This Dokument describes the functionality of the Natural CICS Interface.
It covers the following topics:
OSCOR/GETVIS - Natural Components in CICS Dynamic or Operating System Storage
Natural CICS Interface System Control Records in CICS Temporary Storage
The Natural CICS Interface is implemented in command level Assembler, thus allowing Natural to be compatible with the CICS Multiple Region Option and the debugging facility CEDF.
The Natural CICS Interface controls session initialization, roll-in restart (in pseudo-conversational mode), terminal I/O, database access, ABEND processing, Natural local buffer pool calls and the loading, linking to and releasing of external subroutines. In addition, all roll I/O operations are made from the Natural CICS Interface.
The Natural nucleus is a combination of the reentrant Natural module and various support routines, which are delivered as source programs requiring site-dependent assemblies and as load modules.
The CICS-related components of the Natural nucleus are:
the Natural CICS Interface module NCISTART
This is the entry routine, which in particular prepares the Natural CICS Interface Language Environment (LE) linkage; see Natural CICS Interface and IBM Language Environment (LE). The module is CICS version dependent.
the Natural CICS Interface module NCIROOT
This module holds all CICS related logic as CICS services and CICS control block access. The module is CICS version dependent.
the Natural CICS parameter module NCIPARM
This module holds Natural CICS Interface runtime and system environment generation options. The module is not CICS version dependent, although some of the parameters should be set depending on the CICS version.
the Natural CICS Interface object-only part NCINUC
This module holds service routines called by the Natural nucleus and
Natural CICS Interface system control logic. These routines are independent of
CICS and CICS version and are dealing with CICS by calling CICS service
routines in NCIROOT
and NCISTART
.
the Natural CICS Interface module NCIXCALL
This module is a separate program in CICS, that is, it is not linked
to the Natural nucleus, as it is invoked via EXEC CICS LINK
from
3GL programs called by Natural; see
Natural 3GL
CALLNAT Interface in the Operations
documentation. The module is CICS version dependent.
Natural features specific to CICS include the organization of dynamic storage in threads and the additional capability of handling these threads so that the Natural CICS System Control Program can more efficiently handle dynamic storage.
The Natural CICS System Control Program was initially developed to overcome the 64 KB GETMAIN limit under CICS. It provides complete storage allocation and management functions, including roll file I/O operations and relocation functions for pseudo-conversational users.
In order to enhance the pseudo-conversational processing capabilities of Natural with CICS, the System Control Program uses threads, a contiguous amount of storage which is set up for each user. This structure allows Natural to manage dynamic storage with minimal CICS involvement.
A complete understanding of system control can be attained from the following discussion of its structure and operation. Ensure that you understand this mechanism before starting the installation procedure of Natural under CICS.
Single CICS Region
The diagram below shows the components of the Natural system that reside in CICS dynamic storage. The components are explained under the following headings:
Scenario 1 applies when running Natural locally in a single CICS application region under z/OS or z/VSE.
Anmerkung:
Note Concerning z/OS Systems: Additional scenarios are possible. The
following three diagrams show combinations of z/OS systems, CICS regions, the
Natural Roll
Server and the Natural Authorized Services
Manager.
Single z/OS With Single CICS Region, Single Roll Server
Single z/OS With Multiple CICS Regions, Single Roll Server and (Optional) Authorized Services Manager
Multiple z/OS With Multiple CICS Regions, Multiple Roll Servers/Authorized Services Managers
Module | Scenario 1 | Scenario 2 | Scenario 3 | Scenario 4 |
---|---|---|---|---|
NTBPI (BPI )
|
TYPE=SWAP,SIZE= nnn
|
n/a | n/a | n/a |
NCMDIR CICSPLX
|
NO |
NO |
YES/MODE |
YES/MODE |
NCMDIR SIPSERV
|
NO |
NO/YES |
yes |
yes |
NCMDIR ROLLSRV
|
NO |
yes |
yes |
yes |
Roll Server
CF structure name |
n/a | none | none | name
|
Authorized Services Manager/SIP | n/a | n/a | SIP slot number/size | XCF group name/CF structure name |
The Natural CICS Interface requires a SIP slot size of 256 bytes.
Anmerkung:
For the scenarios 2, 3 and 4, the very first Natural session
initializing the NCI environment must have the
SUBSID
parameter set to the value of the corresponding
Roll Server
and/or Authorized Services
Manager.
