Message Class 0001 - RPC C Runtime

This page describes messages with message class 0001. These messages have the format:

0001nnnn

where 0001 is the message class and
nnnn is the message number in the range 0000 - 9999.

This message class is returned if an error has occurred in the RPC C runtime layer.

Overview of Messages

00010001 | 00010003 | 00010004 | 00010005 | 00010006 | 00010007 | 00010008 | 00010009 | 00010010 | 00010011 | 00010018 | 00010019 | 00010028 | 00010032 | 00010034 | 00010036 | 00010037 | 00010038 | 00010039 | 00010045 | 00010046 | 00010052 | 00010053 | 00010054 | 00010055 | 00010056 | 00010058 | 00010060 | 00010061 | 00010063 | 00010064 | 00010065 | 00010066 | 00010067 | 00010068 | 00010069 | 00010070 | 00010071 | 00010072 | 00010075 | 00010076 | 00010077 | 00010078 | 00010079 | 00010080 | 00010081 | 00010082 | 00010083 | 00010084 | 00010085 | 00010086 | 00010087 | 00010088 | 00010089 | 00010090 | 00010091 | 00010094 | 00010095 | 00010096 | 00010097 | 00010100 | 00010101 | 00010102 | 00010103 | 00010104 | 00010105 | 00010106 | 00010107 | 00010108 | 00010109 | 00010110 | 00010200 | 00010201 | 00010202 | 00010203 | 00010204 | 00010205 | 00010206 | 00010207 | 00010208 | 00010209 | 00010210 | 00010211 | 00010212 | 00010213 | 00010215 | 00010216 | 00010217 | 00010218 | 00010219 | 00010220

00010001 No Communication
Explanation

Denotes an inconsistency within the EntireX RPC Runtime.

Action

Contact Software AG support.


00010003 Unknown medium
Explanation

The EntireX RPC Runtime detected an invalid server address.

Action

When using the C API erx.h:
The ERX_SERVER_ADDRESS structure of the EntireX RPC Runtime is not correct or was not correctly initialized. The medium must be ERX_TM_BROKER, ERX_TM_BROKER_LIBRARY or ERX_TM_CONNECTION.


00010004 Invalid control block
Explanation

The EntireX RPC Runtime API was called with an invalid connection or CallId.

Action

When using the C API erx.h:
Check program and correct error.


00010005 Out of memory
Explanation

The operating system could not satisfy a memory request.

Action

Increase your memory resources and retry.


00010006 No more registrations
Explanation

An ERXRegister API call can register a maximum of 256 threads at a time with the EntireX RPC Runtime within one process.

Action

When using the C API erx.h:
Check program and correct error.


00010007 Already registered
Explanation

An ERXRegister API call is attempting to register a thread with the EntireX RPC Runtime twice.

Action

When using the C API erx.h: It is not necessary to register a thread multiple times. However, it is required to register a thread once. We recommend having the number of ERXRegister/ERXUnregister calls occurring in pairs. If you insist on registering a thread twice, ignore this error. Check program and correct error.


00010008 Not registered in ERX Runtime
Explanation

Before a thread/process can use an EntireX RPC Runtime API function, the thread/process must be registered with the EntireX RPC ERXRegister API call.

Action
  • When using the C API erx.h:

    Check program and correct error.

  • When using the DCOM Wrapper:

    Contact Software AG support.


00010009 Parameter error. Location of wrong parameter is n
Explanation

An EntireX RPC Runtime API function was called with an invalid address or inconsistent parameter. The number n denotes the position of the inconsistent parameter within the API.

Action

When using the C API erx.h:
Check program and correct error.


00010010 Control block not found
Explanation

An EntireX RPC Runtime API function with corrupt memory was called. The internal data structures were not found.

Action
  • When using the C API erx.h:

    Check program and correct error.

  • When using the DCOM Wrapper:

    Contact Software AG support.


00010011 Pending call
Explanation

During a conversational Remote Procedure Call there was a failure and another EntireX RPC Runtime ERXCall API call was issued.

