User Maintenance

This section describes how to create and maintain user security profiles. It covers the following topics:

• Before You Begin

• Components of a User Profile

• Creating and Maintaining User Profiles

Before You Begin

Before you begin to define users to Natural Security, it is recommended that you take a few preparatory steps:

• Make a list of all people in your organization who are using Natural.

• Divide them into groups according to the work they do and in view of the Natural libraries they are to use. The division of your company into departments may be a guideline. People using the same libraries should be in the same groups. (People may be in more than one group.)

It is recommended that groups be used as much as possible, as this will not only reduce Natural Security maintenance considerably, but also provides for a more consistent protection setup.

The definition of users to Natural Security and the assignment of users to groups is best done in the following order:

1. Create a group security profile; that is, define a user of type "Group".

2. Create individual user security profiles; that is, define users (typically of type "Member").

3. Assign Members to the Group; that is, modify the group security profile.

Components of a User Profile

This section covers the following topics:

• Overview of Components

• Components on Main User-Profile Screen

• Additional Options

Overview of Components

Components on Main User-Profile Screen

The following type of screen is the "basic" user profile screen, which is displayed when you invoke one of the functions Add, Copy, Modify, Display for a user security profile:

 15:27:08                    *** NATURAL SECURITY ***               2020-08-08
                                 - Modify User -                               
                                                                      
                                              Modified ..          by 
 User ID ...... AD                                                 
 User Name .... ARTHUR DENT_____________________                   
 User Type .... A (A=Administrator, P=Person, M=Member)            
                                                                   
 Privil. Groups           Libraries                 Password       
 --------------      -------------------      ----------------------
 DOC_____            Default .. SYSSEC__      New Password ________
 ________            Last .....               Change after 666 days
 ________            Private Library ... Y    Password History .. N
 ________                                     Individual Lock ... F
 ________                                                         
                            ETID                  Characteristics
 No. groups   3      -------------------      ---------------------------------
                     Default ..  AR1R  G      Logon recorded .... N
                     Last .....               Batch User ID ..... ________ 
                                              Language .......... _0
                     Batch ....               Time Differential   + __ h __ min
                                              Time Zone
                                              _________________________________
 
                                                                                
 Additional Options ... N                                                      
                                                                    
 Enter-PF1---PF2---PF3---PF4---PF5---PF6---PF7---PF8---PF9---PF10--PF11--PF12---
       Help  PrevM Exit  AddOp PrLib Flip                                Canc

The individual items you may define as part of a user security profile are explained below.

The items of a user security profile may vary depending on the user type. For each item explained below, the user types concerned are indicated in brackets. If no user types are indicated, the item applies to users of every type.

Additional Options

If you mark the field Additional Options on the basic security profile screen with "Y", a window will be displayed from which you can select the following options:

• Maintenance Information

• Security Notes

• Owners

• Mailboxes

• Activation Dates

• Functional Security

• Groups/Members

• Group Editor

• Private Library

• Session Options

• Development Mode

The options for which something has already been specified or defined are marked with a plus sign (+).

Some options are only available for certain user types.

You can select one or more items from the window by marking them with any character. For each item selected, an additional window/screen will be displayed (in the order of the items in the selection window).

The Private Library screen can also be invoked directly by pressing PF5 on the basic security profile screen.

The individual options are explained below.

Session Options

Creating and Maintaining User Profiles

This section describes the functions used to create and maintain user profiles. It covers the following topics:

• Invoking User Maintenance

• Adding a New User

• Adding Multiple New Users

• Selecting Existing Users for Processing

• Copying a User

• Modifying a User

• Renaming a User

• Deleting a User

• Displaying a User

• Editing Group Members

• Copying a User's Links

Invoking User Maintenance

To invoke user maintenance:

1. On the Main Menu, select Maintenance.

   A window will be displayed.

2. In the window, mark the object type User with a character or with the cursor.

   The User Maintenance selection list will be displayed.

3. From this selection list, you invoke all user maintenance functions as described below.

Adding a New User

The Add User function is used to define new users to Natural Security, that is, create user security profiles.

