Version 9.6
 —  Installation under IBM i  —

Installing the EntireX RPC Server under IBM i

The EntireX RPC Server under IBM i enables you to call programs as servers, using ILE (Integrated Language Environment).

Note:
The EntireX RPC server installation also includes sample programs that demonstrate how to build and use an RPC client environment on IBM i. For details, see Installation Verification and Using the COBOL Wrapper.

This document describes how to install the RPC server under IBM i.

It covers the following topics:

See Platform Coverage for full platform information.

Prerequisites for installing the RPC server are described centrally. See IBM i Prerequisites.

The implementation under IBM i is based on the UNIX code, therefore, use the UNIX parameters for the IBM i environment, see Setting up Broker Instances. However, some features provided under UNIX are not supported under IBM i, see Features Currently not Supported.


Features Currently not Supported

Secure Sockets Layer (SSL) is currently not supported.

Top of page

Installation Steps

Note:
vrsp stands for the current version, release, service pack, and optionally a patch level.

Installation comprises the following steps:

Step 1: Check the Product Library

A successful Broker ACI installation on your IBM i machine is a prerequisite to install the RPC server. Software AG recommends you to keep the RPC server environment in the library EXX, in which your Broker ACI was installed.

If this library does not yet exist, create it with the command CRTLIB EXX.

Step 2: Copy the Installation Kit to Disk

The product is delivered in a data set with the name ../OS400/EXPvrsp on your EntireX installation DVD.

Start of instruction setTo copy the installation file to your IBM i disk

  1. Use the command CRTSAVF to create an empty IBM i *SAVF file, named EXP vrsp, on your IBM i machine in a library of your choice.

  2. Use FTP to transfer the unzipped PC file EXP vrsp to the corresponding IBM i save file using the FTP option "binary".

Step 3: Verify the Contents of the *SAVF File

Start of instruction setTo verify the contents of the *SAVF file EXPvrsp

Object Type Description
XSERVER *PGM RPC server program.
STR_RPCSRV *PGM Sample RPC server starting procedure.
EXPCRTLOG *PGM Sample procedure to create the physical log file.
EXPRUNTIME *SRVPGM RPC server runtime module.
EXPMSG *MSG EntireX Messages.
H_EXP *FILE (PF-SRC) Header include files for sample C programs. Rename to H before use.
QCLSRC *FILE (PF-SRC)
Sources of build procedures .
Member Description
SERVER_CFG RPC server configuration to be used by the server startup procedure.
STR_RPCSRV Sample procedure to submit/start an RPC server.
EXPCRTLOG Procedure to create the physical log file.
EXAMPLE *SAVF Save file containing RPC server and RPC client examples.

Step 4: Restore the *SAVF File

Start of instruction setTo restore the *SAVF file

RSTLIB SAVLIB(EXPvrsp) DEV(*SAVF) SAVF(yoursavlib/EXPvrsp) RSTLIB(EXX)

where yoursavlib denotes the library into which you transferred the save file during Step 2.

In addition to the Broker ACI installation, the product library EXX should now contain the objects listed in Step 3.

Software AG recommends you not having user objects in this library. Copy modified samples to the user libraries. Source samples mentioned here may change, therefore check all associated program objects for the latest version.

The EntireX RPC server for IBM i is now installed and ready to use.

Top of page

Installation Verification

The verification is based on the EntireX RPC calculation example CALC in the IDL file example.idl, which is common for all platforms. The IBM i library EXAMPLE provides programs that allow you to test a COBOL RPC client and to run the RPC server with a COBOL or a C application service.

The verification comprises the following steps:

Note:
RPG source examples are currently not provided for the installation verification.

Prerequisite for all verifications:

The service program EXA (type *SRVPGM, the Broker ACI/stub) must be available in your library list. You can accomplish this task by adding EXX, where the Broker ACI and the RPC server are usually installed, to your library list.

Step 1: Restore the EXAMPLE Library

Before you can begin the verification, you must restore the IBM i library EXAMPLE from the save file EXAMPLE that you downloaded to library EXX during Step 3.