Action

When using the C API erx.h:
Close the Connection with the EntireX ERXDisconnect API function call.


00010018 Invalid memory
Explanation

One of the following occurred:

  1. The memory area supplied for the EntireX RPC Runtime API is invalid. It could not be read from or written to.

  2. An ERX_VDATA handle is corrupt.

Action
  • When using the C API erx.h:

    Check program and correct error.

  • When using the DCOM Wrapper:

    Contact Software AG support.


00010019 Invalid Call ID
Explanation

The CallId for the EntireX RPC Runtime API function is invalid or corrupt.

Action
  • When using the C API erx.h:

    Check program and correct error.

  • When using the DCOM Wrapper:

    Contact Software AG support.


00010028 Illegal type
Explanation

The EntireX RPC Runtime API received an invalid parameter.There is an inconsistency between the template files, the header file erx.h or the EntireX RPC Runtime. The type of parameter is not supported.

Action
  • When using the C API erx.h:

    Re-generate the client proxy or server stubs with the correct template file client.tpl and server.tpl and compile and link it with the header file erx.h from the same EntireX RPC version.

  • When using the DCOM Wrapper:

    Re-generate the DCOM server, using the correct template files.


00010032 Too many indices
Explanation

The EntireX RPC Runtime API call received an invalid parameter. There is an inconsistency between the template files, the header file erx.h or the EntireX RPC Runtime.

Action

The EntireX RPC Runtime is binary backward compatible. It must have the same or a higher EntireX version as the template and header files used.

  • When using the C API erx.h:

    Re-generate the client proxy or server stubs with the correct template file client.tpl and server.tpl and compile and link it with the header file erx.h from the same EntireX RPC version.

  • When using the DCOM Wrapper:

    Re-generate the DCOM server, using the correct template files.


00010034 No pending call
Explanation

An EntireX RPC Runtime API ERXWait call was issued and no RPC request was pending.

Action

Check program and correct error.


00010036 Parameters values not ascending
Explanation

The EntireX RPC Runtime API call received an invalid parameter. There is an inconsistency between the template files, the header file erx.h or the EntireX RPC Runtime. One of the following applies:

  • The size of the first dimension of an array parameter must not be less than the size of the second dimension.

  • The size of the second dimension of an array parameter must not be less than the size of the third dimension.

Action

The EntireX RPC Runtime is binary backward compatible. It must have the same or a higher EntireX version as the template and header files used.

  • When using the C API erx.h:

    Re-generate the client proxy or server stubs with the correct template file client.tpl and server.tpl and compile and link it with the header file erx.h from the same EntireX RPC version.


00010037 Invalid timeout
Explanation

The timeout value must not be zero.

Action
  • When using the C API erx.h:

    The ERX_SERVER_ADDRESS structure of the EntireX RPC Runtime is not correct or was not correctly initialized. Check program and correct error.

  • When using the DCOM Wrapper:

    Provide a valid timeout for the property TimeOut.


00010038 Version not supported
Explanation

The EntireX RPC Runtime API ERXRegister call was issued with an invalid version.

Action

The EntireX RPC Runtime is binary backward compatible. It must have the same or a higher EntireX version as the template and header files used.

  • When using the C API erx.h:

    Use the appropriate ERX_Vnnn macro defined in the erx.h header file. Re-generate the client proxy or server stubs with the correct template file client.tpl and server.tpl and compile and link it with the header file erx.h from the same EntireX RPC version.

  • When using the DCOM Wrapper:

    Re-generate the DCOM server, using the correct template files.


00010039 Cyclic parameter
Explanation

The EntireX RPC Runtime API call received an invalid parameter. There is an inconsistency between the template files, the header file erx.h or the EntireX RPC Runtime. The offending parameter (or one of its parents) is its own parent. The parameter definition is cyclic.

Action

The EntireX RPC Runtime is binary backward compatible. It must have the same or a higher EntireX version as the template and header files used.