A thread is a contiguous storage area from where Natural requests all its required storage. It can either be storage shared by several Natural users or, in 31-bit mode environments, CICS user storage above the 16 MB line dedicated to a specific task.
Each storage thread can be seen as the "address space" for a Natural user. Each memory allocation request issued by the Natural nucleus is transferred to the system control program to be satisfied from the storage thread.
Storage threads are allocated when the Natural CICS Interface is initialized. They are allocated in a CICS region or partition, in which case they are permanent (shared) threads or they are allocated during the start of a Natural CICS task, in which case they are exclusive threads (task-dependent user storage).
The technique of storage threads was implemented with Natural for the following reasons:
To overcome the 64 KB limitation of CICS for user storage in non-31-bit mode systems.
To be able to optimize rolling (formerly, each piece of user storage had to be written to the roll medium; now, as there is a contiguous storage area, this area is compressed by making the relevant portions contiguous to each other before rolling out).
The Natural CICS Interface tries to satisfy all GETMAIN
requests of a Natural session from its thread. This is faster than
GETMAIN
requests by means of CICS service calls. This is
particularly true for CICS command level calls, as the CICS EXEC
Interface Program (EIP
) is involved, too.
A thread is released by the owning task with every screen I/O. This is true for both conversational and pseudo-conversational tasks. When a session is resumed, its storage is rolled into a thread again, unless its storage is still there; that is, no other task used the thread in between.
The Natural thread selection algorithm balances thread usage to minimize roll I/Os. This means that the more threads there are, the better is the chance of finding the old data thus preventing a roll-in. However, the more threads there are, the more paging the operating system must perform to keep all threads efficiently in real storage.
Threads are grouped together depending on their size and their type;
that is, whether they have been pre-allocated as permanently shared storage or
via a GETMAIN
request. The decision on which kind of thread group
to use, is controlled by the CICS transaction code at session initialization
time. All storage threads belonging to the same group have the same size.
The thread should be defined as small as possible; see also the
Buffer
Usage Statistics function of the Natural utility
SYSTP
in the
Natural Utilities documentation. However, the thread must
still be large enough to hold the session with the largest sizes.
If you have separate Natural development and production environments, the rule is to have more smaller threads in the production environment (to serve production requests as soon as possible) and fewer larger threads in the development environment (as Natural programmers normally need larger Natural sizes and have longer "think times").
The very first Natural session allocates all permanent (shared) threads.
As permanent storage threads are shared by several users and as larger
threads allocated via GETMAIN
should not be kept for too much
time, a Natural task releases its thread with each terminal I/O. Previously,
however, the user data have to be saved to be able to restart the Natural
session after the terminal I/O has been performed.
Session data can be saved by using
the Natural Roll Server with its local roll buffer and roll files;
the CICS Roll Facilities;
the Natural swap pool.
See also the various component scenarios. For more information, see Roll Server in the Natural Operations documentation.
CICS Roll Facilities are local CICS storage facilities. They can be either CICS main or auxiliary temporary storage or VSAM relative record data sets (RRDS) which the user has previously defined to CICS. These files allow Natural to store a user's compressed dynamic storage when a roll-out occurs.
When a swap pool is used, the CICS roll facilities only serve as backup for the swap pool. The choice of the roll medium is of greater importance when no swap pool is used, since it affects Natural performance and throughput.
Every CICS service request causes CICS system overhead. So, the larger
the CISIZE
/record size for the roll facility is, the less CPU
overhead occurs due to fewer CICS service calls to roll a Natural session. On
the other hand, larger CISIZE
/record size also means more VSAM
buffer space allocated for the roll facility.
See Performance Considerations for further information on roll facilities.
Warnung: When using the Roll Server, the swap pool and the CICS Roll Facilities are not available. |
The Natural local buffer pool contains all Natural modules during execution and copies of Natural modules once they have been loaded from the Adabas or VSAM system file.
The local buffer pool must be large enough to minimize the number of Natural program loads. However, if the local buffer pool is too large, this means wasted storage and may introduce paging overhead.
The local buffer pool is allocated as GETMAIN
storage, that
is, EXEC CICS GETMAIN SHARED
with all CICS Transaction Server
versions or a GETVIS
request with CICS/VSE in z/VSE. Sufficient
storage must be available in the partition or in the relevant CICS DSA.
