This document describes the steps for installing Natural CICS Interface Version 8.3.3 (product code NCI) on z/OS.
For information on how to operate Natural in a CICS environment, see Using Natural with TP Monitors and Natural under CICS in the TP Monitor Interfaces documentation and the following topics:
When used in this document, the notation
vrs
or
vr
represents the relevant product
version (see also Version in the
Glossary).
Wichtig:
Before you install Natural CICS Interface Version 8.3.3, you
need to apply the
Natural
updates announced in the current Natural Release
Notes.
A supported version of the following product must be installed before you can install the Natural CICS Interface:
Adabas CICS Interface (product code ACI), version as specified under Software AG Product Versions Required with Natural in the current Natural Release Notes for Mainframes.
See also General Prerequisites and System Support in the section Overview of the Installation Process.
The installation medium contains the following data sets required for product installation:
Data Set Name | Contents |
---|---|
NCIvrs.LOAD |
Load modules |
NCIvrs.SRCE |
Source modules and macros |
NCIvrs.OBJS |
Object modules |
Copy the data sets into your environment as described in Copying Data Sets to a z/OS Disk in the section Installing Natural.
Sample installation jobs are contained in the NATvrs.JOBS
data set
and are prefixed with the product code. The data set is provided on the
installation medium supplied for base Natural.
When used in this document,
prefix
denotes a common Natural CICS
Interface prefix of 1 to 5 characters, for example, NCI83
. This
prefix is determined by the value of the parameter
PREFIX
in the NTCICSP
macro of the Natural
parameter module, for example, in
Step 4 of the
Installation Procedure.
NTCICSP
and PREFIX
is described in the TP Monitor Interfaces
documentation.
prefix
is followed by specific
characters to make up the names of the following objects:
Before you start the installation procedure for the Natural CICS Interface, be sure to read the following:
System Control under CICS in the TP Monitor Interfaces documentation
The installation procedure comprises the following:
Step 2: Allocate the VSAM RRDS Roll Files for the Natural CICS Interface
Step 3: Build the Natural CICS Interface System Directory Module
Step 7: Link the Natural CICS Interface External CALLNAT Interface Module
(Job I005, Steps 2211 - 2216, 2230 - 2235, 2240 - 2245)
Steps 2211 - 2216 and 2230 - 2235:
Create CICS RDO entries as described in CICS Resource Definitions and apply the batch resource definitions with the DFHCSDUP utility program.
Steps 2240 - 2245 (optional):
These steps are only required if you want to dynamically load an ICU data item without using the SVC instruction on request during a Natural session instead of an entire ICU data library:
Set CFICU=(DATITEM=NONE)
and add one PPT entry for each ICU data item.
See also the corresponding step in Installing International Components for Unicode for Software AG.
ICU data items and ICU data libraries are described in the Unicode and Code Page Support documentation.
(Job I008, Step 2200)
This step must be performed only if VSAM roll files are used as CICS roll facility.
Allocate the VSAM RRDS roll files for the Natural CICS Interface.
The Natural CICS Interface uses VSAM RRDS roll files for optimum performance, which means without CI/CA splits.
(Job I070, Steps 2245, 2250)
Edit, assemble and link the NCISCPCB
module.
The Natural CICS Interface system directory is generated by
assembling and linking the source module NCISCPCB
.
A sample job is contained in the
NATvrs.JOBS
data set and a
comprehensive sample source in the
NCIvrs.SRCE
data set.
For descriptions of the individual macros and parameters contained in
NCISCPCB
, see
NCISCPCB
Generation Parameters in the TP Monitor
Interfaces documentation.
(Job I080, Steps 2210, 2220)
Build the Natural parameter module for the Natural CICS Interface:
The NTCICSP
macro in
the Natural parameter module contains parameters specific to the Natural CICS
Interface. You can generally use the default values for all parameters.
You can generally use the default values for all parameters. Modify only the values of those parameters whose default values do not suit your requirements. The only mandatory parameter without a default value is the common Natural CICS Interface prefix.