  • When using the C API erx.h:

    Re-generate the client proxy or server stubs with the correct template file client.tpl and server.tpl and compile and link it with the header file erx.h from the same EntireX RPC version.

  • When using the DCOM Wrapper:

    Re-generate the DCOM server, using the correct template files.


00010045 AT EXIT error
Explanation

An error occurred while establishing the atexit function.

Action

Contact Software AG support.


00010046 Initializing trace failed
Explanation

Tracing for the EntireX RPC Runtime could not be switched on. Either no trace destination had been entered, or the trace file could not be opened.

Action

Contact your System Administrator.


00010052 Library missing
Explanation

No Library name was given.

Action
  • When using the C API erx.h:

    The ERX_SERVER_ADDRESS structure of the EntireX RPC Runtime is not correct or was not correctly initialized. When using the ERX_TM_BROKER_LIBRARY as the medium, szLibraryName must also be given. Check program and correct error.

  • When using the DCOM Wrapper:

    Provide a valid library for the property Library.


00010053 User ID missing
Explanation

No User ID was entered.

Action
  • When using the C API erx.h:

    The ERX_CLIENT_IDENTIFICATION structure of the EntireX RPC Runtime is not correct or was not correctly initialized. Check program and correct error.

  • When using the DCOM Wrapper:

    Provide a valid user ID for the property UserID.


00010054 Password missing
Explanation

No Password was entered.

Action
  1. When using the C API erx.h:

    The ERX_CLIENT_IDENTIFICATION structure of the EntireX RPC Runtime is not correct or was not correctly initialized. Check program and correct error.

  2. When using the DCOM Wrapper:

    Provide a valid password for the property PassWord.


00010055 BCD overflow
Explanation

This is an internal error.

Action

Contact Software AG support.


00010056 BCD division by zero
Explanation

This is an internal error.

Action

Contact Software AG support.


00010058 Invalid direction
Explanation

The EntireX RPC Runtime API call received an invalid parameter. The direction specification must be one of the following: ERX_IN_PARM, ERX_OUT_PARM or ERX_INOUT_PARM.

Action

The EntireX RPC Runtime is binary backward compatible. It must have the same or a higher EntireX version as the template and header files used.

  • When using the C API erx.h: Re-generate the Client proxy or Server stubs with the correct template file client.tpl and server.tpl and compile and link it with the header file erx.h of the same EntireX RPC version.

  • When using the DCOM Wrapper:

    Re-generate the DCOM server, using the correct template files.


00010060 Response <response> from(Command/Info Service)
Explanation

A response was retrieved from the broker's Command/Info Service interface while an EntireX RPC API function ERXTerminateServer was executed.

Action

See Broker Command and Information Services Error Codes.


00010061 Server not found(Command/Info Service)
Explanation

This is an informational message of the EntireX RPC Runtime.

Action

Contact Software AG support.


00010063 Invalid Parameter Definition Version
Explanation

The EntireX RPC parameter definition is not consistent to the EntireX version registered with the EntireX RPC API ERXRegister function.

There is an inconsistency between the template files, the header file erx.h or the EntireX RPC Runtime.

Action
  • When using the C API erx.h:

    For all versions prior to ERX_V530, ERX_PARAMETER_DEFINITION (defined in erx.h of related version) must be used. For ERX_V530 and above ERX_PARAMETER_DEFINITION_V2 (defined in erx.h of related version) must be used. Re-generate the client proxy or server stubs with the correct template file client.tpl and server.tpl and compile and link it with the header file erx.h of the same EntireX RPC version.

  • When using the DCOM Wrapper:

    Re-generate the DCOM server, using the correct template files.


00010064 Internal error
Explanation

This is an internal, informational message of the EntireX RPC Runtime.

Action

Contact Software AG support.


00010065 No more VData Instances to free
Explanation

This is an internal, informational message of the EntireX RPC Server.

Action

Contact Software AG support.


