Version 6.3.8 for Windows
 —  Natural Remote Procedure Call (RPC)  —

Setting Up a Natural RPC Environment

To set up a Natural RPC environment, you must perform the steps described below for all client Naturals and server Naturals and read the platform-specific notes and considerations.


Setting Up a Natural Client

Unless otherwise noted, this instruction applies to all environments.

To set up a Natural client, perform the following steps:

Define the Server Name

Use the Service Directory Maintenance function of the SYSRPC utility to define the name of the server to be used for each CALLNAT statement to be executed remotely.

For details and example screens, refer to Service Directory Concept (in the SYSRPC utility documentation).

The generated directory subprogram NATCLTGS must be made available to the Natural client application. If you have not generated NATCLTGS in your client library, move NATCLTGS to this library or to one of the steplibs.

Optionally, you can use one of the following server selection techniques:

Note for Windows, UNIX and OpenVMS Environments:

Predict servers are not maintained in the SYSRPC utility.

For information on how to connect to a Predict server, see the profile parameter USEDIC or the Dictionary Server Assignments function in the Global Configuration File.

Generate a Client Stub Subprogram

This step applies only if you do not want to or cannot work with automatic Natural RPC execution (see Operating a Natural RPC Environment, Working with Automatic Natural RPC Execution).

For each CALLNAT statement to be executed remotely, use the Stub Generation function of the SYSRPC utility; see Creating Stub Subprograms.

Note that the generated stub must be made available to the Natural client environment. If you did not generate the stub subprogram (interface object) in your client library, move the stub subprogram to this library or to one of the steplibs.

Set the RPC Client-Specific Natural Parameters

Set the Natural profile parameters which are relevant to the client-specific handling of remote procedure calls.

Mandatory Parameters:

Parameter Function
MAXBUFF Maximum buffer size (for automatic RPC execution only)
RPCSIZE Size of buffer used by Natural RPC (for mainframe clients only)

Optional Parameters:

Parameter Function
ACIVERS Define ACI version for use with EntireX Broker ACI
AUTORPC Automatic Natural RPC execution
COMPR Set RPC buffer compression

See also Operating a Natural RPC Environment, Using Compression.

CPRPC Define code page name
DFS Specify RPC client's default server address
RDS Define remote directory server
RPCSDIR Specify name of Natural library in which the Service Directory is located (for mainframe, UNIX and OpenVMS servers only)
TIMEOUT Wait time for RPC server response
TRYALT Try alternative server address

The following notes apply to the use of the EntireX Broker.

Notes:

  1. 1. The names specified with the DFS parameter must identify an active EntireX Broker and must match a server definition in the EntireX Broker Attribute File, see Setting Up an EntireX Broker Environment.
  2. 2. The wait time specified with TIMEOUT is used to set the WAIT field of the EntireX Broker ACI. If TIMEOUT is set to zero, WAIT=YES is set and the client will wait for the CLIENT-NONACT time. If the wait time has elapsed, the remote procedure call is terminated with a corresponding error message. The use of TIMEOUT enables you to take advantage of the transport timeout mechanism provided by the EntireX Broker stubs.

Top of page

Setting Up a Natural Server

A Natural server is a Natural task (server task) that can execute Natural subprograms (services). This Natural task is typically an asynchronous or background task (detached process). The EntireX Broker and the client identify it by using a nodename and a servername.

To set up a Natural server perform the steps described below:

Set the RPC Server-Specific Natural Parameters

Set the platform-dependent Natural parameters which are relevant to the general and server-specific handling of remote procedure calls for the server Natural.

For Mainframe Servers:

  1. Create an RPC-specific Natural parameter module.

  2. Set the keyword subparameters of profile parameter RPC or parameter macro NTRPC (see table below) as desired.

For Windows, UNIX or OpenVMS Servers:

  1. Create an RPC-specific Natural parameter file.

  2. Set the Natural profile parameters (see table below) as desired.

Mandatory Parameters:

Parameter Function
MAXBUFF Maximum buffer size
RPCSIZE Size of buffer used by Natural RPC (for mainframe servers only)
SERVER Start Natural session as an RPC server session
SRVNAME Name of RPC server; see Note for EntireX Broker below.
SRVNODE

Name of node; see Note for EntireX Broker below.

