Message Class ETBM - Broker Log and Console - Informational Messages

An Attach Manager is registered for this service, but could not be instructed to start a new replica. This might happen occasionally due to synchronization problems.

If this error happens only rarely, do not worry about it. If it happens more often, or even prevents your automatic startup system from working correctly, contact Software AG support.

During broker startup, configuration file parameters have been successfully processed for the correct syntax.

This message is for information purposes only.

During startup, the broker kernel loads the kernel security module.

• If the USRSEC module was not loaded successfully from the location specified by the SECURITY-PATH parameter, the following output is displayed (SECURITY-PATH applies only to UNIX and Windows):

ETBM0079 User Security Exit processing started

ETBD0286 Diagnostic Values:

• ErrorText: The specified module could not be found.

• ExitName: C:/temp/usrsec.[dll | so | sh ]

• EntryPoint: usrsec

• If the SECURITY-PATH parameter is omitted, the following output is displayed (SECURITY-PATH applies only to UNIX and Windows):

ETBD0286 Diagnostic Values:

• ErrorText: The specified module could not be found.

• ExitName

• EntryPoint: usrsec

• If USRSEC is loaded successfully, the following output is displayed: ETBM0079 Loading kernel security module

• This output is followed imediately by one of the following informational messages:

  • Where EntireX security is being used (all platforms):

    MAI/SECINIT 2004-07-30 02:03:26.432 ETBD0286 Diagnostic Values: Kernel security module loaded... EntireX Security

  • Where lightweight security is being used (z/OS only):

    MAI/SECINIT 2004-07-30 02:03:26.432 ETBD0286 Diagnostic Values: Kernel security module loaded... USRSEC Light

  • Where user-written security is being used (all platforms):

    MAI/SECINIT 2004-07-30 02:03:26.432 ETBD0286 Diagnostic Values Kernel security module loaded... User-written USRSEC

This message is for information purposes only.

The shortage for NUM-SHORT-BUFFER is solved. Short buffers are available again.

None.

This message is issued at broker startup time.

This message is for information purposes only.

The Broker startup procedure has begun.

This message is for information purposes only.

During startup, the Broker is reading the resource definitions in the DEFAULTS=BROKER section of the attribute file.

This message is for information purposes only.

During startup, the Broker read the attribute file correctly and is now obtaining storage for the resources as defined in the DEFAULTS=BROKER section of the file.

This message is for information purposes only.

During startup, the Broker has read the attribute file correctly and obtained the storage needed from the operating system. The Broker is now initializing the internal structures.

This message is for information purposes only.

EntireX Broker has shut down, either by shutdown request from the console operator or by an abnormal end.

This message is for information purposes only.

During startup, the Broker has read the attribute file, obtained the storage needed from the operating system, initialized the internal structures, entered the dispatcher and started the COM task correctly. This message is issued before any worker task is started.

This message is for information purposes only.

During startup, the Broker has read the attribute file, obtained the storage needed from the operating system, initialized the internal structures, entered the dispatcher and started the COM task and at least one worker task correctly. This message is issued before the TOM task is started.

This message is for information purposes only.

During startup, the Broker has read the attribute file, obtained the storage needed from the operating system, initialized the internal structures, entered the dispatcher and started the COM task and at least one worker task correctly. This message is issued before the COM task is started.

This message is for information purposes only.

During Broker startup, a Receive Task for lightweight or compatibility communication has started successfully. This message is issued for every Receive Task.

This message is for information purposes only.

The COM task has detected a shutdown request for EntireX Broker. The COM task will shut down immediately.

This message is for information purposes only.

The TOM task has detected a shutdown request for EntireX Broker. The TOM task will shut down immediately.

This message is informational only.

A Receive task has detected the shutdown request and will stop soon. This message is issued from every Receive task.

This message is for information purposes only.

The EntireX Broker buffer manager could not allocate enough memory for the Reply buffer. The value of startup parameter NUM-COMBUF is responsible for the maximum buffer size.

Try the call again later. Increase the value NUM-COMBUF if the error occurs frequently.

The Broker COM task has started successfully.

This message is for information purposes only.

The Broker TOM task has started successfully.

This message is for information purposes only.

This message is issued for each worker task that is started successfully.

This message is for information purposes only.

A worker task has detected the shutdown request for EntireX Broker and will stop soon. This message is issued from every worker task.

This message is for information purposes only.

The EntireX Broker engine has received "Ready for work" from the Dispatcher and the Dispatcher is active. Notation vrsnn represents the version, release, SM and patch level (for example 61102 if patch 2 is installed).

