This section contains the abend codes, SCP environment initialization errors, SCP environment recovery errors, SCP processing errors and the session errors issued by the Natural CICS Interface. For information on this interface, see Natural under CICS in the TP Monitor Interfaces documentation.
This section contains the abend codes, SCP environment initialization errors, SCP environment recovery errors, SCP processing errors and the Natural CICS interface session errors issued by the Natural CICS Interface.
Unlike Natural system messages, the explanatory long texts to these messages and codes are only available in this document, not online.
This section covers the following topics:
The abend codes and corresponding error messages of the Natural CICS interface are listed groups in the following order:
NInn | SCP environment initialization errors |
NRnn | SCP environment recovery errors |
NSnn | SCP processing errors |
NTnn | Natural under CICS session errors |
The Natural System Control Program (SCP) is part of the Natural CICS Interface. A dump is taken for most of the SCP failures.
Note:
All messages included in this document actually appear in mixed
case format.
NIAB
|
NIAD
|
NI01
|
NI02
|
NI03
|
NI04
|
NI05
NIAB - INIT, ABEND xxxx DURING INITIALIZATION | |
Explanation |
CICS transaction abend xxxx occurred during system environment initialization. |
Action |
Check the abend code and correct the error or print the dump and contact Software AG Support. |
|
|
|
|
|
|
|
NRAB
|
NR01
|
NR02
|
NR03
|
NR04
|
NR05
|
|
|
|
|
|
NSAB
|
NSAD
|
NS01
|
NS02
|
NS03
|
NS04
|
NS05
|
NS06
|
NS07
|
NS08
|
NS09
|
NS10
|
NS11
|
NS12
|
NS13
|
NS14
|
NS15
|
NS16
|
NS17
|
NS18
|
NS19
|
NS21
|
NS22
|
NS23
|
NS30
|
NS31
|
NS32
|
NS33
|
NS34
|
NS39
|
NS40
|
NS41
|
NS42
|
NS43
|
NS44
|
NS45
|
NS46
|
NS49
|
NS50
|
NS51
|
NS52
|
NS53
|
NS54
|
NS55
|
NS59
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
NTAD
|
NT01
|NT02
|
NT03
|
NT04
|
NT05
|
NT06
|
NT07
|
NT08
|
NT09
|
NT10
|
NT11
|
NT12
|
NT13
|
NT89
|
NT90
|
NT91
|
NT92
|
NT93
|
NT94
|
NT95
|
NT96
|
NT97
|
NT98
|
NT99
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Natural under CICS informational messages comprise NCI environment startup messages and other messages, such as termination messages and messages issued via WTL, etc.
NCI0000 | Unknown message NCInnnn
|
NCI0001 | NciPfx Natural/CICS
Interface Version nnn Lvl
nnn |
NCI0002 | NciPfx Installing
Natural system
|
NCI0003 | NciPfx Natural system
successfully started
|
NCI0004 | NciPfx Natural system
reset
|
NCI0005 | NciPfx Un-installing
old Natural system
|
NCI0007 | NciPfx NCI system
directory dir-name at
address
|
NCI0008 | NciPfx NCI system
directory extension at address
|
NCI0009 | NciPfx NCI directory
extension released at address |
NCI0010 | grp-name , Installing
thread group, thread size =
nnnnn |
NCI0011 | grp-name , Terminating
thread group, thread size =
nnnnn |
NCI0012 | grp-name , Thread group
(type ) available: threads =
nnn |
NCI0013 | grp-name , Thread group
(type ) dead due to no threads
available
|
NCI0015 | grp-name , Thread(s)
released at address
|
NCI0016 | thd-name , Thread
allocated at address |
NCI0017 | thd-name , Thread
allocation failure: failure |
NCI0019 | NciPfx
Max thread size for Roll Server:
nnnnn |
NCI0020 | NciPfx Max thread size
for VSAM roll files: nnnnn
|
NCI0021 | NciPfx
Max thread size for CICS Temp Storage:
nnnnn |
NCI0022 | file-name , VSAM roll
file not available
|
NCI0023 | file-name , VSAM roll
file access failure: failure |
NCI0024 | file-name , VSAM roll
file unusable: inconsistent control record
|
NCI0025 | file-name , VSAM roll
file unusable: too few records in file
|
NCI0026 | file-name , no. records /
record size / CI size: nnnnnnnn / nnnnn /
nnnnn |
NCI0027 | file-name , roll
attributes: slot size / no. slots: nnnnn /
