EntireX Version 9.7
 —  EntireX .NET Wrapper  —

Software AG IDL to .NET Mapping

This document covers the following topics:


Mapping IDL Data Types to .NET Data Types

The table below lists the metasymbols and informal terms that are used for the Software AG IDL.

Software AG IDL Description .NET Data Types Note
A1 Alphanumeric char or String/StringBuilder 1, 5
Anumber Alphanumeric String/StringBuilder 1
AV Alphanumeric variable length String/StringBuilder 1
AV[number] Alphanumeric variable length with maximum length String/StringBuilder 1
B1 Binary byte or byte[] 6
Bnumber Binary byte[]  
BV Binary variable length byte[] 2
BV[number] Binary variable length with maximum length byte[]  
D Date DateTime 3, 7
F4 Floating point (small) float  
F8 Floating point (large) double  
I1 Integer (small) sbyte  
I2 Integer (medium) short  
I4 Integer (large) int  
Knumber Kanji String/StringBuilder 1
KV Kanji variable length String/StringBuilder 1
KV[number] Kanji variable length with maximum length String/StringBuilder 1
L Logical bool  
Nnumber1[.number2] Unpacked decimal BigNumeric 9,10
decimal 8,10
NUnumber1[.number2] Unpacked decimal unsigned BigNumeric 9,10
decimal 8,10
Pnumber1[.number2] Packed decimal BigNumeric 9,10
decimal 8,10
PUnumber1[.number2] Packed decimal unsigned BigNumeric 9,10
decimal 8,10
T Time DateTime 4,7

Notes:

  1. System.String for direction in, otherwise System.Text.StringBuilder if Default is used for parameter ATOSTRING. If String is used for ATOSTRING, System.String is used everywhere, and if StringBuilder is used for ATOSTRING, System.Text.StringBuilder is used everywhere. See Using the .NET Wrapper.

  2. Unsigned integer ranging from 0 to 255.

  3. Count of days AD (anno domini, after the birth of Christ). The valid range is from 1.1.0001 up to 28.11.2737 (only the date part of DateTime is used).

  4. Count of tenths of a second AD (Anno Domini, after the birth of Christ). The valid range is from 1.1.0001 00:00:00.0 up to 16.11.3168 09:46:39 plus 0.9 seconds.

  5. If -D A1TOCHAR=1 is defined in the erxidl call, A1 is mapped to char, otherwise to String/StringBuilder.

  6. If -D B1TOBYTE=1 is defined in the erxidl call, B1 is mapped to byte, otherwise to byte[].

  7. The Natural DATE type allows for the value 01.01.0000 to denote an undefined date. In order to avoid the .NET runtime throwing an exception when attempting to assign the invalid date value 01.01.0000 to a .NET DateTime variable, the .NET runtime converts an incoming neutral date/time value 01.01.0000 00:00:00.0 into the special .NET DateTime value DateTime.MaxValue - 1 tick (that is 31.12.9999:23:59:59.9999998). When this value is passed to the EntireX runtime to be sent to an EntireX RPC service, it is converted back into the neutral RPC date/time value 01.01.0000 00:00:00.0.

  8. If the total number of digits (number1+number2) is equal to or lower than 28, mapping is to the .NET data type decimal.
  9. If the total number of digits (number1+number2) is greater than 28, mapping is to the .NET class BigNumeric. See BigNumeric under .NET Wrapper Reference.
  10. If you connect two endpoints, the total number of digits used must be lower or equal than the maxima of both endpoints. For the supported total number of digits for endpoints, see the notes under data types N, NU, P and PU in section Mapping IDL Data Types to target language environment C | CL | COBOL | DCOM | .NET | Java | Natural | PL/I | RPG | XML.

Please also note the hints and restrictions on the IDL data types valid for all programming language bindings as described under IDL Data Types.

Top of page

Mapping Library Name and Alias

The library name as specified in the IDL file is sent from a client to the server. Special characters are not replaced. The library alias is not sent to the server.

In the RPC server, the IDL library name sent may be used to locate the target server. See Locating and Calling the Target Server under z/OS (CICS, Batch, IMS) | UNIX | Windows | Micro Focus | BS2000/OSD | z/VSE (CICS, Batch) | IBM i.

The name of the .NET server assembly must match the library name.