When you add a new user, you have to specify:

• a user ID,

• a user type,

• the ID of a default profile (optional).

User ID

The user ID is used by Natural Security to identify the user. It may be 1 to 8 characters long. The ID must be unique among all user IDs and library IDs defined to Natural Security. For user IDs, the same naming conventions apply as for library IDs (see the section Library Maintenance).

• If the user is an individual, usually an ID is chosen which is related to the user's name.

• If the user is a terminal, the ID must be identical to the terminal ID by which the terminal is defined to the computer (ask your system programmer).

• If the user is a group, choose whatever ID you like.

User Type

When you add a user, you specify the code for one of the following user types:

If the user to be defined is a group, the user type must be "G". If the user to be defined is a terminal, the user type must be "T". If the user to be defined is an individual, the user type should be "M" (except individuals who are Natural Security administrators and have to be user type "A").

The access rights of different types of users to libraries are summarized in the following diagram:

If you have doubts about the correct user type specification, please refer to Users in the section The Structure And Terminology Of Natural Security.

Once an individual has been defined, you can later change his/her user type classification (as explained under Upgrading and Downgrading Users below.

Default Profile

When you add a new user, you can either type in every item within the user security profile by hand; or you can use a pre-defined user default profile as a template for the security profile you are creating.

Before you use default profiles, you should be familiar with the "normal" way of defining users (that is, without default profile).

Default profiles are created and maintained in the Administrator Services subsystem.

The user type of the default profile you specify must be the same as that of the user security profile you are creating.

If you specify the ID of a default profile in the Add User window, the items from the default profile will be copied into the user profile - except the user ID, user name and the owners.

On the Add User screen, you can then overwrite the items copied into the user profile and specify further items.

For further information, see User Default Profiles in the section Administrator Services.

How to Add a New User

In the command line of the User Maintenance selection list, you enter the command ADD.

A window will be displayed. In this window, you enter the following:

• a user ID,

• a user type,

• the ID of a default profile (optional).

The Add User screen for the specified user type will be displayed. On this screen, you define a security profile for the user.

The Add User screen and the subsequent screens/windows that are part of a user security profile as well as the individual items you may define are described under Components of a User Profile.

When you add a new user, the owners specified in your own user security profile will automatically be copied into the user security profile you are creating.

Adding Multiple New Users

Before you use the Multiple Add User function you should be familiar with the "normal" way of defining users (as described under Adding a New User above).

The Multiple Add User function allows you to define large numbers of users to Natural Security in a fast and easy way. You can use this function to define numerous users who are to have identical security profiles.

In the command line of the User Maintenance selection list, you enter the command ADDM.

A window will be displayed. In this window, enter a user ID and a user type specification (and, optionally, the ID of a default profile).

The Multiple Add User screen for the specified user type will be displayed. On this screen you may define a security profile for the user.

The Multiple Add User screen and the subsequent screens/windows that are part of a user security profile as well as the individual items you may define are described under Components of a User Profile.

When you add a new user, the owners specified in your own user security profile will automatically be copied into the user security profile you are creating.

To create multiple user security profiles

1. On the first screen (and any additional screens/windows), you define a security profile for one user.

2. Once you have finished typing in the items to be defined and are back on the Multiple Add User screen without any additional screens/windows being active, press ENTER. The first user is now defined.

3. Then press PF5 - the same security profile will be displayed again omitting the user ID and user name entries. Type in a user ID and the name of the next user and press ENTER. The second user is now defined.

4. Then press PF5 - the same security profile will be displayed again omitting the user ID and user name entries. In this manner, you may continue to define more users all with identical security profiles.

5. To leave the Multiple Add User function, press PF3.

Selecting Existing Users for Processing

When you invoke User Maintenance, a list of all users that have been defined to Natural Security will be displayed.

If you do not want a list of all existing users but would like only certain users to be listed, use the Start Value and Type/Status options as described in the section Finding Your Way In Natural Security.

On the Main Menu, select Maintenance. A window will be displayed.

In the window, mark the object type User with a character or with the cursor (and, if desired, enter a start value and/or user type).

