Broker CIS Data Structures

EntireX Broker provides an API for Command and Information Services (CIS) that include the following: shutting down conversations, servers and services; switching trace on and off; retrieving information on clients; registering servers and services.

Command and Information Services can be accessed from any environment from which EntireX Broker can be accessed. The structures for these services are available for the programming languages Assembler, C, Natural and COBOL.

Before referring to the structure tables below, see section Command-line Utilities.

This document describes the Command and Information Services data structures. It covers the following topics:.

Note:
Version numbers in the tables below refer to the CIS interface version and not to the Broker version.


Command Request Structure

The request structure is given in the table below. Note possible combinations under Command Request Parameter Combinations.

Field Name Format CIS
Interface
Version
Comment
VERSION I2 1 Interface version.
OBJECT-TYPE I2 1 Specifies the object type to which the command applies:
7 BROKER
4 CONVERSATION
18 PARTICIPANT (1)
9 PSF
21 SECURITY
1 SERVER
6 SERVICE
29 TRANSPORT
COMMAND I2 1 Valid commands:
13 ALLOW-NEWUOWMSGS
20 CLEAR-CMDLOG-FILTER
88 NO-OPERATION
17 CONNECT-PSTORE
28 DISABLE-ACCOUNTING
24 DISABLE-CMDLOG
22 DISABLE-CMDLOG-FILTER
37 DISABLE-DYN-WORKER
18 DISCONNECT-PSTORE
27 ENABLE-ACCOUNTING
23 ENABLE-CMDLOG
21 ENABLE-CMDLOG-FILTER
38 ENABLE-DYN-WORKER
14 FORBID-NEWUOWMSGS
25 PRODUCE-STATISTICS
12 PURGE
29 RESET-USER
31 RESUME
19 SET-CMDLOG-FILTER
42 SET-UOW-STATUS
8 SHUTDOWN
33 START
36 STATUS
32 STOP
30 SUSPEND
26 SWITCH-CMDLOG
35 TRACE-FLUSH
2 TRACE-OFF
1 TRACE-ON
34 TRAP-ERROR
OPTION I2 1 Possible values:
3 IMMED
4 QUIESCE
11 TR_LEVEL1
12 TR_LEVEL2
13 TR_LEVEL3
14 TR_LEVEL4
15 TR_LEVEL5
16 TR_LEVEL6
17 TR_LEVEL7
18 TR_LEVEL8
20 ACCEPTED
21 CANCELLED
P-USER-ID A28 1 Specifies the internal unique ID which is used to distinguish between several users with the same user ID. Using this field uniquely identifies a single server. The value for this field must be obtained by a previous info request. This field is used as a handle, i.e. no translation is performed.
UOWID A16 2 Selection field. Optional. Specifies the unit of work to be purged.
UID A32 4 Selection field. Optional. Specifies the user name for participant shutdown.
TOKEN A32 4 Selection field. Optional. Specifies the token name for participant shutdown.
SERVER-CLASS A32 5 Selection field. Optional. Specifies the server class name for command log filter addition or removal.
SERVER A32 5 Selection field. Optional. Specifies the server name for command log filter addition or removal.
SERVICE A32 5 Selection field. Optional. Specifies the service name for command log filter addition or removal.
RESERVED A32 5 Reserved for future use.
CONVID A16 7 Optional. Specifies the conversation to be shut down with command SHUTDOWN.
TRANSPORTID A3 7 Optional. Specifies the transport task. Possible values: NET|Snn|Tnn. Required for commands RESUME, START, STATUS, STOP, SUSPEND.
EXCLUDE-ATTACH-SERVERS I1 7 Optional. Exclude attach servers when shutting down a service.
SEQNO I4 7 Optional. Specifies the sequence number of the participant (client or server) to be shut down. Can be used instead of P-USER-ID.
ERROR-NUMBER I4 7 Specifies the error number to be used with command TRAP-ERROR.

Command Request Parameter Combinations

The following table shows all valid combinations of parameters:

Object Type Command Option Comment
BROKER CLEAR-CMDLOG-FILTER   Remove a command log filter. The command log filter can be identified using the fields UID, SERVER-CLASS, SERVER and SERVICE.
DISABLE-ACCOUNTING   Disable accounting.
DISABLE-CMDLOG   Disable command logging.
DISABLE-CMDLOG-FILTER   Disable a command log filter. The command log filter can be identified using the fields UID, SERVER-CLASS, SERVER and SERVICE.
DISABLE-DYN-WORKER   Disable the DYNAMIC-WORKER-MANAGEMENT. DYNAMIC-WORKER-MANAGEMENT=YES must be configured in the attribute file. The current number of active worker tasks will not be changed until DYNAMIC-WORKER-MANAGEMENT is enabled again.
ENABLE-ACCOUNTING   Enable accounting.
ENABLE-CMDLOG   Enable command logging.
ENABLE-CMDLOG-FILTER   Enable a command log filter. The command log filter can be identified using the fields UID, SERVER-CLASS, SERVER and SERVICE.
ENABLE-DYN-WORKER   Enable the DYNAMIC-WORKER-MANAGEMENT again. DYNAMIC-WORKER-MANAGEMENT=YES must be configured in the attribute file. DYNAMIC-WORKER-MANAGEMENT has been disabled before. Additional worker tasks can be started again, or stopped if not used.
PRODUCE-STATISTICS   Output current statistics to the broker log.
SET-CMDLOG-FILTER   Add a command log filter. The command log filter can be identified using the fields UID, SERVER-CLASS, SERVER and SERVICE.
SHUTDOWN   Shutdown Broker immediately.
SWITCH-CMDLOG   Force a switch of command logging output files.
TRACE-FLUSH   Flush all trace data kept in internal trace buffers to stderr (DD:SYSOUT). The broker-specific attribute TRMODE=WRAP is required.
TRACE-OFF   Set trace off in Broker.
TRACE-ON LEVEL Set TRACE-LEVEL on in Broker.
TRAP-ERROR error number Modifies the setting of the broker-specific attribute TRAP-ERROR.
CONVERSATION SHUTDOWN convid  
SERVER SHUTDOWN IMMED Shutdown server immediately. The server must be uniquely identified using field P_USER_ID or SEQNOand will be completely removed from the BROKER environment.
The following steps will be performed:
  • Error code 00100050 will be replied to the server if it is waiting.

  • All existing conversations will be finished with EOC.

  • User will be logged off.

QUIESCE Shutdown server but allow existing conversations to continue.
The termination is signaled to the server by error code 00100051. After this, the next call issued must be a DEREGISTER for all services (SC=*,SN=*,SV=* if more than one service is active).
PSF ALLOW-NEWUOWMSGS   New UOW messages are allowed.
CONNECT-PSTORE   Connect the persistent store.
DISCONNECT-PSTORE   Disconnect the persistent store.
FORBID-NEWUOWMSGS   New UOW messages are not allowed.
PURGE   Remove a unit of work from the EntireX Broker persistent store (from version 2).
SET-UOW-STATUS ACCEPTED Change the status of a UOW that resides in the postpone queue back to status ACCEPTED to make it receivable again.
Applies to the specified UOW only. To address all UOWs of a service, use broker command-line utility ETBCMD (z/OS | UNIX | Windows). See also Postponing Units of Work under Using Persistence and Units of Work in the Platform-independent Administration documentation.
CANCELLED Cancel the specified UOW that resides in the postpone queue. It performs SYNCPOINT OPTION=CANCEL of the receiver.
Applies to the specified UOW only. To address all UOWs of a service, use broker command-line utility ETBCMD.
TRACE-OFF   Set trace off in the persistent store.
TRACE-ON LEVEL Set TRACE-LEVEL on in the persistent store.
PARTICIPANT SHUTDOWN IMMED Shutdown participant immediately. The participant must be identified, using fields P-USER-ID, UID or TOKEN and will be completely removed from the Broker environment.
The following steps will be performed:
  • Error code 00100050 will be replied to the participant, if it is waiting.

  • All existing conversations will be finished with EOC.

  • User will be logged off.

QUIESCE Shutdown participant but allow existing conversations to continue. The termination is signaled to the participant by error code 00100051.
seqno INFO requests return a seqno that can be used here to identify the target.
SECURITY RESET-USER   Clear all cached security information for a user. The user must be identified using the field UID.
TRACE-OFF   Set trace off in EntireX Security.
TRACE-ON LEVEL Set TRACE-LEVEL on in EntireX Security.
SERVICE SHUTDOWN IMMED  
QUIESCE  
class/server/service  
TRANSPORT RESUME NET | Snn | Tnn Resume NET transport or a specific SSL or TCP communicator instance.
START NET | Snn | Tnn Start NET transport or a specific SSL or TCP communicator instance.
STATUS NET | Snn | Tnn Show status of NET transport or a specific SSL or TCP communicator instance.
STOP NET | Snn | Tnn Stop NET transport or a specific SSL or TCP communicator instance.
SUSPEND NET | Snn | Tnn Suspend NET transport or a specific SSL or TCP communicator instance.
TRACE-OFF COM | NET | SSL | TCP Switch trace off for all communicators (COM) or only NET, SSL or TCP communicators.
TRACE-ON LEVELn COM | NET | SSL | TCP Set trace level for all communicators (COM) or only NET, SSL or TCP communicators.

Common Header Structure for Response Data

This section describes the header structure (Struct HD_CIS), which is used by both the information services and the command service. For command-specific or information-specific structures, see Command Request Structure or Information Request Structure.

