Reporting

This section describes the Reports function which is used to generate reports that help overview your network environment to define objects, monitor the system and plan workloads.

This section covers the following topics:

Related Topic:

  • See also the cross-reference reports described in the section Cross-References.


Report Types

The report types available you can select from the Reports References menu are described in the following table. Reports that require special user privileges are indicated in the table.

Report Type Description
Log - reports

(see below)

The LOG - reports (Reports 1 through 5) provide job or network processing information for a given date/time range, extracted from the Entire Operations log. The following applies to all job logs:

Only those networks are displayed for which the user has read access. The user has read access if:

See also Log Reports in the section Generating Batch Reports.

Log - Terminated Jobs Lists all jobs that ended normally (OK).

See also Example of Log - Terminated Jobs.

Log - Abended Jobs Lists all jobs that ended abnormally (not OK).

See also Example of Log - Abended Jobs.

Log - Jobs not started Lists all jobs that were not started.

A job cannot start, for example, if its latest start time exceeded, or if it is waiting for an input condition or a resource.

See also Example of Log - Jobs not started.

Log - Jobs with permanent errors Lists all jobs that fail to run because of permanent errors.

See also Example of Log - Jobs with permanent errors.

Log - Networks not activated Lists all networks that could not be activated, because an extraction or activation error occurred.

See also Example of Log - Networks not activated.

Accounting Information Information on job accounting data (for example, job elapsed times and CPU times) of previous network and job executions.

See also Example of Accounting Information.

Network Description (short) Displays information on networks and jobs as defined on the master database, including scheduling information, prerequisites and End-of-Job checking and actions.

See also Example of Network Description (short).

Network Description (detailed) Displays the same information as the Network Description (short), but includes all prose descriptions defined at the network, job or event level using the Editor facility.

See also Example of Network Description (detailed and with JCL).

Network Description (with JCL) Displays the same information as Network Description (detailed) and, additionally, outputs the JCL of each job with JCL location BS2, LMS, NAT, PDS, LIB or VSE.

Note:
For security reasons, no Entire System Server logons are performed. This means that the user must already have logged on to each node containing JCL (or the node must be started with the AUTOLOG=YES parameter).

See also Example of Network Description (detailed and with JCL).

Network Job Flow Display Provides an overview of the job flow within a network. The output can be sent to the screen or printer.

See also Example of Network Job Flow Display.

Schedule of Jobs Displays a jobs schedule for a specific date range.

See also Example of Schedule of Jobs.

Network Start Summary Status report of all network starts for a given day, regardless of whether they:
  • are waiting for prerequisite resources;

  • have already been executed;

  • are currently being executed;

  • have already been completed.

See also Example of Network Start Summary.

Network Schedule Overview Overview of scheduled and/or not yet executed, system-wide network activations.

See also Example of Network Start Summary.

Activation Overview Overview of network activations.

See also Example of Activation Overview.

Compare Symbol Tables (Special user authorization required.)

Displays the results of the comparison of one or more symbol tables.

See also Example of Compare Symbol Tables.

Compare Networks (Special user authorization required.)

Displays the results of the comparison of one or more networks.

The report shows whether jobs defined in one network exist also in another network. Additionally the attributes of the networks and of all jobs having the same name are compared.

To generate a report in batch, see Compare Networks in Batch for further information.

See also Example of Compare Networks.

Node Overview (Special user authorization required.)

Overview of available nodes.

See also Example of Node Overview.

Network/Job Usage (Special user authorization required.)

Lists networks and related subnetworks (jobs of the type NET) as well as jobs activated by an End-of-Job action or a recovery job.

See also Example of Network/Job Usage.

Generating Online Reports

This section provides instructions for generating a report in online mode with the Reports function.

Report data is evaluated for the current day.

Note:
The selection options provided to generate a report allow extremely flexible reporting. On the other hand, it allows you to formulate requests that will cause very many Adabas calls. For this reason, it is possible to disallow asterisk/wildcard report selection for non-administrator users: see Range Specification and Usage Restrictions.

Start of instruction set To generate a report

  1. From the Main Menu, choose Reports and press ENTER.

    Or:
    In the Command field of the Main Menu, type Option Code 8 or type REPORTS (see Direct Commands) and press ENTER.

    Or:
    You can skip this step if you know the number of the report type (for example, 14 for Activation Overview) you want to generate:

    In the Command field of the Main Menu, type Option Code 8.14 and press ENTER.

    A Reports menu similar to the example below appears:

     04.12.19                ***** Entire Operations *****                13:14:13 
     Owner SAG                          Reports                    User ID SAG     
     ------------------------------------------------------------------------------
                                                                                   
          Reports                                 Reports                          
                                                                                   
       1  Log - Terminated Jobs               15  Compare Symbol Tables            
       2  Log - Abended Jobs                  16  Compare Networks                 
       3  Log - Jobs not started              17  Node Overview                    
       4  Log - Jobs with permanent errors    18  Network/Job Usage                
       5  Log - Networks not activated                                             
       6  Accounting Information                                                   
       7  Network Description (short)                                              
       8  Network Description (detailed)                                           
       9  Network Description (with JCL)                                           
      10  Network Job Flow Display                                                 
      11  Schedule of Jobs                                                         
      12  Network Start Summary                                                    
      13  Network Schedule Overview                                                
      14  Activation Overview                                                      
     Command => ____________________________________________________________       
                                                                                   
                                                                                   
    Enter-PF1---PF2---PF3---PF4---PF5---PF6---PF7---PF8---PF9---PF10--PF11--PF12---
          Help        End                                                   Menu

    The menu displays a list of selectable report types.

  2. Choose a report and press ENTER.

    Depending on the report type selected, a selection window similar to the examples below opens for

    Report types 1 through 12:

    +--------------------------------------------------------------+
    !                                                              !
    !  Log - Abended Jobs                                          !
    !                                                              !
    !  Owner......: __________    (Blank for all, * for selection  !
    !  Network....: __________     or * and PF4 to process all     !
    !  Version....:                matching objects)               !
    !  Job........: __________                                     !
    !                                                              !
    !  Destination: 1                                              !
    !     1 - Screen  2 - Printer  3 - PC  4 - PC-CSV              !
    !                                                              !
    ! Enter-PF1---PF2---PF3---PF4---PF5---PF6---PF7---PF8---PF9--- !
    !       Help        End   Apply Accpt                          !
    +--------------------------------------------------------------+

    Report type 13 (Network Schedule Overview):

    +---------------------------------------------------------+
    |                                                         |
    |   Network Schedule Overview: Type                       |
    |                                                         |
    |  A Extractions + Schedule, sorted by network, time      |
    |  B Extractions only,       sorted by network, time      |
    |  C Extractions only,       sorted by time               |
    |  D Extractions + Schedule, sorted by time, network      |
    |                                                         |
    |  Type    ==> A                                          |
    |                                                         |
    |  Enter------PF3-----------------------------------      |
    |             End                                         |
    +---------------------------------------------------------+

    Reports type 14 (Activation Overview):

    +------------------------------------------------------+
    |                                                      |
    |              Activation Overview: Type               |
    |                                                      |
    |  Select one or more of these Activation Types:       |
    |  * All types               A API                     |
    |  M Manual                  O EOJ                     |
    |  R Recovery                S Scheduled               |
    |                                                      |
    |  Type    ==> *_______                                |
    |                                                      |
    |  Enter------PF3-----------------------------------   |
    |             End                                      |
    +------------------------------------------------------+

    Report type 15 (Compare Symbol Tables):

    +--------------------------------------------------------------+
    |                                                              |
    |     Compare Symbol Tables                                    |
    |                                                              |
    |      1                           2                           |
    |      Owner.......: NOPALL____    Owner.......: NOPALL____    |
    |      Table.......: __________    Table.......: __________    |
    |      Version.....: __________    Version.....: __________    |
    |                                                              |
    |      Show.......: D                                          |
    |         A - All     D - Differences  M - Message only        |
    |      Destination: 1                                          |
    |         1 - Screen  2 - Printer  3 - PC                      |
    |                                                              |
    |                                                              |
    | Enter-PF1---PF2---PF3---PF4---PF5---PF6---PF7---PF8---PF9--- |
    |       Help        End   Apply Accpt                          |
    +--------------------------------------------------------------+

    Report type 16 (Compare Networks):

    +--------------------------------------------------------------+
    |                                                              |
    |     Compare Networks                                         |
    |                                                              |
    |      1                           2                           |
    |      Owner.......: NOPALL____    Owner.......: NOPALL____    |
    |      Network ....  __________    Network ....  __________    |
    |      Version.....: __________    Version.....: __________    |
    |                                                              |
    |      Show.......: D                                          |
    |         A - All     D - Differences  M - Message only        |
    |      Destination: 1                                          |
    |         1 - Screen  2 - Printer  3 - PC                      |
    |                                                              |
    |                                                              |
    | Enter-PF1---PF2---PF3---PF4---PF5---PF6---PF7---PF8---PF9--- |
    |       Help        End   Apply Accpt                          |
    +--------------------------------------------------------------+