00010066 Cache item not found
Explanation

This is an internal, informational message of the EntireX RPC Runtime.

Action

Contact Software AG support.


00010067 Success pending call
Explanation

This can be a result of a ERX_CC_PEEK command of the EntireX RPC Runtime API function ERXControl.

Action

Program dependent.


00010068 Not yet implemented
Explanation

This is an internal, informational message of the EntireX RPC Runtime.

Action

Contact Software AG support.


00010069 Invalid string buffer
Explanation

While examining the string buffer, an error occurred within the EntireX RPC Runtime. The partner did not adhere to the metastructure <keyword>=<length>,<value>.

Action

Contact Software AG support.


00010070 Parse error
Explanation

This is an internal, informational message of the EntireX RPC Runtime.

Action

Contact Software AG support.


00010071 Server replied with different compression
Explanation

Your EntireX/Natural RPC server does not reply correctly to the EntireX RPC request.

Action

Contact Software AG support.


00010072 Return Code <return-code> <cb-return-code>from Broker Stub
Explanation

The EntireX Broker Stub replied with the specified return codes, where <return-code> is the stub's function return code and <cb-return-code> is from the ACI field return code.

Action

Check your configuration and correct the error.


00010075 No RPC protocol version received by INQUIRE Call
Explanation

The EntireX/Natural RPC server does not reply correctly to the INQUIRE call.

Action

Contact Software AG support.


00010076 Server does not support RPC protocol version needed for the request
Explanation

The request issued by the RPC client cannot be processed. Required functionality is missing in target RPC-based Components or EntireX Broker.

Action

If you are using Arabic Shaping (IBM-420, windows-1256), Hebrew Codepage 803, or codepage style EBCDIC Stateful Codepages or Multibyte or Double-byte Codepages (e.g. UTF8): Check the version of the EntireX Broker and the RPC server in use. Upgrade the EntireX Broker and the RPC server to the latest version available.

If you are not using one of the codepages or codepage styles listed above: Check the version of the RPC server in use. Upgrade the RPC server to the latest version available.

See also Supported RPC Protocols under Platform Coverage in the EntireX Release Notes.


00010077 Broker API Version 2 needed
Explanation

Your EntireX Broker middleware (stub or kernel) does not support the Broker API version needed.

Action

If possible, upgrade your EntireX Broker Middleware (Stub and Kernel) at least to ETB211.


00010078 Parameter maximum length or array bounds overflow
Explanation

There was an overflow of an unbounded array. The maximum array boundaries are determined in the Software AG IDL file.

Action

Check the program and correct the error.


00010079 Invalid unbounded array
Explanation

Accessing an unbounded array has caused an error. This can happen during marshalling/unmarshalling within the EntireX RPC Runtime or when accessing the erxArray... functions directly.

Action

Either:

  1. The unbounded array was destroyed by your program because of memory overwrites. Correct your program.

    or

  2. An internal error occurred in the EntireX RPC Runtime. Contact Software AG support.


00010080 No more unbounded arrays to free
Explanation

This is an internal, informational message of the EntireX RPC Server.

Action

Contact Software AG support.


00010081 Indices not correct
Explanation

The ERX_PARAMETER_DEFINITION_Vx contains incorrect data in the usAttributes and usType fields.

Action

Re-generate, compile and link your client stub.


00010082 Unbounded array does not match the IDL file
Explanation

The data type and attributes of the unbounded array built with erxArrayAlloc do not match the data type, length, dimensions or attributes determined in the Software AG IDL file.

Action

Re-generate your client stub or create the unbounded array with the correct type, length, dimensions and attributes using erxArrayAlloc.


00010083 Parameter not within value range
Explanation

In the Software AG IDL file value ranges are defined for data types. The value you are trying to send is outside of the defined range. For example, it is not possible to send

  • a negative value with data type NU or PU

  • a value greater than 127 and less than -128 with I1

  • a value greater than 32767 and less than -32768 with I2

  • a value greater than 2147483647 and less than -2147483648 with I4.