The User Maintenance selection list will be displayed:

 11:11:11                   *** NATURAL SECURITY ***                 2020-12-31
                              - User Maintenance -                             
                                                                                 
  Co User ID  User Name                        Type Message                      
  __ ________ ________________________________ ____ _____________________        
  __ AAZ      ABDUL ALHAZRED                   A                                 
  __ AD       ARTHUR DENT                      A                                 
  __ CDW      CHARLES DEXTER WARD              A                                 
  __ CZ       CODY ZAMORA                      P                                 
  __ DI       DAVID INNES                      A                                 
  __ EW       ESMERALDA WEATHERWAX             M                                 
  __ HC       HAGBARD CELINE                   A                                 
  __ HW       HENRY WILT                       A                                 
  __ IW       IRENE WILDE                      M                                 
  __ LL       LOCKE LAMORA                     M                                 
  __ PE       PALMER ELDRITCH                  M                                 
  __ PR       PRECIOUS RAMOTSWE                M                                 
  __ SV       SAM VIMES                        M                                 
  __ TN       THURSDAY NEXT                    P                                 
  __ VV       VINCENT VEGA                     M                                 
                                                                                 
  Command ===>                                                                   
  Enter-PF1---PF2---PF3---PF4---PF5---PF6---PF7---PF8---PF9---PF10--PF11--PF12---
        Help        Exit              Flip  -     +                       Canc  

For each user, the user ID, user name and user type are displayed.

The list can be scrolled as described in the section Finding Your Way In Natural Security.

The following user maintenance functions are available (possible code abbreviations are underlined):

To invoke a specific function for a user, mark the user with the appropriate function code in column Co.

You can select various users for various functions at the same time; that is, you can mark several users on the screen with a function code. For each user marked, the appropriate processing screen will be displayed. You can then perform for one user after another the selected functions.

Copying a User

The Copy User function is used to define a new user to Natural Security by creating a security profile which is identical to an already existing user security profile.

• What is Copied?
• How to Copy
• Copying Without Links
• Copying With Links

What is Copied?

All components of the existing security profile will be copied into the new security profile - except:

• the user name (see How to Copy below),

• the password,

• the ETID (which identifies End of Transaction data),

• the owners (these will be copied from your own user security profile into the new user security profile you are creating).

Whether the groups entered in the Privileged Groups column and any links to libraries are copied depends on whether you copy with or without links (see below).

How to Copy

1. On the User Maintenance selection list, mark the user whose security profile you wish to duplicate with function code CO.

2. A window will be displayed in which you specify the following:

   Field	Explanation
   To user	Enter the ID of the "new" user.
   User name	This field shows the name of the existing user. Overwrite it with the name of the "new" user.
   With links	With this option, you can, in addition to the user profile, also copy its links, utility profiles and groups. N = See Copying Without Links below. Y = See Copying With Links below.

3. The Copy User screen will be displayed showing the new security profile.

   Its components which you may define are described under Components of a User Profile.

Copying Without Links

If you select With links = N:

• The groups entered in the Privileged Groups column of the existing user will not be copied into the new user security profile.

• Any links defined for the existing user will not apply to the new user.

• Any user-specific and user-library-specific utility profiles for the existing user will not apply to the new user.

Copying With Links

If you select With links = Y:

• Any links that existed for the existing user are copied for the new user, and you have the option to cancel the links you wish not to apply for the new user.

• The new user will be added to all groups in which the existing user is contained (and all access right of the groups to libraries then also apply for the new user), and you have the option to delete the new user from any of these groups;

• Any user-specific and user-library specific utility profiles that existed for the existing user are copied for the new user.

The procedure is as follows:

1. Once you have made any changes to the copied security profile and then leave the Copy User screen by pressing PF3, a list of libraries is displayed: the list contains all libraries to which the existing user is linked directly.

2. On the list, you may mark individual libraries with CL to cancel any links you wish not to apply for the new user. To all libraries you do not mark, the new user will automatically be linked in the same manner - normal or special link - as the existing user.

3. Once you have established all direct links and then leave the list of libraries by pressing PF3, a list of groups is displayed: it contains all groups in which the existing user is contained.