Optional Parameters:

Parameter Function
ACIVERS Define ACI version for use with EntireX Broker ACI
CPRPC Define code page name
LOGONRQ Logon for RPC server request required
NTASKS Minimum and maximum of the number or server replicas (for mainframe servers only)
SRVCMIT Time at which a Natural RPC server automatically commits an RPC conversation or a non-conversational RPC request
SRVTERM Server termination event
SRVUSER User ID for RPC server registry
SRVWAIT Wait time of RPC server for client request
TRACE Define trace level for Natural RPC servers
TRANSP Server transport protocol (no longer required)

The following notes apply to the use of the EntireX Broker.

Notes:

  1. The name specified with SRVNODE must identify an active EntireX Broker and the name specified with SRVNAME must match a server definition in the EntireX Broker Attribute File, see Setting Up an EntireX Broker Environment.
  2. The wait time specified with the SRVWAIT parameter is used to set the WAIT field of the EntireX Broker ACI. If SRVWAIT is not specified or set to zero, WAIT=YES is set and the server will wait for the SERVER-NONACT time. If the wait time has elapsed, a corresponding message is written to the RPC server trace file and the RPC server continues to wait for the next client request. The use of the SRVWAIT parameter enables you to take advantage of the transport timeout mechanism provided by the EntireX Broker stubs.

Ensure Command Mode Usage in Server Session

Start of instruction setTo ensure that your Natural server session will enter command mode

Warning
Do not:
  • put a program onto the Natural stack which never terminates.

  • use a STARTUP program which never terminates.

  • disallow NEXT mode in Natural Security for your server library.

Ensure Unique Adabas ETID Usage

Ensure that the Adabas ETID used by the Natural server session is unique within a certain Adabas nucleus.

Start a Natural Server

To start a Natural server, proceed as described in the section Starting a Natural RPC Server.

This server then waits for remote CALLNAT requests from a client.

Note for Natural in Batch Mode on z/OS or on z/VSE:

For information about servers using the keyword subparameter NTASKS of profile parameter RPC or parameter macro NTRPC, refer to Considerations for Mainframe Natural RPC Servers with Replicas.

Top of page

Setting Up an EntireX Broker Access

To set up an EntireX Broker interface, perform the steps described below:

Provide Access to the EntireX Broker Stub

Make the EntireX Broker stub accessible to your Natural environment. This step depends on the platform used.

Providing Access to the EntireX Broker Stub on Mainframe

Link the EntireX Broker stub NATETB23 to your Natural or specify the profile parameter RCA=BROKER to load NATETB23 dynamically at run-time.

In the following cases NATETB23 cannot be used and you must use a different Broker stub:

To load BKIMBTIA or BKIMBTSO dynamically at run-time, specify RCA=BROKER RCALIAS=(BROKER,stubname).

It is currently not possible to load CICSETB dynamically at run-time.

Refer to the EntireX Communicator documentation for further details.

Providing Access to the EntireX Broker Stub on UNIX

Copy the Natural-specific broker stub natetb.so / natetb.sl from the directory $EXXDIR/$EXX/VERS/lib to the directory specified with NATEXTLIB in the Local Configuration File NATURAL.INI.

Providing Access to the EntireX Broker Stub on Windows

The EntireX Broker stub is made available automatically in the course of the EntireX installation.

Set the ACI Version

Set the profile parameter ACIVERS according to your requirements.

Note:
The ACIVERS value set in the Natural parameter module (mainframe) or parameter file (Windows, UNIX or OpenVMS) can only work if also the EntireX Broker and the EntireX Broker stub support this version.

The table below contains only those ACIVERS values which are associated with a feature that is relevant for the Natural RPC.

Setting Function
ACIVERS=2

(Default) Support of the EntireX Broker functions LOGON and LOGOFF.