The header structure is always the first structure in the receive buffer that comes back from an information or command service request. Even receive buffers obtained with subsequent RECEIVE commands have this structure as the first part of the buffer. The header structure has the following layout, whereby in the Format column I = 4-byte integer value:

Field Name Format CIS
Interface
Version
Comment
ERROR-CODE I4 1 Result of request. Value 0 indicates success. See Broker Command and Information Services Error Codes.
TOTAL-NUM-OBJECTS I4 1 Total number of objects returned in object list.
CURRENT-NUM-OBJECTS I4 1 Number of objects returned within current receive block.
MAX-SC-LEN I4 1 Length of longest SERVER-CLASS value in total object list. This field is only relevant if the object-specific structure for the object list contains the SERVER-CLASS field.
MAX-SN-LEN I4 1 Length of longest SERVER-NAME value in total object list. This field is only relevant if the object-specific structure for the object list contains the SERVER-NAME field.
MAX-SV-LEN I4 1 Length of longest SERVICE value in total object list. This field is only relevant if the object-specific structure for the object list contains the SERVICE field.
MAX-UID-LEN I4 1 Length of longest USER-ID value in total object list. This field is only relevant if the object-specific structure for the object list contains the USER-ID field.
MAX-TK-LEN I4 1 Length of longest TOKEN value in total object list. This field is only relevant if the object-specific structure for the object list contains the TOKEN field.
REQUESTTIME I4 4 This is the time that the request was received by the Broker kernel.
ETB-ERROR-CODE A8 5 This is any secondary error code from the broker kernel. See Error Messages and Codes.
ETB-ERROR-TEXT A40 5 This is any secondary error text from the broker kernel. See Error Messages and Codes.
MAX-PPC-LIB-LEN I4 6 Length of longest RPC-LIB value in total object list. This field is only relevant if the object-specific structure for the object list contains the RPC-LIB field.
MAX-PPC-PGM-LEN I4 6 Length of longest RPC-PGM value in total object list. This field is only relevant if the object-specific structure for the object list contains the RPC-PGM field.

Information Request Structure

The information services can handle many different information structures. Applications use the information request structure to specify which information structure is required. See also Examples of Selection Criteria.

The layout of the information request structure is shown in the following table. Fields BLOCK-LENGTH, VERSION, and OBJECT-TYPE are mandatory. All other fields are optional. Fields of type I or B are considered "not specified" if they contain low value. Fields of type A are considered "not specified" if they contain low value or spaces (according to the caller's character set).

Field Name Format CIS
Interface
Version
Opt/
Req
Comment
BLOCK-LENGTH I4 1 R Defines the block length of the data packages returned (without length of header.)
(RECEIVE-LENGTH field of ACI not used in order to keep the interfaces independent.)
VERSION I2 1 R Interface version. This describes the kind and amount of information wanted and enables us to extend the information in further versions of INFO services. Valid versions are 1 and above.
OBJECT-TYPE I2 1 R Specifies the object type for which the information is required. If an object type is specified without additional selection criteria, a list of all active objects of that type is returned in accordance with the information service being addressed (INFO or USER-INFO). Possible values are:
BROKER 7 Info on this Broker. (1)
CLIENT 2 Info on active clients
CMDLOG_FILTER 23 Info on command log filters
CONVERSATION 4 Info on active conversations
NET 24 Info on the Entire Net-Work communicator. (1)
PARTICIPANT 18 Info on participants
POOL_USAGE 25 Info on Broker pool usage and dynamic memory management. (1)
PSF 9 Info on a unit of work's status
PSFADA 12 Info on the Adabas persistent store. (1)
PSFCTREE 20 Info on the c-tree persistent store. (1)
PSFDIV 11 Info on the DIV persistent store. (1)
RESOURCE_USAGE 26 Info on Broker resource usage. (1)
SECURITY 21 Info on EntireX Security. (1)
SERVER 1 Info on active servers
SERVICE 6 Info on active services
SSL 22 Info on SSL communicators. (1)
STATISTICS 27 Statistics on selected Broker resources. (1)
TCP 19 Info on TCP communicators. (1)
UOW_STATISTICS 31 Statistics on UOWs of selected services.
USER 28 Info on all users of Broker regardless of the user type
WORKER 8 Info on all workers. (1)
WORKER_USAGE 30 Info on usage of worker tasks and dynamic worker management. (1)
(1) No additional selection criteria are needed. Other selection criteria fields are ignored.
USER-ID A32 1 O Selection criteria field. This is the user ID of the client or server as specified in the field USER-ID of the EntireX Broker ACI. The value of the field is used to restrict information to related objects of a specific user.
P-USER-ID B28 1 O Selection criteria field. Specifies the internal unique ID which is used to distinguish between several users with the same user ID.
This field uniquely identifies a client or server process. The value for this field must be obtained by a previous info request.
This field is used as a handle, i.e. no translation is performed. Any value different from low value will be treated as selection value.
TOKEN A32 1 O Selection criteria field. Corresponds to the TOKEN field of the EntireX Broker ACI. The value restricts the information to objects of users which have specified this TOKEN value in their Broker calls.
SERVER-CLASS A32 1 O Selection criteria field. Corresponds to field SERVER-CLASS in the EntireX Broker ACI. The value of this field is used to restrict information to objects concerning the services registered with this class.
SERVER-NAME A32 1 O Selection criteria field. Corresponds to field SERVER-NAME in the EntireX Broker ACI. The value of this field is used to restrict information to objects concerning the services registered with this server name.
SERVICE A32 1 O Selection criteria field. Corresponds to field SERVICE in the EntireX Broker ACI. The value of this field is used to restrict information to objects concerning the services registered with this service name.
CONV-ID A16 1 O Selection criteria field. Specifies the conversation ID of a conversation. Using this field uniquely identifies a conversation. The value for this field must be obtained by a previous info request.
RESERVED I2 1   Reserved for future use.
UOWID A16 2 O Selection criteria field. Specifies the unit of work ID.
UOWSTATUS I1 2 O Selection criteria field. Specifies the unit of work status search criteria:
1 RECEIVED
2 ACCEPTED
3 DELIVERED
4 BACKEDOUT
5 PROCESSED
6 CANCELLED
7 TIMEOUT
8 DISCARDED
USERSTATUS A32 2 O Selection field. Specifies the user status selection value.
RECVUID A32 2 O Selection field. Specifies the unit-of-work receiver's user ID.
RECVTOKEN A32 2 O Selection field. Specifies the unit-of-work receiver's token ID.
RECVSERVER A32 2 O Selection field. Specifies the unit-of-work receiver's server name.
RECVSERVICE A32 2 O Selection field. Specifies the unit-of-work receiver's service name.
RECVCLASS A32 2 O Selection field. Specifies the unit-of-work receiver's class name.
CONVERSATION-TYPE I2 5 O Selection field. Specifies the conversation type:
1 NON-CONVERSATIONAL
2 CONVERSATIONAL

Legend

Abbreviation Long Form / Description
Y The field is specified.
I The field is ignored.
N The field is not specified; information should not be restricted by its value.

Column Abbreviation Table

Abbreviation Long Form / Description
UID USER-ID
RECV-UID RECEIVER USER-ID
PUID P-USER-ID
TK TOKEN
RECV-TK RECEIVER TOKEN
SC SERVER-CLASS
RECV-SC RECEIVER SERVER-CLASS
SN SERVER-NAME
RECV-SN RECEIVER SERVER-NAME
SV SERVICE
RECV-SV RECEIVER SERVICE
CID CONV-ID
UOWID UNIT OF WORK ID
UWSTAT UNIT OF WORK STATUS
USTAT USER STATUS

Selection Criteria CLIENT Object Type

Selection PUID UID TK SC SN SV CID
Client (1) Y I I I I I I
Client (2) N Y Y I I I I
Clients with UID N Y N I I I I
Clients with TK N N Y I I I I
all clients N N N I I I I

Selection Criteria SERVER Object Type

Selection PUID UID TK SC SN SV CID
Server (1) Y I I I I I I
Server (2) N Y Y I I I I
Servers with UID N Y N I I I I
Servers with TK N N Y I I I I
Servers offering service N N N Y Y Y I
All Servers N N N N N N I

Selection Criteria SERVICE Object Type

Selection PUID UID TK SC SN SV CID
Services offered by this server (1) Y I I I I I I
Services offered by this server (2) N Y Y I I I I
Services with this SC/SN/SV N N N Y Y Y I
Services with this SC/SN N N N Y Y N I
Services with this SC/SV N N N Y N Y I
Services with this SC N N N Y N N I
Services with this SN/SV N N N N Y Y I
Services with this SN N N N N Y N I
Services with this SV N N N N N Y I
All services N N N N N N I

Selection Criteria CONV Object Type

Selection PUID UID TK SC SN SV CID
Conversations of this client/server (1) Y I I I I I I
Conversations of this client/server (2) N Y Y I I I I
Conversations of this service N N N Y Y Y I
The conversation with CID N N N N N N Y
All Conversations N N N N N N N

Selection Criteria PSF Object Type (Version 2 and above)

Selection UOWID UID TK SC SN SV CID
The unit of work Y I I I I I I
All units of work for the conversation N I I I I I Y
UOWs with client UID N Y N N N N N
UOWs with clients having TK N N Y N N N N
UOWs with the client SC N N N Y N N N
UOWs with the client SN N N N N Y N N
UOWs with the client SV N N N N N Y N
UOWs with the client SC/SN N N N Y Y N N
UOWs with the client SC/SV N N N Y N Y N
UOWs with the client SC/SN/SV N N N Y Y Y N
UOWs with the client SN/SV N N N N Y Y N
All UOWs N N N N N N N
UOWs with user status I I I I I N Y
UOWs with UOW status I I I I I Y N
UOWs with server ID Y N N N N N N
UOWs with server having TK N N Y N N N N
UOWs with the server SC N N N Y N N N
UOWs with the server SN N N N N Y N N
UOWs with the server SV N N N N N Y N
UOWs with the server SC/SN N N N Y Y N N
UOWs with the server SC/SV N N N Y N Y N
UOWs with the server SC/SN/SV N N N Y Y Y N
UOWs with the server SN/SV N N N N Y Y N
All UOWs N N N N N N N

Key

(1) if participant is not using TK (token) for authentication
(2) if participant is using TK (token) for authentication

Information Reply Structures

The information reply structures are defined and described in the delivered source code. The structures are available for programming languages Assembler, C, Natural and COBOL.