    Report type 17 (Node Overview):

    +------------------------------------------------------+
    |                                                      |
    |  Node Overview                                       |
    |                                                      |
    |  Node Range                                          |
    |  from..: ____1                                       |
    |  to....: 99900                                       |
    |                                                      |
    |  Destination: 1                                      |
    |     1 - Screen  2 - Printer  3 - PC  4 - PC-CSV      |
    |                                                      |
    |                                                      |
    |                                                      |
    | Enter-PF1---PF2---PF3---PF4---PF5---PF6---PF7---PF8- |
    |       Help        End                           Down |
    +------------------------------------------------------+

    Report type 18 (Network/Job Usage):

    +--------------------------------------------------------------+
    |                                                              |
    |     Network/Job Usage                                        |
    |                                                              |
    |      Used Job                    Using Job                   |
    |      Owner.......: EXAMPLE___    Owner.......: EXAMPLE___    |
    |      Network.....: __________    Network.....: __________    |
    |      Version.....: __________    Version.....: __________    |
    |      Job.........: __________    Job.........: __________    |
    |                                                              |
    |      Destination: 1                                          |
    |         1 - Screen  2 - Printer  3 - PC                      |
    |                                                              |
    |                                                              |
    |                                                              |
    | Enter-PF1---PF2---PF3---PF4---PF5---PF6---PF7---PF8---PF9--- |
    |       Help        End   Apply Accpt                          |
    +--------------------------------------------------------------+
  3. Enter the required selection criteria and choose PF4 or PF5, or ENTER for the report types 13, 14 and 17.

    An additional selection window similar to the example below opens for

    Report types 1 through 6:

    +----------------------------------------------------+
    |                                                    |
    |  Log - Abended Jobs                                |
    |             Date / Run Number Selection            |
    |                                                    |
    |  From Date 09.06.15  00:00   to 09.06.15  23:59    |
    |  From Run  1____             to 99999              |
    |                                                    |
    |  PF3  End                                          |
    +----------------------------------------------------+

    Report types 11 and 12:

    +---------------------------------------+ 
    |                                       | 
    |  Schedule of Jobs                     | 
    |                                       | 
    |      Start Date  ===> 09.06.15        | 
    |                                       | 
    |      End Date    ===> 09.06.15        | 
    |                                       | 
    |  Enter                    PF3 End     | 
    +---------------------------------------+ 

Fields and Columns: Reports

The input fields for specifying selection criteria and output options for the report to be produced are explained in the following table. The input fields correspond to the columns contained on the report output screen.

Depending on the report type (to be) produced, the following fields and columns are available:

Field/Column Description
Owner Name of an owner or a range of names.
Network Name of a network or a range of names.

Network Version

Name of a network version or a range of names.
Job (Applies to Log - reports and Job Schedule only.)

Name of a job or a range of names.

If no job name is defined, the corresponding output column on the report screen contains a dash (-).

From Date ... to

or

Start Date/End Date

Start date/time and end date/time of the reporting period.

Valid number range: 1 to 31.

Default: current date and time range 00:00 until 23:59.

For Monitor Tasks and Functions Overview and Example of Monitor Tasks and Exits Overview the default time range is 00:00 until the current time.

For Network Schedule Overview reports, the start and end dates can be in the past. In this case, only those network activations are logged, which have not yet been executed. These can be caused by symbol prompting, which has not been completed, or by an Entire Operations Monitor, that has not been active over an extended period of time.

See also Date and Time Formats.

From Run ... to Start and end run numbers for a range of active job networks.

Can be used only if owner and network have been selected.

Default range: 1 - 9999 (all)

Destination See Report Output Options.
Type

(Applies to Activation Overview only.)

Type of network activation.

Valid values:

* All types of activations.
   
M Activated manually.
   
R Activated by End-of-Job recovery processing.
   
A Activated by the activation API. NOPUAC5N (see the section API Routines).
   
O Activated by an End-of-Job action.
   
S Activated by a schedule.
Compare Networks/Symbol Tables reports only:
Show

Determines the amount of information to be shown for the compared networks.

Valid values:

A Shows all matching and differing objects and attributes.
   
D Shows only the differing objects with the differing attributes (default).
   
M Shows only a message if the comparison detected any differences.
Accounting Information/Schedule of Jobs reports only:
Step (Applies to z/OS only.)

Job step.

Step data is only collected if the Collect z/OS step accounting data option is enabled in the Entire Operations default settings: see Default Setting (3) in the Administration documentation.

JobID Job identifier as assigned by the operating system.
Start Start date/time of the job.

See also Date and Time Formats.

Stop End date/time of job.

See also Date and Time Formats.

Elapsed Estimated run time (in minutes) of the job.

BS2000:

Since the BS2000 LOGOFF message does not contain seconds, the elapsed time cannot be calculated exactly.

CPU Tm Estimated CPU time (in seconds) of the job.

UNIX:

CPU time information is written to the SYSOUT of UNIX jobs. For this purpose, the shell times command is used. The output is enclosed in the messages EOR0303 and EOR0304.

Example:

%% EOR0303 - times - Begin
0m0.121s 0m0.025s
0m0.043s 0m0.066s
%% EOR0304 - times - End

Notes:

  • With Entire System Server for UNIX Version 2.1.2 PL 4 and above, this output is used to determine the CPU time consumption of UNIX jobs. The CPU time is included in the Entire Operations accounting data.

  • For Sun Solaris:

    The times command output is useful only if the script frame (*.BF) is executed under the Korn shell. Therefore, the *.BF scripts on Sun Solaris are started under the Korn shell.

Averages from/to

Average values of all elapsed and CPU times for all jobs in the network.

Network/Job Usage reports only:
Used Job Networks and jobs used by single or multiple jobs.
Using Job Networks and jobs using a job as a subnetwork (job type NET), an End-of-Job (EOJ) action or a recovery job.
  Usage indicates the job use: Subnet, EOJ Activation or Recovery.
Node Overview reports only:
Server Name For mainframe nodes: a descriptive name.

For UNIX and Windows nodes: the name of the EntireX Broker service.

Node Range Range of node numbers from 1 to 99900.
Short Short name of a node.
AM

Access mode used:

N Mainframe nodes accessed through Entire Net-Work.
B UNIX and Windows nodes accessed through EntireX Broker.
L Applies to UNIX and Windows only.

Local node, invoked directly on the machine where Entire Operations is running.

Op. Sys. Operating system under which the node is running as received from the last SYSTEM-INFO call to Entire System Server or UNIX/Windows system information.
Wait a. Error Wait time after error.

Time in minutes to wait until next node access after a temporary error.

See also Date and Time Formats.

VSE SysId SYSID defined for a z/VSE node is added to the JCL of jobs submitted on this node.
SSU Submit Security User Type.

If empty, the system-wide default is in effect for this node.

Time Diff. Time difference between local time and GMT in hours if node is in a different time zone.
Valid

Indicates whether a node is available:

yes Node can be used.
no Node has been disabled.
NPR Version Current Entire System Server version of the node.
OS Release Information about the operating system (where available).

Range Specification and Usage Restrictions

If indicated in the table above, you can use an asterisk (*) or a smaller/greater than (< or >) wildcard character to determine a start or an end value (see also Valid Name Specifications in Direct Commands) or open a selection list of names.

The use of asterisk/wildcard report selection can be disallowed for non-administrator users (see User Definitions and Profile Settings in the Administration documentation).

By default, users of type A (system administrator) and O (operator) are allowed to use asterisk/wildcard selection; users of type G (general user) are not. It is not possible to disallow it for users of type A.

Special PF Keys: Reports

The following PF keys can be used to execute a function in a report selection window or navigate in a report output screen:

PF Key Name Function
PF3  End  Return to Reports or Cross-References menu, depending on the function performed.
PF4  Apply  Confirm selection criteria including "*" wildcards.

See also Confirming Selections.

PF5  Accpt  Confirm selection criteria.

If any object name has an asterisk (*), you will be prompted with a list of matching objects, from which you may select one and choose PF5 again.

See also Confirming Selections.

PF7 Up Scroll up in a report screen.
PF8

(or ENTER key)

Down Scroll down in a report screen.
PF10 Left Scroll left in a report screen.
PF11 Right Scroll right in a report screen.
PF12 Menu Return to Main Menu.

Confirming Selections

When you are satisfied with your selection, choose PF5 to move on to the date/time/run range selection window (where applicable) or to generate the report. However, if you choose PF4 rather than PF5, you will not be prompted - instead the report will include all objects which match your selection criteria.

Determination Date for Report Data

Report data is evaluated for the current day. This evaluation date needs to be considered, in particular, when you maintain different versions of networks and symbol tables with either fix versions or versions dynamically loaded on this date.

Report Output Options

The Destination field specifies the format for the report and the location where the report is written.

Enter one of the following option codes to select the required destination:

Option Description
1 The report will be written to the screen (default).
2 The report will be written to Printer 1 (which must be defined appropriately).
3 The report will be written to the PC (using Entire Connection and Printer 7).
4 The report will be written to a PC work file (using Entire Connection and Work File 7) in CSV (comma-separated value) file format, suitable for importing into a spreadsheet package.