4. On the list you may mark with CL the groups to which you wish the new user not to be added; the new user will automatically be added to all groups you do not mark. If any of the groups to which the new user is added is entered as Privileged Groups in the security profile of the existing user, they will automatically also be entered as Privileged Groups in the new user security profile.

Modifying a User

The Modify User function is used to change an existing user security profile.

To do so:

1. On the User Maintenance selection list, mark the user whose security profile you wish to change with function code MO.

2. The Modify User screen will be displayed, showing the security profile.

   Its components which may define or modify are described under Components of a User Profile.

Upgrading and Downgrading Users

If need be, you may change the user type classification of an individual.

To change the user type, first type in the new user type and press ENTER to obtain the appropriate Modify User screen before you further modify the security profile, because the Modify User screens for the different user types are not identical to one another.

Upgrading a User

You may "promote" a MEMBER to become a PERSON or an ADMINISTRATOR; and you may "promote" a PERSON to become an ADMINISTRATOR.

Downgrading a User

You may downgrade an ADMINISTRATOR to become a PERSON or a MEMBER; and you may downgrade a PERSON to become a MEMBER.

• Before you can downgrade a user from ADMINISTRATOR to PERSON, you have to remove him/her as owner from every security profile in which he/she is specified as owner. As long as an ADMINISTRATOR is still owner of any security profile, he/she cannot be downgraded.

• Before you can downgrade a user from ADMINISTRATOR to MEMBER, you have to perform the following:

  • Remove him/her as owner from every security profile in which he/she is specified as owner. As long as an ADMINISTRATOR is still owner of any security profile, he/she cannot be downgraded.

  • Cancel all direct links from the user to libraries/external objects. As long as the user is linked to any library or external object, he/she cannot become a MEMBER.

  • Delete the ADMINISTRATOR's private library (if defined). As long as the user has a private library, he/she cannot become a MEMBER.

• Before you can downgrade a user from PERSON to MEMBER, you have to cancel all direct links from the user to libraries/external objects. As long as the user is linked to any library or external object, he/she cannot become a MEMBER. In addition, you have to delete the PERSON's private library (if defined). As long as the user has a private library, he/she cannot become a MEMBER.

User Locked?

When the Lock User Option (see Administrator Services) is active, it may occur that the user security profile has been locked.

If the security profile is locked, this will be indicated on the Modify User screen by the message:

This user is currently locked due to logon/countersign error!

If you enter a "Y" in the Unlock? (Y/N) field, a window will be displayed which provides detailed information on how and when the locking occurred. In that window you may also unlock the security profile.

Renaming a User

The Rename User function allows you to change the user ID of an existing user security profile.

To do so:

1. On the User Maintenance selection list, mark the user whose ID you wish to change with function code RE.

2. A window will be displayed in which you enter a new ID for the user (and, optionally, change the user's name).

The following users cannot be renamed:

• an administrator who is an owner of one or more security profiles,

• a user who is specified as DDM modifier in one or more DDM/file security profiles.

Deleting a User

The Delete User function is used to delete an existing user security profile.

To do so:

1. On the User Maintenance selection list, you mark the user you wish to delete with function code DE.

2. The Delete User window will be displayed.

   • If you decide against deleting the user security profile, leave the window by pressing ENTER without having typed in anything.

   • To delete the user security profile, enter the user's ID in the window to confirm the deletion.

Depending on the setting of the general option Allow Deletion of Users Who Are Owners/DDM Modifiers (see Administrator Services), it may not be possible to delete a user security profile if the user is specified as owner in any security profile or as DDM modifier in any DDM/file security profile.

If you mark more than one user with DE, a window will be displayed in which you are asked whether you wish to confirm the deletion of each user security profile by entering the user's ID, or whether all users selected for deletion are to be deleted without this individual confirmation. Be careful not to delete a user accidentally.

Displaying a User

The Display User function is used to display an existing user security profile.

To do so:

1. On the User Maintenance selection list, mark the user whose security profile you wish to view with function code DI.

2. The Display User screen will be displayed, showing the security profile.

   Its components are explained under Components of a User Profile.

