This document contains information on setting up the Broker under BS2000. It assumes that you have completed the relevant steps described under Installing EntireX under BS2000. It covers the following topics:
The recommended way to set up the TCP/IP communicator is to define
PORT=nnnn and optionally
HOST=x.x.x.x|hostname under
TCP/IP-specific Attributes.
However, if no port number is specified in the Broker attribute file, the broker kernel will default port number of 1971. This is the same default port number that the stubs use.
To set up EntireX Net-Work communication mechanism
Ensure that appropriate values are supplied in the broker attribute
file section DEFAULTS=NET, paying particular
attention to the IUBL parameter - which
specifies the maximum send/receive buffer length that can be sent between an
application and Broker kernel within a single request - and
NABS, which governs the total amount of storage
available concurrently for all users communicating over this transport
mechanism. See Adabas SVC/Entire Net-Work-specific Attributes.
Ensure that communication with the broker is possible by running the installation verification programs (bcoc, bcos) using transport type NET. See Verifying the Installation of the Broker in the BS2000 Installation documentation.
To start the broker
Enter the following SDF command:
/ENTER-PROCEDURE *LIB(LIB=EXX103.JOBS,ELE=START-BROKER), - /JOB-NAME=ETB,LOGGING=*NO,RESOURCES=*PAR(CPU-LIMIT=*NO)
We recommend using a three-character job name. The job name is taken as
prefix for all subsequently started tasks. Because the job name is limited to
eight characters, a longer job name will overwrite the suffix added by EntireX
Broker. For example: EntireX Broker running with three worker tasks and NET-TCP
communication, JOB-NAME=ETB,
CPU-LIMIT=*NO:
NAME TSN TYPE PRI CPU-USED CPU-MAX ACCOUNT# ETB 5397 2 BATCH 9 255 2.2379 NTL 1 ETBCOM 5398 2 BATCH 9 255 1.3577 NTL 1 ETBWRK00 5399 2 BATCH 9 255 0.8970 NTL 1 ETBWRK01 5400 2 BATCH 9 255 0.7571 NTL 1 ETBWRK02 5401 2 BATCH 9 255 0.7445 NTL 1 ETBTCP00 5402 2 BATCH 9 255 0.6124 NTL 1 ETBTCPPX 5403 2 BATCH 9 255 0.5417 NTL 1 ETBNET00 5404 2 BATCH 9 255 0.6555 NTL 1 ETBTOM 5407 2 BATCH 9 255 6.4044 NTL 1
The properties assigned to the main task (ETB), e.g.
JOB-CLASS, CPU-LIMIT, will be
inherited by all subsequently started tasks. For
CPU-LIMIT, if specified, only *NO
(no time limit) and *STD are inherited.
To stop the broker from a privileged user ID
Enter the following command:
/INFORM-PROGRAM MSG='ETBSTOP',JOB-IDENTIFICATION=*TSN(TSN=tsn)
| where | tsn | is the task number associated with the broker main task (in the example above the TSN of job name ETB) |
All other tasks that were created as a result of starting the broker will be stopped automatically.
To stop the broker from an operator console
Enter the following command:
/INTR tsn,ETBSTOP
| where | tsn | is the task number associated with the broker main task (in the example above the TSN of job name ETB) |
All other tasks that were created as a result of starting the broker will be stopped automatically.
To stop the broker from a non-privileged user ID
Use the S-procedure STOP-BROKER in
EXX103.JOBS
| Startup Parameter | Description | Default | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
BROKER-ID |
Depending on the communication method, the Broker ID can be specified in two different formats:
|
none | ||||||||||||||||||
ADABAS-PARAMETERS |
Adabas parameters used for NET communication method. | ETB-ADAPARM | ||||||||||||||||||
USERID |
If EntireX Broker is running with EntireX Security, a user ID needs to be supplied. | none | ||||||||||||||||||
| PASSWORD | If EntireX Broker is running with EntireX Security, a password needs to be supplied. | none | ||||||||||||||||||
| EXX-LIB | EntireX Broker module library. | EXX103.LIB | ||||||||||||||||||
| EXX-JOBS | EntireX Broker jobs library. | EXX103.JOBS | ||||||||||||||||||
| WAL-MOD | WAL module library. | WAL842.MOD |
Set the broker ID in the PARAMETER-DECLARATION section and
enter following command:
/CALL-PROCEDURE (EXX103.JOBS, STOP-BROKER)
This section covers the following topics:
The Broker TRACE-LEVEL attribute determines the level of
tracing to be performed while Broker is running. The Broker has a master
TRACE-LEVEL specified in the Broker section of
the attribute file as well as several individual
TRACE-LEVEL settings that are specified in the
following sections of the attribute file.
