Message Class 1001 - RPC Protocol

This class indicates an error occurred in the RPC Protocol. Messages of this class have the format:

1001nnnn

where 1001 is the message class, and
nnnn is the message number in the range 0000 - 9999.

Overview of Messages

10010004 | 10010005 | 10010007 | 10010008 | 10010009 | 10010010 | 10010011 | 10010012 | 10010013 | 10010014 | 10010015 | 10010016 | 10010017 | 10010018 | 10010019 | 10010020 | 10010021 | 10010022 | 10010023 | 10010024 | 10010025 | 10010026 | 10010027 | 10010028 | 10010029 | 10010030 | 10010031 | 10010032 | 10010033 | 10010034 | 10010035 | 10010036 | 10010037 | 10010038 | 10010039 | 10010040 | 10010041 | 10010042 | 10010043 | 10010044 | 10010045 | 10010046 | 10010047 | 10010048 | 10010049 | 10010050 | 10010051 | 10010052 | 10010053 | 10010054 | 10010055 | 10010056 | 10010057 | 10010150 | 10010151 | 10010152 | 10010153 | 10010154 | 10010200 | 10010201 | 10010202 | 10010203 | 10010204 | 10010205 | 10010206 | 10010207 | 10010208 | 10010209 | 10010210 | 10010211 | 10010212 | 10010213 | 10010215 | 10010216 | 10010217 | 10010218 | 10010219 | 10010220 | 10012000 | 10012048 | 10012049 | 10012050

10010004 Not enough memory to receive request
Explanation

The RPC server does not have enough memory to receive the client request.

Action

If your server is a Natural RPC Server, increase the MAXBUFF memory parameter.


10010005 Out of memory
Explanation

The RPC server is unable to allocate enough memory to fulfill the request.

Action

Increase the memory resources of your RPC server.


10010007 Internal error [Response <number> from RPC Server]
Explanation

The RPC server returned an internal error. A more specific error <number> may follow.

Action
  1. See the trace on the server and/or client side and contact Software AG Support.

  2. See under error <number> for an explanation and action to take.


10010008 Unknown version
Explanation

This error message is returned in the following situations:

  1. The RPC protocol version you requested is not supported by your RPC server.

  2. The server command is not known.

  3. There is an error in the RPC protocol header.

Action

Depending on the situation above, for

  1. If possible, upgrade your RPC server or use only those data types supported by your RPC server in the IDL file.

  2. See the trace on the server and/or client side and contact Software AG Support.


10010009 Invalid format buffer
Explanation

The format buffer within the RPC protocol could not be parsed.

Action

Contact Software AG Support.


10010010 Invalid value buffer
Explanation

The value buffer within the RPC protocol could not be parsed.

Action

Contact Software AG Support.


10010011 Invalid packet type
Explanation

The packet type shipped with the RPC protocol is not valid.

Action

Contact Software AG Support.


10010012 Authorization or initialization failed
Explanation

One of the following occurred on the RPC server side:

  1. A Natural RPC Server secured by Natural Security denied access because the Natural RPC Security ticket could not be evaluated correctly or is missing.

  2. Initialization of a Natural RPC Server failed.

  3. An EntireX RPC Server for z/OS CICS® secured by CICS security denied the user's request.

Action

Depending on the situation described above, check your security configuration on the server side.


10010013 No match with pattern
Explanation

Natural RPC Server message.

Action

Contact Software AG Support.


10010014 Wrong Version of SYSRPC
Explanation

Natural RPC Server message.

Action

Contact Software AG Support.


10010015 Recursive RPC tried
Explanation

Natural RPC Server message.

Action

Contact Software AG Support.


10010016 Callee not found. [<Software AG IDL File Information>] [<RPC Server Message Appendix>]
Explanation

The RPC server did not find the target customer server program. This message can be appended optionally by IDL information and an RPC Server Message Appendix, where

<Software AG IDL File Information> is either

  • Library=<Library> see library-definition under Software AG IDL Grammar in the IDL Editor documentation
    or

  • Library=<Library>, Program=<Program> see program-definition under Software AG IDL Grammar in the IDL Editor documentation

<RPC Server Message Appendix> depends on the target RPC server, for example:

  • CICS
    For the RPC Server for CICS:

    • RPC Server: CICS program <program> not found.

  • COBOL
    For the RPC Server for Batch (z/OS | BS2000) if configured for COBOL(1), or RPC Server for IMS if configured for COBOL(2):

    • RPC Server: COBOL program <program> not found.