To restore the *SAVF example file, use the command RSTLIB:

RSTLIB SAVLIB(EXAMPLE) DEV(*SAVF) SAVF(EXX/EXAMPLE) RSTLIB(EXAMPLE)

The newly created library EXAMPLE should contain the following objects:

Object Type Used by example Description
CALC *PGM COBOL server, see Step 3: Verify the RPC Server using COBOL COBOL server calculation engine (created with BIND_CALC).
CALC_RPG *PGM RPC server RPG Server calculation engine (created with BIND_RCALC).
CALCCLIENT *PGM COBOL client, see Step 2: Verify the RPC COBOL Client COBOL client calculation dialog (created with BINDCCALC).
Contains the modules CCALCMAIN, CCALCMENU, CCALC and RPCSRVI.
CRT_CBLMOD *PGM all COBOL Procedure to compile/create COBOL modules.
CRT_C_SRV *PGM all C Procedure to create modules and service programs of DEXAMPLE and EXAMPLE for the C Server.
BIND_CALC *PGM COBOL server, see Step 3: Verify the RPC Server using COBOL Procedure to compile and bind the COBOL server.
BIND_CCALC *PGM COBOL client, see Step 2: Verify the RPC COBOL Client Procedure to compile and bind the COBOL client.
BIND_RCALC *PGM RPG Server Procedure to compile and bind the RPG Server.
STR_RPCSRV *PGM all Server Procedure to start the EntireX RPC server.
X_DEXAMPLE *SRVPGM C Server, see COBOL client, see Step 4: Verify the RPC Server using C C Server generated stub service. To use it, rename to DEXAMPLE.
X_EXAMPLE *SRVPGM C Server, see COBOL client, see Step 4: Verify the RPC Server using C C Server implementation file.
This service contains the application logic of the programs CALC, HELLO and POWER. To use it, rename to EXAMPLE.
CCALCMENU *FILE (DSPF) COBOL client, see Step 2: Verify the RPC COBOL Client COBOL client dialog screen.
CALC *MODULE COBOL client, see Step 2: Verify the RPC COBOL Client COBOL server calculation engine.
QCBLLESRC *FILE (PF-SRC) all COBOL
COBOL sources for Client and Server.
Member Description
CALC COBOL server calculation engine.
CCALCMENU COBOL client display file.
CCALCMAIN COBOL client dialog program.
CCALC COBOL client stub derived from CobolClient1.tpl.
RPCSRVI COBOL client Broker Service derived from CobolClient2.tpl.
ERXCOMM RPC Communication Area copybook to be copied by CALCMAIN, CCALC and RPCSRVI.
  *FILE (PF-SRC) all
CL procedures for compiling, binding and building.
Member Description
BIND_CALC Procedure to compile and bind the COBOL server.
BIND_CCALC Procedure to compile and bind all COBOL client modules.
BIND_RCALC Procedure to compile and bind the RPG server.
CRT_C_SRV Procedure to create modules and service programs of DEXAMPLE and EXAMPLE for the C server.
CRT_CBLMOD Compile COBOL modules.
QCSRC *FILE (PF-SRC) all C
Sources for C Server.
Member Description
DEXAMPLE C server generated stub.
EXAMPLE C server implementation file.
H *FILE (PF-SRC) all C C header files. It contains the generated stub header CEXAMPLE.h.
QRPGLESRC *FILE (PF-SRC) all RPG
RPG sources for server.
Member Description
CALC_RPG RPG server calculation engine.

Step 2: Verify the RPC COBOL Client

In your EntireX network environment, the RPC server program CALC must be available for calculating figures. Examples of a CALC server program are provided in C and in COBOL. You can also access the sample CALC programs installed on your IBM i computer as described in Step 3 and Step 4 below.

Start of instruction setTo verify the COBOL client

  1. Add the sample library EXAMPLE to your library list.

  2. Call program CALCCLIENT.

    A menu similar to the following will be displayed:

    Calculator Menu                                       
    ----------------------------------------------------- 
                                                          
    Operation: + (type + - * / to calculate or 
                             type .       to terminate)   
    Operand 1:    _____                                        
                                                          
    Operand 2:    _____                                            
                                                          
    Result:  ___________                                             
                                                          
                                                          
    Broker-ID: localhost:1971    Server: SRV1
  3. Specify the ID of the remote Broker and the name of the server that provides the CALC program. Specify the figures you want to compute and press Enter. If the Broker connection fails, you will receive an appropriate error message.

The following modules/files are bound to program CALCCLIENT:

Object Description
CCALCMAIN The main program logic.
CCALCMENU The menu display file.
CCALC The client stub derived from CobolClient1.tpl.
RPCSRVI The client runtime derived from CobolClient2.tpl.
ERXCOMM RPC communication area copybook.
EXA The Broker ACI (stub).

