Version 4.2.6 for Mainframes (Update)
 —  Messages and Codes  —

Natural System Error Messages 7001-7050

NAT7001: Value for dynamic parameter :1: must be :2:-:3:.

Text Value for dynamic parameter ... must be ...-....
Expl. You have specified a value for a dynamic parameter incorrectly.
A valid value for this parameter must be in the range as indicated
in the error message.
Actn. Either ignore, or invoke Natural again with correct specification
of dynamic parameters.

NAT7002: Value for dynamic parameter :1: must be :2:-:3: or 0.

Text Value for dynamic parameter ... must be ...-... or 0.
Expl. You have specified a value for a dynamic parameter incorrectly.
A valid value for this parameter must be either "0" or in the
range as indicated in the error message.
Actn. Either ignore, or invoke Natural again with correct specification
of dynamic parameters.

NAT7003: Value for dynamic parameter :1: must be 1 special character.

Text Value for dynamic parameter ... must be 1 special character.
Expl. You have specified a value for a dynamic parameter incorrectly.
A valid value for this parameter must be a single special character.
For further information on Natural profile parameters,
please refer to the Natural documentation.
Actn. Either ignore, or invoke Natural again with correct specification
of dynamic parameters.

NAT7004: Value for dynamic parameter :1: must be numeric.

Text Value for dynamic parameter ... must be numeric.
Expl. You have specified a value for a dynamic parameter incorrectly.
For this parameter, a numeric value must be specified.
For further information on Natural profile parameters,
please refer to the Natural documentation.
Actn. Either ignore, or invoke Natural again with correct specification
of dynamic parameters.

NAT7005: Value for dynamic parameter :1: must be :2: characters.

Text Value for dynamic parameter ... must be ... characters.
Expl. You have specified a value for a dynamic parameter incorrectly.
A valid value for this parameter must be a name of 1 to n
characters.
For further information on Natural profile parameters,
please refer to the Natural documentation.
Actn. Either ignore, or invoke Natural again with correct specification
of dynamic parameters.

NAT7006: Value for dynamic parameter :1: must be 1 character.

Text Value for dynamic parameter ... must be 1 character.
Expl. You have specified a value for a dynamic parameter incorrectly.
A valid value for this parameter must be a single character.
For further information on Natural profile parameters,
please refer to the Natural documentation.
Actn. Either ignore, or invoke Natural again with correct specification
of dynamic parameters.

NAT7007: Value for dynamic parameter :1: must be :2: or :3:.

Text Value for dynamic parameter ... must be ... or ....
Expl. You have specified a value for a dynamic parameter incorrectly.
For this parameter, you must specify one of the two value as
indicated in the error message.
Actn. Either ignore, or invoke Natural again with correct specification
of dynamic parameters.

NAT7008: Parameter :1: non-existent or not allowed dynamically.

Text Parameter ... non-existent or not allowed dynamically.
Expl. You have specified an invalid Natural profile parameter dynamically.
The reason may be one of the following:
- You have misspelt a parameter name.
- You have specified a parameter which does not exist
(or is obsolete and no longer exists).
- You have specified a parameter which must not be used dynamically.
For further information on Natural profile parameters,
please refer to the Natural documentation.
Actn. Either ignore, or invoke Natural again with correct specification
of dynamic parameters.

NAT7009: Element missing in value list for parameter :1:.

Text Element missing in value list for parameter ....
Expl. You have specified the values for a dynamic parameter incorrectly.
For this parameter, you must specify a list of several values;
however, one or more of the values were missing.
For further information on valid values for this Natural profile
parameter, please refer to the Natural documentation.
Actn. Either ignore, or invoke Natural again with correct specification
of dynamic parameters.

NAT7010: Too many elements in value list for parameter :1:.

Text Too many elements in value list for parameter ....
Expl. You have specified the values for a dynamic parameter incorrectly.
For this parameter, you must specify a list of several values;
however, you have specified too many values.
For further information on valid values for this Natural profile
parameter, please refer to the Natural documentation.
Actn. Either ignore, or invoke Natural again with correct specification
of dynamic parameters.

NAT7011: ")" missing after values list for parameter :1:.

Text ")" missing after values list for parameter ....
Expl. You have specified the values for a dynamic parameter incorrectly.
For this parameter, you must specify a list of values which must be
enclosed in parentheses; however, the closing parenthesis at the
end of the values list is missing.
Actn. Either ignore, or invoke Natural again with correct specification
of dynamic parameters.

NAT7012: Value for parameter :1: must be a list of elements.

Text Value for parameter ... must be a list of elements.
Expl. You have specified the values for a dynamic parameter incorrectly.
For this parameter, you must specify a list of several values.
For further information on valid values for this Natural profile
parameter, please refer to the Natural documentation.
Actn. Either ignore, or invoke Natural again with correct specification
of dynamic parameters.

NAT7013: The parameter module :1: does not exist.

Text The parameter module ... does not exist.
Expl. You have specified the name of a parameter module; however,
a parameter module of this name does not exist.
Actn. Use valid parameter module name;
if necessary, contact your Natural administrator.