  • PL/I
    For the RPC Server for Batch (z/OS) if configured for PL/I(1) or RPC Server for IMS if configured for PL/I(2):

    • RPC Server: PL/I program <program> not found.

  • Java
    For the RPC Server for Java:

    • RPC Server: java.lang.ClassNotFoundException: <class>

    • RPC Server: Method <method> not found in class <class> (java.lang.NoSuchMethodException: <class>.<method>())

    • etc.

  • C
    For the RPC Server for Batch (BS2000) if configured for C(1), or RPC Server for C:

    • RPC Server: Library <library> not found.

    • RPC Server: Function (Entry Point) <function> not found.

    • RPC Server: Interface Object (Library <library> not found.

    • RPC Server: Interface Object (Entry Point) <function> not found.

    • etc.

Action

Depends on the target RPC server:

  • CICS
    For the RPC Server for CICS: see Locating and Calling the Target Server in the RPC Server for CICS documentation on how to make the RPC server customer code available.

  • COBOL
    For the RPC Server for Batch (z/OS | BS2000) if configured for COBOL(1), or RPC Server for IMS if configured for COBOL(2): see Locating and Calling the Target Server in the z/OS | BS2000  RPC Server documentation on how to make the RPC server customer code available.

  • PL/I
    For the RPC Server for Batch (z/OS) if configured for PL/I(1), or RPC Server for IMS if configured for PL/I(2): see Locating and Calling the Target Server in the Batch | IMS RPC Server documentation on how to make the RPC server customer code available.

  • Java
    The action depends on the <RPC Server Message Appendix> returned. See Generating a Java Server Interface Object under Using the Java Wrapper and entirex.server.packagename in the RPC Server for Java documentation for information.

  • C
    For the RPC Server for Batch (z/OS) if configured for C(1), or RPC Server for C: the action depends on the <RPC Server Message Appendix> returned. See Locating and Calling the Target Server in the respective RPC server documentation on how to make the RPC server customer code available.

  • etc.

Notes:

  1. See marshalling parameter for the RPC Server for Batch (z/OS | BS2000).
  2. See marshalling parameter RPC Server for IMS.

10010017 Reserved for internal use

10010018 Abnormal termination during program execution. Lib=<Library>, Pgm=<Program>[,<Natural Error Info>]
Explanation

The stub or the program/method called by the RPC server ended abnormally. This message can be appended by Natural error information:

[,(Natural Error Info: Program=<NAT Pgm>,Error=<NAT Error>,
                       Line=<NAT Line>,Status=<NAT Status>,Level=<NAT Level>)]
<NAT Pgm>       The Natural Program name which caused the error.
<NAT Error>     The Natural Error number.
<NAT Line>      The Line number within the erroneous program which caused the error.
<NAT Status>    See the Natural documentation.
<NAT Level>     See the Natural documentation.
Action

Correct the program/method called by the RPC server.


10010019 Response from user program out of range
Explanation

The program/method called by the RPC server can return application errors within the range 1 - 9999. The user error is outside of this range.

Action

Check your program/method called by the RPC server and correct the error.


10010020 Reserved for internal use

10010021 Invalid header
Explanation

The header within the RPC protocol is invalid.

Action

See the trace on the server and/or client side and contact Software AG Support.


10010022 Unknown server command
Explanation

The RPC protocol contains an unknown server command.

Action

Contact Software AG Support.


10010023 Stub parameter definition error
Explanation

The parameter definitions within the stub called by the RPC server are different. This error code is typical if clients send data using an older RPC protocol. The code will be detected by the RPC server to adjust its call information.

Action

When working with the Linux or Windows RPC server, no action is required if the error message appears just once per call. Multiple appearances indicate a general problem: re-generate your stubs with the template file server.tpl, compile and link them. If the error persists, contact Software AG Support.


10010024 Parameter out of value range
Explanation

The value range for a parameter is outside the defined range.
Example:
An I1 data type is mapped to a 2-byte integer type in a programming language environment where there is no 1-byte integer type. The range is defined in the interface specification, that is, the IDL file. See Software AG IDL File.
For I1 it is from -127 to 128. The mapping to a 2-byte integer permits a program to set values less than -127 or greater than 128 which is not allowed for I1.

Action

Check the program and correct the error.