A local buffer pool is optional, as Natural can also run with a global buffer pool, which can be shared with other Natural environments such as Natural in Batch Mode (z/OS and z/VSE) or Natural under TSO or Natural under IMS (under z/OS only).
The Natural swap pool offers the possibility to "swap" a compressed Natural session from the thread into a main storage area instead of doing expensive roll I/Os.
The swap pool is allocated as GETMAIN
storage, that is,
EXEC CICS GETMAIN SHARED
with all CICS Transaction Server versions
or a GETVIS
request with CICS/VSE in z/VSE. Sufficient storage
must be available in the partition or in the relevant CICS DSA.
The options for the swap management are set in the Natural CICS source
module NCISCPCB
and by using the Natural profile parameter
BPI
.
The size, name and cache size of the swap pool are specified using
profile parameter BPI
or the
corresponding macro NTBPI
in the Natural parameter
module, that is, the NTBPI
or
BPI
settings in effect for the Natural session
initializing the NCI environment are taken.
For further details on the swap pool, see Natural Swap Pool in the Natural Operations documentation and Using the Natural Swap Pool under CICS.
The swap pool can only be used when running Natural under CICS locally in a single CICS region. However, even in such a scenario, you should consider using the Roll Server instead, because it runs asynchronously to the CICS region and because it can provide more roll buffers in its data space than the swap pool. When using the Roll Server, the swap pool and the Roll Facilities are not available under CICS.
The Natural CICS Interface remembers its permanent
GETMAIN
ed storages, that is, storages acquired via EXEC CICS
GETMAIN SHARED
or operating system GETMAIN
requests for
OSCOR
/GETVIS
storage, in NCI system control records
in CICS main temporary storage.
These system control records are kept for two reasons:
System recovery:
As all NCI related storages are chained of the NCI system directory, the system control records can be used to re-construct storage chains in case of storage corruptions.
Clean up old NCI system after CICS NEWCOPY
of NCI system
directory module:
At NCI system environment initialization, NCI checks for existing system control records, and, if found, NCI frees the associated permanent storages prior to the installation of the new environment.
The CICS temporary storage queue names of these control records are
prefixXCR, where prefix
is the common prefix for Natural CICS components (see NCIPARM
generation parameter PREFIX
) and
X is a hexadecimal value, namely
x'01' |
for the main system control record holding
information about NCI system directory extension, shared threads
(TYPE=SHR ), and secondary SIR blocks (see
NCMDIR generation parameter
USERS ).
|
x'02' |
for the parms system control record holding
information about the NCI shared profile parameters retrieved via file input
(see NCIPARM generation parameter PRMDEST ).
|
x'03' |
for the pools system control record holding information about all local pools belonging toe the NCI environment including a potential swap pool. |
Wichtig:
As the NCI system control records describe a local NCI
environment, these CICS MAIN temporary storage queues must be kept also in the
CICS AOR. This is particularly true when running Natural in CICSPlex.
The name of the Natural CICS Interface system directory module is
prefix CB
by default (see PREFIX
parameter of
NCMPRM
macro) unless
specified explicitly via the DIRNAME
parameter of the
NCIPRM
macro.
The NCIDIREX
exit interface is to set/modify the name of
the Natural CICS Interface system directory module at run-time. This makes it
possible to use the same NCI driver/ NCIPARM
, but use different
NCI environments (thread groups/thread sizes, etc) by accessing different
system directory modules, depending for example on CICS system ID, transaction
ID.
The first 5 characters of the directory module name are also used as part of CICS temporary storage queue names related to the relevant NCI environment. So when running more than one Natural CICS environment in a CICS region, the relevant system directory module names must be different in the first 5 characters.
The NCIDIREX
interface exit is called using standard
linkage conventions (Registers 13, 14, 15 and 1) but in addition with Registers
4 and 5 holding CICS EIB and EISTG addresses to enable the exit to call CICS
services.
Source module XNCIDIRX
contains a sample system
directory module name exit.