NAT7014: The parameter module :1: is invalid.

Text The parameter module ... is invalid.
Expl. The specified parameter module is invalid for one of the following
reasons:
- it is not a parameter module at all;
- it is not compatible with the current Natural release;
- it is restricted to certain users by the NTUSER macro.
Actn. Ensure that you specified a valid parameter module.
If necessary, contact your Natural administrator.

NAT7015: Value for dynamic parameter :1: must be hexadecimal.

Text Value for dynamic parameter ... must be hexadecimal.
Expl. You have specified the value for a dynamic parameter incorrectly.
A valid value for this parameter must be hexadecimal.
For further information on Natural profile parameters,
please refer to the Natural documentation.
Actn. Either ignore, or invoke Natural again with correct specification
of dynamic parameters.

NAT7016: Parameter :1: may only be specified up to :2: times.

Text Parameter ... may only be specified up to ... times.
Expl. You have invoked Natural with a dynamic parameter which may be
specified several times. However, you have specified the parameter
too often.
For further information on Natural profile parameters,
please refer to the Natural documentation.
Actn. Either ignore, or invoke Natural again with correct specification
of dynamic parameters.

NAT7017: User ID :1: not authorized to use this parameter string.

Text User ID ... not authorized to use this parameter string.
Expl. The parameter string used is restricted to certain user IDs. The
initial user ID passed from the environment doesn"t match with one
of the user IDs specified by the USER profile parameter in the string.
Actn. Add your user ID to the USER parameter list in the desired parameter
string or use an authorized user ID.

NAT7018: Delimiter */ missing at end of profile parameter comment.

Text Ending profile parameter comment delimiter */ missing.
Expl. The dynamic profile parameter string contains a start comment
delimiter "/*" but no end comment delimiter "*/" was found.
All data after the start comment delimiter is ignored.
Actn. Insert an end comment delimiter in the parameter string.

NAT7019: Code page :1: invalid or not defined.

Text Code page ... invalid or not defined.
Expl. The code-page name specified by profile parameter CP was not
found in the Natural code-page table in the module NATCONFG,
or it cannot be used because MULTI=ON in macro NTCPAGE indicates
a multiple-byte code page, i.e. one character may be represented
by more than one byte.
All valid code-page names have to be predefined by macro
NTCPAGE in the source module NATCONFG. Only single-byte character
code-pages can be used for character translation.
Actn. Correct the value for profile parameter CP, or add the desired
code-page name to the Natural code-page table in NATCONFG.

NAT7020: Value for dynamic parameter :1: already used by :2:.

Text Value for dynamic parameter ... already used by ....
Expl. The following profile parameters must have four different values:
DC, IA, ID and STACKD.
Actn. Change the profile parameter values accordingly.

NAT7021: Character translation parameter :1: ignored due to CFICU=ON.

Text Character translation parameter ... ignored due to CFICU=ON.
Expl. A character translation parameter was specified in the Natural
parameter module with one of the following macros: NTTAB, NTUTAB1,
NTUTAB2, NTSCTAB, or by the indicated dynamic profile parameter.
Unicode support is activated, which performs the character translation
instead. Therefore the indicated character translation parameter is
ignored.
Actn. To avoid this message, either remove the character translation parameter
or deactivate Unicode support (parameter CFICU=OFF). If CFICU=ON is
desired, test your applications for correct character translation.

NAT7022: Code page support requires parameter setting CFICU=ON.

Text Code page support requires parameter setting CFICU=ON.
Expl. The profile parameter CP has been set to a value different to from
default (OFF) for code page support, but parameter CFICU=OFF is set.
Code page support requires ICU support. Therefore the CFICU setting
has been changed to ON and the session continues.
Actn. To avoid this error, set either the parameter CFICU=ON or the parameter
CP=OFF, depending on whether you want code page support or not.

NAT7043: Value for dynamic parameter KEY incorrectly specified.

Text Value for dynamic parameter KEY incorrectly specified.
Expl. Either the specified the function-key name waswrong or not defined,
or the specified function-key value was wrong.
Examples of valid KEY parameter specifications are:
KEY=(OFF) - releases all keys defined in parameter module.
KEY=(ON) - takes all keys defined in parameter module.
KEY=(PF1=OFF) - ignores the PF1 value defined in parameter module.
KEY=(PF1=LOGON) - replaces the PF1 value defined in parameter module.
KEY=(PF1="LOGON SYSTEM",PF2="L PROGRAM")
- replaces PF1 and PF2 values defined in parameter
module.
Actn. Restart Natural with a valid specification of the KEY parameter.

NAT7050: The product license module is missing or invalid.

Text The product license module is missing or invalid.
Expl. The license module for Natural is not linked to the nucleus or it
was incorrectly generated by the license-file conversion utility.
The session cannot start without a correct product license.
Actn. Generate and link a correct license module. If you have no
correct license file, please contact Software AG.

Top of page