10010025 Parameter max len or array bound required
Explanation

This error message is returned in the following situations:

  1. The RPC server cannot handle variable-length data types such as AV, BV and KV without maximum lengths.

  2. The RPC server cannot handle arrays with variable bounds without maximum upper bounds.

Action

Depending on the situation above, for

  1. Specify maximum values for the variable-length data types in the IDL file. See Software AG IDL File.

  2. Specify maximum values for the upper bounds of the array in the IDL file.


10010026 Invalid string buffer
Explanation

Internal error in the string buffer of the RPC protocol.

Action

Contact Software AG Support.


10010027 Parse error
Explanation

The RPC server cannot parse the RPC protocol.

Action

Contact Software AG Support.


10010028 Library not found
Explanation

The RPC server did not find the library or class given in the RPC protocol.

Action

Check your configuration, server programs and stubs and the library name sent by the client.


10010029 Invalid eyecatcher
Explanation

The header of the RPC protocol contains an invalid eyecatcher.

Action

Contact Software AG Support.


10010030 Parameter array bounds overflow
Explanation

An overflow occurs with an unbounded array whose maximum array bounds are determined in the IDL file. See Software AG IDL File.

Action

Check the program and correct the error.


10010031 String buffer item overflow of the RPC protocol
Explanation

Internal error in string buffer.

Action

Contact Software AG Support.


10010032 Reserved for internal use

10010033 Invalid unbounded array
Explanation

During marshalling/unmarshalling on the server side an error occurred when accessing the unbounded array.

Action

One of the following may apply:

  1. The unbounded array was destroyed by your server program. Check the program and correct the error.

  2. An internal error occurred in the RPC server. Contact Software AG Support.


10010034 Unbounded array does not match IDL file
Explanation

The data type and attributes of the unbounded array sent to the server do not match the data type or attributes of the unbounded array within the server stub.

Action

Re-generate, compile and link your server stub using the same IDL file as on the client side.


10010035 Conversation already open
Explanation

The client application issues an open conversation RPC request having the conversation already opened.

Action

Contact Software AG Support.


10010036 Conversation already closed
Explanation

The client application issues a close conversation, close conversation commit or conversational RPC request without having any open conversation.

Action

Contact Software AG Support.


10010037 Non-conv call within open conversation
Explanation

The client application issues a non-conversational RPC request while having an open conversation.

Action

Contact Software AG Support.


10010038 Reserved for internal use

10010039 Error code converted to <encoding>, error code is <error code>
Explanation

The RPC server does not reply in the correct encoding.

  • <encoding> ASCII when the RPC server answers in ASCII but EBCDIC is expected

    EBCDIC when the RPC server answers in EBCDIC but ASCII is expected

  • <error code> The error code replied by the Server.

Action

Check that character conversion is correctly configured for the broker. See Internationalization with EntireX.


10010040 Error code cannot be decoded
Explanation

The receiver of an RPC message (client or server) is not able to understand (decode) the message.
Possible causes:

  • character conversion issues

  • communicating with an incompatible partner (RPC client to ACI)

  • the message is damaged for whatever reason

  • etc.

Except for character conversion issues, the broker is not the cause of this error.

Action
  • Check that character conversion is correctly configured for the broker and the associated components. See Internationalization with EntireX.

  • Check that the server you are communicating with is an RPC server and not, for example, an ACI server.

If the error occurs sporadically, contact Software AG Support.


10010041 Optional parameters not supported by RPC server
Explanation

The RPC server does not support optional parameters. Optional parameters are supported by a Natural RPC Server. EntireX RPC servers do not support optional parameters.

Action

Contact Software AG Support to check whether a newer version of the Natural RPC Server may support the feature.


10010042 Maximum supported depth for Group levels is <level>
Explanation

The maximum level for groups is 99.

Action

Correct your application.


10010043 Change Password not supported by RPC server
Explanation

You tried to use the Change Password feature of the RPC protocol with an RPC server that does not support this feature.

Action

Do not try to change the password with this RPC server.


10010044 Natural RPC client interface object required
Explanation

The IDL you are using contains features which require a Natural client interface object.

Action

Generate a Natural client interface object out of the Software AG IDL File and use it with the RPC client. See Using the Natural Wrapper for the Client Side in the Natural Wrapper documentation.


10010045 CICS ABEND <myabend> was issued
Explanation

This error indicates an application error code. Application error codes enable the RPC server to return customer-invented errors back to the RPC client in a standardized way without defining an error code field in the IDL.