To simplify the Natural parameter module installation process, the
source module NTCICSP
contains the NTCICSP
macro request with parameter PREFIX=&SYSPARM
. Thus, when
generating a parameter module for the Natural CICS Interface, assemble the
Natural parameter module with the assembler option
SYSPARM=prefix
rather than editing the
source module.
The individual parameters are described in the section NTCICSP Macro Parameters in the TP Monitor Interfaces documentation.
Modify the settings of the supplied Natural profile parameters as required and in accordance with the settings you specified when building the Natural parameter module for batch mode during the Installation Procedure for base Natural.
Make sure that the profile parameters
FNAT
and
FUSER
are
set to the same values you specified when loading the system file. The
parameters and corresponding macros (if applicable) are described in the
Parameter
Reference documentation.
Assemble and link the Natural parameter module.
(Job I080, Step 2230)
Link the environment-dependent nucleus for the Natural CICS Interface with the following modules:
NCINUCM
,
NCINUC
and the Natural parameter module built in
Step 4.
Include the CICS stub module DFHELII
(do not use
DFHEAI
).
When linking the environment-dependent nucleus or its
subcomponents, you may receive IEW2646I
or IEW2660W
messages, which can be ignored.
See also Natural Nucleus under CICS in the TP Monitor Interfaces documentation.
(Job I080, Step 2250)
Link the Natural CICS Interface system directory into your CICS user
library under the module name prefixCB
(see Prefix Used for
Natural CICS Interface Components).
The Natural CICS Interface system directory must be linked
with the NORENT
option.
(Job I080, Steps 2270, 2271)
This step must be performed only if you want to use the external
CALLNAT
interface module of the Natural CICS Interface.
For more information, see Natural 3GL CALLNAT Interface - Purpose, Prerequisites, Restrictions in the Operations documentation.
Link the external CALLNAT
interface module
NCIXCALL
by using the NCIXCALM
module.
See also and Natural Nucleus under CICS in the TP Monitor Interfaces documentation.
Step 2270 is needed if the NCIXCALL
module has been
installed in the same CICS region with a previous Natural version. The previous Natural
version NCIXCALL
module must then be assigned a new name, for
example NCIXCIOV
. Thus, you can preserve the name of the
NCIXCALL
module used in the previous version and need not link it
to all your 3GL programs using it.
Step 2271 links the module NCIXCALL
for the current
Natural version.
(Job I080, Step 2275)
This step must be performed only if you want to use the node error program (NEP) of the Natural CICS Interface. See also CICS Node Error Program Considerations for Natural in the TP Monitor Interfaces documentation.
Link the Natural CICS Interface module NCIZNEP
by using
the NCIZNEPM
module.
See also and Natural Nucleus under CICS in the TP Monitor Interfaces documentation.
(Job I080, Step 2280)
This step must be performed only if you want to use Natural with the CICS 3270 Bridge. See also CICS 3270 Bridge Support in the TP Monitor Interfaces documentation.
Link the Natural CICS Interface module NCIXFATU
under
the name
prefixXFA
(see
Prefix Used for Natural
CICS Interface Components) by using the NCIXFATM
module.
See also and Natural Nucleus under CICS in the TP Monitor Interfaces documentation.
(Job I080, Step 2290)
This step must be performed only if you want to use the Natural RPC
server front-end under CICS. This step is only generated if the
System Maintenance Aid
(SMA) parameter NAT-RPC
is set to
Y
(Yes). NAT-RPC
is used in connection with the SMA
parameter NCI-RPC-FRONT
.
Define the name of the Natural RPC server front-end with the SMA
parameter NCI-RPC-FRONT
.
Link the Natural RPC server front-end module NCIRSFE
under the defined name by using the NCISFEDM
module.
(Job I081, Step 2200)
This step must be performed only if VSAM roll files are used as CICS roll facility.
Initialize the VSAM roll files.
This step must be repeated for all roll files used if roll files are the primary roll facility.