Natural sessions may also be executed using distributed transaction
processing (DTP), that is, using APPC or MRO conversations. Formally, such
Natural sessions have a terminal associated (CICS TCTTE), however, this is a
terminal out of a pool (see CICS SESSIONs / CONNECTIONs) and the
"terminal" may change from Natural dialog step to dialog step,
that is, such "terminals" cannot be used as key to save a
session's context over a "screen I/O". Because of this nature,
such Natural sessions are treated by default as asynchronous sessions
(TTYPE=ASYN/ASYL
), and Natural does not deal/communicate with
these terminals, as they are no 3270 devices.
However, there is an exit interface NCIDTPEX
available,
which allows you to run the Natural session in a "conversational
way":
when the exit is available, Natural sets up a terminal bound session
(TTYPE=3270
);
Natural terminal input and output operations
(RECEIVE/SEND/CONVERSE
) are not handled by Natural, but
passed to the exit for further processing.
The source modules XNCIDTPX
and
XNCITIOX
contain samples
of DTP terminal exits.
You can set the FDTPX
generation parameter
of the NCMPRM
macro to YES
to cause a potential DTP
exit to be invoked for all terminal types. This can be helpful, for example, if
you want to analyze terminal output before a EXEC CICS
SEND
operation is executed, or if you want to suppress screen
I/Os.
The 4-character CICS terminal ID which is unique per CICS region is used
by the Natural CICS Interface as part of the session key (SIP server, roll
server, CICS temporary storage queues). For compatibility with Natural, the
Natural CICS Interface uses an 8-character field. This NCI terminal ID can be
made unique over several CICS regions by appending the CICS system ID to the
CICS terminal ID (see UNITID
parameter of
NCMPRM
macro).
Alternatively, the NCITIDEX
terminal ID exit interface can
be used to set that NCI terminal ID. It should be noted that for CICS purposes
(for example, temporary storage queue names, etc) just the first four
characters of the NCI terminal ID are taken. Therefore these 4-character
strings must be unique.
The NCITIDEX exit interface is particularly interesting for session managers under CICS in order to distinguish multiple Natural sessions running at the same physical terminal.
The terminal ID set by a NCITIDEX
exit is used
"externally" by the Natural CICS Interface and is the default for
the Natural system variable *INIT-ID
for "internal" Natural use. (The
*INIT-ID
system variable can subsequently be
modified by the NCIUIDEX
/ NATUEX1
user ID
exit interface.)
The NCITIDEX
interface exit is called by using standard
linkage conventions (Registers 13, 14, 15 and 1), but in addition by using the
Registers 4 and 5 holding CICS EIB and EISTG addresses to enable the exit to
call CICS services.
Source module XNCITIDX
contains a sample terminal
ID exit.
Certain Natural CICS Interface functions cannot work if the first four characters of the logical terminal ID do not match the physical terminal.
As a consequence,
you cannot send a message to a logical terminal by way of message switching,
you cannot use the SYSTP
utility or NEP to
flush a session at a logical terminal.
Natural provides the
NATUEX1
user
exit interface to determine whether or not a user is authorized to use Natural
and to set various Natural system variables.
Whenever a Natural user session is started, the NATUEX1
interface exit is called using standard linkage conventions (Registers 13, 14,
15 and 1).
In a CICS environment, the standard linkage conventions are not sufficient in order to issue CICS service calls and to obtain addressability of CICS control blocks.
Therefore the Natural CICS Interface delivers the load module
NCIUEX1
as a NATUEX1
interface exit in a CICS
environment. This module just sets up addressability in CICS and calls the
NCIUIDEX
interface exit by using standard linkage conventions
(Registers 13, 14, 15 and 1), but in addition by passing CICS related addresses
in other registers: R4 (EIB
), R5 (EISTG
), R6
(TCTTE
).
Thus, if you want to issue requests requiring addressability of the CICS
environment, the NCIUIDEX
user ID exit interface should be used
rather than the standard NATUEX1
interface.
Source module XNCIUIDX
contains a sample user ID
exit.
Wichtig:
With each installation of a new CICS release, the
NCIUIDEX
interface exit must be reassembled and
linked.
By default, Natural always uses the transaction ID the
pseudo-conversational session was started with. This transaction ID can be
changed within Natural by using CALLNAT CMTRNSET
(library
SYSEXTP
). The NCIXIDEX
transaction ID exit interface
can also be used to change the Natural pseudo-conversational transaction
ID.