Here the RPC Server for CICS received a CICS ABEND code forced by the application server program using the EXEC CICS ABEND ABCODE(myabend). The ABEND starts with a letter other than "A" and follows the rules for CICS user ABEND codes. The ABEND code (myabend) can be used in the RPC client to gain information about specific application error situations of the server.

For more information see Returning Application Errors.

Action

The error code can be used in RPC clients to test for specific application error codes.


10010046 Inconsistent RPC request or Reliable RPC message
Explanation

The string buffer item "REL" shipped with the RPC protocol is not valid with RPC request.

Action

Contact Software AG Support.


10010047 Invalid value area
Explanation

The value area in the server mapping file could not be parsed. A server mapping file is a Designer file with extension .cvm. See Server Mapping Files for COBOL.

Action

Contact Software AG Support.


10010048 Inconsistent Reliable RPC message
Explanation

The string buffer item "REL" is missing or invalid.

Action

Contact Software AG Support.


10010049 Invalid packet type for Reliable RPC
Explanation

The packet type shipped with the RPC protocol is not valid for the use of reliable RPC. The string buffer item "REL" is not valid for the packet type.

Action

Contact Software AG Support.


10010050 Illegal parameter direction
Explanation

Reliable RPC allows only IDL direction IN parameters.

Action

Update your IDL, i.e. remove any OUT and INOUT parameters, possibly re-generate your interface object and/or update your application, then retry the RPC call.


10010051 RPC request aborted by application program
Explanation

The RPC client communicates with an RPC Server for CICS. The RPC server programmer used EXEC CICS ABEND CANCEL together with RPCUEX01 to abort the RPC server customer code. See Using EXEC CICS ABEND CANCEL under Scenarios and Programmer Information in the RPC Server for CICS documentation.

Action

This is an informational message. How the program continues depends on the application.


10010052 Server mapping not supported by RPC server [ Library <library>, program <program>. ]
Explanation

The RPC server does not support server mapping files (Designer files with extension .cvm). A wrong RPC server was used to execute the RPC request. For <library> see library-definition and for <program> see program-definition under Software AG IDL Grammar in the IDL Editor documentation. The following RPC servers support server mapping files:

Action

Use an RPC server that supports client-side server mapping files.


10010053 Programming language <language> in server mapping not supported by RPC server. [ Library <library>, program <program>. ]
Explanation

The RPC server does not support the programming language (Natural, COBOL etc.) in the server mapping file (Designer file with extension .cvm). For <library> see library-definition and for <program> see program-definition under Software AG IDL Grammar in the IDL Editor documentation. One of the following situations occurred:

  1. At design time with the Designer, a server mapping file containing COBOL mapping was created with COBOL plug-in IDL Extractor for COBOL or COBOL Wrapper (Generate RPC Server). See also Server Mapping Files for COBOL in the Designer documentation.
    At runtime, however, the RPC server used was not a COBOL RPC server.

  2. At design time with the Designer, a server mapping file containing Natural mapping was created with Natural plug-in IDL Extractor for Natural or Natural Wrapper (Generate RPC Server). See also Server Mapping Files for Natural in the Designer documentation.
    At runtime, however, the RPC server used was not a Natural RPC server.

Action

10010054 Interface type <interface-type> in server mapping not supported by RPC server. [ Library <library>, program <program>. ]
Explanation

The interface type in the server mapping (Batch, DFHCOMMAREA, IMS MPP (IMS Connect) etc.) is not supported by the EntireX Adapter or RPC server and/or the platform the RPC server is running on. For <library> see library-definition and for <program> see program-definition under Software AG IDL Grammar in the IDL Editor documentation.

At design time with the Designer, a server mapping file (Designer file with extension .cvm) for COBOL with a specific interface type was created with a COBOL plug-in: IDL Extractor for COBOL or COBOL Wrapper (Generate RPC Server).

To call your server program successfully, the target RPC runtime component used must support the interface type. The table below gives an overview of possible combinations of an interface type and RPC server.