A VSAM RRDS file is a direct (random) access type file that must be formatted.
For the Natural CICS Interface VSAM roll files, formatting is done by
the NCISCPRI
batch program. To execute NCISCPRI
, the
Natural roll file to be initialized has to be assigned the file name
ROLL
in the JCL DD statement. No other parameter input is required for
NCISCPRI
; all data required for file initialization is obtained by
SHOWCB
VSAM macro calls.
For descriptions of the messages that can be output during this step, see NCISCPRI Warnings and Error Messages in the TP Monitor Interfaces documentation.
The Natural CICS Interface modules described in this section use startup
parameters to initialize Natural CICS Interface components. The
EXEC CICS ASSIGN
command retrieves the value set by
these startup parameters with the INITPARM
option using the
following syntax:
INITPARM=(module='parameter',)... |
where:
module
is the name of the
module that uses a startup parameter.
parameter
the name of the
corresponding parameter.
The relevant Natural CICS Interface modules and corresponding parameters are described in the following section:
parameter
is the name of an NCIXCALL
module from a previous Natural version
(for example, NCIXCIOV
), if available. The NCIXCALL
module from the previous Natural version must be linked to assign it the new
name (see Step
7: Link the Natural CICS
Interface External CALLNAT Interface Module).
For more information, see Natural 3GL CALLNAT Interface - Purpose, Prerequisites, Restrictions in the Operations documentation.
parameter
is the name of the NCIZNEP
module linked in
Step 8: Link the Natural CICS Interface
Node Error Program.
For more information on the NCIXFATU
module, see
CICS 3270 Bridge
Support in the TP Monitor Interfaces
documentation.
parameter
is the name of the NCIZNEP
module linked in
Step 8: Link the Natural CICS Interface
Node Error Program.
For more information on the NCIZNEP
module, see
CICS Node Error
Program Considerations for Natural in the TP
Monitor Interfaces documentation.
The individual NCIZNEP
parameters are described in the
following section:
- MSGTRAN - Internal Message Switching Transaction ID
This parameter specifies the transaction ID internally used by the Natural message switching and asynchronous session flushing facilities.
This parameter has the same meaning as the
MSGTRAN
parameter inNTCICSP
(see the TP Monitor Interface documentation) and must be specified identically.Possible values are:
Value: Explanation: transaction-id
Any valid CICS transaction ID. The Natural CICS Interface clean-up function is done by starting an asynchronous task to resume the terminal-bound session and to terminate it logically. Therefore, normally the original transaction ID of the session is used. This original transaction ID cannot be used if there is a front-end program calling Natural, as most likely the front-end is not prepared for being invoked asynchronously without a terminal. In such situations the message switching transaction ID of the Natural CICS Interface is used to deal with Natural directly.
NMSG
This is the default value. - NEPTRAN - Transaction ID for the NCIZNEP Module
This parameter specifies the transaction ID for the Natural/CICS Interface node error program (NEP)
NCIZNEP
in an MRO environment, when the parameterPURGE
(see below) is set toYES
.Possible values are:
Value: Explanation: transaction-id
Any valid CICS transaction ID. NETR
This is the default value. - PURGE - Purge Active Natural Task
This parameter defines how
NCIZNEP
is to treat Natural sessions currently active, when the Natural/CICS Interface node error program (NEP) is invoked.Possible values are:
Value: Explanation: NO
This is the default value for compatibility reasons. The active Natural task is not purged. The active task will continue to run until a terminal I/O later on will result in abend
NT08
due to a CICS TERMERR condition, as the terminal no longer exists.YES
The active Natural task is purged immediately. This functionality is supported in CICS Transaction Server systems only.
In MRO environments, a node error program is triggered in the CICS TOR; as the Natural session most likely is active in a CICS AOR, the task purge cannot be done in the TOR. Therefore, a transaction ID is required (see
NEPTRAN
above) to start a "partner" NEP task in the AOR to do the task purge.Anmerkung:
PURGE=YES
requires that the relevant Natural transactions are defined as purgeable (SPURGE(YES)
).- TSKEY - Prefix for Natural CICS Temporary Storage Key
This parameter defines the constant prefix of the temporary storage queue holding the Natural CICS Interface pseudo-conversational restart data.