The NCIXIDEX
interface exit is called by using standard
linkage conventions (Registers 13, 14, 15 and 1), but in addition by using the
Registers 4 and 5 holding CICS EIB and EISTG addresses to enable the exit to
call CICS services. Source module XNCIXIDX
contains a sample
transation ID exit.
Anmerkung:
The transaction ID exit is only invoked prior to
pseudo-conversational screen I/Os under control of the Natural CICS Interface;
that is, the exit is not invoked for conversational screen I/Os (for example,
SET CONTROL 'N'
) or when Natural is invoked from a front-end
program via EXEC CICS LINK
.
The following topics are covered:
The dynamic parameter
TPF=(TPF1,TPF2,TPF3,TPF4,TPF5,TPF6,TPF7,TPF8)
can be set for
driver-specific options by specifying "1" for the
corresponding option.
Supported options are:
TPF1
|
Invoke Adabas linkage module via EXEC CICS LINK
with Adabas parameter in TWA and CICS COMMAREA rather than via DCI.
Enables debugging of Adabas-related problems via CEDF. |
TPF2
|
Dump the whole Natural swap pool. With this parameter setting, the entire Natural swap pool is included in a CICS transaction dump. |
TPF3
|
Dump the whole Natural buffer pool. With this parameter setting, the entire Natural buffer pool is included in a CICS transaction dump. Anmerkung: |
TPF4
|
Dump the whole EDITOR buffer pool.
With this parameter setting, the EDITOR buffer pool is included in a CICS transaction dump. |
TPF6
|
Handle terminal I/O errors by NCI.
With this parameter setting, NCI will not pass control back to
Natural for terminal I/O errors, but will handle it by itself, which results in
one of the error messages |
TPF7
|
Force abend in case of NCI system errors.
With this parameter setting, a program check is forced in case of
|
When specifying 0
(which can also be omitted), the
corresponding option is not set, for example:
TPF=(0,0,0,1)
which is equivalent to
TPF=(,,,1)
The Natural CICS interface reacts on certain settings of the Natural
profile parameter UPSI
:
With profile parameter ETRACE=ON
or
ETRACE=(ON,NOGTF)
:
UPSI=XXXX10XX
causes all CMTRACE trace records to be
written to the Natural CICS Interface message destination (see
NCIPARM
MSGDEST
parameter) in
addition to the CICS trace (message number NCI0110).
UPSI=XXXX11XX
causes all CMTRACE trace records to be
written to the console (WTO) in addition to the CICS trace.
The Natural CICS Interface uses VSE cross-partition communications
(XPCC) for submission to POWER/VSE. These XPCC service calls can be traced by
setting the UPSI
profile parameter:
UPSI=xxxx10xx
causes the XPCC trace records to be written to the Natural CICS Interface
message destination (see NCIPARM
MSGDEST
parameter)
(message number NCI0210).
UPSI=XXXX11XX
causes the XPCC trace records to be
written to console (WTO).
If the first 5 characters in the dynamic parameter string for starting
Natural are ASYN,
, the Natural CICS Interface will always setup an
asynchronous Natural session, regardless of whether the session is
terminal-bound or not.
This may be helpful for testing purposes, particularly with EDF or with other debugging tools installed.
The Natural transactions are all defined with a TWA size of 128 bytes, although the Natural CICS Interface just uses the first 88 bytes of the CICS transaction work area (TWA) for Natural processing of the following functions:
on calling Adabas for the Adabas parameter list (up to 32 bytes), the Natural CICS Interface saves the TWA contents before calling Adabas and restores it after the Adabas call.
on calling external programs for the parameter list address pointers
(up to 20 bytes, see the Natural
CALL
statement), the Natural CICS Interface saves the TWA contents before calling
the external program and restores the TWA call portion after the external
program call.
on invoking a back-end program for the termination message and potential termination data (80 bytes, see Back-End Program Calling Conventions in the Natural Operations documentation).
on returning control to a "LINK" front-end caller for the termination message and potential termination data at session end and the termination message area fully reset to low-value at Natural dialog step end respectively, that is, 80 bytes at session and dialog step end.
for passing LE information at CICS task start (up to 88 bytes, just at start of task).
User programs (front-end, back-end, called external programs) can also take advantage of the CICS TWA to communicate besides Natural, but they should not use the TWA portion used by Natural; for such cases, it is higly recommended to increase the TWA size of the Natural transactions and use TWA portions outside the first 128 bytes.