The server performs a LOGON to the EntireX Broker before executing the REGISTER, and a LOGOFF after the DEREGISTER.

This does not imply any security checks, but it is a pure EntireX Broker management function, see EntireX Broker function LOGON in the EntireX Broker documentation.

ACIVERS=3

Support of EntireX Broker non-numeric conversation IDs and data volume > 30 KB.

When ACIVERS is set to 3 or higher, the EntireX Broker will also assign non-numeric conversation IDs.

If a Natural client issues an OPEN CONVERSATION statement and the client's ACIVERS is 3 or higher, the EntireX Broker will be able to automatically assign non-numeric conversation IDs. It will not check whether the associated server does accept non-numeric conversation IDs, but only the ACIVERS of the requestor (a Natural client in this case) will be decisive.

Therefore, make sure that both the Natural client and the server support the corresponding ACI version.

In addition, with EntireX Broker ACI Version 3 or higher, the data volume which can be exchanged between client and server in a single request may exceed 30 KB if transport method TCP/IP is used.

Notes:

  1. With EntireX Broker ACI Version 1 or 2, the data volume is limited to 30 KB.
  2. With transport method NET, the EntireX Broker attribute EXTENDED-ACB-SUPPORT must be set to YES in order to support more than 30 KB.
ACIVERS=4

Support of code pages and (for servers only) Natural Security.

With EntireX Broker ACI Version 4 or higher, the Natural RPC supports code pages. For this, the name of the code page can be specified in the profile parameter CPRPC for clients and servers.

The evaluation of the code page is done by the EntireX Broker. The EntireX Broker translates the RPC data sent according to the code page of client and server to the corresponding target code page.

The profile parameter CPRPC can be set on the client and/or on the server. It applies for the current process. This means that the client code page does not need to be identical with the server code page.

The server is enabled to logon to the EntireX Broker using a qualified user ID.

If the profile parameter SRVUSER is set to *NSC and the server is running under Natural Security, the Natural RPC will automatically pass the current Natural user ID (as contained in system variable *USER) and the password defined in Natural Security to the EntireX Broker, where they are checked for conformity with the EntireX Broker security data.

ACIVERS=6

Support of EntireX Encryption (ENCRYPTION-LEVEL).

With EntireX Broker ACI Version 6 or higher, the application programming interface USR4009N may be used to set the ACI field ENCRYPTION-LEVEL.

ACIVERS=7 Support of EntireX compression (COMPRESSLEVEL).

With EntireX Broker ACI Version 7 or higher, the application programming interfaceUSR4009N may be used to set the ACI field COMPRESSLEVEL.

ACIVERS=8 Support of EntireX Security without stub exits (mainframe only).

With EntireX Broker ACI Version 8 or higher, the Natural RPC server issues a KERNELVERS call to get the correct value for the ACI field KERNELSECURITY. In this case it is no longer required to link the EntireX Security exits to the EntireX Broker stubs.

ACIVERS=9 Support of EntireX application identification of the client and server environment and (for servers only) of the Integrated Authentication Framework (IAF).

With EntireX Broker ACI Version 9 or higher, the EntireX Broker stubs send environmental information about client and server (for example, job name) to the EntireX Broker.

With EntireX Broker ACI Version 9 or higher, the Natural RPC server can optionally use IAF for client authentication.

For details, refer to the current EntireX documentation.

Using TCP/IP as Transport Method

If TCP/IP is used as transport method and you use a host name to address the server node, you have the following alternatives:

Top of page

Setting Up an EntireX Broker Environment

In the EntireX Broker Attribute File, add the following:

  1. For each Natural RPC server, a service definition must be specified as follows:

    CLASS=RPC, SERVICE=CALLNAT, SERVER=servername.

  2. If you want to use the conversion services, set CONVERSION=userexit. In this case, you must set the profile parameter CPRPC accordingly.

If you want to use the reliable RPC, additional settings are required for each Natural RPC server that should support reliable RPC:

Note:
If AUTOLOGON=NO or SECURITY=YES is set in the EntireX Attribute File, you must set ACIVERS=2 or higher.

Top of page