Action

Check the program and correct the error.


00010084 Unbounded array indices out of bounds
Explanation

The indices you provided to access the unbounded array are out of bounds.

Action

Check the program and correct the error.


00010085 Invalid data for unbounded array
Explanation

The data provided for the unbounded array function does not conform to the rules of the data type. For example, the data provided for a data type P is not packed.

Action

Check the program and correct the error.


00010086 Invalid preserve flag for unbounded array
Explanation

The parameter preserve flag provided for the unbounded array function is invalid.

Action

Check the program and correct the error.


00010087 Invalid dimension for unbounded array
Explanation

The parameter dimension provided for the unbounded array function is invalid.

Action

Check the program and correct the error.


00010088 Unbounded array parameter error
Explanation

The parameter provided for the unbounded array function is invalid.

Action

Check the program and correct the error.


00010089 Stub parameter definition error
Explanation

The parameter definition within the client stub is incorrect.

Action

Re-generate your client stub with the IDL Compiler or EntireX DCOM Wrapper.


00010090 SSL parameter initialization failed
Explanation

Initialization failed because EntireX Broker stub does not support SSL.

Action

Use a stub which supports SSL or configure a transport method supported by the stub used.


00010091 Broker API Version 6 needed
Explanation

Your EntireX Broker middleware (Stub or Kernel) does not support the Broker API version needed.

Action

If possible, upgrade your EntireX Broker middleware (Stub and Kernel).


00010094 Broker Stub could not be loaded
Explanation

The EntireX Broker stub could not be found in the environment.

Action

Try again to install EntireX.


00010095 Cannot open or read File=<file name>
Explanation

An invalid configuration file name or a wrong file type was used to start the RPC server.

Action

Restart the server with correct configuration file.


00010096 Error code for reply error missing
Explanation

This is an internal error of the RPC runtime and RPC server.

Action

Contact Software AG support.


00010097 Password change not supported by RPC server
Explanation

The RPC server you are using does not support alteration of the RPC password. Altering RPC passwords is supported by Natural RPC Server only. EntireX RPC servers do not support alteration of RPC passwords.

Action

Contact Software AG support to check whether a newer version of the Natural RPC Server may support the feature.


00010100 ICONV Open error for Unicode conversions
Explanation

The RPC Runtime uses the iconv interface for converting Unicode encodings under UNIX. The iconv interface returned an error (-1) during open of the conversion descriptor. Either the source or target Unicode encoding are not supported.

Action

The Unicode encoding UTF-16BE is always needed. Depending on the used Unicode encoding of your environment, one of the following additional encodings are required: UTF-32BE UTF-32LE or UTF-16LE. See your UNIX documentation for more information on the iconv interface, especially the iconv open call. Check if the above encodings are available in your UNIX environment.


00010101 ICONV target buffer for Unicode conversions too small
Explanation

The RPC Runtime uses the iconv interface for converting Unicode encodings under UNIX. The iconv interface returned errno E2BIG. This error is an internal error of the RPC Runtime.

Action

See your UNIX documentation for more information on the iconv interface and error E2BIG. Contact Software AG support.


00010102 ICONV Invalid descriptor
Explanation

The RPC Runtime uses the iconv interface for converting Unicode encodings under UNIX. The iconv interface returned errno EBADF. This error is an internal error of the RPC Runtime.

Action

See your UNIX documentation for more information on the iconv interface and error EBADF. Contact Software AG support.


00010103 ICONV Invalid Character or Shift Sequence
Explanation

The RPC Runtime uses the iconv interface for converting Unicode encodings under UNIX. The iconv interface returned errno EILSEQ. This is a user error.

Action

Check your data if valid Unicode characters being sent/received. See your UNIX documentation for more information on the iconv interface and error EILSEQ.


00010104 ICONV Incomplete Character or Shift Sequence
Explanation

The RPC Runtime uses the iconv interface for converting Unicode encodings under UNIX. The iconv interface returned errno EINVAL. This is a user error.