BROKER-OBJECT (Struct INFO_BKR)

Field Name Format CIS
Interface
Version
Description / Action
PLATFORM A8 1 Platform dependent.
RUNTIME I4 1 Time since Broker started, in seconds. Computed from current time - Broker start time.
NUM-WORKER-ACT I4 1 Number of active workers.
NUM-LONG I4 1 Number of long buffers defined (see NUM-LONG-BUFFER).
LONG-ACT I4 1 Number of long buffers active (in use).
LONG-HIGH I4 1 Highest number of long buffers active since Broker started.
NUM-SHORT I4 1 Number of short buffers defined (see NUM-SHORT-BUFFER).
SHORT-ACT I4 1 Number of short buffers active.
SHORT-HIGH I4 1 Highest number of short buffers active since Broker started.
LONG-SIZE I4 1 Size of long buffer entry.
SHORT-SIZE I4 1 Size of short buffer entry.
NUM-SERVICE I4 1 Number of services defined (see NUM-SERVICE).
SERVICE-ACT I4 1 Number of services active.
NUM-SERVER I4 1 Number of servers defined (see NUM-SERVER).
SERVER-ACT I4 1 Number of servers active. This counter also includes the active Attach Server instances.
SERVER-HIGH I4 1 Highest number of servers active since Broker started.
NUM-CLIENT I4 1 Number of clients defined (see NUM-CLIENT).
CLIENT-ACT I4 1 Number of clients active.
CLIENT-HIGH I4 1 Highest number of clients active since Broker started.
NUM-CONV I4 1 Number of conversations defined (see NUM-CONVERSATION).
CONV-HIGH I4 1 Highest number of conversations active since Broker started.
TRACE-LEVEL I2 1 Actual Trace Level value.
UNUSED1 I2 1 Unused.
LMAXUOWS I4 2 Maximum number of active UOWs.
LMAXUOWMSG I4 2 Maximum number of messages in a UOW.
LUWTIME I4 2 Maximum UOW lifetime
LMAXDELCNT I4 2 Currently not in use. (Count is always zero.)
LMAXMSGSIZE I4 2 Maximum size of a message
LTOTALUOWS I4 2 Number of UOWs.
CSTORE I1 2 Store attribute for all UOWs:
0 OFF
1 BROKER
CPSTORE I1 2 Startup value for persistent store:
0 NO
1 HOT
2 COLD
4 WARM
CUWSTATP I1 2 UOW status lifetime multiplier (0-255)
CDEFERRED I1 2 Default status attribute for all UOWs:
0 NO
1 YES
CACCOUNTING A3 3
NO Accounting not active
YES Accounting active on UNIX and Windows
nnn SMF Record number on z/OS
CAUTHDEFAULT I1 3 Authorization Default:
0 NO
1 YES
LSSLPORT I4 3 Port number being used for SSL transport (UNIX and Windows only).
NEW-UOW-MESSAGES I1 3 New UOW messages:
0 NO
1 YES
UNUSED2 I1 3 Unused.
CPLATNAME A32 3 Full platform name where Broker is running
CPSTORETYPE A8 3 Persistent store type. It will be one of the following values:
DIV Data-in-Virtual Persistent Store (z/OS only)
FILE B-Tree Store (UNIX and Windows only, no longer supported)
ADABAS Adabas Persistent Store (all platforms)
HIGHEST-API-VERSION I1 4 For example: 0x06.
HIGHEST-CIS-VERSION I1 4 For example: 0x06.
PSTORE-CONNECTED I1 4
0 NO
1 YES
ATTACH-MGRS-ACT I4 4 Number of attach servers active.
LUWSTAT-ADD-TIME I4 4 Unit of work status additional lifetime.
PRODUCT-VERSION A16 4 Version, release, service pack, and patch level, e.g. 8.0.1.00.
LICENSE-EXPIRATION-DATE A10 5 License expiration date.
SECURITY-TYPE I1 5 Security type:
0 None
1 SAG
2 Light
3 Other
ACCOUNTING-ENABLED I1 5
1 Accounting enabled
0 Accounting disabled
NUM-FREE-CCB I4 5 Number of free CCB entries (conversation control block).
NUM-FREE-PCB I4 5 Number of free PCB entries(participant control block).
NUM-FREE-PCBEXT I4 5 Number of free PCBEXT entries (PCB extension).
NUM-FREE-SCB I4 5 Number of free SCB entries (service control block).
NUM-FREE-SCBEXT I4 5 Number of free SCBEXT entries (SCB extension).
NUM-FREE-TCBEXT I4 5 Number of free TCBEXT entries (TCP extension).
NUM-FREE-TOQ I4 5 Number of free TOQ entries (timeout queue).
NUM-FREE-UWCB I4 5 Number of free UWCB entries (UOW control block).
NUM-COM-BUFFER I4 5 Number of communication buffers.
NUM-COM-SLOT I4 5 Number of communication buffer slots.
NUM-COM-SLOT-FREE I4 5 Number of communication buffer slots free.
NUM-CMDLOG-FILTER I4 5 Number of CMDLOG filters.
NUM-CMDLOG-FILTER-ACTIVE I4 5 Number of CMDLOG filters active.
CMDLOG I1 5 Reflects status of Broker attribute CMDLOG:
1 Command logging features are available for the Broker
0 Command logging not available
CMDLOG-ENABLED I1 5 Reflects result of commands DISABLE-CMDLOG and ENABLE-CMDLOG:
1 Command logging enabled
0 Command logging temporarily disabled
NOTUSED3 A2 5 Alignment.
ATTRIBUTE-FILE-NAME A256 5 Attribute file name.
LOG-FILE-NAME A256 5 Name of trace log file.
LOG-FILE-SIZE I4 5 Size of trace log file.
LICENSE-FILE-NAME A256 5 License file name.
CMDLOG-FILE-SIZE I4 5 Max. size of CMDLOG file.
OPEN-CMDLOG-FILE-NAME A256 5 Name of open CMDLOG file.
OPEN-CMDLOG-FILE-SIZE I4 5 Size of CMDLOG file.
CLOSED-CMDLOG-FILE-NAME A256 5 Name of closed CMDLOG file.
CLOSED-CMDLOG-FILE-SIZE I4 5 Size of closed CMDLOG file.
RESERVED I4 5 Reserved for future use.
ACCOUNTING-FILE-NAME A256 5 Name of accounting output file.
ACCOUNTING-FILE-SIZE I4 5 Size of accounting output file.
CONTROL-INTERVAL I4 5 Control interval in seconds.
MAX-TAKEOVER-ATTEMPTS I4 5 Max. number of takeover attempts.
RUN-MODE A16 5 Broker run mode.
PARTNER-CLUSTER-ADDRESS A32 5 Partner Cluster Address.
CMDLOG-SWITCHES-BY-SIZE I4 5 Number of CMDLOG switches by size.
CMDLOG-SWITCHES-BY-CIS I4 5 Number of CMDLOG switches by CIS.
CLIENT-NONACT I4 7 Client timeout in seconds. See broker attribute CLIENT-NONACT.
NUM-WQE I4 7 Number of work queue entries. See broker attribute NUM-WQE.
TOTAL-STORAGE-ALLOCATED I4 7 Size of allocated storage in bytes.
TOTAL-STORAGE-ALLOCATED-HIGH I4 7 Highest size of allocated storage in bytes since Broker started.
TOTAL-STORAGE-LIMIT I4 7 Maximum of storage that can be allocated. See broker attribute MAX-MEMORY.
BROKER-ID A32 7 BROKER-ID. See broker attribute BROKER-ID.
HOST-NAME A256 7 Name of host running broker (on z/OS copied from CVTSNAME).
SYSPLEX-NAME A8 7 Name of SYSPLEX (copied from ECVTSPLX).
CAUTOLOGON I1 7 Auto logon:
0 NO
1 YES
See broker attribute AUTOLOGON.
CDYNAMIC-MEMORY-MANAGEMENT I1 7 Dynamic memory management:
0 NO
1 YES
See broker attribute DYNAMIC-MEMORY-MANAGEMENT.
CDYNAMIC-WORKER-MANAGEMENT I1 7 Dynamic worker management:
0 NO
1 YES
See broker attribute DYNAMIC-WORKER-MANAGEMENT.
CSERVICE-UPDATES I1 7 Service updates:
0 NO
1 YES
See broker attribute SERVICE-UPDATES.
CTRANSPORT-NET I1 7 Was TRANSPORT=NET specified?
0 NO
1 YES
See broker attribute TRANSPORT=NET.
CTRANSPORT-SSL I1 7 Was TRANSPORT=SSL specified?
0 NO
1 YES
See broker attribute TRANSPORT=SSL.
CTRANSPORT-TCP I1 7 Was TRANSPORT=TCP specified?
0 NO
1 YES
See broker attribute TRANSPORT=TCP.
NTRAP-ERROR I4 7 Value defined for attribute TRAP-ERROR.
CPU-USED-IN-SECONDS I4 9 Amount of CPU time in seconds used by Broker process since Broker start.
CPU-USED-REST-IN-MICROSECONDS I4 9 Additional CPU time in microseconds used by Broker process since Broker start. (CPU time is provided by two fields because total value including microseconds may exceed one 4-byte integer.)
CPU-USED-PERCENTAGE I4 9 CPU time consumed by Broker process in relation to total CPU workload in percent and normalized by the number of CPUs. It never exceeds 100%.