Note:
This destination is not available for all reports.

User Restrictions for Reports

Administrator users (and reports run in batch) may report on any network in any owner. Non-administrator users, however, will only receive information on networks to which they have read access. A user is considered to have read access if:

  1. The user is linked to owner SYSDBA.

  2. The user is linked to the network owner.

  3. Access to the network has been explicitly granted to the user.

User authorization for performing report functions are granted in the default user profile as described in Reporting Functions in the Administration documentation.

Retention Period for Reports from Entire Operations GUI Client

Data generated for a report from Entire Operations GUI Client is retained for the number of days specified for active jobs in the Retention Periods of the Entire Operations default settings (see Default Setting (1) in the Administration documentation).

Older reports listed in the Reporting window of Entire Operations GUI Client are automatically removed after this period or during the next database cleanup (see also the Administration documentation).

Examples of Reports

This section contains examples of all types of reports you can generate with the Reports function:

Example of Log - Terminated Jobs

The following is an example of the report type Log - Terminated Jobs:

                                                   Entire Operations Log Report
-------------------------------------------------------------------------------
                                                                               
  Owner      Network    Job        Run   Date     Time  Message                
  ---------- ---------- ---------- ----- -------- ----- -----------------------
                                                                               
  EXAMPLE    E60-FLOW   JOB-01      3581 31.05.12 13:15 Ended ok               
  EXAMPLE    E60-FLOW   J07         3581 31.05.12 13:18 Ended ok               
  EXAMPLE    E60-FLOW   JOB-012     3581 31.05.12 13:33 Ended ok               
  EXAMPLE    E60-FLOW   JOB-013     3581 31.05.12 13:50 Ended ok               
  EXAMPLE    E60-FLOW   JOB-014     3581 31.05.12 14:07 Ended ok               
  EXAMPLE    E60-FLOW   JOB-015     3581 31.05.12 14:08 Dummy Job terminated   
  EXAMPLE    E52-LOGRES E52-J01     3974 01.06.12 01:01 Ended ok               
  EXAMPLE    E60-FLOW   JOB-019     3581 01.06.12 01:16 Ended ok               
  EXAMPLE    E60-FLOW   JOB-01      3582 01.06.12 13:16 Ended ok               
  EXAMPLE    E60-FLOW   J07         3582 01.06.12 13:18 Ended ok               
  EXAMPLE    E60-FLOW   JOB-012     3582 01.06.12 13:24 Ended ok               
  EXAMPLE    E60-FLOW   JOB-013     3582 01.06.12 13:32 Ended ok               
  EXAMPLE    E60-FLOW   JOB-014     3582 01.06.12 13:39 Ended ok               
 ************************************ m o r e *********************************
Enter-PF1---PF2---PF3---PF4---PF5---PF6---PF7---PF8---PF9---PF10--PF11--PF12---
                  End                           Down        Left  Right Menu

This report lists all terminated jobs for the network E60-FLOW in owner EXAMPLE.

The columns contained in the report are described in Fields and Columns: Reporting.

The PF keys are explained in Special PF Keys: Reports.

Example of Log - Abended Jobs

The following is an example of the report type Log - Abended Jobs:

                                                   Entire Operations Log Report
-------------------------------------------------------------------------------
                                                                               
  Owner      Network    Job        Run   Date     Time  Message                
  ---------- ---------- ---------- ----- -------- ----- -----------------------
                                                                               
  EXAMPLE    E01-CONTI  E01-J02       58 05.06.12 16:38 Ended not ok           
  EXAMPLE    E01-CONTI  E01-J02       58 05.06.12 16:38 Ended not ok - STEP02 C
  EXAMPLE    E01-CONTI  E01-J03       58 05.06.12 16:38 Ended not ok           
  EXAMPLE    E01-CONTI  E01-J03       58 05.06.12 16:38 Ended not ok - STEP03 S
  EXAMPLE    E01-CONTI  E01-J04       58 05.06.12 16:38 Ended not ok           
  EXAMPLE    E01-CONTI  E01-J04       58 05.06.12 16:38 Ended not ok - STEP03 C
  EXAMPLE    E01-CONTI  E01-J06       58 05.06.12 16:39 Ended not ok           
  EXAMPLE    E01-CONTI  E01-J06       58 05.06.12 16:39 Ended not ok - STEP06 U
  EXAMPLE    E01-CONTI  E01-J02       59 05.06.12 16:58 Ended not ok           
  EXAMPLE    E01-CONTI  E01-J02       59 05.06.12 16:58 Ended not ok - STEP02 C
  EXAMPLE    E01-CONTI  E01-J03       59 05.06.12 16:58 Ended not ok           
  EXAMPLE    E01-CONTI  E01-J03       59 05.06.12 16:58 Ended not ok - STEP03 S
  EXAMPLE    E01-CONTI  E01-J04       59 05.06.12 16:58 Ended not ok           
 ************************************ m o r e *********************************
Enter-PF1---PF2---PF3---PF4---PF5---PF6---PF7---PF8---PF9---PF10--PF11--PF12---
                  End                           Down        Left  Right Menu

This report displays all abended jobs for all networks beginning with E01-CONTI of the owner EXAMPLE.

The columns contained in the report are described in Fields and Columns: Reporting.

The PF keys are explained in Special PF Keys: Reports.

Example of Log - Jobs not started

The following is an example of the report type Log - Jobs not started:

                                                   Entire Operations Log Report
-------------------------------------------------------------------------------
                                                                               
  Owner      Network    Job        Run   Date     Time  Message                
  ---------- ---------- ---------- ----- -------- ----- -----------------------
                                                                               
  EXAMPLE    E60-FLOW   JOB-012     3596 21.06.12 00:00 E60-JOB1-O - 3596 - RUN
  EXAMPLE    E60-FLOW   JOB-013     3596 21.06.12 00:00 E60-J012-O - 3596 - RUN
  EXAMPLE    E60-FLOW   JOB-014     3596 21.06.12 00:00 E60-J013-O - 3596 - RUN
  EXAMPLE    E60-FLOW   JOB-015     3596 21.06.12 00:00 E60-J014-O - 3596 - RUN
  EXAMPLE    E60-FLOW   JOB-03      3596 21.06.12 00:00 E60-JOB2-O1 - 3596 - RU
  EXAMPLE    E60-FLOW   JOB-04      3596 21.06.12 00:00 E60-JOB3-O - 3596 - RUN
  EXAMPLE    E60-FLOW   JOB-05      3596 21.06.12 00:00 E60-JOB4-O - 3596 - RUN
  EXAMPLE    E60-FLOW   J07         3596 21.06.12 00:00 E60-JOB1-O - 3596 - RUN
  EXAMPLE    E52-LOGRES E52-J21     3993 21.06.12 08:00 E52-J01-OK - 3993 - RUN
  EXAMPLE    E52-LOGRES E52-J22     3993 21.06.12 08:00 E52-J01-OK - 3993 - RUN
  EXAMPLE    E52-LOGRES E52-J23     3993 21.06.12 08:00 E52-J01-OK - 3993 - RUN
  EXAMPLE    E52-LOGRES E52-J24     3993 21.06.12 08:00 E52-J01-OK - 3993 - RUN
  EXAMPLE    E52-LOGRES E52-J25     3993 21.06.12 08:00 E52-J01-OK - 3993 - RUN
 ************************************ m o r e *********************************
Enter-PF1---PF2---PF3---PF4---PF5---PF6---PF7---PF8---PF9---PF10--PF11--PF12---
                  End                           Down        Left  Right Menu

This report lists all jobs that were not started for all networks beginning from E60-FLOW of the owner EXAMPLE.

The columns contained in the report are described in Fields and Columns: Reporting.

The PF keys are explained in Special PF Keys: Reports.

Example of Log - Jobs with permanent errors

The following is an example of the report type Log - Jobs with permanent errors:

                                                   Entire Operations Log Report
-------------------------------------------------------------------------------
                                                                               
  Owner      Network    Job        Run   Date     Time  Message                
  ---------- ---------- ---------- ----- -------- ----- -----------------------
                                                                               
  XSETIDZ    K1         KFZ-AA01     818 15.06.12 15:44 MACRO Programm RZF-0001
  XSETIDZ    K1         KFZ-AA01     818 15.06.12 15:44 ... NOP-JCL/RZF-0001   
  XSETIDZ    K1         KFZ-AA02     818 15.06.12 15:44 Time Frame Setting     
  XSETIDZ    K1         KFZ-AA03     818 15.06.12 15:44 Time Frame Setting     
  XSETIDZ    K1         KFZENDE      818 15.06.12 15:44 MACRO Programm RZFENDE 
  XSETIDZ    K1         KFZENDE      818 15.06.12 15:44 ... NOP-JCL/RZFENDE    
  XSETIDZ    K1         KFZ20F15J    818 15.06.12 15:44 Subnetwork not found   
  XSETIDZ    K1         KFZ20F15J    818 15.06.12 15:44 ... RZF/KFZ20F15J      
  XSETIDZ    K1         KFZ30F15H    818 15.06.12 15:44 Subnetwork not found   
  XSETIDZ    K1         KFZ30F15H    818 15.06.12 15:44 ... RZF/KFZ30F15H      
  XSETIDZ    K1         KFZ40F15CV   818 15.06.12 15:44 Subnetwork not found   
  XSETIDZ    K1         KFZ40F15CV   818 15.06.12 15:44 ... RZF/KFZ40F15CV     
  XSETIDZ    K1         KFZ50F15R    818 15.06.12 15:44 Subnetwork not found   
 ************************************ m o r e *********************************
Enter-PF1---PF2---PF3---PF4---PF5---PF6---PF7---PF8---PF9---PF10--PF11--PF12---
                  End                           Down        Left  Right Menu

This report lists all jobs not started for all networks beginning with K1 of the owner XSETIDZ, and indicates the reason why the jobs failed to start.