Possible values are:
Value: Explanation: xxxx
xxxx
defines the prefix for pseudo-conversational restart data.NCOM
This is the default value. This parameter has the same meaning as the second subparameter of the parameter
TSKEY
in theNCMDIR
macro (see the TP Monitor Interfaces documentation) and must be specified identically.
parameter
is the name of the NCIRSFE
module linked for the Natural RPC
server in Step 10: Link the Natural RPC Server
Front-End.
The following is an example of an INIPARM
specification:
INITPARM=( NCI83CAL='NCI82CAL', * NCIXCALL module NCI83ATU='NCI83NEP', * NCIXFATU module NCI83NEP='MSGTRAN=NMSG,TSKEY=NCOM,PURGE=YES', * NCIZNEP module NCI83SFE='NATTRAN=NC83,MSGDEST=CSSL', * NCIRSFE module )
This section describes the resource definitions required or recommended for customizing your CICS system.
Anmerkung:
We generally
recommend that you keep all Natural version-dependent components such as
programs, transactions and files in a separate resource group. Such a group is
represented by natgroup
in this
section.
Add a program definition for the environment-dependent nucleus:
DEFINE PROGRAM(dep-nuc) GROUP(natgroup) LANGUAGE(ASSEMBLER) * DESCRIPTION(ENVIRONMENT-DEPENDENT NUCLEUS)
where:
dep-nuc
is the
environment-dependent nucleus linked in
Step 4.
We recommend that you set the following parameter values in the CICS program definition:
DATALOCATION(ANY)
API(OPENAPI)
CONCURRENCY(THREADSAFE)
These parameter must be set when running Natural in a CICS OTE (open transaction environment).
Program attributes (for example, EXECKEY
or
DATALOCATION
) are inherited from the environment-dependent nucleus
because standard linkage conventions (BALR 14,15) are used for the program
calls. Examples are calls for the environment-independent nucleus, the Adabas
CICS Interface or Natural calls (SET CONTROL 'P=S'
) for external
programs.
This definition is optional.
Add a program definition for the environment-independent nucleus:
DEFINE PROGRAM(ind-nuc) GROUP(natgroup) LANGUAGE(ASSEMBLER) * DESCRIPTION(NATURAL ENVIRONMENT-INDEPENDENT NUCLEUS)
where ind-nuc
is the name
of the environment-independent
nucleus specified with the Natural profile parameter
NUCNAME
.
The default name is INDNUCvr
. You need
not specify EXECKEY
or DATALOCATION
for the
environment-independent nucleus as all attributes of the environment-dependent
nucleus are inherited since standard linkage conventions (BALR 14,15) are
used.
To access the environment-independent nucleus in the ELPA,
specify USELPACOPY(YES)
for this program definition and
LPA=YES
in the CICS startup parameters.
This definition is optional.
This definition is only required if you want to use Natural features
supplied as selectable
units (see the Operations documentation) with
the NATSUPGM
load module. NATSUPGM
is loaded
dynamically as an external module that is called during program execution.
Add a program definition to load the selectable units module
NATSUPGM
:
DEFINE PROGRAM(NATSUPGM) GROUP(natgroup) LANGUAGE(ASSEMBLER) * DESCRIPTION(NATURAL SELECTABLE UNITS MODULE)
Add a program definition for the Natural CICS Interface system directory:
DEFINE PROGRAM(CB) GROUP(natgroup) LANGUAGE(ASSEMBLER) * DESCRIPTION(NATURAL CICS INTERFACE SYSTEM DIRECTORY)
This definition is optional.