CLIENT-SERVER-PARTICIPANT-OBJECT (Struct INFO_CS)

Field Name Format CIS
Interface
Version
Description / Action
USER-ID A32 1 Corresponds to USER-ID in the ACI. The maximum length of this field is determined by field MAX-UID-LEN in the header. See Common Header Structure for Response Data.
P-USER-ID B28 1 Specifies the physical internal unique ID which is used to distinguish between several users with the same user ID. This field is used as a handle, i.e. no translation is performed. With CIS commands SHUTDOWN PARTICIPANT and SHUTDOWN SERVER, field SEQNO is provided as unique criterion.
P-USER-ID-CHAR A28 1 No longer used.
TOKEN A32 1 Corresponds to TOKEN in the ACI. The maximum length of this field is determined by MAX-TK-LEN in the header. See Common Header Structure for Response Data.
CHAR-SET I2 1 Character set of user's platform:
34 EBCDIC IBM
66 EBCDIC SNI
1 ASCII PC 386
16 ASCII PC OS/2
128 ASCII 8859-1
ENDIAN I2 1 Endian type of user's platform:
1 Big endian (high order first)
0 Little endian
STATUS I2 1 Status of user:
0 Not waiting
5 Waiting
UNUSED1 I2 1 Unused.
WAIT-CONV-TYPE A16 1 Only valid if user is waiting. Indicates what kind of conversation user is waiting for:
NEW User waiting for new conversations
ANY User waiting for any conversation
OLD User waiting for old conversations
NONE User waiting for non-conversational reply
CONV-ID User waiting for specific conversation
WAIT-SERVER-CLASS A32 1 When waiting for ANY, NEW or OLD, the class name of the service to wait for is returned.
WAIT-SERVER-NAME A32 1 When waiting for ANY, NEW or OLD, the server name of the service to wait for is returned.
WAIT-SERVICE A32 1 When waiting for ANY, NEW or OLD, the name of the service to wait for is returned.
CONV-ACT I4 1 Number of active conversations of this user.
SERVICE-ACT I4 1 Number of services active (offered) by this server. This information is available for server only.
LAST-ACTIVE I4 1 Elapsed time since the last activity of the user.
NONACT I4 1 Non-activity time-out value.
WAIT-NEW I4 1 Accumulated time a server waited for new conversations. (Receive with CONVID=NEW or CONVID=ANY). A high value indicates that server has capacity.
NUM-WAIT-NEW I4 1 Number of times a server had to wait for new conversations.
WAIT-OLD I4 1 Accumulated time a server or client waited for messages of existing conversations. (Receive with CONVID=cid or CONVID=OLD.) A high value for a server indicates that server had to wait for the clients. A high value for a client indicates that the server's response was delayed.
NUM-WAIT-OLD I4 1 Number of times a server or client had to wait for messages of existing conversations.
SUM-CONV I4 1 Sum of conversations (including non-conversational requests) for the user since start of User.
LTOTALUOWS I4 2 Number of UOWs.
IP-ADDRESS A16 4 IPv4 address of client/server.
HOST-NAME A256 4 Host name of client/server.
RECV-OPTION I1 4 Receive option.
ATTACH-MGR I1 4 Attach manager indicator.
UNUSED2 I2 4 Unused.
RESERVED_ETBINFO_V73_1 A32 5 Reserved for future use.
APPLICATION-NAME A64 5

The name of the executable that called the broker. If the program that issued the broker call is running on a mainframe system, the eight-byte job name is used as application name. If the job name is shorter than eight bytes, it is padded with underscore characters.

If the z/OS program issuing the broker call is running in a TP monitor (except IDMS/DC), a dash sign is set as ninth byte. The following eight bytes from position 10-17 contain monitor-dependent data:

CICS The four-byte transaction ID is set.
Com-plete The eight-byte program name is set.
IMS The four-byte IMS ID is set.

Padding blanks in bytes 10-17 are replaced by underscore characters.

APPLICATION-TYPE A8 5 Application type. This field is used internally. It can be set by other Software AG products, which pass this value to the Broker stub via an unpublished control block. If no value is set, the respective operating system is displayed here.
RESERVED_ETBINFO_V73_3 A32 5 Reserved for future use.
COUNT-AUTHORIZATION-SUCCEEDED I4 5 Counter AUTHORIZ succeeded.
COUNT-AUTHORIZATION-FAILED I4 5 Counter AUTHORIZ failed.
CREATE-TIME I4 5 Creation time of the participant. Time as time_t value (number of seconds since the epoch (00:00:00 UTC, January 1, 1970)).
RPC-LIBRARY-NAME A128 6 Name of the RPC library of the current user request. If the user is inactive at the time of the request and has not issued a request to be processed by the Broker, no RPC information is displayed.
RPC-PROGRAM-NAME A128 6 Name of the RPC program of the current user request. If the user is inactive at the time of the request and has not issued a request to be processed by the Broker, no RPC information is displayed.
SEQNO I4 7 Unique sequence number of client/server. Can be used with CIS command SHUTDOWN.
APPLICATION-VERSION A16 7 Application version. This field is used internally. It can be set by other Software AG products, which pass this value to the Broker stub via an unpublished control block. The value is the version of the program that calls the Broker stub.
IPV6-ADDRESS A46 8 IPv6 address corresponding to attribute HOST in DEFAULTS=SSL|TCP section of Broker attribute file.
NOTUSED8 A2 8 Alignment.
ARF I1 10
0 Ordinary client or server.
1 Client or server is an Adabas Event Replicator source or target.
SCM I1 10 If ARF=1:
0 Single Conversation Mode was not activated by the client.
1 Single Conversation Mode was activated by the client.
PREFETCH I1 10 If ARF=1 and SCM=1:
0 Server is not prefetching units of work
1 Server is prefetching units of work
ROAMING I1 10
0 Server is not using roaming of conversations.
1 Server is using roaming of conversations.
RPC A5 10
YES Server identified as RPC server.
NO Server identified as ACI server.
UNDEF Server not identified at all.
NOTUSED10 A3 10 Alignment.

CMDLOG_FILTER-OBJECT (Struct INFO_CMDLOG_FILTER)

Field Name Format CIS
Interface
Version
Description / Action
UID A32 5 User ID.
SERVER-CLASS A32 5 Class.
SERVER A32 5 Server.
SERVICE A32 5 Service.
SETTER-UID A32 5 User ID of filter setter.
ENABLED I1 5
1 Enabled
0 Disabled

CONVERSATION-OBJECT (Struct INFO_CV)

Field Name Format CIS
Interface
Version
Description / Action
CONV-ID A16 1 Unique identification of conversation.
SERVER-USER-ID A32 1 User ID of server - corresponds to USER-ID in the ACI. The maximum length of this field is determined by field MAX-UID-LEN in the header. See Common Header Structure for Response Data.
SERVER-P-USER-ID B28 1 Specifies the physical internal unique ID which is used to distinguish between several users with the same user ID. This field is used as a handle i.e. no translation is performed.
SERVER-P-USER-ID-CHAR A28 1 No longer used.
SERVER-TOKEN A32 1 Partner's additional identification - corresponds to TOKEN in the ACI. The maximum length of this field is determined by MAX-TK-LEN in the header. See Common Header Structure for Response Data.
CLIENT-USER-ID A32 1 Owners name. Corresponds to USER-ID in the ACI.
CLIENT-P-USER-ID B28 1 Specifies the physical internal unique ID which is used to distinguish between several users with the same user ID. This field is used as a handle i.e. no translation is performed.
CLIENT-P-USER-ID-CHAR A28 1 No longer used.
CLIENT-TOKEN A32 1 Owner's additional identification - corresponds to TOKEN in the ACI.
SERVER-CLASS A32 1 Server class of Service of Conversation.
SERVER-NAME A32 1 Server name of Service of Conversation. The maximum length of SERVER-CLASS, SERVER-NAME and SERVICE is determined by fields MAX-SC-LEN, MAX-SN-LEN and MAX-SV-LEN in the header. See Common Header Structure for Response Data.
SERVICE A32 1 Service name of Service of Conversation.
CONV-TIME-OUT I4 1 Conversation timeout (corresponds to CONV-NONACT of the service in the attribute file)
LAST-ACTIVE I4 1 Elapsed time since the last activity for this conversation.
TYPE I2 1 Type of conversation:
0 conversational
1 non-conversational
UNUSED1 I2 2 Unused.
LTOTALUOWS I4 2 Number of UOWs.
CLIENT-RPC-LIBRARY-NAME A128 6 Name of the RPC library that was provided by the RPC client at the start of the conversation, that is, the first SEND that contains both RPC library and RPC program is stored in the conversation.
CLIENT-RPC-PROGRAM-NAME A128 6 Name of the RPC program that was provided by the RPC client at the start of the conversation, that is, the first SEND that contains both RPC library and RPC program is stored in the conversation.
SERVER-RPC-LIBRARY-NAME A128 6 Name of the RPC library that was provided by the RPC server with the first response to clients request, that is, the first SEND that contains both RPC library and RPC program is stored in the conversation.
SERVER-RPC-PROGRAM-NAME A128 6 Name of the RPC program that was provided by the RPC server with the first response to clients request, that is, the first SEND that contains both RPC library and RPC program is stored in the conversation.
ARF I1 10
0 Ordinary conversation.
1 Conversation belongs to Adabas Event Replication.
SCM I1 10 If ARF=1:
0 Conversation does not run in Single Conversation Mode.
1 conversation runs in Single Conversation Mode.
PREFETCH I1 10 If ARF=1 and SCM=1:
0 Server is not prefetching units of work.
1 Server is prefetching units of work.
ROAMING I1 10
0 Server is not using roaming of conversations.
1 Server is using roaming of conversations.