The columns contained in the report are described in Fields and Columns: Reporting.

The PF keys are explained in Special PF Keys: Reports.

Example of Log – Networks not activated

The following is an example of a Log – Networks not activated report:

                                                   Entire Operations Log Report
-------------------------------------------------------------------------------
                                                                               
  Owner      Network    Job        Run   Date     Time  Message                
  ---------- ---------- ---------- ----- -------- ----- -----------------------
                                                                               
  REQUEST    P230426    -          11065 15.06.12 15:42 Latest Start 14.06 04:2
  REQUEST    P230426    -          11066 15.06.12 15:42 Latest Start 14.06 05:4
  REQUEST    P230426    -          11067 15.06.12 15:42 Latest Start 14.06 07:0
  REQUEST    P230426    -          11068 15.06.12 15:42 Latest Start 14.06 08:2
  REQUEST    P230426    -          11069 15.06.12 15:42 Latest Start 14.06 09:4
  REQUEST    P230426    -          11070 15.06.12 15:42 Latest Start 14.06 11:0
  REQUEST    P230426    -          11071 15.06.12 15:42 Latest Start 14.06 12:2
  REQUEST    P230426    -          11072 15.06.12 15:42 Latest Start 14.06 13:4
  REQUEST    P230426    -          11073 15.06.12 15:42 Latest Start 14.06 15:0
  SN         KSM-001    -             48 15.06.12 15:42 Latest Start 14.06 22:1
  EXAMPLE    E52-LOGRES -           3988 15.06.12 15:42 Latest Start 14.06 12:0
  NATQA      BS2411.2   -           1237 15.06.12 15:42 Latest Start 14.06 00:3
  NATQA      TEST4-9    -           1770 15.06.12 15:42 Latest Start 14.06 03:2
 ************************************ m o r e *********************************
Enter-PF1---PF2---PF3---PF4---PF5---PF6---PF7---PF8---PF9---PF10--PF11--PF12---
                  End                           Down        Left  Right Menu

This report lists all jobs not started for networks beginning from P230426 in owner REQUEST.

The columns contained in the report are described in Fields and Columns: Reporting.

The PF keys are explained in Special PF Keys: Reports.

Example of Accounting Information

The following is an example of the report type Accounting Information:

 31.01.19                ***** Entire Operations *****                17:40:56 
 Owner  EXAMPLE             Accounting Information           Network E01-CONTI 
 ------------------------------------------------------------------------------
 Job          Run Step JobId Start          Stop         Elapsed min CPU Tm sec
 E01-J01     1382 STEP01     30.01 05:00:00 30.01 05:00:00      0.00       0.01
 E01-J01     1382     303599       05:00:21       05:00:21      0.00       0.01
 E01-J02     1382 STEP02           05:00:00       05:00:00      0.00       0.01
 E01-J02     1382     303600       05:00:22       05:00:22      0.00       0.01
 E01-J03     1382 STEP03           05:00:00       05:00:00      0.00       0.06
 E01-J03     1382     303601       05:00:22       05:00:22      0.00       0.06
 E01-J04     1382 STEP03           05:00:00       05:00:00      0.00       0.01
 E01-J04     1382     303602       05:00:22       05:00:22      0.00       0.01
 E01-J06     1382 STEP06           05:00:00       05:01:00      1.00       0.06
 E01-J06     1382     303604       05:00:41       05:01:11      0.50       0.06
 (Network)   1382                  05:00:21       05:05:22      5.01       0.16
 E01-J05     1382 STEP05           05:00:00       05:05:00      5.00       0.01
 E01-J05     1382     303603       05:00:22       05:05:22      5.00       0.01
 -           1378            24.01 04:10:09 31.01 01:02:32   9892.39       0.00
                                                          ---------- ----------
 Averages from 24.01.19 04:10 to 31.01.19 01:02 are             0.00       0.00
 ************************************ more ************************************
                                                                               
                                                                               
Enter-PF1---PF2---PF3---PF4---PF5---PF6---PF7---PF8---PF9---PF10--PF11--PF12---

The columns contained in the report are described under Accounting Information/Schedule of Jobs reports only in Fields and Columns: Reporting.

The PF keys are explained in Special PF Keys: Reports.

Example of Network Description (short)

The following is an example of the report type Network Description (short):

  1. First report screen:

                                                                                   
     25/06/15                      Entire Operations                       14:29:55
                                 Network Documentation                             
     Owner EXAMPLE     Network B60-FLOW    Version             Job                 
     ------------------------------------------------------------------------------
     Description   : Job Flow, BS2000                                              
     Execution Node: N0082                                                         
     Symbol Table  : EXAM-ST1    Symbol Table Version :                            
                                                                                   
                                                                                   
     Schedule Times              Send Late Message to                              
     --------------              --------------------                              
     Earliest Start: 07:30:00    ASN                                             
    
      
     Latest Start  : 07:30:00                                                      
     Deadline      : 07:30:00                                                      
     ****                                                                          
                                                                                   
     ... Job Description on the following Pages                                    
                                                                                   
                                                                            
                                                                                   
    Enter-PF1---PF2---PF3---PF4---PF5---PF6---PF7---PF8---PF9---PF10--PF11--PF12---
                      End                                                   Menu
  2. The following screen appears after ENTER:

                                                
                                       
     25/06/15                      Entire Operations                       14:35:56
                                 Network Documentation                             
     Owner EXAMPLE     Network B60-FLOW    Version             Job JOB-02          
     ------------------------------------------------------------------------------
     Job: JOB-02      Type JOB Macro    Description: Dep. JOB-15, JOB-19           
     Special Type  :                                                               
     Location      : MAC                                                           
     DSN/Library:    EOR-T541                                      Member: B60-M02 
     Node          : N0082                                                         
     Symbol Table  : EXAM-ST1    Symbol Table Version :                            
                                                                                   
                                                                                   
     Schedule Parameters          Send Late Message To                             
     ------------------------     --------------------                             
     Earliest Start: 10:05:00                                                      
     Latest Start  :                                                               
     Deadline      :                                                               
     Elapsed Time  :                                                               
                                                                                   
     
                                                                                 
                                                                                   
    Enter-PF1---PF2---PF3---PF4---PF5---PF6---PF7---PF8---PF9---PF10--PF11--PF12---
                      End                                                   Menu
  3. The following screen appears after ENTER if input conditions and End-of-Job actions have been defined for the job:

                                                                                   
     25/06/15                      Entire Operations                       14:34:03
                                 Network Documentation                             
     Owner EXAMPLE     Network B60-FLOW    Version             Job JOB-02          
     ------------------------------------------------------------------------------
                                                                                   
     Input Conditions                                                              
     ----------------                                                              
       E60-J015-O RUN   must exist                                                 
       E60-J019-O RUN   must exist                                                 
       VERSION CHECK EXIT RUN   must exist                                         
                                                                                   
     End of Job Processing                                                         
     ---------------------                                                         
     If Job ended ok then do                                                       
     ... Set Condition E60-JOB2-O1 RUN                                             
     ... Set Condition E60-JOB2-O2 RUN                                             
     ... Reset Condition E60-J015-O RUN                                            
     ... Reset Condition E60-J019-O RUN                                            
     ... Reset Condition E60-JOB1-O RUN                                            
     If Job ended not ok then do                                                   
                                                                                   
     
                                                                                  
                                                                                   
    Enter-PF1---PF2---PF3---PF4---PF5---PF6---PF7---PF8---PF9---PF10--PF11--PF12---
                      End                                                   Menu

The fields contained in the report are described in Fields and Columns: Reporting.

The PF keys are explained in Special PF Keys: Reports.

Example of Network Description (detailed and with JCL)

The following is an example of the report types Network Description (detailed) and Network Description (with JCL).