nnnnn |
NCI0028 | NciPfx
CICS Main Temp Storage available: slot size =
nnnnn |
NCI0029 | NciPfx
CICS Aux Temp Storage available: slot size =
nnnnn |
NCI0030 | tran-id ,
NCI message switch transaction available/not
available |
NCI0031 | dest-id ,
NCI session log destination available/not
available |
NCI0032 | dest-id ,
NCI message log destination available/not
available |
NCI0033 | dest-id ,
NCI common dyn parms destination available/not
available |
NCI0034 | dest-id ,
NCI MVS RJE destination available/not
available |
NCI0035 | tran-id ,
NCI node error transaction available/not
available |
NCI0040 | NciPfx Loading NCI dyn
parms from destination dest-id
|
NCI0041 | NciPfx Deleting NCI
common dyn parms
|
NCI0042 | NciPfx NCI common dyn
parms deleted at address |
NCI0043 | NciPfx NCI common dyn
parms loaded at address |
NCI0044 | NciPfx NCI dyn parms
load failure: failure
|
NCI0050 | NciPfx Installing
type pool, size =
nnnnnnn
pool-name |
NCI0051 | NciPfx Creating
type pool cache, size =
nnnnnnn |
NCI0052 | NciPfx Deleting
type pool cache, size =
nnnnnnn |
NCI0053 | NciPfx
type pool allocated at
address size =
nnnnnnn |
NCI0054 | NciPfx
type pool released at
address size =
nnnnnnn |
NCI0055 | NciPfx
type pool GETMAIN failure:
failure |
NCI0056 | NciPfx
type pool cache created ALET =
xxxxxxxx |
NCI0056 | NciPfx
type pool cache created
64-bit address |
NCI0057 | NciPfx
type pool cache deleted ALET =
xxxxxxxx |
NCI0057 | NciPfx
type pool cache deleted
64-bit address |
NCI0058 | NciPfx
type pool cache creation failure:
failure
|
NCI0059 | NciPfx
type pool cache deletion failure:
failure |
NCI0060 | NciPfx Swap pool
successfully initialized pool-name
|
NCI0061 | NciPfx
Swap pool usable size = nnnnnn
pool-name |
NCI0062 | NciPfx
Swap pool cache not created: no space for roll buffer
|
NCI0069 | NciPfx
Local Editor buffer pool using file
file-name |
NCI0070 | SubSid ,
Sub-system for server(s) , directory at
address |
NCI0071 | SubSid ,
Sub-system location failure:
failure |
NCI0080 | NciPfx
NCIPARM generation parameters modified
|
NCI0081 | NciPfx
NCIPARM gen parms resource status refreshed
|
NCI0082 | NciPfx
Buffer pool de-/re-allocated
|
NCI0090 | NciPfx
Sessions force-terminated:
nnnnn |
NCI0100 | Message produced by CMWTL |
NCI0110 | Message produced by CMTRACE |
NCI0200 | Natural termination message |
NCI0210 | z/VSE submit debug message |
NCI0250 | Storage violation in program
PPPPPPPP called by
Natpgm/NatLib/StatementNo |
NCI0300 | server-id : Master
session installed
|
NCI0301 | server-id : Master
session installation failed
|
NCI0302 | server-id : Server
environment terminated
|
NCI0303 | NciPfx server-id :
Master session deleted
|
NCI0304 | NciPfx server-id :
Master session deletion failed
|
NCI0305 | NciPfx server-id : No
master session to delete
|
NCI0310 | Server trace message number |
The following messages may be output during the initialization of VSAM roll files for Natural:
A VSAM macro request failed.
mmmmmmmm
is the failing macro;
xxxxx
is the offset of the macro
request within NCISCPRI
;
rrrr
,
eeeee
and
fffff
are the VSAM macro request
return, feedback and function code.
For an (unblocked) VSAM file, the maximum possible record size is the control interval size minus 7. Any smaller record size means wasted disk space and can result in more roll I/Os.
The VSAM file to be initialized is not an RRDS
, but a
KSDS
or ESDS
file. Only VSAM RRDS
files
are supported as VSAM roll files for Natural.
The minimum VSAM control interval size supported by the Natural CICS interface is 4096 and the minimum record size supported by Natural under CICS is the corresponding optimum record size.
NCISCPRI
does not require parameter input in JCL stream.
But if available, it is retrieved (until the end-of-data). The message is not
issued for null files.