| Individual Settings | Specified in Attribute File Section | Note |
|---|---|---|
| Master trace level | DEFAULTS=BROKER |
1,2 |
| Persistent Store trace level | DEFAULTS=ADABAS |
|
| Conversion trace level | DEFAULTS=SERVICE; Trace option of the service-specific broker attribute CONVERSION.
|
|
| Security trace level | DEFAULTS=SECURITY |
1 |
| Transport trace level | DEFAULTS=NET | TCP |
1 |
| Application Monitoring trace level | DEFAULTS=APPLICATION-MONITORING |
Notes:
TRACE-LEVEL without restarting the Broker, use the Broker command-line utility ETBCMD.
TRACE-LEVEL without restarting the broker, use operator command TRACE.
Trace messages are written to the SYSOUT file of the EntireX Broker common output manager (COM) task.
| Trace Level | Description |
|---|---|
| 0 | No tracing. Default value. |
| 1 | Traces incoming requests, outgoing replies, and resource usage. |
| 2 | All of Trace Level 1, plus all main routines executed. |
| 3 | All of Trace Level 2, plus all routines executed. |
| 4 | All of Trace Level 3, plus Broker ACI control block displays. |
Note:
Trace levels 2 and above should be used only when requested by Software AG Support.
It is not always convenient to run with
TRACE-LEVEL defined, especially when higher
trace levels are involved. Deferred tracing is triggered when a specific
condition occurs, such as an ACI response code or a broker subtask abend. Such
conditions cause the contents of the trace buffer to be written, showing trace
information leading up the specified event. If the specified event does not
occur, the Broker trace will contain only startup and shutdown information
(equivalent to TRACE-LEVEL=0). Operating the
trace in this mode requires the following additional attributes in the broker
section of the attribute file. Values for
TRBUFNUM and
TRAP-ERROR are only examples.
| Attribute | Value | Description |
|---|---|---|
TRBUFNUM |
3 |
Specifies the deferred trace buffer size = 3 * 64 K. |
TRMODE |
WRAP |
Indicates trace is not written until an event occurs. |
TRAP-ERROR |
322 |
Assigns the event ACI response code 00780322 "PSI: UPDATE failed". |
The following methods are available to switch on or off the EntireX Broker trace dynamically. You do not need to restart the broker for the changes to take effect.
ETBCMD
Run command utility ETBCMD with option -c TRACE-ON or - c TRACE-OFF.
See ETBCMD.
Operator Command
Issue an operator command. See TRACE.
See also Deferred Tracing.
An optional feature of EntireX Broker is available to protect a broker
running with SECURITY=YES against
denial-of-service attacks. An application that is running with invalid user
credentials will get a security response code. However, if the process is doing
this in a processing loop, the whole system could be affected. If
PARTICIPANT-BLACKLIST
is set to YES, EntireX Broker maintains a
blacklist to handle such "attacks". If an application causes ten
consecutive security class error codes within 30 seconds, the blacklist handler
puts the participant on the blacklist. All subsequent requests from this
participant are blocked until the
BLACKLIST-PENALTY-TIME
has elapsed.
Here is a scenario illustrating another use of this feature that is not security-related.
An RPC server is to be shut down immediately, using Broker Command and Information
Services (CIS), and has no active request in the broker. The shutdown results
in the LOGOFF of the server. The next request that
the server receives will probably result in message 00020002 "User
does not exist", which will cause the server to reinitialize
itself. It was not possible to inform the server that shutdown was meant to be
performed.
With the blacklist, this is now possible. As long as the blacklist is not switched off, when a server is shut down immediately using CIS and when there is no active request in the broker, a marker is set in the blacklist. When the next request is received, this marker results in message 00100050 "Shutdown IMMED required", which means that the server is always informed of the shutdown.