Version 9.6
 —  Software AG IDL Extractor for COBOL  —

IDL Extractor for COBOL Preferences

The IDL Extractor for COBOL preferences are used to manage COBOL extractor environments. A COBOL extractor environment provides defaults for the extraction and refers to COBOL programs and copybooks

COBOL extractor environments are offered in the IDL Extractor for COBOL wizard to reference the COBOL programs and copybooks and retrieve defaults for the IDL extraction. To create, edit, duplicate and remove COBOL extractor environments, open the Preferences page and use the buttons on the right.

graphics/prefs.png


Create New Local Extractor Environment (z/OS, z/VSE, BS2000/OSD and IBM i)

This section describes the four steps for creating a new local COBOL extractor environment to extract z/OS, z/VSE, BS2000/OSD or IBM i COBOL programs.

Step 1: Define the New Local Environment

On the New Environment page you can specify Name and Operating system.

graphics/prefs_defineNewLocal.png

Start of instruction setTo define the new environment settings

  1. Enter a unique Name for the COBOL extractor environment.

  2. Select the Operating system.

  3. Select "Local" for Source Location.

Step 2: Define the Default Settings

The Default Settings page provides defaults for Step 4: Define the Extraction Settings and Start Extraction in Using the IDL Extractor for COBOL - Overview. You can set defaults for interface type and COBOL to IDL mapping.

graphics/prefs_local-mainframe_default.png

Start of instruction setTo define the default extraction settings

  1. Select the default Interface Type. See Supported COBOL Interface Types.

  2. Depending on the interface type, additional information can be set. For interface type

    For more information refer to Step 4: Define the Extraction Settings and Start Extraction.

  3. Specify a default value for COBOL to IDL Mapping. See COBOL to IDL Mapping.

Press Next and continue with Step 3: Define the Local Extractor Environment below.

Step 3: Define the Local Extractor Environment

On the Local Extractor Environment page you can provide a default directory name for the COBOL programs:

graphics/prefs_local-mainframe_extractorEnv.png

  1. Choose Workspace... or File System... to browse for a folder.

  2. Choose Next and continue with Step 4: Define the Local Copybook Locations below.

Step 4: Define the Local Copybook Locations

On the Local Copybook Location page you can add directories that will be used to resolve copybooks. Copybooks and members referenced with COPY statements, CA Librarian -INC statements and CA Panvalet ++INCLUDE statements will be searched for in the defined local directories:

graphics/prefs_local-mainframe_copybook.png

The file extensions for copybooks can also be entered. If no extensions are specified, the IDL Extractor for COBOL wizard will try to locate copybooks without any file extensions.

Press Workspace... or File System... to browse for a folder.

Press Finish.

Top of page

Create New Local Extractor Environment for Micro Focus (UNIX and Windows)

This section describes the four steps for creating a new local COBOL extractor environment to extract Micro Focus COBOL programs.

Step 1: Define the New Local Environment

graphics/prefs_local-microFocus_localEnv.png

On the New Environment page you can specify the Name and Operating system. Only UNIX and Windows operating systems can be used for Micro Focus COBOL.

Start of instruction setTo define the default extraction settings

  1. Enter a unique name for the COBOL extractor environment.

  2. Select the Operating system "UNIX" or "Windows".

  3. Select "Local" for Source location.

Step 2: Define the Default Settings

The Default Settings page provides defaults for Step 4: Define the Extraction Settings and Start Extraction in Using the IDL Extractor for COBOL - Overview.

You can set defaults for Interface type, Compiler directives and COBOL to IDL Mapping.

graphics/prefs_local-microFocus_default.png

Start of instruction setTo define the default extraction settings

  1. Refer to Step 2: Define the Default Settings for a local extractor environment for field descriptions. Select the default Interface type. See Supported COBOL Interface Types.

  2. Select a value for Meaning of PIC N without USAGE clause. Select "NATIONAL" for IDL mapping to data type U, or "DISPLAY-1" (DBCS) for data type K. "DISPLAY-1" (DBCS) is the default, which is the same as Micro Focus compilers. See also COBOL to IDL Mapping.

  3. Select the source code format. Use "Fixed" (default) or "Variable" to change the interpreted source code columns. Refer to your Micro Focus documentation for further information.

  4. Enter the TAB stop width. Typical values are 4 or 8 (default).

  5. Specify the default COBOL-to-IDL Mapping. See COBOL to IDL Mapping.

  6. Choose Next and continue with the Step 3: Define the Local Extractor Environment below.

    Refer to Step 2: Define the Default Settings for a local extractor environment for field descriptions.

Step 3: Define the Local Extractor Environment

On the Local Extractor Environment page you can provide a default directory name for the COBOL programs:

graphics/prefs_local-mainframe_extractorEnv.png

  1. Choose Workspace... or File System... to browse for a folder.

  2. Choose Next and continue with Step 4: Define the Local Copybook Locations below.

Step 4: Define the Local Copybook Locations

On the Local Copybook Location page you can add directories that will be used to resolve copybooks. Copybooks and members referenced with COPY statements, CA Librarian -INC statements and CA Panvalet ++INCLUDE statements will be searched for in the defined local directories:

graphics/prefs_local-microFocus_copybook.png

The file extensions for copybooks can also be entered. If no extensions are specified, the IDL Extractor for COBOL wizard will try to locate copybooks without any file extensions.