Add a program definition for the external CALLNAT
interface module:
DEFINE PROGRAM(ncixcall) GROUP(natgroup) LANGUAGE(ASSEMBLER) * DESCRIPTION(NATURAL CICS INTERFACE EXTERNAL CALLNAT MODULE)
where ncixcall
is the name
of the NCIXCALL
module specified in
Step
7: Link the Natural CICS
Interface External CALLNAT Interface Module.
We recommend that you set the following parameter value in the CICS program definition:
DATALOCATION(ANY)
This definition is optional.
Add a program definition for the node error program (NEP) of the Natural CICS Interface:
DEFINE PROGRAM(nciznep) GROUP(natgroup) LANGUAGE(ASSEMBLER) * EXECKEY(CICS) * DESCRIPTION(NATURAL CICS INTERFACE NODE ERROR PROGRAM)
where nciznep
is the NEP
name specified in Step
8: Link the Natural CICS
Interface Node Error Program.
This definition is optional.
Add a program definition for the XFAINTU
global user
exit:
DEFINE PROGRAM(prefixXFA) GROUP(natgroup) LANGUAGE(ASSEMBLER) * EXECKEY(CICS) * DESCRIPTION(NATURAL CICS INTERFACE XFAINTU GLUE)
This definition is optional.
This definition is only required if you want to use the Natural RPC
server front-end ncisfe
. This
definition is only generated if the
System Maintenance Aid
(SMA) parameter NCI-RPC-FRONT
is set.
Add a program definition for the Natural RPC server front-end:
DEFINE PROGRAM(ncirsfe) GROUP(natgroup) LANGUAGE(ASSEMBLER) * DESCRIPTION(NATURAL RPC SERVER FRONT-END)
where:
ncirsfe
is the name of the
NCIRSFE
module specified for the Natural RPC server front-end in
Step 10: Link the Natural RPC Server
Front-End.
We recommend that you set the following parameter values in the CICS program definition:
DATALOCATION(ANY)
API(OPENAPI)
CONCURRENCY(THREADSAFE)
We recommend that you define or choose a CICS profile for the Natural transactions similar to the following:
DEFINE PROFILE(natprof) GROUP(natgroup) * DESCRIPTION(CICS PROFILE FOR NATURAL TRANSACTIONS) * SCRNSIZE(ALTERNATE) INBFMH(ALL)
where natprof
is the name of
the CICS profile assigned to the Natural transactions.
We also recommend that you define a CICS transaction class for the Natural transactions similar to the following:
DEFINE TRANCLASS(natclass) GROUP(natgroup) MAXACTIVE(999) * DESCRIPTION(CLASS FOR NATURAL TRANSACTIONS)
where natclass
is the name of
the CICS transaction class assigned to the Natural transactions.
A CICS transaction class dedicated to Natural helps control storage usage by Natural (see also Controlling Storage Usage in the TP Monitor Interfaces documentation). Assign this transaction class to the definitions of all transactions that directly or indirectly call Natural.
You can define the following:
Add a definition for the Natural transaction:
DEFINE TRANSACTION(ncitransact) GROUP(natgroup) * PROGRAM(dep-nuc) TWASIZE(128) DUMP(NO) SPURGE (YES) * PROFILE(natprof) TRANCLASS(natclass)
where:
ncitransact
is the
name of the Natural CICS Interface user transaction ID.
dep-nuc
is the
environment-dependent nucleus linked in
Step 5.
We recommend that you set the following parameter values in the CICS transaction definitions:
TASKDATALOC(ANY)
ISOLATE(YES)
TASKDATALOC(ANY)
can have an impact on non-Natural
programs called by Natural; for details, see the relevant IBM literature on
CICS.
For the impact of transaction isolation, see also THRDSZE - Thread Size in the TP Monitor Interfaces documentation.
Add a definition for the Natural internal message switching transaction:
DEFINE TRANSACTION(nmsg) GROUP(natgroup) * PROGRAM(dep-nuc) TWASIZE(128) DUMP(NO) SPURGE (YES) * PROFILE(natprof) TRANCLASS(natclass)
where:
dep-nuc
is the
environment-dependent nucleus linked in
Step 5.
nmsg
is the name of the
Natural CICS Interface message switching transaction ID as defined in the
MSGTRAN
parameter described in NTCICSP Macro Parameters in the
TP Monitor Interfaces documentation. The default name is
NMSG
.