NET-OBJECT (Struct INFO_NET)

Field Name Format CIS
Interface
Version
Description / Action
CLONE-INDEX I4 5 Clone index.
STATUS I4 5 Status of communicator. Possible values defined as ETB_INFO_COM_STATUS_.
DBID I2 5 DBID.
SVC-NUMBER I2 5 Adabas SVC number.
IUBL I4 5 Maximum buffer length.
TIME I4 5 MPM-12 timeout.
NABS I4 5 Number of attached buffers.
CQES I4 5 Number of CQEs.
FORCE I1 5 DBID table entry overwrite.
LOCAL I1 5
1 Local node
0 Not local
NOTUSED0 A2 5 Alignment.

POOL-USAGE-OBJECT (Struct INFO_POOL_USAGE)

Field Name Format CIS
Interface
Version
Description / Action
TOTAL-NUM-POOLS I4 7 Number of pools currently allocated.
TOTAL-STORAGE-ALLOCATED I4 7 Size of allocated storage in bytes.
ACCOUNTING-NUM-POOLS I4 7 ACCOUNTING: Number of pools.
ACCOUNTING-SIZE-ALL-POOLS I4 7 ACCOUNTING: Size of all pools in bytes.
ACCOUNTING-SIZE-ONE-POOL I4 7 ACCOUNTING: Size of one pool in bytes.
BLACKLIST-NUM-POOLS I4 7 BLACKLIST: Number of pools.
BLACKLIST-SIZE-ALL-POOLS I4 7 BLACKLIST: Size of all pools in bytes.
BLACKLIST-SIZE-ONE-POOL I4 7 BLACKLIST: Size of one pool in bytes.
BROKER-TO-BROKER-NUM-POOLS I4 7 BROKER-TO-BROKER: Number of pools.
BROKER-TO-BROKER-SIZE-ALL-POOLS I4 7 BROKER-TO-BROKER: Size of all pools in bytes.
BROKER-TO-BROKER-SIZE-ONE-POOL I4 7 BROKER-TO-BROKER: Size of one pool in bytes.
COM-BUFFER-NUM-POOLS I4 7 COM-BUFFER: Number of pools.
COM-BUFFER-SIZE-ALL-POOLS I4 7 COM-BUFFER: Size of all pools in bytes.
COM-BUFFER-SIZE-ONE-POOL I4 7 COM-BUFFER: Size of one pool in bytes.
CMDLOG-NUM-POOLS I4 7 CMDLOG: Number of pools.
CMDLOG-SIZE-ALL-POOLS I4 7 CMDLOG: Size of all pools in bytes.
CMDLOG-SIZE-ONE-POOL I4 7 CMDLOG: Size of one pool in bytes.
CONNECTION-NUM-POOLS I4 7 CONNECTION: Number of pools.
CONNECTION-SIZE-ALL-POOLS I4 7 CONNECTION: Size of all pools in bytes.
CONNECTION-SIZE-ONE-POOL I4 7 CONNECTION: Size of one pool in bytes.
CONVERSATION-NUM-POOLS I4 7 CONVERSATION: Number of pools.
CONVERSATION-SIZE-ALL-POOLS I4 7 CONVERSATION: Size of all pools in bytes.
CONVERSATION-SIZE-ONE-POOL I4 7 CONVERSATION: Size of one pool in bytes.
HEAP-NUM-POOLS I4 7 HEAP: Number of pools.
HEAP-SIZE-ALL-POOLS I4 7 HEAP: Size of all pools in bytes.
HEAP-SIZE-ONE-POOL I4 7 HEAP: Size of one pool in bytes.
MSG-BUFFER-LONG-NUM-POOLS I4 7 MSG-BUFFER-LONG: Number of pools.
MSG-BUFFER-LONG-SIZE-ALL-POOLS I4 7 MSG-BUFFER-LONG: Size of all pools in bytes.
MSG-BUFFER-LONG-SIZE-ONE-POOL I4 7 MSG-BUFFER-LONG: Size of one pool in bytes.
MSG-BUFFER-SHORT-NUM-POOLS I4 7 MSG-BUFFER-SHORT: Number of pools.
MSG-BUFFER-SHORT-SIZE-ALL-POOLS I4 7 MSG-BUFFER-SHORT: Size of all pools in bytes.
MSG-BUFFER-SHORT-SIZE-ONE-POOL I4 7 MSG-BUFFER-SHORT: Size of one pool in bytes.
PARTICIPANT-NUM-POOLS I4 7 PARTICIPANT: Number of pools.
PARTICIPANT-SIZE-ALL-POOLS I4 7 PARTICIPANT: Size of all pools in bytes.
PARTICIPANT-SIZE-ONE-POOL I4 7 PARTICIPANT: Size of one pool in bytes.
PARTICIPANT-EXT-NUM-POOLS I4 7 PARTICIPANT-EXT: Number of pools.
PARTICIPANT-EXT-SIZE-ALL-POOLS I4 7 PARTICIPANT-EXT: Size of all pools in bytes.
PARTICIPANT-EXT-SIZE-ONE-POOL I4 7 PARTICIPANT-EXT: Size of one pool in bytes.
PROXY-QUEUE-NUM-POOLS I4 7 PROXY-QUEUE: Number of pools.
PROXY-QUEUE-SIZE-ALL-POOLS I4 7 PROXY-QUEUE: Size of all pools in bytes.
PROXY-QUEUE-SIZE-ONE-POOL I4 7 PROXY-QUEUE: Size of one pool in bytes.
SERVICE-ATTRIBUTES-NUM-POOLS I4 7 SERVICE-ATTRIBUTES: Number of pools.
SERVICE-ATTRIBUTES-SIZE-ALL-POOLS I4 7 SERVICE-ATTRIBUTES: Size of all pools in bytes.
SERVICE-ATTRIBUTES-SIZE-ONE-POOL I4 7 SERVICE-ATTRIBUTES: Size of one pool in bytes.
SERVICE-NUM-POOLS I4 7 SERVICE: Number of pools.
SERVICE-SIZE-ALL-POOLS I4 7 SERVICE: Size of all pools in bytes.
SERVICE-SIZE-ONE-POOL I4 7 SERVICE: Size of one pool in bytes.
SERVICE-EXT-NUM-POOLS I4 7 SERVICE-EXT: Number of pools.
SERVICE-EXT-SIZE-ALL-POOLS I4 7 SERVICE-EXT: Size of all pools in bytes.
SERVICE-EXT-SIZE-ONE-POOL I4 7 SERVICE-EXT: Size of one pool in bytes.
TIMEOUT-QUEUE-NUM-POOLS I4 7 TIMEOUT-QUEUE: Number of pools.
TIMEOUT-QUEUE-SIZE-ALL-POOLS I4 7 TIMEOUT-QUEUE: Size of all pools in bytes.
TIMEOUT-QUEUE-SIZE-ONE-POOL I4 7 TIMEOUT-QUEUE: Size of one pool in bytes.
TRANSLATION-NUM-POOLS I4 7 TRANSLATION: Number of pools.
TRANSLATION-SIZE-ALL-POOLS I4 7 TRANSLATION: Size of all pools in bytes.
TRANSLATION-SIZE-ONE-POOL I4 7 TRANSLATION: Size of one pool in bytes.
UOW-NUM-POOLS I4 7 UOW: Number of pools.
UOW-SIZE-ALL-POOLS I4 7 UOW: Size of all pools in bytes.
UOW-SIZE-ONE-POOL I4 7 UOW: Size of one pool in bytes.
WORK-QUEUE-NUM-POOLS I4 7 WORK-QUEUE: Number of pools.
WORK-QUEUE-SIZE-ALL-POOLS I4 7 WORK-QUEUE: Size of all pools in bytes.
WORK-QUEUE-SIZE-ONE-POOL I4 7 WORK-QUEUE: Size of one pool in bytes.

PSF-OBJECT (Struct INFO_PSF)

Information about individual UOWs, or groups of UOWs, can be obtained through information services.

Field Name Format CIS
Interface
Version
Description / Action
UOWID A16 2 Unit of work ID.
CONVID A16 2 Conversation ID.
SENDERUID A32 2 Sender user ID.
SENDERTOKEN A32 2 Sender user token
SENDERSERVER A32 2 Sender server name
SENDERCLASS A32 2 Sender server class
SENDERSERVICE A32 2 Sender service name
RECVRUID A32 2 Receiver user ID.
RECVRTOKEN A32 2 Receiver user token
RECVRSERVER A32 2 Receiver server name
RECVRCLASS A32 2 Receiver server class
RECVRSERVICE A32 2 Receiver service name
USERSTATUS A32 2 User status
UWSTATUS I1 2 UOW status:
1 RECEIVED
2 ACCEPTED
3 DELIVERED
4 BACKEDOUT
5 PROCESSED
6 CANCELLED
7 TIMEOUT
8 DISCARDED
CEOC I1 2 End of conversation state:
0 NO
1 YES
CSTORE I1 2 Persistence flag:
0 none
1 off
2 Broker
CUOWSTATSTORE I1 2 Multiplier used to calculate lifetime for the persistent status of a UOW:
255 no persistent status
1-254 valid multiplier values
LEOCREASON I4 2 End of conversation reason code.
LATTEMPTCOUNT I4 2 Attempted delivery count.
LMSQCNT I4 2 Number of messages.
LMSQSIZE I4 2 Total message size.
UWSTATUSLIFETIME A32 2 Status lifetime.
UWCREATETIME A32 2 Pseudo time UOW created. Broker downtimes are subtracted.
UWLIFETIME I4 2 UOW lifetime.
ARF I1 10
0 Ordinary unit of work.
1 Unit of work belongs to Adabas Event Replication.
SCM I1 10 If ARF=1:
0 Unit of work was not created in Single Conversation Mode.
1 Unit of work was created in Single Conversation Mode.
MAX-POSTPONE-ATTEMPTS I4 10 Number of POSTPONE-ATTEMPTS configured for the related service.
REMAINING-POSTPONE-ATTEMPTS I4 10 Remaining attempts moving the UOW to the postpone queue.
POSTPONE-DELAY I4 10 POSTPONE-DELAY in number of seconds configured for the related service.
TIME-BACK-TO-ACCEPTED A32 10 Time when UOW will be taken out of the postpone queue for another processing attempt.
COMMIT-TIME A32 10 Time UOW was committed.
CREATE-TIME A32 10 Time UOW was created.