Choose Workspace... or File System... to browse for a folder.

Choose Finish.

Top of page

Create New Remote Extractor Environment (z/OS)

This section describes the four steps for creating a new remote COBOL extractor environment to extract remotely z/OS COBOL programs stored in partitioned data sets or CA Librarian data sets.

Step 1: Define the New Remote Environment

On the New Environment page you can specify Name, Operating system and the Remote Source Location.

graphics/prefs_remote-zos_remoteEnv.png

Start of instruction setTo define the new environment settings

  1. Enter a unique name for the COBOL extractor environment.

  2. Select the Operating system.

  3. Select "Remote" for Source location.

Step 2: Define the Default Settings

The Default Settings page provides defaults for Step 4: Define the Extraction Settings and Start Extraction in Using the IDL Extractor for COBOL - Overview.

You can set defaults for Interface Type and COBOL to IDL Mapping.

graphics/prefs_local-mainframe_default.png

Start of instruction setTo define the default extraction settings

Press Next and continue with Step 3: Define the Remote Extractor Environment below.

Step 3: Define the Remote Extractor Environment

The connection to the Extractor Service to browse for COBOL programs is defined on the Remote Extractor Environment page. See Extractor Service.

graphics/prefs_remote-zos_extractorEnv.png

Start of instruction setTo define the remote extractor environment

  1. Under Broker Parameters, enter the required fields Broker ID and Server Address, which will have the default format brokerID@serverAddress. The last part (broker service) of the server address must always be "EXTRACTOR". The timeout value must be in the range 1-9999 seconds (default is 60).

  2. The EntireX Authentication parameters describe the settings for the broker. See Authentication of User.

  3. The RPC Server Authentication parameters describe the settings for the RPC server. See Administering the Batch RPC Server | Administering the EntireX RPC Server under z/OS IMS.

  4. A high-level qualifier is required in the Data Set Name or HLQ field. The extractor service will then offer only data sets with this high-level qualifier.

  5. In the Member Name field you can provide a prefix for the partitioned data set or CA Librarian members. The extractor service will then offer only members beginning with this prefix.

Press Next and continue with Step 4: Define the Remote Copybook Locations below.

Step 4: Define the Remote Copybook Locations

On the Remote Copybook Location page you can add PDS or CA Librarian data sets that will be used to resolve copybooks. Copybooks and members referenced with COPY statements and CA Librarian -INC statements will be searched for in the defined remote data sets:

graphics/prefs_remote-zos_copybook.png

Press Insert... to add a new data set entry in the table. Use Remove, Up and Down to manage the data set list.

Press Finish.

Top of page

Create New Remote Extractor Environment (BS2000/OSD)

This section describes the four steps for creating a new remote COBOL extractor environment to extract remotely BS2000/OSD COBOL programs stored in LMS libraries.

Step 1: Define the New Remote Environment

On the New Environment page you can specify Name, Operating system and the Remote Source Location.

graphics/prefs_remote-bs2_remoteEnv.png

Start of instruction setTo define the new environment settings

  1. Enter a unique name for the COBOL extractor environment.

  2. Select the Operating system.

  3. Select "Remote" for Source location.

Step 2: Define the Default Settings

The Default Settings page provides defaults for Step 4: Define the Extraction Settings and Start Extraction in Using the IDL Extractor for COBOL - Overview.

You can set defaults for Interface Type and COBOL to IDL Mapping.

graphics/prefs_remote-bs2_default.png

Start of instruction setTo define the default extraction settings

  1. Select the default Interface Type. See Supported COBOL Interface Types.

  2. Specify the default COBOL to IDL Mapping. See COBOL to IDL Mapping.

Press Next and continue with Step 3: Define the Remote Extractor Environment below.

Step 3: Define the Remote Extractor Environment

The connection to the Extractor Service to browse for COBOL programs is defined on the Remote Extractor Environment page. See Extractor Service in the BS2000/OSD Batch RPC Server documentation.

graphics/prefs_remote-bs2_extractorEnv.png

Start of instruction setTo define the remote extractor environment

  1. Under Broker Parameters, enter the required fields Broker ID and Server Address, which will have the default format brokerID@serverAddress. The last part (broker service) of the server address must always be "EXTRACTOR". The Timeout value must be in the range 1-9999 seconds (default is 60).

  2. The EntireX Authentication parameters describe the settings for the broker. See Authentication of User.

  3. The RPC Server Authentication parameters describe the settings for the RPC server. See Configuring the RPC Server.

  4. A high-level qualifier can be entered in the LMS Library Name or HLQ field. The extractor service will then offer only LMS libraries with this high-level qualifier. You can use wildcard notation with asterisk to specify a range of values.

  5. In the Element Name field you can provide a prefix for LMS library source elements. The extractor service will then offer only COBOL programs beginning with this prefix.

Press Next and continue with Step 4: Define the Remote Copybook Locations below.

Step 4: Define the Remote Copybook Locations

On the Remote Copybook Location page you can add directories that will be used to resolve copybooks. Copybooks referenced with COPY statements will be searched for in the defined remote LMS libraries:

graphics/prefs_remote-bs2_copybook.png

Press Insert... to add a new data set entry in the table. Use Remove, Up and Down to manage the list of LMS libraries.

Press Finish.

Top of page