User Locked?

When the Lock User Option (described in the section Administrator Services) is active, it may occur that the user security profile has been locked.

If the security profile is locked, this will be indicated on the Display User screen by the message:

This user is currently locked due to logon/countersign error!

If you enter a "Y" in the Lock Info (Y/N) field, a window will be displayed which provides detailed information on how and when the locking occurred.

Editing Group Members

The Edit Group Members function is used to assign users to or delete users from a group.

As long as the number of users assigned to a group does not exceed 5, the group members may be maintained in the Members column of the group's security profile by using the Modify User function. For larger groups, membership maintenance has to be done with the Edit Group Members function.

Invoking the Edit Group Members Function

You can invoke the Edit Group Members function in two ways:

• On the User Maintenance selection list, mark the group you wish to edit with function code EG.

• In a group's security profile, mark the option Group Editor in the Additional Options window with any character.

The Edit Group Members screen will be displayed:

>                      > +   Gr ELGRUPO                  Size 7    Line 1
  ALL  User ID             User Name              Type        Status
       -------- --------------------------------- ---- --------------------
       AD       ARTHUR DENT                       A                             
       AT       TIFFANY ACHING                    M                             
       MT       MERCY THOMPSON                    M                             
       RM       RACHEL MORGAN                     P                             
       TAK      THE ANALOG KID                    M
       TW2112   WEINRIB'S TERMINAL                T                            
       UBG      UNBEARABLE BOY GROUP              G                           

The Edit Group Members screen is a modified Natural program editor. When you invoke it, the users already contained in the given group are read into the source area. The list of group members is in alphabetical order of user IDs. For each user, the user ID, user name and user type are displayed.

Editing the List of Group Members

To edit the list, you can use the Natural program editor scrolling commands, line commands and editor commands (as described in the Natural Editors documentation).

To add a user to the group, add the user ID to the list. To delete a user from the group, delete the user ID from the list.

Remember that users have to be defined to Natural Security before they can be added to a group.

It does not matter in which order you specify new user IDs: when you catalog the list of group members (see below), they will automatically be sorted alphabetically.

To add all users contained in one group to the group you are editing, enter the command INCLUDE group-ID in the command line of the Edit Group Members screen. All users contained in the group whose ID you specify with the INCLUDE command will then be added to the list. They will be included before the user who is displayed in the top line of the screen.

Alternatively, you can have a group within a group; that is, you add the group ID to the list of group members you are editing.

Saving Your Modifications

Modifications are only processed in the source area until you catalog them. To do so, you enter the command CATALOG in the command line, or press PF3. This command first invokes a procedure which checks for duplicate IDs. If all IDs are unique, the edited list of members will be entered in the group's security profile.

To invoke the checking procedure only, you use the command CHECK.

When you catalog the list of group members, the user exit NSCUSEX2 is invoked. It displays a list of the group's members, indicating which members have been added to the group and which have been removed from it.

To leave the Edit Group Members screen, enter a period (.) in the command line.

Copying a User's Links

The Copy User's Links function is used to copy links from one existing user profile to another one of the same user type.

You can individually select the links to be copied. In addition to links, you can copy group memberships (including Privileged Groups specifications) and functional security definitions.

To copy:

1. On the User Maintenance selection list, mark the user whose links you wish to copy with function code CP.

2. A window will be displayed in which you enter the ID of the user to which you wish to copy links.

   In addition, you can restrict the selection of link types in the window:

   • Library links

   • Groups/Members

   • Utility links

   • Functional security

   • File links (if the user has a private library)

   • Environment links

   • External object links

   By default, all the above are selected. To deselect one type, you remove the "X".

3. A list of all the first user's existing links (of the selected types) will be displayed.

   The listed links are not automatically preselected for copying. In the "Co" column of the list, you have to mark with function code CO each link you wish to be copied from the one user to the other.

   You can mark one or more links per screen. For each link marked, a message indicating if it has been copied will be displayed. If a link cannot be copied, this will also be indicated. For example, if the user already has a link to a specific object, this cannot be replaced by a link copied from the other user.