This document describes using the COBOL Mapping Editor to extract from an IMS BMP COBOL server with a standard COBOL call interface using IMS PCB pointers.

• Introduction

• Extracting from an IMS BMP Standard Call Interface

• Mapping Editor User Interface

• Mapping Editor IDL Interface Mapping Functions

• Programming Techniques

---

Introduction

If your IMS BMP program contains PCB pointers, you have assigned the IMS PSB list in the previous step Step 4: Define the Extraction Settings and Start Extraction. If a required IMS PSB list is not assigned, the PCB pointers are not detected; go back to Step 4: Define the Extraction Settings and Start Extraction and assign the IMS PSB list first.

If the IMS PSB list is correctly assigned, the COBOL data items (including the PCB pointers) can be evaluated by the extractor because this type of COBOL server contains a PROCEDURE DIVISION header (see PROCEDURE DIVISION Mapping) with all parameters. In most cases the offered COBOL data items will be correct, but you should always check them manually.

If you have selected an IDL file and opened the COBOL Mapping Editor with an existing COBOL to IDL mapping, continue with Mapping Editor User Interface.

Extracting from an IMS BMP Standard Call Interface

If you are extracting IDL from a COBOL source or extending the IDL file by extracting an additional COBOL source with interface type IMS BMP with standard linkage calling convention, the Extractor Settings dialog appears (see also Step 4: Define the Extraction Settings and Start Extraction).

Make sure the interface type is correct.

You can set optionally the IMS PSB List. If your COBOL server contains PCB pointers, choose Browse. Otherwise, the PCB pointers are not detected and cannot be provided by the IMS RPC Server to your COBOL server at runtime, and unexpected behavior may occur. For the contents of the IMS PSB list, see IMS PCB Pointer IDL Rules.

To select the COBOL interface data items of your COBOL server

1. Add the COBOL data items to the COBOL Interface using the context menu or toolbar available in the COBOL Source View and COBOL Interface. See Notes.

2. Continue with COBOL to IDL Mapping.

Notes:

1. If there is a PROCEDURE DIVISION header available, the parameters listed define exactly the COBOL interface. These COBOL data items are within the LINKAGE SECTION and are already selected to the COBOL interface in initial state when you enter the COBOL Mapping Editor. The PROCEDURE DIVISION header might not be available if you are extracting from a copybook or part of the COBOL source.
2. It is very important to select the right COBOL data items describing the interface of the COBOL server correctly. This means the COBOL data items used as parameters must match in number and in sequence of formats (COBOL usage clause).
3. If your COBOL server contain REDEFINEs, the first REDEFINE path is offered by default. Check manually whether this is the one you want. If not, correct it. You can select any other REDEFINE path.
4. Make sure the PCB pointers are also selected at the correct position.

The user interface of the COBOL Mapping Editor is described below.

Mapping Editor User Interface

This section assumes you have set the extraction settings as described above. The following areas of the COBOL Mapping Editor user interface are described here:

• COBOL Program Selection

• COBOL Source View

• COBOL to IDL Mapping

For COBOL server programs with standard call interface types, the user interface of the COBOL Mapping Editor looks like this:

	COBOL Program Selection. Currently selected program with interface type  More info
	COBOL Source View. Contains all related sources for the currently selected COBOL program  More info
	COBOL to IDL Mapping. Tree view of your selected COBOL data items and mapping buttons with which you can map these items to your IDL interface  More info

COBOL Program Selection

The COBOL Program Selection displays the current selected COBOL program with its interface type. If you have extracted more than one COBOL program within the associated IDL file, you can switch to another COBOL program with its mapping by selecting the name in the combo box.

COBOL Source View

All COBOL data items contained in the LINKAGE and WORKING-STORAGE SECTION are offered in a text view. The text view contains all related sources (including copybooks) for the currently selected COBOL program. It is used for selecting data items and retrieving information from the original COBOL sources. The light green bar indicates that the data item is already contained in the COBOL Interface; a dark green bar indicates the data item is selectable and can be added to the COBOL Interface. This section can be collapsed. If you open the Editor with Modify Interface it is collapsed by default. The toolbar provides the following actions:

	Add selected COBOL data item to COBOL Interface.
	Remove selected COBOL data item from COBOL Interface.
	Remove all COBOL data items from COBOL Interface.
	Reset COBOL Interface to initial state.
	Show dialog to find text in Source.

The same functionality is also available from the context menu.

COBOL to IDL Mapping

This section covers the following topics:

• COBOL Interface
• Mapping Buttons
• IDL Interface

COBOL Interface

The COBOL Interface shows a tree view of your selected COBOL data items describing the interface of the COBOL server. A context menu is available for the COBOL data items, which provides mapping and other functions. On some COBOL data items, decision icons indicate where particular attention is needed, including mapping icons to visualize the COBOL data type and your current mapping.