PSFADA-OBJECT (Struct INFO_PSFADA)

Note:
Some of the fields listed in this table are represented by blanks or zeros under Windows. Such fields will not be displayed under Windows because of this limitation.

Field Name Format CIS
Interface
Version
Description / Action
ADA-INFO-VERS I4 3 Adabas persistent store information services version.
ADA-DBID I4 3 Adabas database ID (DBID) where the store is located.
ADA-FNR I4 3 Adabas file number of the store (FNR).
ADA-FNAME A16 3 Adabas file name of the store.
ADA-FORMAT-TOD A16 3 TOD of persistent store last format in YYYMMDDHHMMSST.
ADA-FORMAT-VERS I4 3 Persistent store format version.
ADA-START-CNT I4 3 Number of times the persistent store has been opened.
ADA-START-TOD A16 3 TOD of persistent store last open in YYYMMDDHHMMSST.
ADA-ATTLEN I4 3 Length of attribute data.
ADA-OID-LEN I4 3 Length of object identifier.
ADA-OID-OFF I4 3 Offset of object identifier.
ADA-ATT-CNT I4 3 Number of attributes in the store.
ADA-OID-CNT I4 3 Number of object identifiers in the store.
ADA-UI-EXTS I4 3 Number of upper index extents of the Adabas file used by the store.
ADA-NI-EXTS I4 3 Number of normal index extents of the Adabas file used by the store.
ADA-AC-EXTS I4 3 Number of address converter extents of the Adabas file used by the store.
ADA-DA-EXTS I4 3 Number of data extents of the Adabas file used by the store.
ADA-INDEX-LVLS I4 3 Number of index levels in the Adabas file used by the store.
ADA-UI-PCT I4 3 Percentage of upper index that has been used by the store.
ADA-NI-PCT I4 3 Percentage of normal index that has been used by the store.
ADA-AC-PCT I4 3 Percentage of address converter that has been used by the store.
ADA-DA-PCT I4 3 Percentage of data area that has been used by the store.
TRACE-LEVEL I2 5 PSTORE trace level.
NOTUSED0 I2 5 Alignment.

PSFCTREE-OBJECT (Struct INFO_PSTCTREE)

Field Name Format CIS
Interface
Version
Description / Action
FORMAT-VERS I4 5 Store version format.
COLD-START-TIME A16 5 YYYYMMDDHHMMSST cold start.
HOT-STARTS I4 5 Hot starts since format.
MSG-DAT-FILE-NAME A256 5 Message data file name.
MSG-DAT-FILE-SIZE I8 5 Message data file size (64-bit).
MSG-IDX-FILE-NAME A256 5 Message index file name.
MSG-IDX-FILE-SIZE I8 5 Message index file size (64-bit).
STATUS-DAT-FILE-NAME A256 5 Status data file name.
STATUS-DAT-FILE-SIZE I8 5 Status data file size (64-bit).
STATUS-IDX-FILE-SIZE A256 5 Status index file name.
STATUS-IDX-FILE-SIZE I8 5 Status index file size (64-bit).
TRACE-LEVEL I2 5 PSTORE trace level.
NOTUSED0 I2 5 Alignment.

PSFDIV-OBJECT (Struct INFO_PSFDIV)

Information services also provide detailed information on the allocation and usage of the various storage pools that implement the z/OS-DIV persistent store. This information can be used to tune the persistent store.

Note:
Persistent store administration was simplified with EntireX version 9.7 and cell pool services are no longer used. Cell pool information is no longer returned in the PSFDIV-OBJECT; all returned fields from DIV-SH-IXMODULUS to DIV-CX-QUERY-RC contain zeros only.

Field Name Format CIS
Interface
Version
Description / Action
DIV-INFO-VERS I4 2 PSD query structure version.
DIV-SH-NAME A8 2 Persistent store name (DATASPACE-NAME in DIV-specific attributes).
DIV-SH-FORMAT-TOD A16 2 TOD of persistent store cold start at YYYYMMDDHHMMSST.
DIV-SH-FORMAT-VERS I4 2 Persistent store format version (PSTORE-VERSION in Broker-specific attributes).
DIV-SH-HWMARK B4 2 Highest address in the data space.
DIV-SH-START-CNT I4 2 Number of times the persistent store has been opened.
DIV-SH-DS-ALET B4 2 ALET (Access List Entry Token) for data space.
DIV-SH-ATT-LEN I4 2 Length of attribute data.
DIV-SH-OID-LEN I4 2 Length of object identifier.
DIV-SH-OID-OFF I4 2 Offset of object identifier.
DIV-SH-IXMODULUS (1) I4 2 Size of array/hash modulus.
DIV-SH-CP-DEF-CNT (1) I4 2 Number of cell pool definitions.
DIV-CP-NAME (1) A8 2 Cell pool name.
DIV-CP-CELL-SIZE (1) I4 2 Cell size.
DIV-CP-CELL-TOTAL (1) I4 2 Total number of cells.
DIV-CP-CELL-AVAIL (1) I4 2 Number of cells available.
DIV-CP-EXTENT-CNT (1) I4 2 Number of cell pool extents.
DIV-CP-QUERY-RC (1) I4 2 Return code from cell pool query.
DIV-CX-STATUS (1) I4 2 Cell pool extent status.
DIV-CX-EXTENT-ADDR (1) B4 2 Address of cell pool extent.
DIV-CX-EXTENT-LEN (1) I4 2 Length of cell pool extent.
DIV-CX-AREA-ADDR (1) B4 2 Address of cell area.
DIV-CX-AREA-LEN (1) I4 2 Length of cell area.
DIV-CX-CELL-TOTAL (1) I4 2 Number of cells in extent.
DIV-CX-CELL-AVAIL (1) I4 2 Number of cells available in extent.
DIV-CX-QUERY-RC (1) I4 2 Return code from cell pool extent query.
TRACE-LEVEL I2 5 PSTORE trace level.
NOTUSED0 I2 5 Alignment.
DIV-CNTLDAT-NUM-POOLS I4 9 Number of CONTROL-DATA pools in data space.
DIV-CNTLDAT-BYTES-PER-SLOT I4 9 Size of one slot in a CONTROL-DATA pool.
DIV-CNTLDAT-ALLOC-SLOTS I4 9 Number of allocated slots in all CONTROL-DATA pools.
DIV-CNTLDAT-FREE-SLOTS I4 9 Number of free slots in all CONTROL-DATA pools.
DIV-CNTLDAT-USED-SLOTS I4 9 Number of used slots in all CONTROL-DATA pools.
DIV-LMSGDAT-NUM-POOLS I4 9 Number of LONG-MESSAGE-DATA pools in data space.
DIV-LMSGDAT-BYTES-PER-SLOT I4 9 Size of one slot in a LONG-MESSAGE-DATA pool.
DIV-LMSGDAT-ALLOC-SLOTS I4 9 Number of allocated slots in all LONG-MESSAGE-DATA pools.
DIV-LMSGDAT-FREE-SLOTS I4 9 Number of free slots in all LONG-MESSAGE-DATA pools.
DIV-LMSGDAT-USED-SLOTS I4 9 Number of used slots in all LONG-MESSAGE-DATA pools.
DIV-SMSGDAT-NUM-POOLS I4 9 Number of SHORT-MESSAGE-DATA pools in data space.
DIV-SMSGDAT-BYTES-PER-SLOT I4 9 Size of one slot in a SHORT-MESSAGE-DATA pool.
DIV-SMSGDAT-ALLOC-SLOTS I4 9 Number of allocated slots in all SHORT-MESSAGE-DATA pools.
DIV-SMSGDAT-FREE-SLOTS I4 9 Number of free slots in all SHORT-MESSAGE-DATA pools.
DIV-SMSGDAT-USED-SLOTS I4 9 Number of used slots in all SHORT-MESSAGE-DATA pools.
DIV-UOWIDX-NUM-POOLS I4 9 Number of UOW index pools in data space.
DIV-UOWIDX-BYTES-PER-SLOT I4 9 Size of one slot in a UOW index pool.
DIV-UOWIDX-ALLOC-SLOTS I4 9 Number of allocated slots in all UOW index pools.
DIV-UOWIDX-FREE-SLOTS I4 9 Number of free slots in all UOW index pools.
DIV-UOWIDX-USED-SLOTS I4 9 Number of used slots in all UOW index pools.