The screens that appear when you press ENTER depend on the definitions made for the network and its jobs:

  • Parameters defined for the network:

     17/12/18                      Entire Operations                       17:26:24
                                 Network Documentation                             
     Owner EXAMPLE     Network B60-FLOW    Version             Job                 
     ------------------------------------------------------------------------------
     Description   : Job Flow, BS2000                                              
     Execution Node: N0031                                                         
     Symbol Table  : EXA-SYMBOL  Symbol Table Version : SV98                       
                                                                                   
                                                                                   
     Schedule Times                                                                
     --------------                                                                
     Earliest Start: 10:00:00                                                      
     Latest Start  : 08:00:00    1 calendar days later                             
     Deadline      : 08:00:00    1 calendar days later                             
                                                                                   
     Send Late Message to                                                          
     --------------------                  
                                            
     SAGTEST                                                       
                                                                                   
                                                                                   
    Enter-PF1---PF2---PF3---PF4---PF5---PF6---PF7---PF8---PF9---PF10--PF11--PF12---
                      End                                                   Menu
  • Long description of the network and a flow diagram of the jobs that belong to the network:

     17/12/18                      Entire Operations                       11:44:23
                                 Network Documentation                             
     Owner EXAMPLE     Network B60-FLOW    Version             Job                 
     ------------------------------------------------------------------------------
     Long Description                                                              
     ----------------                                                              
     Network E60-FLOW                                                              
     ----------------                                                              
     This Network is just an example of 'standard' job flow for                    
     a bigger amount of jobs.                                                      
     ?                                                                             
     The jobs are all defined with the Dynamic JCL Facility to allow               
     an easy migration to another environment.                                     
     No special end-of-job handling is defined, so that the NATURAL                
     OPERATIONS global defaults will be used.                                      
     ?                                                                             
     Flow Diagram                                                                  
     ------------                                                                  
     ?                                                                             
                                   JOB-01                                          
                             +--------+--------+   
                            V                 V   
                         JOB-012           JOB-019
                            V                 |   
                         JOB-013              |   
                            V                 |   
                         JOB-014              |   
                            V                 |   
                         JOB-015              |   
                            +--------+--------+   
                                   JOB-02         
                                     V            
                                   JOB-03         
                                     V            
                                   JOB-04         
                                     V            
                                                                                                                                                             
                                                                                   
    Enter-PF1---PF2---PF3---PF4---PF5---PF6---PF7---PF8---PF9---PF10--PF11--PF12---
                      End                                                   Menu
  • Parameters defined for each job that belongs to the network:

     17/12/18                      Entire Operations                       12:05:14
                                 Network Documentation                             
     Owner EXAMPLE     Network B60-FLOW    Version             Job JOB-01      
        
     ------------------------------------------------------------------------------
     Job           : JOB-01                                                        
     Type          : JOB Macro                                                     
     Description   : Where it all starts                                           
     Special Type  :                                                               
     Location      : MAC                                                           
     DSN/Library   : EOR-T541                                      Member: B60-M02 
     Node          : N0031                                                         
     Symbol Table  : EXAM-ST1    Symbol Table Version :                            
                                                                                   
                                                                                   
     Schedule Times                                                                
     ------------------------                                                      
     Earliest Start: 08:00:00                                                      
     Latest Start  : 17:00:00    2 calendar days later                             
     Deadline      : 20:00:00    1 calendar days later                             
     Elapsed Time  : 0.29                                                          
                                                                                   
    
     Send Late Message To                                                          
     --------------------                                                          
                                                                                  
                                                                                   
    Enter-PF1---PF2---PF3---PF4---PF5---PF6---PF7---PF8---PF9---PF10--PF11--PF12---
                      End                                                   Menu
  • For a Network Description (JCL) report, the JCL (if defined) of the job:

     22/01/19                      Entire Operations                       12:49:00
                                 Network Documentation                             
     Owner EXAMPLE     Network B60-FLOW    Version             Job JOB-01          
     ------------------------------------------------------------------------------
     @ DEFINE DATA PARAMETER USING NOPXPL-A                                        
     @ LOCAL                   /* LOCAL VARIABLES START HERE                       
     @ 1 L-DUMMY     (A01)      /* LEAVE IT NOT EMPTY                              
     @ 1 L-JOBNAME   (A08)                                                         
     @ END-DEFINE                                                                  
     @ * ------------------------                                                  
     @ MOVE P-JOB TO L-JOBNAME                                                     
     @ EXAMINE L-JOBNAME FOR '-' DELETE                                            
     /.@L-JOBNAME LOGON                                                            
     /REMARK                                                                       
     /REMARK  ENTIRE OPERATIONS EXAMPLE JOB ON @*DATD                              
     /REMARK                                                                       
     /STA L                                                                        
     /LOGOFF                                                                       
    
                                                                                   
    Enter-PF1---PF2---PF3---PF4---PF5---PF6---PF7---PF8---PF9---PF10--PF11--PF12---
                      End                                                   Menu
  • Long description of a job:

     17/12/18                      Entire Operations                       17:46:09
                                 Network Documentation                             
     Owner EXAMPLE     Network B60-FLOW    Version             Job JOB-01          
     ------------------------------------------------------------------------------
     Long Description                                                              
     ----------------                                                              
     JOB-01                                                                        
     -----------                                                                   
     This is the long description of JOB-01:                                       
     xxxxxxxxxxxxx                                                                 
     xxxxxxxxxxxxx                                                                 
     xxxxxxxxxxxxx                                                  
                   
     xxxxxxxxxxxxx                                                                 
     xxxxxxxxxxxxx                                                                 
     xxxxxxxxxxxxx                                                                 
    
                                                                                   
    Enter-PF1---PF2---PF3---PF4---PF5---PF6---PF7---PF8---PF9---PF10--PF11--PF12---
                      End                                                   Menu 
  • Input conditions and End-of-Job activities defined for a job:

     17/12/18                      Entire Operations                       17:49:13
                                 Network Documentation                             
     Owner EXAMPLE     Network B60-FLOW    Version             Job JOB-01          
     ------------------------------------------------------------------------------
     Input Conditions                                                              
     ----------------                                                              
      CONDITION1 RUN must exist                                                    
      CON-EXIT ABS Tested by User Exit <SYSEORU/BNMAC> must exist                  
     ... No Prerequisite Resources for this Job                                    
     End of Job Processing                                                         
     ---------------------                                                         
     If Job ended ok then do                                                       
     ... Set Condition E60-JOB1-O RUN                                              
     If Job not ok, or execution error then do                                     
     ... No Action defined                                                         
     If Occurrence of String 'INVALID RESPONSE-CODE' then do                       
     ... Set Condition E60-JOB1-O RUN                                              
     ... Set Condition E60-JOB2-02 RUN                                             
     ... Reset Condition E60-JO15-0 RUN                                            
     ... Reset Condition E60-JO19-0 RUN                                            
                                                                                   
                                                                                   
    Enter-PF1---PF2---PF3---PF4---PF5---PF6---PF7---PF8---PF9---PF10--PF11--PF12---
                      End                                                   Menu
    

The PF keys are explained in Special PF Keys: Reports.

Example of Network Job Flow Display

The following is an example of the report type Network Job Flow Display:

 29.06.12                      Entire Operations                       15:15:23
                Job Flow of Network E60-FLOW   Owner EXAMPLE          Page    1
                                                                               
      Job       by Condition            from/to Job     Owner       Network    
 ------------------------------------------------------------------------------
(1)   JOB-01                                                                   
        I       E60-JOB1-O                                                     
        +-----> E60-JOB1-O -----------> (11)  JOB-019                          
        +-----> E60-JOB1-O -----------> (12)  J07                              
(2)   JOB-012                                                                  
        I       E60-J012-O                                                     
(3)   JOB-013                                                                  
        I       E60-J013-O                                                     
(4)   JOB-014                                                                  
        I       E60-J014-O                                                     
(5)   JOB-015                                                                  
        I       E60-J015-O                                                     
        +<----- E60-J019-O <----------- (11)  JOB-019                          
(6)   JOB-02                                                                   
        I       E60-JOB2-O1                                                    
                                                                               
Enter-PF1---PF2---PF3---PF4---PF5---PF6---PF7---PF8---PF9---PF10--PF11--PF12---
                  End                                                   Menu

Explanations:

  • Each job is identified by a sequence number.

  • Direct successor jobs appear in vertical order.

  • If the direct sequence is interrupted, a horizontal line is printed.

  • If a successor cannot be shown indirectly, an arrow --> points from the left.

  • If a predecessor cannot be shown directly, an arrow <-- points from the right.

  • The linking conditions are shown on the right-hand side of the screen.

  • Input conditions dependent on files and dependent on job variables (BS2000) are displayed.

The PF keys are explained in Special PF Keys: Reports.