The COBOL data item names are derived from the COBOL source from which they were extracted. If your COBOL interface contains parameters without a name, that is, the keyword FILLER is used, those COBOL data items are shown as [FILLER]. See FILLER Pseudo-Parameter.

You can modify the COBOL interface using context menu or toolbar; decision and mapping icons provide additional information.

Context Menu

The context menu on COBOL data items provides the following mapping and other functions, depending on the data item type, the COBOL level and the current mapping.

Map to In | Out | InOut	A suppressed COBOL data item becomes visible in the IDL interface. Used also to select another REDEFINE path.
Suppress	Suppress unneeded COBOL data items.
Set Constant	Set COBOL data items to constant.
Remove from COBOL Interface	Remove the data item from the COBOL interface. This also removes the mapped IDL parameter from all IDL interfaces for the current COBOL program. See COBOL Program Selection.

See also Mapping Editor IDL Interface Mapping Functions.

Toolbar

The toolbar offers the following actions:

	Create IDL Interface. Creates a new IDL interface based on the current COBOL interface: all IDL parameters are of IDL direction InOut; no IDL parameters are set to constant; for COBOL REDEFINE, the first REDEFINE path is mapped to IDL; FILLERs are suppressed according to your selection, see Step 4: Define the Extraction Settings and Start Extraction.
	Copy current IDL Interface. Creates a duplicate of the current IDL interface: all modifications such as IDL directions, suppress, selection of REDEFINE paths etc. are kept.
	Remove current IDL Interface.
	Rename current IDL Interface.
	Expand the full tree.
	Collapse the full tree.

See also Map to Multiple IDL Interfaces.

Decision Icons

The decision icons in the first column are set on COBOL data items where particular attention is needed:

This icon visualizes a COBOL REDEFINE. It is essential that you map the correct redefine path for your mapping to In, Out or InOut using the context menu. If you map a REDEFINE path, all other sibling REDEFINE paths are automatically set to "Suppress".

Mapping Icons

The following mapping icons on the COBOL data items indicate your current IDL mapping:

	Scalar parameter, mapped to In.
	Scalar parameter, mapped to InOut.
	Scalar parameter, mapped to Out.
	Group parameter, here mapped to InOut.
	REDEFINE parameter, here mapped to InOut.
	Parameter set to Constant.

Mapping Buttons

The following buttons are available:

Map to In | Out | InOut ->

See Map to In, Out, InOut. A suppressed COBOL data item becomes visible in the IDL interface. Used also to select another REDEFINE path.

Suppress

See Suppress Unneeded COBOL Data Items.

Set Constant...

See Set COBOL Data Items to Constants.

IDL Interface

If you have mapped the COBOL interface to multiple IDL interfaces, select the IDL interface by choosing the tabs. In the IDL Interface tree view, a context menu is also available with the following possibilities:

• Rename

• Remove from COBOL Interface. This also removes the mapped IDL parameter from all IDL interfaces for the current COBOL program. See COBOL Program Selection above.

Mapping Editor IDL Interface Mapping Functions

This section covers the following topics:

• Map to In, Out, InOut

• Map OCCURS DEPENDING ON

• Map to Multiple IDL Interfaces

• Select REDEFINE Paths

• Suppress Unneeded COBOL Data Items

• Set COBOL Data Items to Constants

Map to In, Out, InOut

With the Map to In, Out, InOut functions you make a COBOL data item visible as an IDL parameter in the IDL interface. With correct IDL directions you design the IDL interface by defining input and output parameters. COBOL programs have no parameter directions, so you need to set IDL directions manually.

To provide IDL directions

• Go step-by-step through all top-level COBOL data items in the COBOL interface and use the Map to In, Out and InOut functions available in the context menu of the COBOL interface and as mapping buttons to make the COBOL data items visible and provide IDL directions in the IDL interface:

  

Notes:

1. If a top-level COBOL group is mapped, the IDL direction is inherited by all subordinate COBOL data items and thus to the related IDL parameters in the IDL interface.
2. Subordinate COBOL data items can only be mapped to the same IDL direction as their top-level COBOL group data item.
3. With the inverse function Suppress Unneeded COBOL Data Items (see below) available in the context menu of the COBOL interface and as mapping button, a COBOL data item can be removed from the IDL interface.
4. IDL directions are described in the direction-attribute in attribute-list under Software AG IDL Grammar.

If you are using an RPC server such as the z/OS (CICS | Batch), z/VSE (CICS | Batch), Micro Focus or BS2000/OSD RPC server, the amount of data to be transferred to/from the RPC client is reduced with correct IDL directions.