Action

Check your data to see whether valid Unicode characters are being sent/received. See your UNIX documentation for more information on the iconv interface and error EINVAL.


00010105 ICONV Failed
Explanation

The RPC Runtime uses the iconv interface for converting Unicode encodings under UNIX. The iconv interface returned an undefined error.

Action

See your UNIX documentation for more information on the iconv interface. Contact Software AG support.


00010106 Illegal parameter direction
Explanation

Reliable RPC allows only IN parameters.

Action

Remove any other OUT and INOUT parameters from this message.


00010107 Invalid packet type for Reliable RPC
Explanation

The packet type shipped with the RPC protocol is not valid for the use of Reliable RPC.

Action

Contact Software AG support.


00010108 Inconsistent Reliable RPC message
Explanation

The string buffer item "REL" is missing or invalid.

Action

Contact Software AG support.


00010109 Reserved for internal use

00010110 Reserved for internal use

00010200 Parameter Error: data not unsigned numeric. <direction> of IDL field [<parameter-name>] (<type-length>), location=<location>
Explanation

An application parameter cannot be processed because its content does not match the expected format unsigned numeric (NU). See IDL Data Types.

The message provides additional information such as <direction>, <parameter-name>, <type-length> and <location>, where

  • <direction> is either 'Request' if the error was detected before the RPC server was executed, or 'Reply' for the answer, i.e. if the RPC server was already executed.

  • <parameter-name> is available for target programming language C only

  • <type-length> matches the IDL data type; see IDL Data Types

  • <location> contains the hierarchy of IDL nodes, separated by a colon. If an IDL node is an array, its indexes are given in parentheses.

Example: Reply of IDL field (NU14.0), location=3.2(I=5).1.

The IDL below was used for the RPC call. The location is interpreted as follows: Third field on level 1 is 'G-parameter-3-on-level-1'; then second parameter on level 2 is the array 'G-parameter-32-on-level-2'and (I=5) means the fifth occurrence; then the first field on level 3 which is 'G-parameter-322-on-level-3' produced the error.

. . .
define data parameter
1 G-parameter-1-on-level-1       (A10) In
1 G-parameter-2-on-level-1                 In
1 G-parameter-3-on-level-1                 Out
   2 G-parameter-31-on-level-2
      3 G-parameter-311-on-level-3 (A5)
      3 G-parameter-312-on-level-3 (N8)
      3 G-parameter-313-on-level-3 (NU4)
   2 G-parameter-32-on-level-2    (/25)
      3 G-parameter-322-on-level-3 (NU14)
      3 G-parameter-321-on-level-3 (A5)
1 G-parameter-4-on-level-1      (A64)
. . .
end-define
Action

Make sure the IDL file, generated client interface objects and your client application are consistent. Check your client application for parameter integrity.


00010201 Parameter Error: data not signed numeric. <direction> of IDL field [<parameter-name>] (<type-length>), location=<location>
Explanation

An application parameter cannot be processed because its content does not match the expected format signed numeric (N). See IDL Data Types.

The additional information <direction>, <parameter-name>, <type-length> and <location> is explained under error message 00010200.

Action

Make sure the IDL file, generated client interface objects and your client application are consistent. Check your client application for parameter integrity.


00010202 Parameter Error: data not numeric. <direction> of IDL field [<parameter-name>] (<type-length>), location=<location>
Explanation

An application parameter cannot be processed because its content does not match the expected format unsigned numeric (NU) or signed numeric (N). See IDL Data Types.

The additional information <direction>, <parameter-name>, <type-length> and <location> is explained under error message 00010200.

Action

Make sure the IDL file, generated client interface objects and your client application are consistent. Check your client application for parameter integrity.


00010203 Parameter Error: data not unsigned packed. <direction> of IDL field [<parameter-name>] (<type-length>), location=<location>
Explanation

An application parameter cannot be processed because its content does not match the expected format unsigned packed (PU). See IDL Data Types.