Example of Schedule of Jobs

The following is an example of the report type Schedule of Jobs:

 22.06.15                      Entire Operations                       15:51:59
                     Production Plan 22.06.15 thru 22.06.15                    
 22.06.15                                                            Page     1
 ------------------------------------------------------------------------------
 Owner      Network    Job        Description               Start    Elapsed   
 ---------- ---------- ---------- ------------------------- ----- ----------   
                                                                               
 EXAMPLE    B60-FLOW   ABC3A      Description of Job ABC3A                     
 EXAMPLE    B60-FLOW   JOB-012    Depending on Job-01                          
 EXAMPLE    B60-FLOW   JOB-013    Depending on JOB-012                         
 EXAMPLE    B60-FLOW   JOB-014    Depending on JOB-013                         
 EXAMPLE    B60-FLOW   JOB-015    Depending on JOB-014                         
 EXAMPLE    B60-FLOW   JOB-019    Depending on JOB-01                          
 EXAMPLE    B60-FLOW   JOB-02     Dep. JOB-15, JOB-19       10:05              
 EXAMPLE    B60-FLOW   JOB-03     Depending on JOB-02                          
 EXAMPLE    B60-FLOW   JOB-04     Depending on JOB-03                          
 EXAMPLE    B60-FLOW   JOB-05     Depending on JOB-04                          
 EXAMPLE    B60-FLOW   JOB-06     Where it all ends         10:30              
 EXAMPLE    B60-FLOW   MILE1-TEST Milestone Job                                
****************************** Bottom of data ******************************   
                                                                               
                                                                            
Enter-PF1---PF2---PF3---PF4---PF5---PF6---PF7---PF8---PF9---PF10--PF11--PF12---
                  End                           Down                    Menu

The columns contained in the report are described under Accounting Information/Schedule of Jobs reports only in Fields and Columns: Reporting.

The PF keys are explained in Special PF Keys: Reports.

Example of Network Start Summary

The following is an example of the report type Network Start Summary:

29.06.12                     Entire Operations                        15:47:53
               Network Start Summary for 29.06.12 thru 29.06.12      Page    1
------------------------------------------------------------------------------
                                                                              
  SN         A-1                                                              
  ---------------------                                                       
  (5972) 28.06 09:07              Awaiting Symbol Prompting                   
         28.06 09:05              Activation with Default Version             
         28.06 09:07              Symbol Table SN/A-1/5972/SN-01 activated    
         28.06 09:07              EOR4510 - Symbol Table SN/A-1/5972/SN-05 emp
         28.06 09:07              Symbol Table SN/A-1/5972/ABC1A activated    
         28.06 09:07              Symbol Prompt Request sent to SN            
         28.06 09:08              EOR2509 - Message Sending to SN via Node 146
                                                                              
  SN         A-2                                                              
  ---------------------                                                       
         28.06 09:08              Scheduled, but not extracted                
                                                                              
  SN         A-207                                                            
  ---------------------                                                       
         28.06 09:08              Scheduled, but not extracted

The columns contained in the report are described in Fields and Columns: Reporting.

Example of Network Schedule Overview

The following is an example of the report type Network Schedule Overview:

MORE                                                                           
 30.06.12                     Entire Operations                        11:41:46
 Owner   EXAMPLE                                                               
 Network E52-LOGRES   Schedule from 20.04.10 thru 20.04.10            Page    1
                                                                               
            Date     Time   Owner      Network     Run  Type                   
 ------------------------------------------------------------------------------
 Tuesday    20.04.10 08:00  EXAMPLE    E52-LOGRES       Schedule, periodic     
 ------------------------------------------------------------------------------
 Tuesday    20.04.10 00:00  EXAMPLE    E60-FLOW         Schedule, periodic     
 ------------------------------------------------------------------------------
                                                                               
 ***** End of Report *****

The columns contained in the report are described in Fields and Columns: Reporting.

Example of Activation Overview

The following is an example of the report type Activation Overview:

                                               Entire Operations: Activation Ov
-------------------------------------------------------------------------------
Date: 10.06.15                                                                 
  Owner      Network    Version    Job        Run   Time  Type       Message   
  ---------- ---------- ---------- ---------- ----- ----- ---------- ----------
                                                                               
  EXAMPLE    B60-FLOW              -           1930 00:00 Scheduled  Activation
  EXAMPLE    E01-CONTI             -            428 00:00 Scheduled  Activation
  EXAMPLE    E52-LOGRES            -           5051 00:00 Scheduled  Activation
  EXAMPLE    E60-FLOW              -           4492 00:00 Scheduled  Activation
  EXAMPLE    Z60-FLOW              -            397 00:00 Scheduled  Activation
                                                                               
                                                                               
                                                                               
                                                                               
                                                                               
                                                                               
                                                                               
                                                                               
 ******************************** Bottom of Data ******************************
                                                                               

                                                                               
Enter-PF1---PF2---PF3---PF4---PF5---PF6---PF7---PF8---PF9---PF10--PF11--PF12---
                  End                                       Left  Right Menu

Press ENTER to display the next screen if there is more data.

Choose PF11 to scroll right to see additional information.

The columns contained in the report are described in Fields and Columns: Reporting.

The PF keys are explained in Special PF Keys: Reports.

Example of Compare Symbol Tables

The following is an example of the report type Compare Symbol Tables:

MORE                                                                           
 07.04.16                      Entire Operations                       15:00:43
                             Compare Symbol Tables                   Page    4 
                                                                               
 Owner EXAMPLE          Table ADMIN           Version                          
                                                                               
 Symbol                F A Value                                               
 ------------------------------------------------------------------------------
 Different attributes:                                                         
    Value                                                                      
    Promting                                                                   
    Prompt Text                                                                
 Missing       CLASS,N1319A ,NOPALL                                            
 Differs from  CLASS,N1352B ,NOPALL                                            
 Different attributes:                                                         
    Value                                                                      
    Promting                                                                   
    Prompt Text                                                                
 Missing       CLASS,N1360A ,NOPALL                                            
 Missing       CLASS,N1378A ,NOPALL                                            
 Missing       CLASS,N1399A01 ,NOPALL 

Columns: Compare Symbol Tables

The columns contained in the report are described under Compare Networks/Symbol Tables reports only in Fields and Columns: Reporting.

Example of Compare Networks

The following are examples of the report type Compare Networks:

Example 1:

MORE                                                                           
 07.04.16                      Entire Operations                       15:39:15
                               Compare Networks                      Page    1 
                                                                               
 Owner SMR              Network A-1B            Version vhugo                  
                                                                               
 Network Attributes                                                            
 ------------------------------------------------------------------------------
 Differs from  A-1B <V02>,SMR                                                  
 Different attributes:                                                         
    Description                                                                
    Symbol Table Version 

This screen shows that the description and the symbol table version differ between Network A-1B with version vhugo of Owner SMR and Network A-1B with version V02 of owner SMR.

Example 2:

MORE                                                                           
 07.04.16                      Entire Operations                       15:44:19
                               Compare Networks                      Page    2 
                                                                               
 Owner HEB              Network AAA             Version v626                   
                                                                               
 Job       Type Loc Description                                                
 ------------------------------------------------------------------------------
 TRIGGERED1 DUM                                                                
 Differs from  TRIGGERED1,AAA <v6261>,HEB                                      
 Different attributes:                                                         
    Symbol Table                                                               
    Symbol Table Version                                                       
 Additional    NV,AAA <v6261>,HEB                                              
 Additional    RCV,AAA <v6261>,HEB                                             
 Additional    SMRTEST,AAA <v6261>,HEB                                         
 Additional    1-A,AAA <v6261>,HEB                                             
 Additional    1-B,AAA <v6261>,HEB

The job TRIGGERED1 of Network AAA with version v626 of owner HEB has a different symbol table and a different symbol table version than the job with the same name in Network AAA with version v6261 of owner HEB. The jobs NV, RCV, SMRTEST, 1-A and 1-B exist additionally in Network AAA with version v6261 of owner HEB.

Columns: Compare Networks

The columns contained in the report are described under Compare Networks/Symbol Tables reports only in Fields and Columns: Reporting.

Example of Node Overview

The following is an example of the report type Node Overview:

                                                Entire Operations: Node Overvie
-------------------------------------------------------------------------------
                                              Wait a.   VSE    Time         NPR
 Server Name       Node  Short  AM Op.Sys.    Error SSU SysId  Diff.  Valid Ver
 Node 0001            1  N0001  N                4   U    3   -11.50  yes      
 Node 0002            2  N0002  N  BS2000        5                    yes   3.5
 n4                   4  N4     B                5             10.00  yes      
 n5                   5  N5     B                5                    yes      
 Adabas DB 9          9  N0009  N                5                    yes      
 TEST                12  HUGO   N                5                    yes      
 hannes              21  21     N                5                    yes      
 BS2000 SIH2         31  N0031  N  BS2000        1   U                yes   3.5
 Broker 34           34  N0034  N  rted          5                    yes   1.2
 BS2 131             38  N0038  N  BS2000        5                    yes   3.5
 NPR 321             40  N0040  N  MVS/ESA       5                    yes   3.5
 Locl Nd DQA V134    42  N0042  N  MVS/ESA       5                    yes   3.5
 QE F-MC             53  N0053  N  MVS/ESA       5                    yes   3.3
 WOS-54              54  N0054  N  BS2000        5                    yes      
 ESM MVS             62  N0062  N  MVS/ESA       5                    yes   2.2
 Node 65             65  N0065  N  MVS/ESA       5                    yes   3.3
 ************************************ m o r e *********************************
                                                                               
 

                                                                               
Enter-PF1---PF2---PF3---PF4---PF5---PF6---PF7---PF8---PF9---PF10--PF11--PF12---
                  End                           Down        Left  Right Menu

The columns contained in the report are described under Node Overview reports only in Fields and Columns: Reporting.