Notes:

  1. Obsolete since EntireX 9.7. Returned field contains zeros only.

RESOURCE-USAGE-OBJECT (Struct INFO_RESOURCE_USAGE)

Field Name Format CIS
Interface
Version
Description / Action
TOTAL-STORAGE-ALLOCATED I4 7 Size of allocated storage in bytes.
TOTAL-STORAGE-ALLOCATED-HIGH I4 7 Highest size of allocated storage in bytes since Broker started.
TOTAL-STORAGE-LIMIT I4 7 Maximum of storage that can be allocated (broker attribute MAX-MEMORY).
ACCOUNTING-BUFFERS-ALLOCATED I4 7 ACCOUNTING: Number of buffers allocated.
ACCOUNTING-BUFFERS-FREE I4 7 ACCOUNTING: Number of buffers free.
ACCOUNTING-BUFFERS-USED I4 7 ACCOUNTING: Number of buffers used.
BLACKLIST-ENTRIES-ALLOCATED I4 7 BLACKLIST: Number of entries allocated.
BLACKLIST-ENTRIES-FREE I4 7 BLACKLIST: Number of entries free.
BLACKLIST-ENTRIES-USED I4 7 BLACKLIST: Number of entries used.
BROKER-TO-BROKER-ENTRIES-ALLOCATED I4 7 BROKER-TO-BROKER: Number of entries allocated.
BROKER-TO-BROKER-ENTRIES-FREE I4 7 BROKER-TO-BROKER: Number of entries free.
BROKER-TO-BROKER-ENTRIES-USED I4 7 BROKER-TO-BROKER: Number of entries used.
COM-BUFFERS-ALLOCATED I4 7 COM-BUFFER: Number of buffers allocated.
COM-BUFFERS-FREE I4 7 COM-BUFFER: Number of buffers free.
COM-BUFFERS-USED I4 7 COM-BUFFER: Number of buffers used.
CMDLOG-FILTER-ENTRIES-ALLOCATED I4 7 CMDLOG-FILTER: Number of entries allocated.
CMDLOG-FILTER-ENTRIES-FREE I4 7 CMDLOG-FILTER: Number of entries free.
CMDLOG-FILTER-ENTRIES-USED I4 7 CMDLOG-FILTER: Number of entries used.
CONNECTION-ENTRIES-ALLOCATED I4 7 CONNECTION: Number of entries allocated.
CONNECTION-ENTRIES-FREE I4 7 CONNECTION: Number of entries free.
CONNECTION-ENTRIES-USED I4 7 CONNECTION: Number of entries used.
CONVERSATION-ENTRIES-ALLOCATED I4 7 CONVERSATION: Number of entries allocated.
CONVERSATION-ENTRIES-FREE I4 7 CONVERSATION: Number of entries free.
CONVERSATION-ENTRIES-USED I4 7 CONVERSATION: Number of entries used.
HEAP-BYTES-ALLOCATED I4 7 HEAP: Number of bytes allocated.
HEAP-BYTES-FREE I4 7 HEAP: Number of bytes free.
HEAP-BYTES-USED I4 7 HEAP: Number of bytes used.
MSG-BUFFER-LONG-ALLOCATED I4 7 MSG-BUFFER-LONG: Number of buffers allocated.
MSG-BUFFER-LONG-FREE I4 7 MSG-BUFFER-LONG: Number of buffers free.
MSG-BUFFER-LONG-USED I4 7 MSG-BUFFER-LONG: Number of buffers used.
MSG-BUFFER-SHORT-ALLOCATED I4 7 MSG-BUFFER-SHORT: Number of buffers allocated.
MSG-BUFFER-SHORT-FREE I4 7 MSG-BUFFER-SHORT: Number of buffers free.
MSG-BUFFER-SHORT-USED I4 7 MSG-BUFFER-SHORT: Number of buffers used.
PARTICIPANT-ENTRIES-ALLOCATED I4 7 PARTICIPANT: Number of entries allocated.
PARTICIPANT-ENTRIES-FREE I4 7 PARTICIPANT: Number of entries free.
PARTICIPANT-ENTRIES-USED I4 7 PARTICIPANT: Number of entries used.
PARTICIPANT-EXT-ENTRIES-ALLOCATED I4 7 PARTICIPANT-EXT: Number of entries allocated.
PARTICIPANT-EXT-ENTRIES-FREE I4 7 PARTICIPANT-EXT: Number of entries free.
PARTICIPANT-EXT-ENTRIES-USED I4 7 PARTICIPANT-EXT: Number of entries used.
PROXY-QUEUE-ENTRIES-ALLOCATED I4 7 PROXY-QUEUE: Number of entries allocated.
PROXY-QUEUE-ENTRIES-FREE I4 7 PROXY-QUEUE: Number of entries free.
PROXY-QUEUE-ENTRIES-USED I4 7 PROXY-QUEUE: Number of entries used.
SERVICE-ATTRIBUTE-ENTRIES-ALLOCATED I4 7 SERVICE-ATTRIBUTE: Number of entries allocated.
SERVICE-ATTRIBUTE-ENTRIES-FREE I4 7 SERVICE-ATTRIBUTE: Number of entries free.
SERVICE-ATTRIBUTE-ENTRIES-USED I4 7 SERVICE-ATTRIBUTE: Number of entries used.
SERVICE-ENTRIES-ALLOCATED I4 7 SERVICE: Number of entries allocated.
SERVICE-ENTRIES-FREE I4 7 SERVICE: Number of entries free.
SERVICE-ENTRIES-USED I4 7 SERVICE: Number of entries used.
SERVICE-EXT-ENTRIES-ALLOCATED I4 7 SERVICE-EXT: Number of entries allocated.
SERVICE-EXT-ENTRIES-FREE I4 7 SERVICE-EXT: Number of entries free.
SERVICE-EXT-ENTRIES-USED I4 7 SERVICE-EXT: Number of entries used.
TIMEOUT-QUEUE-ENTRIES-ALLOCATED I4 7 TIMEOUT-QUEUE: Number of entries allocated.
TIMEOUT-QUEUE-ENTRIES-FREE I4 7 TIMEOUT-QUEUE: Number of entries free.
TIMEOUT-QUEUE-ENTRIES-USED I4 7 TIMEOUT-QUEUE: Number of entries used.
TRANSLATION-ENTRIES-ALLOCATED I4 7 TRANSLATION: Number of entries allocated.
TRANSLATION-ENTRIES-FREE I4 7 TRANSLATION: Number of entries free.
TRANSLATION-ENTRIES-USED I4 7 TRANSLATION: Number of entries used.
UOW-ENTRIES-ALLOCATED I4 7 UOW: Number of entries allocated.
UOW-ENTRIES-FREE I4 7 UOW: Number of entries free.
UOW-ENTRIES-USED I4 7 UOW: Number of entries used.
WORK-QUEUE-ENTRIES-ALLOCATED I4 7 WORK-QUEUE: Number of entries allocated.
WORK-QUEUE-ENTRIES-FREE I4 7 WORK-QUEUE: Number of entries free.
WORK-QUEUE-ENTRIES-USED I4 7 WORK-QUEUE: Number of entries used.

SECURITY-OBJECT (Struct INFO_SECURITY)

Field Name Format CIS
Interface
Version
Description / Action
COUNT-AUTHENTICATION-SUCCEEDED I4 5 Successful authentications.
COUNT-AUTHENTICATION-FAILED I4 5 Failed authentications.
COUNT-AUTHORIZATION-SUCCEEDED I4 5 Successful authorizations.
COUNT-AUTHORIZATION-FAILED I4 5 Failed authorizations.
SAF-PROFILE-LENGTH I4 5 Max profile length (CDT) m/f.
TRACE-LEVEL I2 5 Security trace level.
SECURITY-LEVEL I2 5 Security Level m/f.
AUTHENTICATION-TYPE A8 5 Authentication type.
SAF-CLASS A8 5 SAF profile CLASS (8) m/f.
SECURITY-NODE A8 5 Security node m/f.
INCLUDE-CLASS I1 5 Include CLASS in prof m/f.
INCLUDE-NAME I1 5 Include NAME in prof m/f.
INCLUDE-SERVICE I1 5 Include SERVICE in prof m/f.
UNIVERSAL I1 5 Allow undefined profile m/f.
CHECK-IP-ADDRESS I1 5 Check IP address m/f.
WARN-MODE I1 5 Run in warn mode m/f.
IGNORE-STOKEN I1 5 Ignore ACI STOKEN m/f.
TRUSTED-USER I1 5 Trusted User ID m/f.
PROPAGATE-TRUSTED-USER I1 5 VerifiedId m/f.
PASSWORD-TO-UPPER-CASE I1 5 Convert password to uppercase m/f.
NOTUSED0 A2 5 Alignment.

SERVICE-OBJECT (Struct INFO_SV)