We recommend that you set the following parameter values in the CICS transaction definitions:
TASKDATALOC(ANY)
ISOLATE(YES)
TASKDATALOC(ANY)
can have an impact on non-Natural
programs called by Natural; for details, see the relevant IBM literature on
CICS.
For the impact of transaction isolation, see also THRDSZE - Thread Size in the TP Monitor Interfaces documentation.
This definition is optional.
Add a definition for the node error program (NEP) of the Natural CICS Interface:
DEFINE TRANSACTION(neptran) GROUP(natgroup) * PROGRAM(nciznep) DUMP(NO) PRIORITY(255) * TASKDATAKEY(CICS) TASKDATALOC(ANY) * PROFILE(natprof)
where:
neptran
is the NEP
transaction code defined with the NEPTRAN
parameter of
the NCIZNEP
module linked in
Step 8: Link the Natural CICS Interface
Node Error Program.
nciznep
is the NEP name of
the NCIZNEP
module linked in
Step 8: Link the Natural CICS Interface
Node Error Program.
Add a definition for the Natural RPC server front-end transaction:
DEFINE TRANSACTION(ncisfetransact) GROUP(natgroup) * PROGRAM(ncirsfe) TWASIZE(128) DUMP(NO) SPURGE (YES) * PROFILE(natprof) TRANCLASS(natclass)
where:
ncisfetransact
is the
name of the Natural RPC server front-end transaction ID.
ncirsfe
is the name of
the NCIRSFE
module specified for the Natural RPC server front-end
in Step 10: Link the Natural RPC Server
Front-End.
These definitions are only required if VSAM roll files are to be used.
Add one entry in the FCT for each Natural CICS Interface VSAM roll file:
DEFINE FILE(prefixR1) GROUP(natgroup) * BROWSE(YES) ADD(YES) DELETE(YES) UPDATE(YES) READ(YES) * RECORDFORMAT(F) STRINGS(3) DATABUFFERS(5)
Local shared resources (LSR) should be used whenever possible. If multiple LSR pools are supported, one pool should be dedicated exclusively to Natural CICS Interface roll files.
This definition is optional but highly recommended to log Natural CICS Interface informational messages and Natural abend codes and corresponding error messages.
Add entries in the DCT for the Natural CICS Interface error message logging facility. For Natural error messages, you can use:
A destination that is already defined in CICS (for example, CSSL); in this case, no extra DCT entry is required.
An extra partition destination as a synonym for an existing CICS message destination:
DEFINE TDQUEUE(nerr) GROUP(natgroup) TYPE(INDIRECT) * INDIRECTNAME(name)
where:
nerr
is the name of the
Natural CICS Interface error message destination as defined in the
MSGDEST
parameter described in NTCICSP Macro Parameters in the
TP Monitor Interfaces documentation. The default name is
NERR
.
name
is the name of the
corresponding indirect destination.
An extra file:
DEFINE TDQUEUE(nerr) GROUP(natgroup) TYPE(EXTRA) * DDNAME(NATMSG) OPEN(INITIAL) TYPEFILE(OUTPUT) * RECORDFORMAT(VARIABLE) BLOCKFORMAT(UNBLOCKED) * RECORDSIZE(nnn)
where nerr
is the name of
the Natural CICS Interface error message destination as defined in the
MSGDEST
parameter described in NTCICSP Macro Parameters in the
TP Monitor Interfaces documentation. The default name is
NERR
.
You can, for example, change the BLOCKFORMAT
format from UNBLOCKED
to BLOCKED
. Natural and the
Natural CICS Interface messages have a length of up to 120 bytes. Therefore,
the record size (RECORDSIZE (nnn)
)
should be at least 124 bytes for variable record format or 120 bytes for fixed
record format.