The PF keys are explained in Special PF Keys: Reports.

Example of Network/Job Usage

The following is an example of the report type Network/Job Usage:

MORE                                                                           
 15.11.16                      Entire Operations                       15:25:13
                               Network/Job Usage                     Page    6 
                                                                               
            Used Job                          Using Job                        
 Owner      Network    Job         Owner      Network    Version    Job        
 ---------- ---------- ----------  ---------- ---------- ---------- -----------
 SAG        AAA        J-OHNE-VER  SAG        BBB        Current    TRIGGERED1 
                                   Usage: Recovery                             
 SAG        AAA        TRIGGERED1  SAG        EXTERN                JOB1       
                                   Usage: EOJ Activation                       
 SAG        AAA        *           SAG        AAA        v6261      TRIGGERED1 
 Version: (void)                   Usage: EOJ Activation                       
 SAG        AAA        *           SAG        AAA        v6261a     TRIGGERED1 
 Version: (void)                   Usage: EOJ Activation                       
 SAG        AAA        *           SAG        BBB        Current    TRIGGERED1 
 Version: (void)                   Usage: EOJ Activation                       
 SAG        AAA        *           SAG        SAG-MITSUB            SAG-NET1   
 Version: (void)                   Usage: Subnet

The columns contained in the report are described under Network/Job Usage reports only in Fields and Columns: Reporting.

Generating Batch Reports

All reports can be generated in batch as well as online. In batch, there are no security or asterisk/wildcard restrictions.

Batch reports are printed on Natural Printer 1, which must be allocated correctly in the job control. The Natural batch session must have the necessary LFILEs (131 and 216) correctly set and should run in delimiter input mode (IM=D).

The batch reporting programs input their parameters in several steps. This is described separately for each program.

The examples below assume that a comma (,) is used to separate parameters.

This section covers the following topics:

Activation Overview

The activation overview (see also the equivalent report Example of Activation Overview) is produced by program RE-ACO-P.

Syntax:

RE-ACO-P activation-types
owner-name,network-name
from-date,from-time,from-run,to-date,to-time,to-run

The program RE-ACO-P has three inputs:

  1. Activation types to be included in the report:

    • * All network activations.
      A Networks activated via the NOPUAC5N API routine.
      M Networks activated manually.
      O Networks activated as a result of End-of-Job checking.
      R Networks activated as part of recovery processing for an abended job.
      S Networks activated according to schedule. You can either specify an asterisk (*) or any combination of A, M, O, R and S
  2. Owner/Network

    • Owner name.

      The wildcards *, > and < are allowed. Use * for all owners.

    • Network name.

      The wildcards *, > and < are allowed. Use * for all networks.

  3. Date, time, run number ranges

    • From date (format YYYYMMDD)

    • From time (format HH:II:SS)

    • From run (maximum 999999999)

    • To date (format YYYYMMDD)

    • To time (format HH:II:SS)

    • To run (maximum 999999999)

See also Date and Time Formats.

Examples

Below are examples of Natural CMSYNIN data for producing various activation overview reports:

Example 1:

RE-ACO-P AM
EXAMPLE,*
20081101,,,20081130 /* equivalent to 20081101,00:00:00,1,20081130,23:59:59,999999999

will produce an overview of all networks under owner EXAMPLE, activated manually or by API between 1st and 30th November 2008.

Example 2:

RE-ACO-P *
*,*                                                       
20081115,14:00:00,71,20081115,22:00:00,99

will produce an overview of all activations between 14:00:00 and 22:00:00 on 15th November 2008, with run numbers between 71 and 99.

Accounting Information

Job/network accounting data (see also the equivalent report Example of Accounting Information) is produced by program RE-ACC-P.

Syntax:

RE-ACC-P
owner-name,network-name,job-name
from-date,from-time,from-run,to-date,to-time,to-run

The program RE-ACC-P has two inputs:

  1. Owner/Network/Job

    • Owner name.

      The wildcards *, > and < are allowed. Use * for all owners.

    • Network name.

      The wildcards *, > and < are allowed. Use * for all networks.

    • Job name.

      The wildcards *, > and < are allowed. Use * for all jobs.

  2. Date, time, run number ranges

    • From date (format YYYYMMDD)

    • From time (format HH:II:SS)

    • From run (maximum 999999999)

    • To date (format YYYYMMDD)

    • To time (format HH:II:SS)

    • To run (maximum 999999999)

See also Date and Time Formats.

Examples

Below are examples of Natural CMSYNIN data for producing various accounting reports:

Example 1:

RE-ACC-P
EXAMPLE,E01-CONTI
20081101,,,20081130,23:59:59,999999999

will produce accounting data for all jobs in network E01-CONTI under owner EXAMPLE, starting at 00:00:00 on 1st November 2008 and ending at 23:59:59 on 30th November 2008, for run numbers in the range 0 to 999999999.

Example 2:

RE-ACC-P
EXAMPLE,*,E10*                                                         
20081101,09:00:00,51,20081231,23:59:59,60

will produce accounting data for all jobs beginning with E10 in all networks under owner EXAMPLE, starting at 09:00:00 on 1st November 2008 ending at 23:59:59 on 31st December 2008, with run numbers between 51 and 60.

Compare Networks in Batch

This report displays the results of the comparison of one or more networks.

Syntax:

RE-CNV-P
owner1,network1,version1,
owner2,network2,version2,
show-content
  1. owner1/network1/version1:

    • Owner name.

      The wildcards *, > and < are allowed. Use * for all owners.

    • Network name.

      The wildcards *, > and < are allowed. Use * for all networks.

    • Version name.

      The wildcards *, > and < are allowed. Use * for all versions.

  2. owner2/network2/version2:

    • Owner name.

      The wildcards *, > and < are allowed. Use * for all owners.

    • Network name.

      The wildcards *, > and < are allowed. Use * for all networks.

    • Version name.

      The wildcards *, > and < are allowed. Use * for all versions.

  3. show-content:

    • A All objects.
    • D Different objects.
    • M Give message about result.

Compare Symbol Tables in Batch

This report displays the results of the comparison of one or more symbol tables.

Syntax:

RE-CNV-P
owner1,symbol-table1,symbol-table-version1,
owner2,symbol-table2,symbol-table-version2,
show-content
  1. owner1/symbol-table1/symbol-table-version1:

    • Owner name.

      The wildcards *, > and < are allowed. Use * for all owners.

    • Symbol table name.

      The wildcards *, > and < are allowed. Use * for all symbol tables.

    • Symbol table version name.

      The wildcards *, > and < are allowed. Use * for all symbol table versions.

  2. owner2/symbol-table2/symbol-table-version2:

    • Owner name.

      The wildcards *, > and < are allowed. Use * for all owners.

    • Symbol table name.

      The wildcards *, > and < are allowed. Use * for all symbol tables.

    • Symbol table version name.

      The wildcards *, > and < are allowed. Use * for all symbol table versions.

  3. show-content:

    • A All objects.
    • D Different objects.
    • M Give message about result.

Network/Job Usage in Batch

The report lists networks and related subnetworks (jobs of the type NET) as well as jobs activated by an End-of-Job action or a recovery job. See also Example of Network/Job Usage.

Syntax:

RE-XRF-P
owner1,network1,version1
owner2,network2,version2
job-1,job-2
  1. owner1/network1/version1 (used job):

    • Owner name.

      The wildcards *, > and < are allowed. Use * for all owners.

    • Network name.

      The wildcards *, > and < are allowed. Use * for all networks.

    • Version name.

      The wildcards *, > and < are allowed. Use * for all versions.

  2. owner2/network2/version2 (using job):

    • Owner name.

      The wildcards *, > and < are allowed. Use * for all owners.

    • Network name.

      The wildcards *, > and < are allowed. Use * for all networks.

    • The wildcards *, > and < are allowed. Use * for all versions.

  3. job-1 (used job) and job-2 (using job):

    • Job name.

      The wildcards *, > and < are allowed. Use * for all jobs.

Extended Log Report

This report is only available in batch and can be used to print the following:

  • log records

  • job output written to the log

  • active JCL changes written to the log

  • active JCL

The report program is NOPLP01P. It has one input to receive these parameters.

Because of the large number of parameters, you are recommended to use keyword mode for specifying them. NOPLP01P can be executed in a standard batch Natural, with LFILEs 131 and 216 set.

The output is written to the Natural system print data set (CMPRINT).

Syntax:

NOPLP01P
parameter=value%
parameter=value%
parameter=value%
Parameter Explanation
FROM-DATE-TIME Format YYYYMMDDHHIISS, starting time for log report.
THRU-DATE-TIME Format YYYYMMDDHHIISS, ending time for log report.
LANG Language in which log records will be printed, either 1 for English (the default) or 2 for German.
OWNER Owner(s) to be included in the report. The wildcards *, > and < are allowed.
NETWORK Network(s) to be included in the report. The wildcards *, > and < are allowed.
DBENV Reserved for future use. Do not specify this parameter.
RUN-FROM Starting run number.
RUN-THRU Ending run number.
JOB Job(s) to be included in the report. The wildcards *, > and < are allowed.
ACTJCL Y or N.