This message is for information purposes only.

During broker startup, this message shows specific module maintenance information (<1> module name, <2> date, <3> time, <4> version maintenance level, <5> entry point, <6> length, <7> load point).

This message is for information purposes only.

All tasks and resources of EntireX Broker are established. The main process waits until the activated processes are finished.

This message is for information purposes only.

The Communicator nucleus has established all processes and resources for the Communicator instances (Receive and Reply tasks).The nucleus returns to the EntireX Broker main task successfully.

This message is for information purposes only.

The Communicator nucleus is creating the Reply process. The Reply task is needed to return data from EntireX Broker to the user.

This message is for information purposes only.

The Communicator nucleus is creating the Receive process. The Receive task is needed to get data from the user and send it to EntireX Broker.

This message is for information purposes only.

The EntireX Broker dispatcher has detected a shutdown request and will initiate Broker shutdown immediately by informing all worker tasks and the COM task to terminate. Only calls to the Broker that have already been dispatched to the worker tasks will be completed. New calls to the Broker or calls in the Broker input queue will not be processed.

This message is for information purposes only.

The Broker kernel has received a valid command. The command is logged for statistical purposes.

None.

Shutdown has been requested and the associated indication has been detected.

None.

An MCI command was issued by the ETBOPR utility. This message provides the command received from EntireX Broker. The command is executed immediately after this message.

This message is for information purposes only.

During Broker startup, a Reply task for lightweight or compatibility communication has started successfully. This message is issued for each Reply task started.

This message is for information purposes only.

A Reply task has finished its work. This message is issued from every reply task.

This message is for information purposes only.

The value of the MAX-UOWS setting for the server exceeds the value of the MAX-UOWS setting for the Broker.

None. This message is for information purposes only. The server's MAX-UOWS value will be reset automatically to the MAX-UOWS value for the Broker.

The EntireX license will never expire.

This message is informational only.

On BS2000/OSD and z/OS, the license check has detected errors. However, these errors will be ignored. Subsequent product-specific license checks may cause a Broker shutdown.

This message is for information purposes only.

The Broker could not initialize Entire Conversion Services (ECS) which are needed if any server definition in the Broker attribute file specifies the CONVERSION parameter. The Broker continues initialization despite the ECS failure.

Make sure that the Broker knows where the ECS object files are located. For UNIX, this means that environment variable ECSOBJDIR is defined and contains the name of a directory containing the ECS object files (*.edo and *.pto files). For z/OS, this means that the DDECSOJ DD statement points to the EXX ECS library included on the EntireX installation medium. If the problem remains, contact Software AG support.

Broker was unable to initialize the ICU converter.

None.

The XCOM Communicator could not be started.

See the previous error message in the log and correct this problem.

A required library is missing or invalid.

A subsequent error message will provide more information.

TRANSPORT=NET has been specified in the Broker attribute file, and the Entire Net-Work component XTI.DLL is missing or invalid. The Entire Net-Work communicator will be disabled.

If the Entire Net-Work transport is required, install the Entire Net-Work product.

A configuration file (for instance the Broker attribute file) contains an attribute which is no longer supported.

Edit the configuration file to either delete the obsolete attribute or comment out the attribute.

Broker attribute file contains an attribute that is not valid on this platform.

Edit the attribute file to either delete or comment out the invalid attribute.

There was an error in creating a file to write accounting records. Accounting will be disabled and broker will continue to initialize.

Check broker log file for more details.

Broker has successfully created/opened the accounting file. Name of the accounting file follows this message.

The persistent store framework was successfully initialized.

None.

The persistent store was successfully opened for restore processing.

None.

Broker reports the progress of the restore procedure in steps of 1,000 units of work. Another 1,000 units of work have been successfully restored.

None.

Broker detected an entry corresponding to a reserved internal service name in the broker attribute file.

Remove the offending service definition from the attribute file.

The receiver task of the NET transport detected an unsupported Adabas command. This command will be rejected with error response 02150022. See Adabas Messages and Codes for response code 22. The Adabas client used the database ID of EntireX by mistake.

No action necessary.

The receiver task of the NET transport detected a wrong Adabas file number in the Adabas control block. This command will be rejected with error response 02150017. See Adabas Messages and Codes for response code 17. The Adabas client used the database ID of EntireX and a wrong file number by mistake.

No action necessary.

The Transport layer initialized properly and is ready for communications. All supported transports will issue this message on success.