Sufficient disk space must be reserved for this data set; a DD statement must be added to the CICS startup JCL.
Add one entry in the DCT for the Natural
NATRJE utility (described in the
Utilities documentation). When submitting a job to JES
with the following entry, the internal reader is started on CLOSE
of the destination:
DEFINE TDQUEUE(nrje) GROUP(natgroup) TYPE(EXTRA) * DDNAME(NATRJE) OPEN(DEFERRED) TYPEFILE(OUTPUT) * RECORDFORMAT(FIXED) BLOCKFORMAT(UNBLOCKED) RECORDSIZE(80)
where:
nrje
is the name of the
Natural CICS Interface submit destination as defined in the
RJEDEST
parameter described in NTCICSP Macro Parameters in the
TP Monitor Interfaces documentation. The default name is
NRJE
.
Additionally, add the following DD statement to the CICS startup JCL:
//NATRJE DD SYSOUT=(*,INTRDR)
When submitting a job to JES with the following two entries, the Natural CICS Interface deals with an indirect destination that will not be closed:
DEFINE TDQUEUE (nrje) GROUP(natgroup) TYPE(INDIRECT) * INDIRECTNAME(name) DEFINE TDQUEUE(name) GROUP(natgroup) TYPE(EXTRA) * DDNAME(NATRJE) OPEN(DEFERRED) TYPEFILE(OUTPUT) * RECORDFORMAT(FIXED) BLOCKFORMAT(UNBLOCKED) RECORDSIZE(80)
where:
nrje
is the name of the
Natural CICS Interface submit destination as defined in the
RJEDEST
parameter described in NTCICSP Macro Parameters in the
TP Monitor Interfaces documentation. The default name is
NRJE
.
name
is the name of the
corresponding indirect destination.
You can use either a /*EOF
card as the very last card
in the job stream or the corresponding NATRJE
exit. When detecting
the /*EOF
card, JES submits the previous job stream.
This definition is optional.
Add one entry in the DCT for the Natural CICS Interface session statistics:
DEFINE TDQUEUE(nlog) GROUP(natgroup) TYPE(EXTRA) * DDNAME(NATLOG) OPEN(INITIAL) TYPEFILE(OUTPUT) * RECORDFORMAT(VARIABLE) BLOCKFORMAT(BLOCKED) * RECORDSIZE(4624) BLOCKSIZE(4628)
where nlog
is the name of
the Natural CICS Interface logging destination as defined in the parameter
LOGDEST
described in the TP Monitor Interfaces documentation. The
default name is NLOG
.
Sufficient disk space must be reserved for this data set; a DD statement must be added to the CICS startup JCL.
This definition is optional.
Add one entry in the DCT for the Natural CICS Interface profile parameter file:
DEFINE TDQUEUE(nprm) GROUP(natgroup) TYPE(EXTRA) * DDNAME(CMPRMIN) OPEN(DEFERRED) TYPEFILE(INPUT) * RECORDFORMAT(FIXED) BLOCKFORMAT(BLOCKED) * RECORDSIZE(80) BLOCKSIZE(nnn)
where:
nprm
is the name of the
Natural CICS Interface profile parameter input destination as defined in the
PRMDEST
parameter described in NTCICSP Macro Parameters in the
TP Monitor Interfaces documentation. The default name is
NPRM
.
nnn
is a multiple of 80.
A DD statement must be added to the CICS startup JCL.
Add the following system abend codes to a CICS System Recovery Table (SRT):
0D6 |
Protects CICS against failing Natural Roll Server and Natural Authorized Services Manager requests (using PC instructions) by Natural. |
01D |
Protects CICS against failing data space cache requests by Natural. |
DC2 |
Protects CICS against failing memory object cache requests by Natural. |
You can verify the successful installation of the Natural CICS Interface by performing the following steps:
From a CICS session, type in the Natural transaction ID to start a Natural session.
Proceed with the steps described in the section Test Online Natural.