If Y is set, any active JCL for jobs matching the owner/network/job/run criteria is printed after the log information.

SYSOUT Y or N.

If Y is set, any logged SYSOUT for jobs matching the owner/network/run/job/date/time criteria is printed.

CHGJCL Y or N.

If Y is set, any active JCL modifications for jobs matching the owner/network/run/job/date/time criteria are printed.

EXTLOG Y or N.

Specify a default value for ACTJCL, SYSOUT and CHGJCL.

The following example assumes the Natural parameters IM=D, IA==, CF=%.

Example:

NOPLP01P

FROM-DATE-TIME=20081101000000%
THRU-DATE-TIME=20081115163000%
RUN-FROM=1%
RUN-THRU=999%
OWNER=UKSJ*%
NETWORK=TEST-2>%
JOB=L<%
LANG=2%
EXTLOG=Y

This example will print all log records as well as logged SYSOUT, logged active JCL modifications and active JCL for jobs with names less than L in networks with names greater than TEST-2 under owners beginning with UKSJ, with run numbers in the range 1 to 999 between 00:00 on 1st November 2008 and 16:30 on 15th November 2008. The log records will be printed in German.

Note:
The date/time range has no influence on printing of active JCL.

Log Reports

Log reports (see also the equivalent examples of log reports) are produced by program RE-LOG-P.

Syntax:

RE-LOG-P report-type,count-jobs
owner-name,network-name,job-name
from-date,from-time,from-run,to-date,to-time,to-run
  1. Report Type:

    • A All events in log.
      B Abended jobs.
      T Terminated jobs.
      X Jobs not started due to start time, input conditions, submission permanent errors and extraction + activation * permanent errors.
      Y Jobs not started due to submission permanent errors and extraction + activation permanent errors.
      N Networks not activated due to extraction or activation errors.

      For all report types listed above, the data included in the log is not older than the retention period set for Standard Log in the Entire Operations Default Setting (1) (see the Administration documentation). Exception: Reports of the type A (all events in log) include log data that is not older than the retention period set for Long-term Log set in the Default Setting (1).

    • Count Jobs

      Y Produce a count of jobs.
      Warning:
      This requires a rereading of the whole log and therefore will greatly increase the elapsed and CPU times and the number of Adabas calls for the batch job
      N Do not produce a count of jobs.
  2. Owner / Network / Network Version / Job

    • Owner name.

      The wildcards *, > and < are allowed. Use * for all owners.

    • Network name.

      The wildcards *, > and < are allowed. Use * for all networks.

    • Job name.

      The wildcards *, > and < are allowed. Use * for all jobs.

  3. Date, time, run number ranges

    • From date (format YYYYMMDD)

    • From time (format HH:II:SS)

    • From run (maximum 999999999)

    • To date (format YYYYMMDD)

    • To time (format HH:II:SS)

    • To run (maximum 999999999)

See also Date and Time Formats.

Examples

Below are examples of Natural CMSYNIN data for producing various log reports:

Example 1:

RE-LOG-P T,Y
EX*,E10>
20081101,,,20081130,23:59:59,999999999

will produce a report of all terminated jobs in networks with names greater than E10 under owners beginning with EX, starting at 00:00:00 on 1st November 2008 and ending at 23:59:59 on 30th November 2008, for run numbers in the range 0 to 999999999. A count of jobs will be produced.

Example 2:

RE-LOG-P A,N
*,*,
20081114,09:00:00,51,20081114,17:30:00,60

will produce a report of all events between 09:00:00 and 17:30:00 on 14th November 2008 for all owners, networks and jobs with run numbers between 51 and 60. A count of jobs will not be produced.

Network Information

Network reports (see also the equivalent reports Example of Network Description (short) and Example of Network Description (detailed and with JCL)) are produced by program RE-NET-P.

Syntax:

RE-NET-P report-type
owner-name,network-name

The program RE-NET-P has two inputs:

  1. Report type

    S Short network description.
    D Detailed network description.
    J Detailed network description with JCL.
  2. Owner/Network

    • Owner name.

      The wildcards *, > and < are allowed. Use * for all owners.

    • Network name.

      The wildcards *, > and < are allowed. Use * for all networks.

Examples

Below are examples of Natural CMSYNIN data for producing various network reports:

Example 1:

RE-NET-P S
*,*

will produce a summary report for all networks.

Example 2:

RE-NET-P J                                                      
SYS*,W>

will produce a detailed report, including JCL for all networks with names greater than W in owners beginning with SYS.

Network Job Flow

Network job flow (see also the equivalent report Example of Network Job Flow Display) is produced by program RE-FLW-P.

Syntax:

RE-FLW-P
owner-name,network-name

The program RE-FLW-P has one input:

  • Owner/Network

    • Owner name.

      The wildcards *, > and < are allowed. Use * for all owners.

    • Network name.

      The wildcards *, > and < are allowed. Use * for all networks.

Examples

Below are examples of Natural CMSYNIN data for producing various network job flow reports:

Example 1:

RE-FLW-P
EXAMPLE,E60-FLOW

will produce a report for E60-FLOW in owner EXAMPLE.

Example 2:

RE-FLW-P                                         
SYS*,W>

will produce a report for all networks with names greater than W in owners beginning with SYS.

Network Start Summary

The network start summary (see also the equivalent report Example of Network Start Summary) is produced by program RE-ACT-P.

It has two inputs:

RE-ACT-P
owner-name,network-name
from-date,to-date
  1. Owner/Network

    • Owner name.

      The wildcards *, > and < are allowed. Use * for all owners.

    • The wildcards *, > and < are allowed. Use * for all networks.

  2. Date range

    • From date (format YYYYMMDD)

    • To date (format YYYYMMDD)

See also Date and Time Formats.

Examples

Below are examples of Natural CMSYNIN data for producing various network start summary reports:

Example 1:

RE-ACT-P
EXAMPLE,*
20081101,20081130

will produce a summary of all networks under owner EXAMPLE, between 1st and 30th November 2008.

Example 2:

RE-ACT-P
E*,M<                                                
20081101,20081231

will produce a summary of all networks with names less than M under owners beginning with E between 1st November and 31st December 2008.

Network Schedule Overview

The network schedule overview (see also the equivalent report Example of Network Schedule Overview) is produced by program RE-NSC-P.

Syntax:

RE-NSC-P report-type
owner-name,network-name
from-date,to-date

The program RE-NSC-P has three inputs:

  1. Report Type

    A Extractions and schedule, sorted by network, time.
    B Extractions only, sorted by network, time.
    C Extractions only, sorted by time.
  2. Owner/Network

    • Owner name.

      The wildcards *, > and < are allowed. Use * for all owners.

    • The wildcards *, > and < are allowed. Use * for all networks.

  3. Date range

    • From date (format YYYYMMDD).

    • To date (format YYYYMMDD).

See also Date and Time Formats.

Examples

Below are examples of Natural CMSYNIN data for producing various schedule overview reports:

Example 1:

RE-NSC-P A
EXAMPLE,*
20081101,20081130

will produce an overview of all networks under owner EXAMPLE, scheduled to run between 1st and 30th November 2008.

Example 2:

RE-NSC-P B
E*,M<                                                
20081101,20081231

will produce an overview of schedule extractions (activations) of all networks with names less than M under owners beginning with E between 1st November and 31st December 2008.

Node Overview Report

Node Overview Reports are generated with the program RE-NOD-P.

Syntax:

RE-NOD-P from-node to-node

Example:

RE-NOD-P 1 299

Report of Used JCL

The report of used JCL is produced by the program RJCLOC-P.

Syntax:

RJCLOC-P owner-name,network-name

The program RJCLOC-P has two inputs:

  1. Owner Wildcard may be used.

  2. Network Wildcard may be used.

Below are examples of Natural CMSYNIN data for producing JCL usage reports:

Example 1:

RJCLOC-P EXAMPLE NET-01

List used JCL of network EXAMPLE / NET-01.

Example 2:

RJCLOC-P TEST* *

List used JCL of all networks of owners with have TEST as begin of their names.

Schedule of Jobs

Job schedules (see also the equivalent report Example of Schedule of Jobs) are produced by program RE-JSC-P.

Syntax:

RE-JSC-P
owner-name,network-name
from-date,to-date

The program RE-JSC-P has two inputs:

  1. Owner/Network

    • Owner name.

      The wildcards *, > and < are allowed. Use * for all owners.

    • Network name.

      The wildcards *, > and < are allowed. Use * for all networks.

  2. Date range

    • From date (format YYYYMMDD)

    • To date (format YYYYMMDD)

See also Date and Time Formats.

Examples

Below are examples of Natural CMSYNIN data for producing various job schedule reports:

Example 1:

RE-JSC-P
EXAMPLE,E01-CONTI
20081101,20081130

will produce a schedule of jobs in network E01-CONTI under owner EXAMPLE, between 1st and 30th November 2008.

Example 2:

RE-JSC-P
*,*                                                       
20081101,20081231

will produce a schedule of all jobs, between 1st and 30th November 2008.