Interface Type of your Server Program z/OS Linux/Windows IBM i BS2000
CICS Batch IMS CICS IPIC CICS ECI CICS Socket Listener IMS Connect AS/400 Batch
CICS with DFHCOMMAREA Calling Convention x     x x x      
CICS with DFHCOMMAREA Large Buffer Interface x         x      
CICS with Channel Container Calling Convention x     x   x      
Batch with Standard Linkage Calling Convention   x x         x x
IMS BMP with Standard Linkage Calling Convention     x            
IMS MPP Message Interface (IMS Connect)             x    
COBOL Converter                  
Action

Probably a user error. For example, a CICS interface type was used with an RPC Server for Batch.


10010055 Sent IDL type N/NU/P/PU too long, RPC server supports <number-of-digits> digits max
Explanation

The length of a numeric IDL type, one of N/NU/P/PU sent by the RPC client is too long for the target programming language and environment where the RPC server is running.

Action

Update your IDL. Re-generate your interface object and/or update your application, then retry the RPC call.


10010056 Configuration issue: For program <program> library <library> the RPC server has a server-side mapping and received a conflicting client-side mapping from the RPC client
Explanation

The RPC client sent a client-side mapping file (Designer file with extension .cvm), but a server-side mapping file (.svm) also still exists in the server mapping container for <library> see library-definition and for <program> see program-definition under Software AG IDL Grammar in the IDL Editor documentation. See Server-side Mapping Files in the RPC server documentation for z/OS (CICS, Batch, IMS) | CICS ECI | IMS Connect | BS2000. Usage of server mapping files is mutually exclusive.

Action

If you migrate server-side mapping files to client side mapping files, you may have forgotten Step 2: Remove the Server-side Mapping Files on Target RPC Server. See Migrating Server Mapping Files under Server Mapping Files for COBOL in the Designer documentation.


10010057 Version mismatch: For program <program> (library <library>) the RPC server found the unsupported version <cvm-version> in the server mapping
Explanation

The server mapping for the IDL library and IDL program contained a server mapping version not supported by the RPC server. A server mapping file is a Designer file with extension .cvm. See Server Mapping Files for COBOL.

Action

Contact Software AG Support for RPC server upgrade.


10010150 Format Buffer Check: direction does not match. Request of IDL field (<type-length>), location=<location>
Explanation

The EntireX RPC server detected an inconsistency between the deployed server-side mapping (see Server Mapping Files for COBOL in the Designer documentation) and the IDL file with which the RPC client was built. The direction-attribute (IN, OUT, INOUT) of a parameter (see attribute-list under Software AG IDL Grammar in the IDL Editor documentation) defined in the IDL file is different to the direction-attribute in the related server-side mapping.

Possible causes:

  • You are calling an existing COBOL server and have reextracted the IDL and server-side mapping without redeploying the server-side mapping file. See Scenario Calling an Existing COBOL Server under z/OS (CICS, Batch, IMS) | BS2000, and Server Mapping Deployment Wizard in the Designer documentation.

  • You are writing a new COBOL server and have rebuilt the RPC server with a modified IDL file using the COBOL Wrapper, which updates the server-side mapping file, but the updated server-side mapping file is not redeployed. See Scenario Writing a New COBOL Server under z/OS (CICS, Batch, IMS) | BS2000, and and Server Mapping Deployment Wizard in the Designer documentation.

  • etc.

The message provides additional information such as <type-length> and <location>, where

  • <type-length> matches the IDL data type; see IDL Data Types

  • <location> contains the hierarchy of IDL nodes, separated by a colon

Example: IDL field (NU14.0), location=3.2.1.

The IDL below was used for the RPC call. The location is interpreted as follows:

  • third field on level 1 is 'G-parameter-3-on-level-1'

  • second parameter on level 2 is the array 'G-parameter-32-on-level-2'

  • first field on level 3, which is 'G-parameter-322-on-level-3', produced the error

. . .
define data parameter
1 G-parameter-1-on-level-1       (A10) In
1 G-parameter-2-on-level-1             In
1 G-parameter-3-on-level-1             Out
   2 G-parameter-31-on-level-2
      3 G-parameter-311-on-level-3 (A5)
      3 G-parameter-312-on-level-3 (N8)
      3 G-parameter-313-on-level-3 (NU4)
   2 G-parameter-32-on-level-2    (/25)
      3 G-parameter-322-on-level-3 (NU14)
      3 G-parameter-321-on-level-3 (A5)
1 G-parameter-4-on-level-1      (A64)
. . .
end-define
Action

Make sure the IDL file and the deployed server-side mapping file are consistent. Possibly redeploy the server-side mapping file. If the problem persists, reextract or rewrap and then redeploy.