Field Name Format CIS
Interface
Version
Description / Action
SERVER-CLASS A32 1 Name of server class.
SERVER-NAME A32 1 Name of server.
SERVICE A32 1 Name of service. The header contains the maximum length for the SERVER-CLASS, SERVER-NAME and SERVICE fields for all retrieved objects. See Common Header Structure for Response Data.
TRANS A8 1 Name of translation routine used.
CONV-NONACT I4 1 Conversation timeout (corresponds to CONV-NONACT for the service in the attribute file).
SERVER-ACT I4 1 Number of servers active for service. This counter also includes the active Attach Server instances. You may subtract the field ATTACH-MGRS-ACT to calculate the number of ordinary server instances.
CONV-ACT I4 1 Number of conversations active for service.
CONV-HIGH I4 1 Highest number of conversations active for service.
LONG-ACT I4 1 Number of long buffers active (in use) for the service.
LONG-HIGH I4 1 Highest number of long buffers active (in use) for the service.
SHORT-ACT I4 1 Number of short buffers active (in use) for the service.
SHORT-HIGH I4 1 Highest number of short buffers active (in use) for the service.
NUM-WAIT-SERVER I4 1 Number of times a client had to wait for this service or messages from the server.
NUM-SERV-OCC I4 1 Number of times a client request (SEND with CONVID=NEW or NONE) could not be immediately assigned to a waiting server, i.e. all servers offering this service are occupied.
NUM-PEND I4 1 Number of new conversations which are currently in the queue, but not yet assigned to a server (pending).
PEND-HIGH I4 1 Highest number of pending conversations.
REQ-SUM I4 1 Accumulated number of requests (number of SEND commands with CONVID=NEW or NONE).
LMAXUOWS I4 2 Maximum number of active UOWs
LMAXUOWMSG I4 2 Maximum number of messages in a UOW
LUWTIME I4 2 Maximum UOW lifetime
LMAXDELCNT I4 2 Is currently not in use (count is always zero.)
LMAXMSGSIZE I4 2 Maximum size of a message
LTOTALUOWS I4 2 Number of UOWs
CSTORE I1 2 Store attribute for all UOWs:
0=OFF
1=BROKER
CUWSTATP I1 2 UOWstatus lifetime multiplier (0-255)
CDEFERRED I1 2 Default status attribute for all UOWs:
0 NO
1 YES
CENCLEVEL I1 3 Deprecated. For encrypted transport we strongly recommend using the Secure Sockets Layer/Transport Layer Security protocol. See SSL/TLS and Certificates with EntireX.
ATTACH-MGRS-ACT I4 4 Number of attach servers active
LUWSTAT-ADD-TIME I4 4 Unit of work status additional lifetime
NUM-CONV I4 5 Number of conversations.
NUM-SERVER I4 5 Number of servers.
NUM-LONG-MSG-BUFFER I4 5 Number of long message buffers.
NUM-SHORT-MSG-BUFFER I4 5 Number of short message buffers.
CONVERSION A8 5 Name of conversion routine.
CONVERSION-PARMS A255 5 Conversion parameters.
NOTUSED1 A1 5 Alignment.
RESERVED I4 5 Reserved for future use.
ARF I1 10
0 Ordinary service.
1 Service belongs to Adabas Event Replication.
SCM I1 10 If ARF=1:
0 Single Conversation Mode was not activated for this service.
1 Single Conversation Mode was activated for this service.
PREFETCH I1 10 If ARF=1 and SCM=1:
0 Server is not prefetching units of work
1 Server is prefetching units of work
RPC A5 10
YES Server identified as RPC server.
NO Server identified as ACI server.
UNDEF Server not identified at all.
MAX-POSTPONE-ATTEMPTS I4 10 Number of POSTPONE-ATTEMPTS configured for this service.
POSTPONE-DELAY I4 10 POSTPONE-DELAY in number of seconds configured for this service.

SSL-OBJECT (Struct INFO_SSL)

Field Name Format CIS
Interface
Version
Description / Action
CLONE-INDEX I4 5 Clone index.
STATUS I4 5 Status of communicator. Possible values defined as ETB_INFO_COM_STATUS_.
OPEN-CONNECTIONS I4 5 Number of open connections.
MAX-CONNECTIONS I4 5 Maximum number of connections.
PORT-NUMBER I4 5 Port number.
IP-ADDRESS A16 6 IPv4 address corresponding to attribute HOST in DEFAULTS=SSL section of Broker attribute file.
HOST-NAME A256 6 Host name specified using attribute HOST in DEFAULTS=SSL section of Broker attribute file.
TASK-RUNNING I1 8 Transport task running. 0=NO, 1=YES.
IPV6-ADDRESS A46 8 IPV6 address corresponding to attribute HOST in the DEFAULTS=SSL section of the Broker attribute file.

STATISTICS-OBJECT (Struct INFO_STATISTICS) (Excerpt of BROKER-OBJECT)

Field Name Format CIS
Interface
Version
Description / Action
NUM-SERVICE I4 7 Number of services defined (see NUM-SERVER).
SERVICE-ACT I4 7 Number of services active.
NUM-CLIENT I4 7 Number of clients defined (see NUM-CLIENT).
CLIENT-ACT I4 7 Number of clients active.
CLIENT-HIGH I4 7 Highest number of clients active since Broker started.
NUM-SERVER I4 7 Number of servers (see NUM-SERVER).
SERVER-ACT I4 7 Number of servers active. This counter also includes the active Attach Server instances.
SERVER-HIGH I4 7 Highest number of servers active since Broker started.
NUM-CONV I4 7 Number of conversations defined (see NUM-CONVERSATION).
CONV-ACT I4 7 Number of conversations active.
CONV-HIGH I4 7 Highest number of conversations active since Broker started.
NUM-LONG I4 7 Number of long buffers defined (see NUM-LONG-BUFFER).
LONG-ACT I4 7 Number of long buffers active.
LONG-HIGH I4 7 Highest number of long buffers active since Broker started.
NUM-SHORT I4 7 Number of short buffers defined (see NUM-SHORT-BUFFER).
SHORT-ACT I4 7 Number of short buffers active.
SHORT-HIGH I4 7 Highest number of short buffers active since Broker started.

TCP-OBJECT (Struct INFO_TCP)

Field Name Format CIS
Interface
Version
Description / Action
CLONE-INDEX I4 5 Clone index.
STATUS I4 5 Status of communicator ETB_INFO_COM_STATUS_.
OPEN-CONNECTIONS I4 5 Number of open connections.
MAX-CONNECTIONS I4 5 Maximum number of connections. Platform-dependent. See Maximum TCP/IP Connections per Communicator under Broker Resource Allocation.
PORT-NUMBER I4 5 Port number.
IP-ADDRESS A16 6 IPv4 address corresponding to attribute HOST in DEFAULTS=TCP section of Broker attribute file.
HOST-NAME A256 6 Host name specified using attribute HOST in DEFAULTS=TCP section of Broker attribute file.
TASK-RUNNING I1 8 Transport task running. 0=NO, 1=YES.
IPV6-ADDRESS A46 8 IPV6 address corresponding to attribute HOST in the DEFAULTS=TCP section of the Broker attribute file.

UOW-STATISTICS (Struct INFO_UOW_STATISTICS)

Field Name Format CIS Interface Version Description / Action
SERVER-CLASS A32 9 Name of server class.
SERVER-NAME A32 9 Name of server.
SERVICE A32 9 Name of service.
CURRENT-NUMBER-OF-UOWS I8 9 Current number of units of work for this service.
CURRENT-NUMBER-OF-UOW-MESSAGES I8 9 Current number of UOW messages for this service.
CURRENT-NUMBER-OF-BYTES-IN-ALL-UOW-MESSAGES I8 9 Current number of bytes in all UOW messages for this service.
MAX-VALUE-MESSAGES-IN-ONE-UOW I4 9 Max value of 'number of messages in one UOW'.
MAX-VALUE-NUMBER-OF-BYTES-IN-ONE-UOW I4 9 Max value of 'number of bytes in one UOW'.
OLDEST-TIME-OF-UOW-CREATION A32 9 Date and time of the oldest UOW for this service.
NEWEST-TIME-OF-UOW-CREATION A32 9 Date and time of the newest UOW for this service.

USER-OBJECT (Struct INFO_USER)

Field Name Format CIS
Interface
Version
Description / Action
USER-ID A32 7 Corresponds to USER-ID in the ACI. The maximum length of this field is determined by field MAX-UID-LEN in the header. See Common Header Structure.
IS-CLIENT I1 7 Is user a client?
0 NO
1 YES
IS-SERVER I1 7 Is user a server?
0 NO
1 YES
SEQNO I4 7 Unique sequence number of user. Can be used with CIS command SHUTDOWN.
ENDIAN I2 7 Endian type of user's platform:
1 BIG ENDIAN (high order first)
0 LITTLE ENDIAN
CHAR-SET I2 7 Character set of user's platform:
34 EBCDIC IBM
66 EBCDIC SNI
1 ASCII PC 386
16 ASCII PC OS/2
128 ASCII 8859-1
P-USER-ID B28 7 Specifies the physical internal unique ID which is used to distinguish between several users with the same user ID. This field is used as a handle, i.e. no translation is performed. With CIS commands SHUTDOWN PARTICIPANT and SHUTDOWN SERVER, field SEQNO is provided as unique criterion.
TOKEN A32 7 Corresponds to TOKEN in the ACI. The maximum length of this field is determined by MAX-TK-LEN in the header. See Common Header Structure for Response Data.
LAST-ACTIVE I4 7 Elapsed time since the last activity of the user.

WORKER-OBJECT (Struct INFO_WKR)

Field Name Format CIS
Interface
Version
Description / Action
WORKER-ID I2 1 The worker ID is the table number of this worker's worker queue entry.
WORKER-STAT I2 1 Status of worker:
2 ACTIVE
4 STARTED
5 WAITING
CALL-SUM I4 1 Sum of calls per worker since Broker started.
IDLE-SUM I4 1 Sum of idle time per worker since Broker started.

WORKER-USAGE-OBJECT (Struct INFO_WORKER-USAGE)

Field Name Format CIS
Interface
Version
Description / Action
WORKER-MAX-ATTRIBUTE I4 7 Maximum number of worker tasks the Broker can use. See broker attribute WORKER-MAX.
WORKER-MIN-ATTRIBUTE I4 7 Minimum number of worker tasks the Broker can use. See broker attribute WORKER-MIN.
WORKER-NONACT-ATTRIBUTE I4 7 Non-activity time in seconds to elapse before a worker tasks is stopped. See broker attribute WORKER-NONACT.
WORKER-QUEUE-DEPTH I4 7 Number of unassigned user requests in the input queue before another worker task gets started. See broker attribute WORKER-QUEUE-DEPTH.
WORKER-START-DELAY-ATTRIBUTE I4 7 Delay after a successful worker task invocation before another worker task can be started. See broker attribute WORKER-START-DELAY.
LAST-START-TIME I4 7 Time of last worker startup.
LAST-STOP-TIME I4 7 Time of last worker stop.
EFFECTIVE-START-DELAY-SECONDS I4 7 Time value representing the seconds of the timeval structure that contains the effective time consumption starting a worker task.
EFFECTIVE-START-DELAY-MICRO-SECONDS I4 7 Time value representing the microseconds of the timeval structure that contains the effective time consumption starting a worker task.
WORKER-HIGH I4 7 Highest number of worker tasks active since Broker started.
WORKER-LOW I4 7 Lowest number of worker tasks active since Broker started.