The additional information <direction>, <parameter-name>, <type-length> and <location> is explained under error message 00010200.

Action

Make sure the IDL file, generated client interface objects and your client application are consistent. Check your client application for parameter integrity.


00010204 Parameter Error: data not signed packed. <direction> of IDL field [<parameter-name>] (<type-length>), location=<location>
Explanation

An application parameter cannot be processed because its content does not match the expected format signed packed (P). See IDL Data Types.

The additional information <direction>, <parameter-name>, <type-length> and <location> is explained under error message 00010200.

Action

Make sure the IDL file, generated client interface objects and your client application are consistent. Check your client application for parameter integrity.


00010205 Parameter Error: data not packed. <direction> of IDL field [<parameter-name>] (<type-length>), location=<location>
Explanation

An application parameter cannot be processed because its content does not match the expected format unsigned packed (PU) or signed packed (P). See IDL Data Types.

The additional information <direction>, <parameter-name>, <type-length> and <location> is explained under error message 00010200.

Action

Make sure the IDL file, generated client interface objects and your client application are consistent. Check your client application for parameter integrity.


00010206 Parameter Error: I1 < MIN. <direction> of IDL field [<parameter-name>] (<type-length>), location=<location>
Explanation

An application parameter of IDL type I1 cannot be processed because its content is less than the allowed minimum (-128) for I1. See IDL Data Types.

The additional information <direction>, <parameter-name>, <type-length> and <location> is explained under error message 00010200.

Action

Make sure the IDL file, generated client interface objects and your client application are consistent. Check your client application for parameter integrity.


00010207 Parameter Error: I1 > MAX. <direction> of IDL field [<parameter-name>] (<type-length>), location=<location>
Explanation

An application parameter of IDL type I1 cannot be processed because its content is greater than the allowed maximum (+127) for I1. See IDL Data Types.

The additional information <direction>, <parameter-name>, <type-length> and <location> is explained under error message 00010200.

Action

Make sure the IDL file, generated client interface objects and your client application are consistent. Check your client application for parameter integrity.


00010208 Parameter Error: I2 < MIN. <direction> of IDL field [<parameter-name>] (<type-length>), location=<location>
Explanation

An application parameter of IDL type I2 cannot be processed because its content is less than the allowed minimum (-32768) for I2. See IDL Data Types.

The additional information <direction>, <parameter-name>, <type-length> and <location> is explained under error message 00010200.

Action

Make sure the IDL file, generated client interface objects and your client application are consistent. Check your client application for parameter integrity.


00010209 Parameter Error: I2 > MAX. <direction> of IDL field [<parameter-name>] (<type-length>), location=<location>
Explanation

An application parameter of IDL type I2 cannot be processed because its content is greater than the allowed maximum (+32767) for I2. See IDL Data Types.

The additional information <direction>, <parameter-name>, <type-length> and <location> is explained under error message 00010200.

Action

Make sure the IDL file, generated client interface objects and your client application are consistent. Check your client application for parameter integrity.


00010210 Parameter Error: I4 < MIN. <direction> of IDL field [<parameter-name>] (<type-length>), location=<location>
Explanation

An application parameter of IDL type I4 cannot be processed because its content is less than the allowed minimum (-2147483648) for I4. See IDL Data Types.

The additional information <direction>, <parameter-name>, <type-length> and <location> is explained under error message 00010200.

Action

Make sure the IDL file, generated client interface objects and your client application are consistent. Check your client application for parameter integrity.


00010211 Parameter Error: I4 > MAX. <direction> of IDL field [<parameter-name>] (<type-length>), location=<location>
Explanation

An application parameter of IDL type I2 cannot be processed because its content is greater than the allowed maximum (+2147483647) for I2. See IDL Data Types.

The additional information <direction>, <parameter-name>, <type-length> and <location> is explained under error message 00010200.

Action

Make sure the IDL file, generated client interface objects and your client application are consistent. Check your client application for parameter integrity.