10010151 Format Buffer Check: data type does not match. Request of IDL field (<type-length>), location=<location>
Explanation

The EntireX RPC server detected an inconsistency between the deployed server-side mapping (see Server Mapping Files for COBOL in the Designer documentation) and the IDL file with which the RPC client was built. The sequence of IDL data types (see IDL Data Types in the IDL Editor documentation) defined in the IDL file is different to the sequence in the related server-side mapping. See error message 10010150 for possible causes of this situation and additional information for <type-length> and <location>.

Action

Make sure the IDL file and the deployed server-side mapping file are consistent. Possibly redeploy the server-side mapping file. If the problem persists, reextract or rewrap and then redeploy.


10010152 Format Buffer Check: length is not equal. Request of IDL field (<type-length>), location=<location>
Explanation

The EntireX RPC server detected an inconsistency between the deployed server-side mapping (see Server Mapping Files for COBOL in the Designer documentation) and the IDL file with which the RPC client was built. The length definition of a parameter (see simple-parameter-definition under Software AG IDL Grammar in the IDL Editor documentation) defined in the IDL file is different to the length definition in the related server-side mapping. See error message 10010150 for possible causes of this situation and additional information for <type-length> and <location>.

Action

Make sure the IDL file and the deployed server-side mapping file are consistent. Possibly redeploy the server-side mapping file. If the problem persists, reextract or rewrap and then redeploy.


10010153 Format Buffer Check: attributes not matching. Request of IDL field (<type-length>), location=<location>
Explanation

The EntireX RPC server detected an inconsistency between the deployed server-side mapping (see Server Mapping Files for COBOL in the Designer documentation) and the IDL file with which the RPC client was built. The attributes of a parameter (see attribute-list under Software AG IDL Grammar in the IDL Editor documentation) defined in the IDL file are different to the attributes in the related server-side mapping. See error message 10010150 for possible causes of this situation and additional information for <type-length> and <location>.

Action

Make sure the IDL file and the deployed server-side mapping file are consistent. Possibly redeploy the server-side mapping file. If the problem persists, reextract or rewrap and then redeploy.


10010154 Format Buffer Check: indices not matching. Request of IDL field (<type-length>), location=<location>
Explanation

The EntireX RPC server detected an inconsistency between the deployed server-side mapping (see Server Mapping Files for COBOL in the Designer documentation) and the IDL file with which the RPC client was built. Either the number of dimensions (one-, two- three-dimensional) or the upper bounds (see array-definition) do not match. See error message 10010150 for possible causes of this situation and additional information for <type-length> and <location>.

Action

Make sure the IDL file and the deployed server-side mapping file are consistent. Possibly redeploy the server-side mapping file. If the problem persists, reextract or rewrap and then redeploy.


10010200 RPC Parameter Error: data not unsigned numeric. <direction> of IDL field [<parameter-name>] (<type-length>), location=<location>
Explanation

An application parameter cannot be processed because its content does not match the expected format unsigned numeric (NU). See IDL Data Types.

The message provides additional information such as <direction>, <parameter-name>, <type-length> and <location>, where

  • <direction> is either 'Request' if the error was detected before the RPC server was executed, or 'Reply' for the answer, that is, if the RPC server was already executed.

  • <parameter-name> is available for target programming language C only

  • <type-length> matches the IDL data type; see IDL Data Types

  • <location> contains the hierarchy of IDL nodes, separated by a colon. If an IDL node is an array, its indexes are given in parentheses.

Example: Reply of IDL field (NU14.0), location=3.2(I=5).1.

The IDL below was used for the RPC call. The location is interpreted as follows:

  • third field on level 1 is 'G-parameter-3-on-level-1'

  • second parameter on level 2 is the array 'G-parameter-32-on-level-2' and (I=5) means the fifth occurrence

  • first field on level 3, which is 'G-parameter-322-on-level-3', produced the error

. . .
define data parameter
1 G-parameter-1-on-level-1       (A10) In
1 G-parameter-2-on-level-1             In
1 G-parameter-3-on-level-1             Out
   2 G-parameter-31-on-level-2
      3 G-parameter-311-on-level-3 (A5)
      3 G-parameter-312-on-level-3 (N8)
      3 G-parameter-313-on-level-3 (NU4)
   2 G-parameter-32-on-level-2    (/25)
      3 G-parameter-322-on-level-3 (NU14)
      3 G-parameter-321-on-level-3 (A5)
1 G-parameter-4-on-level-1      (A64)
. . .
end-define
Action

Make sure the IDL file and, if it exists, the server-side mapping file and your server application are consistent. See Server Mapping Files for COBOL in the Designer documentation. Check your application for parameter integrity.