Informational message only.

The Communicator of the Transport layer is started. All supported transports will issue this message on startup.

Informational message only.

The Communicator of the Transport layer is stopped. All supported transports will issue this message before termination.

Check the log file for error messages. Ignore this message if shutdown was requested.

One nucleus of the Transport layer is started. All supported transports will issue this message on startup.

Informational message only.

One nucleus of the Transport layer is stopped. All supported transports will issue this message before termination.

Check the log file for error messages. Ignore this message if shutdown was requested.

The Communicator starts to initialize the transport layer. All supported transports will issue this message on startup.

Informational message only.

The Communicator initialized the transport layer successfully. All supported transports may issue this message.

Informational message only.

The Communication Manager detected the termination of the Communicator. According to the transport-specific response code, it is possible to restart this transport layer again, but it might be forbidden due to the transport-specific attribute file definitions.

Informational message only.

The Communication Manager detected the termination of the Communicator. According to the transport-specific attribute file definitions, it is permitted to run the restart section of the Communication Manager to try to reestablish this specific transport layer.

Informational message only.

The operator command interface echoes the incoming command request.

Informational message only.

The operator command interface echoes the incoming command request.

Informational message only.

The operator command interface echoes the incoming command request. The EntireX will shutdown.

Informational message only.

Operator command RESET has been issued to reset the security context for the specified user ID :1:. The command has been successfully performed.

None.

Operator command DSECSTAT has been issued to display the Security statistics providing the number of successful and failed Security authentications and Security authorizations. The command has been successfully performed.

None.

Operator command DSTAT has been issued to display the EntireX Broker statistics providing the total number, the number of active elements, and an optional high watermark for services, clients, servers, conversations, message buffers, topics, publishers, subscribers, and publications. The command has been successfully performed.

None.

Operator command DRES has been issued to display the broker's resource usage for conversations, message buffers, participants, services, topics, the timeout queue, units of work, and the work queue. Usage provides the total number, the number of free elements, and the number of used elements. The command has been successfully performed.

None.

Indicates the end of the console output.

None.

Since transport-specific sections have been introduced, the global attribute is considered redundant information. This message informs about details of the attribute processing.

Delete the reported global attribute. It is no longer necessary.

Since transport-specific sections have been introduced, the global attribute is no longer necessary. The transport-specific attribute should be used instead.

Delete the reported global attribute and specify the transport-specific attribute instead.

The transport proxy has been successfully started.

None.

The transport proxy has been stopped.

None.

The specified command log output file has been opened.

This message is for informational purposes only.

The specified command log output file has been closed.

This message is for informational purposes only.

EntireX licensing data is displayed.

None.

The license check has been finished without detecting an error.

This message is for information purposes only.

This message provides the response to operator command DPOOL.

No action required.

Broker was unable to create the initial set of memory pools with the existing configuration and will attempt to repeat with an emergency configuration.

No action required.

On UNIX and Windows, the broker sent a broadcast message to ETBSRV.

None.

On UNIX and Windows, the broker is going to send a broadcast message to ETBSRV.

None.

Broker received command :1: from the operator console.

None.

The Load Broker finished the PSTORE migration successfully.

None.

The Unload Broker finished the PSTORE migration successfully.

None.

The Unload Broker started the PSTORE migration.

None.

The Unload Broker stopped the PSTORE migration.

None.

The Load Broker started the PSTORE migration.

None.

The Load Broker stopped the PSTORE migration.

None.

The broker is running in RUN-MODE=ADMIN.

None.

The broker is running in RUN-MODE=STANDARD. This is the default mode.

None.

The broker is running in RUN-MODE=STANDBY.

None.

The broker is running in RUN-MODE=PROXY.

None.

The broker is running in RUN-MODE=PSTORE-LOAD.

None.

The broker is running in RUN-MODE=PSTORE-UNLOAD.

None.

The Standby Broker successfully performed the takeover sequence. It will change to RUN-MODE=STANDARD.

None.

Broker is ready.

None.

Standby Broker will check the status of the Standard Broker.

None.

Standby Broker was checking the status of the Standard Broker. The Standard Broker responded to Standby Broker's request. Standard Broker is up and running.

None.

The Standby Broker is starting the takeover sequence to restore the persistent store data of the Standard Broker in its own address space.

None.

The Standby Broker is stopping the takeover sequence.

None.

The value of attribute TRACE-LEVEL was changed by operator command.

None.

The value of attribute TRAP-ERROR was changed by operator command.

None.