Map OCCURS DEPENDING ON

With the Map to In, Out, InOut functions you can make the COBOL ODO subject (here COBOL data item TABLE) of a variable-sized COBOL table (see COBOL Tables with Variable Size - DEPENDING ON Clause) visible as an IDL unbounded group (with maximum). The ODO object (here COBOL data item COUNTER-1) is suppressed and therefore not part of the IDL interface. This is because the number of elements of the IDL unbounded group is already implicitly available. See the following example:

01 COUNTER-1 PIC 99.
01 TABLE OCCURS 1 TO 10 DEPENDING ON COUNTER-1
 02 FIELD1 PIC XX.
 02 FIELD2 PIC 99.

To map OCCURS DEPENDING ON

1. Add the COBOL ODO subject (here data item TABLE) and ODO object (here data item COUNTER-1) to the COBOL interface. It is important both data items are in the COBOL interface.

2. Use the Map to In, Out and InOut functions available in the context menu of the COBOL interface and as mapping buttons and apply IDL directions for the ODO subject (data item TABLE):

   

Notes:

1. The ODO subject can be mapped to the IDL interface.
2. The ODO object is always suppressed, but is required to be part of the COBOL interface.
3. IDL directions are described in the direction-attribute in attribute-list under Software AG IDL Grammar.

Map to Multiple IDL Interfaces

Assume the COBOL server program provides multiple functions or operations, in the following example ADD, SUBRACT, MULTIPLY. Some dispatcher front-end code executes the correct function, for example, depending on a function-code or operation-code parameter:

This example is described in more detail under Example 1: COBOL Server with Multiple Functions.

If you have such a situation, a good approach is to expose each COBOL server program function separately as an IDL program. This gives advantages in further processing of the IDL and COBOL mapping files (SVM and CVM). For example:

• If your target endpoint is a web service: instead having a Web service with a single operation, you get a web service with multiple operation, one operation for each COBOL function.

• If your target endpoint is Java or .NET: instead having a class with a single method, you get a class with multiple methods, one method for each COBOL function.

To map a COBOL interface to multiple IDL interfaces

1. Select the tab with COBOL to IDL Mapping. For each function, define a separate IDL interface with the toolbar functions or :

   

2. Give the IDL interfaces meaningful names with the toolbar function :

   

3. Define the required constant values to the function-code or operation-code parameter, see Set COBOL Data Items to Constants above:

   

For the delivered Example 1: COBOL Server with Multiple Functions:

• First, for step 1 above: Extract and define 3 separate IDL programs ADD, SUBTRACT, MULTIPLY.

• Second, for step 2 above: Rename them to suitabable names, e.g. 'ADD', 'SUBTRACT', MULTIPLY'

• Third, for step 3 above: Define the constants '+', '-' and '*' to the parameter OPERATION respectively.

• After pressing Finish, the following IDL together with a server mapping file is created. See Server Mapping Files for COBOL.

  library 'EXAMPLE' is
  
   program 'ADD' is
    define data parameter
     1 OPERAND1 (I4) In
     1 OPERAND2 (I4) In
     1 FUNCTION-RESULT (I4) Out
    end-define
  
   program 'SUBTRACT' is
    define data parameter
     1 OPERAND1 (I4) In
     1 OPERAND2 (I4) In
     1 FUNCTION-RESULT (I4) Out
    end-define
  
   program 'MULTIPLY' is
    define data parameter
     1 OPERAND1 (I4) In
     1 OPERAND2 (I4) In
     1 FUNCTION-RESULT (I4) Out
    end-define
  

Notes:

1. The following functions are offered to create further mappings from the COBOL interface, resulting in multiple IDL interfaces (IDL programs).

   Icon	Function	Description
   	Create IDL Interface	Creates a new IDL interface based on the current COBOL interface. All IDL parameters are of IDL direction InOut; no IDL parameters are set to constant; for COBOL REDEFINE, the first REDEFINE path is mapped to IDL; FILLERs are suppressed according to your selection, see Step 4: Define the Extraction Settings and Start Extraction.
   	Copy current IDL Interface	Creates a duplicate of current IDL interface. All modifications such as IDL directions, suppress, selection of REDEFINE paths etc. are kept.
   	Rename current IDL Interface	The default name for the IDL interface is based on the COBOL program name plus appended number. With this function you can give the IDL interface a suitable name.
   	Remove current IDL Interface	Deletes the current IDL interface.

2. With the steps 1 thru 3 described here you can emulate the behavior of function Map to Operation of EntireX version 9.6 and earlier.

Select REDEFINE Paths

For COBOL server programs containing COBOL REDEFINEs, the correct REDEFINE path needs to be chosen for the IDL interface.