00010212 Parameter Error: float < MIN. <direction> of IDL field [<parameter-name>] (<type-length>), location=<location>
Explanation

An application parameter of IDL type F4 cannot be processed because its content is less than the allowed minimum (1.175494351e-38F) for F4. See IDL Data Types.

The additional information <direction>, <parameter-name>, <type-length> and <location> is explained under error message 00010200.

Action

Make sure the IDL file, generated client interface objects and your client application are consistent. Check your client application for parameter integrity.


00010213 Parameter Error: float > MAX. <direction> of IDL field [<parameter-name>] (<type-length>), location=<location>
Explanation

An application parameter of IDL type F4 cannot be processed because its content is greater than the allowed maximum (3.402823466e+38F) for F4. See IDL Data Types.

The additional information <direction>, <parameter-name>, <type-length> and <location> is explained under error message 00010200.

Action

Make sure the IDL file, generated client interface objects and your client application are consistent. Check your client application for parameter integrity.


00010215 Parameter Error: float HUGE_VAL. <direction> of IDL field [<parameter-name>] (<type-length>), location=<location>
Explanation

An application parameter of IDL type F4 cannot be processed because of conversation error HUGE_VAL. See C library strtod() for more information.

The additional information <direction>, <parameter-name>, <type-length> and <location> is explained under error message 00010200.

Action

Make sure the IDL file, generated client interface objects and your client application are consistent. Check your client application for parameter integrity.


00010216 Parameter Error: double < MIN. <direction> of IDL field [<parameter-name>] (<type-length>), location=<location>
Explanation

An application parameter of IDL type F8 cannot be processed because its content is less than the allowed minimum (2.2250738585072014e-308) for F8. See IDL Data Types.

The additional information <direction>, <parameter-name>, <type-length> and <location> is explained under error message 00010200.

Action

Make sure the IDL file, generated client interface objects and your client application are consistent. Check your client application for parameter integrity.


00010217 Parameter Error: double > MAX. <direction> of IDL field [<parameter-name>] (<type-length>), location=<location>
Explanation

An application parameter of IDL type F8 cannot be processed because its content is greater than the allowed maximum (1.7976931348623158e+308) for F8. See IDL Data Types.

The additional information <direction>, <parameter-name>, <type-length> and <location> is explained under error message 00010200.

Action

Make sure the IDL file, generated client interface objects and your client application are consistent. Check your client application for parameter integrity.


00010218 Parameter Error: double exponent over-, underflow. <direction> of IDL field [<parameter-name>] (<type-length>), location=<location>
Explanation

An application parameter of IDL type F4 or F8 cannot be processed because of exponent over- or underflow. See IDL Data Types.

The additional information <direction>, <parameter-name>, <type-length> and <location> is explained under error message 00010200.

Action

Make sure the IDL file, generated client interface objects and your client application are consistent. Check your client application for parameter integrity.


00010219 Parameter Error: bad vdata provided. <direction> of IDL field [<parameter-name>] (<type-length>), location=<location>
Explanation

An application parameter of IDL type AV, BV, KV or UV cannot be processed because incorrect data was applied, see Using Variable-length Data Types AV, BV, KV and UV.

The additional information <direction>, <parameter-name>, <type-length> and <location> is explained under error message 00010200.

Action

Make sure the IDL file, generated client interface objects and your client application are consistent. Check your client application for parameter integrity.


00010220 Parameter Error: bounds exceeds maximum. <direction> of IDL field [<parameter-name>] (<type-length>), location=<location>
Explanation

An index of an application parameter for an IDL unbounded array (see array-definition under Software AG IDL Grammar in the IDL Editor documentation) cannot be processed because its value exceeds the maximum for upper bound.

The additional information <direction>, <parameter-name>, <type-length> and <location> is explained under error message 00010200.

Action

Make sure the IDL file, generated client interface objects and your client application are consistent. Check your client application for parameter integrity.