command to enter the valid password in order to update the protected file.
Available for source members written using the Edit macro option. Reexecutes the specified macro object and writes the result in protected lines in the current edit session. Any defined user code remains in place. For details, see the section Macro Facility in the Natural ISPF Programmer's Guide.
If the member contains JCL, you can submit the job to the operating
system from the edit session with the SUBMIT local
command.
When selecting a member for EDIT from the
VSE Members Entry Panel, or when displaying a member in edit mode, the
following local commands are available:
Specifies whether MSHP protection is to be bypassed YES
or NO. The command format is:
MSHP [YES]
[NO]
Specifies whether the member contains SYSIPT data
YES or NO. The command format is:
DATA [YES]
[NO]
Applies to object types LMS and LMV.
Use this command to specify a new element name and/or a new version name, to be written when saving a member. The command format is:
NEWNAME [ename][nversion]
If you issue the NEWNAME command without
parameters, a window opens in which you can specify the new name and/or version
name. For more details, see the subsection
LMS Library
Elements in the section BS2000
Objects.
When scrolling help or information screens, you can use the
UP command with the parameter
LEVEL to move directly to the next higher level in the
screen hierarchy.
The command format is:
UPLEVEL BACK
Assuming the UP command is assigned to
PF7, you can type L in the command line and press
PF7.