The library name as given in the IDL file is used to compose the names of the generated output files. See library-definition under Software AG IDL Grammar. Therefore the allowed characters are restricted by the underlying file system. The name is composed from <library-name>.idl to <library-name>.cs as default. The name of the client stub file can be changed by using the -F option of the erxidl command. See Using the .NET Wrapper in IDL Compiler Command-line Mode.

In accordance with the C# conventions, the class name is built as follows with the default setting -PSANITIZE:

Other special characters used in the library name are not changed and may lead to problems with your underlying file system and to compile errors.

If there is an alias for the library name in the library-definition, this alias is used "as is" to form the class name. Therefore, this alias must be a valid C# class name. To fully control the output, use alias names and do not use SANITIZE.

Examples:

MY-CLASS to MyClass (class)

MY-CLASS alias YOUR_CLASS to YOUR_CLASS(class)

Top of page

Mapping Program Name and Alias

The program name is sent from a client to the server. Special characters are not replaced. The program alias is not sent to the server.

In the RPC server, the IDL program name sent is used to locate the target server. See Locating and Calling the Target Server under z/OS (CICS, Batch, IMS) | UNIX | Windows | Micro Focus | BS2000/OSD | z/VSE (CICS, Batch) | IBM i.

The program names as given in the IDL file are mapped to methods within the generated C# sources. See program-definition under Software AG IDL Grammar.

In accordance with the C# conventions method names are built as follows with the default setting -PSANITIZE:

Other special characters used in the program name are not changed and may lead to compile errors.

If there is an alias for the program name in the program-definition, this alias is used "as is" for the method name. Therefore, this alias must be a valid C# method name. To fully control the output, use alias names and do not use SANITIZE.

Examples:

MY-PROGRAM to MyProgram (method).

MY-PROGRAM alias YOUR_PROGRAM to YOUR_PROGRAM(method).

Top of page

Mapping Parameter Names

The parameter names as given in the parameter-data-definition of the IDL file are mapped to parameters of the generated C# methods.

In accordance with the C# conventions the parameter names are built as follows with the default setting -PSANITIZE:

IDL files that use C# keywords (e.g. string or float) as parameter names are not supported. Do not use C# keywords such as string or float as parameter names. Modify your IDL file accordingly.

To fully control the output do not use SANITIZE.

Example:

MY-PARAM to myParam (parameter)

Top of page

Mapping Fixed and Unbounded Arrays

Arrays in the IDL file are mapped to C# arrays. If an array value does not have the correct number of dimensions or elements, this will result in an exception. If the value null (null pointer) is used as an input parameter (for IN and INOUT parameters), an array will be instantiated by the runtime.

Top of page

Mapping Groups and Periodic Groups

Groups in the IDL file are mapped to C# classes.

The namespace for group classes is SoftwareAG.EntireX.NETWrapper.Generated.filename.Groups on the client side, and SoftwareAG.EntireX.NETWrapper.Server.libraryname.Groups on the server side.

Top of page

Mapping Structures

Structures in the IDL file are mapped to C# classes.

The namespace for structure classes is SoftwareAG.EntireX.NETWrapper.Generated.filename.Structs on the client side, and SoftwareAG.EntireX.NETWrapper.Server.libraryname.Structs on the server side.

See Mapping Groups and Periodic Groups.

Top of page

Mapping the Direction Attributes In, Out, InOut

Note that only the direction information of the top-level fields (level 1) is relevant. Group fields always inherit the specification from their parent. A different specification is ignored.

See attribute-list under Software AG IDL Grammar for the syntax on how to describe attributes within the IDL file and refer to the direction attribute.

Top of page

Mapping the ALIGNED Attribute

Not supported.

Top of page

Calling Servers as Procedures or Functions

The IDL syntax allows definitions of procedures only. It does not have the concept of a function. A function is a procedure which, in addition to the parameters, returns a value. Procedures and functions are transparent between clients and server, i.e. a client using a function can call a server implemented as a procedure and vice versa.

In C# a procedure corresponds to a method with result type void, a function returns a value of some type.

It is possible to treat an OUT parameter of a procedure as the return value of a function. The .NET Wrapper generates a method with a non-void result type when the following two conditions are met:

In this case no function parameter is generated for this OUT parameter.

See the .NET Wrapper example that comes with EntireX.

Top of page