All sources are located in the file EXAMPLE/QCBLLESRC.

Use the procedure BIND_CCALC to recompile and rebind the modules.

Note:
Program CALCCLIENT expects the server program CALC to be located in a library named EXAMPLE (as specified in the client stub CCALC). If your CALC program is located in a different library, you must adjust member EXAMPLE/QCBLLESRC(CCALC). Modify all occurrences of the string "EXAMPLE" to your library name and adapt the associated string length. Then compile and rebind the CALCCLIENT program.

Step 3: Verify the RPC Server using COBOL

To verify the RPC server under IBM i, you can use the COBOL server program CALC located in library EXAMPLE. When requested by a client process, it provides the four basic arithmetic operations addition, subtraction, multiplication and devision.

Start of instruction setTo verify the Server sample written in COBOL

  1. Edit the RPC server configuration file EXAMPLE/QCLSRC(RPCSRV_CFG).

    You must at least modify the BrokerID=Localhost:1971 of the remote Broker where you want to register your server and the ServerName=SRV1 that identifies your service.

  2. Start the procedure EXAMPLE/STR_RPCSRV. It will submit the RPC server named XSERVER to a batch queue.

    If you want to extend the SBMJOB parameters, you can modify/recompile the procedure EXAMPLE/QCLSRC(STR_RPCSRV).

    Note:
    The RPC server can only be started as a batch job for multithreading reasons. ALWMLTTHD=*YES is a very important parameter for allowing multiple threads. The configuration file RPCSRV_CFG described in the previous step will be passed to the XSERVER.

  3. Using the IBM i command WRKACTJOB, you should find a job named RPCSERVER in your active-job list. To monitor your server, you can also start the EntireX Control Center on a Windows PC. To do so, logon to the Broker that you specified in Step 1. A service named SRV1 should be listed.

  4. Use a calculator client process to send a request to your server. As remote client you can run a Java test generated from the Workbench example.idl. Or run the IBM i sample CALCCLIENT from your IBM i machine as described in Step 2: Verify the RPC COBOL Client.

    The RPC server will find and access the COBOL based sample program CALC in your library EXAMPLE and pass the computed result back to the client. Server stubs are not required for application servers written in COBOL and RPG.

    For more details on the server access logic, see Administering the EntireX RPC Server.

  5. To terminate the RPC server, select the SRV1 service on the EntireX Control Center and confirm the "Shutdown".

Step 4: Verify the RPC Server using C

Start of instruction setTo verify the server sample written in C

  1. Edit the RPC server configuration file EXAMPLE/QCLSRC(RPCSRV_CFG).

    You must at least modify the BrokerID=Localhost:1971 of the remote Broker where you want to register your server and the ServerName=SRV1 that identifies your service.

  2. Start the procedure EXAMPLE/STR_RPCSRV. It will submit the RPC server named XSERVER to a batch queue.

    If you want to extend the SBMJOB parameters, you can modify/recompile the procedure EXAMPLE/QCLSRC(STR_RPCSRV).

    Note:
    The RPC server can only be started as a batch job for multithreading reasons. ALWMLTTHD=*YES is a very important parameter for allowing multiple threads. The configuration file RPCSRV_CFG described in the previous step will be passed to the XSERVER.

  3. Using the IBM i command WRKACTJOB, you should find a job named "RPCSERVER" in your active-job list. To monitor your server, you can also start the EntireX Control Center on a Windows PC. To do so, logon to the Broker that you specified in Step 1. A service named SRV1 should be listed.

  4. Rename the C stub X_DEXAMPLE to DEXAMPLE and the C application X_EXAMPLE to EXAMPLE.

    Note:
    under IBM i, a service program of type *SRVPGM is equivalent to the UNIX term "shared library".

    For more details on the naming convention of servers and stubs written in C, see Using the C Wrapper.

  5. Use a calculator client process to send a request to your server. As remote client you can run a Java test program generated from the Workbench example.idl.

    The RPC server will search for the shared libraries Dlibrary (the server stub) and library which contains the program functions, e.g. CALC. In our sample case, library denotes EXAMPLE.

    The section Administration of the EntireX RPC Server under IBM i describes in detail how the RPC server distinguishes between a shared library and a stubless COBOL or RPG program.

  6. To terminate the RPC server, select the SRV1 service on the EntireX Control Center and confirm the "Shutdown".

Top of page