To select redefine paths

• Use the Map to In, Out or InOut functions available in the context menu of the COBOL interface and as mapping buttons to make the COBOL REDEFINE path available in the IDL interface.

  

  Begin with the COBOL REDEFINE defined at the highest level first. Work through all inner COBOL REDEFINE data items, going from higher levels to lower levels.

Notes:

1. Only one REDEFINE path of a COBOL REDEFINE can be mapped to the IDL interface. All COBOL REDEFINE siblings are suppressed.
2. If a REDEFINE path is actively mapped to the IDL interface, all COBOL REDEFINE siblings are suppressed.
3. You can suppress all REDEFINE paths of a COBOL REDEFINE. Simply suppress the active REDEFINE path, see Suppress Unneeded COBOL Data Items above.

Suppress Unneeded COBOL Data Items

COBOL data items without any relevant information can be made invisible in the IDL interface. The IDL interface is simplified - it becomes shorter and tidier. This is useful, for example

• for FILLER data items

• if the RPC client or Adapter Service does not need an Out parameter

• if the RPC server or Adapter Service does not need an In parameter and a low value can be provided

If you are using an RPC server such as the z/OS (CICS | Batch), z/VSE (CICS | Batch), Micro Focus or BS2000/OSD RPC server, the amount of data to be transferred to/from the RPC client is also reduced.

To suppress unneeded COBOL data items

• Use the Suppress function available in the context menu of the COBOL interface and as mapping button to make the COBOL data item invisible in the IDL interface:

  

Notes:

1. The COBOL data item is not part of the IDL interface. It is invisible for RPC clients or Adapter Service.
2. The RPC server or Adapter Service provides the COBOL data item to your COBOL server with low value, managing the offset to the next COBOL data item.
3. If a COBOL group is suppressed, all subordinate COBOL data items are suppressed as well.
4. With the inverse functions Map to In, Out or InOut (see above) available in the context menu of the COBOL interface and as mapping buttons, a COBOL data item is made visible in the IDL interface again.

Set COBOL Data Items to Constants

COBOL data items that always require fixed constant values on input to the COBOL server program can be made invisible in the IDL interface and initialized with the required constant values. This is useful for keeping the IDL interface short and tidy. RPC clients or Adapter Services are not bothered with IDL parameters that always contain constants, such as RECORD-TYPES. This function is often used in conjunction with Map to Multiple IDL Interfaces (see above).

To COBOL data items to constants

1. Use the Set Constant function available in the context menu of the COBOL interface and as mapping button to define a constant value for a COBOL data item:

   

2. You are prompted with a window to enter the constant value:

   

Notes:

1. The COBOL data item is not part of the IDL interface. It is invisible for RPC clients or Adapter Services.
2. The RPC server or Adapter Service provides the defined constant in the COBOL data item to your COBOL server.
3. With the functions Map to In, Out, InOut (see above) available in the context menu of the COBOL interface and as mapping buttons, a COBOL data item can be made visible in the IDL interface again.

Programming Techniques

• Example 1: COBOL Server with Multiple Functions

Example 1: COBOL Server with Multiple Functions

Assume a COBOL server program has a FUNCTION or OPERATION code COBOL data item in its COBOL interface. The COBOL server program behaves differently depending on field values of this data item. See the following example where a COBOL programs implements a calculator with the functions ADD, SUBTRACT, MULTIPLY, etc. The execution of the different functions is controlled by the COBOL data item OPERATION:

. . .

     01 OPERATION                      PIC X(1).
     01 OPERAND1                       PIC S9(9) BINARY.
     01 OPERAND2                       PIC S9(9) BINARY.
     01 FUNCTION-RESULT                PIC S9(9) BINARY.
     . . .
     MOVE 0 TO FUNCTION-RESULT.
     EVALUATE OPERATION
         WHEN "+"
            ADD OPERAND1 OPERAND2
            GIVING FUNCTION-RESULT
         WHEN "-"
            SUBTRACT OPERAND2 FROM OPERAND1
            GIVING FUNCTION-RESULT
         WHEN "*"
            MULTIPLY OPERAND1 BY OPERAND2
            GIVING FUNCTION-RESULT
         WHEN . . .

     END-EVALUATE.
. . .

You can expose each COBOL server program function separately. The advantages or reasons for wanting this depend on the target endpoint. For example:

• Web Service
  Instead having a Web service with a single operation, you want a web service with multiple operations, one operation for each COBOL function.

• Java or .NET
  Instead having a class with a single method, you want a class with multiple methods, one method for each COBOL function.

• etc.

To do this you need to extract the COBOL server program as described under Map to Multiple IDL Interfaces.