10010201 RPC Parameter Error: data not signed numeric. <direction> of IDL field [<parameter-name>] (<type-length>), location=<location>
Explanation

An application parameter cannot be processed because its content does not match the expected format signed numeric (N). See IDL Data Types.

The additional information <direction>, <parameter-name>, <type-length> and <location> is explained under error message 10010200.

Action

Make sure the IDL file and, if it exists, the server-side mapping file and your server application are consistent. See Server Mapping Files for COBOL in the Designer documentation. Check your application for parameter integrity.


10010202 RPC Parameter Error: data not numeric. <direction> of IDL field [<parameter-name>] (<type-length>), location=<location>
Explanation

An application parameter cannot be processed because its content does not match the expected format unsigned numeric (NU) or signed numeric (N). See IDL Data Types.

The additional information <direction>, <parameter-name>, <type-length> and <location> is explained under error message 10010200.

Action

Make sure the IDL file and, if it exists, the server-side mapping file and your server application are consistent. See Server Mapping Files for COBOL in the Designer documentation. Check your application for parameter integrity.


10010203 RPC Parameter Error: data not unsigned packed. <direction> of IDL field [<parameter-name>] (<type-length>), location=<location>
Explanation

An application parameter cannot be processed because its content does not match the expected format unsigned packed (PU). See IDL Data Types.

The additional information <direction>, <parameter-name>, <type-length> and <location> is explained under error message 10010200.

Action

Make sure the IDL file and, if it exists, the server-side mapping file and your server application are consistent. See Server Mapping Files for COBOL in the Designer documentation. Check your application for parameter integrity.


10010204 RPC Parameter Error: data not signed packed. <direction> of IDL field [<parameter-name>] (<type-length>), location=<location>
Explanation

An application parameter cannot be processed because its content does not match the expected format signed packed (P). See IDL Data Types.

The additional information <direction>, <parameter-name>, <type-length> and <location> is explained under error message 10010200.

Action

Make sure the IDL file and, if it exists, the server-side mapping file and your server application are consistent. See Server Mapping Files for COBOL in the Designer documentation. Check your application for parameter integrity.


10010205 RPC Parameter Error: data not packed. <direction> of IDL field [<parameter-name>] (<type-length>), location=<location>
Explanation

An application parameter cannot be processed because its content does not match the expected format unsigned packed (PU) or signed packed (P). See IDL Data Types.

The additional information <direction>, <parameter-name>, <type-length> and <location> is explained under error message 10010200.

Action

Make sure the IDL file and, if it exists, the server-side mapping file and your server application are consistent. See Server Mapping Files for COBOL in the Designer documentation. Check your application for parameter integrity.


10010206 RPC Parameter Error: I1 < MIN. <direction> of IDL field [<parameter-name>] (<type-length>), location=<location>
Explanation

An application parameter of IDL type I1 cannot be processed because its content is less than the allowed minimum (-128) for I1. See IDL Data Types.

The additional information <direction>, <parameter-name>, <type-length> and <location> is explained under error message 10010200.

Action

Make sure the IDL file and, if it exists, the server-side mapping file and your server application are consistent. See Server Mapping Files for COBOL in the Designer documentation. Check your application for parameter integrity.


10010207 RPC Parameter Error: I1 > MAX. <direction> of IDL field [<parameter-name>] (<type-length>), location=<location>
Explanation

An application parameter of IDL type I1 cannot be processed because its content is greater than the allowed maximum (+127) for I1. See IDL Data Types.

The additional information <direction>, <parameter-name>, <type-length> and <location> is explained under error message 10010200.

Action

Make sure the IDL file and, if it exists, the server-side mapping file and your server application are consistent. See Server Mapping Files for COBOL in the Designer documentation. Check your application for parameter integrity.


10010208 RPC Parameter Error: I2 < MIN. <direction> of IDL field [<parameter-name>] (<type-length>), location=<location>
Explanation

An application parameter of IDL type I2 cannot be processed because its content is less than the allowed minimum (-32768) for I2. See IDL Data Types.

The additional information <direction>, <parameter-name>, <type-length> and <location> is explained under error message 10010200.

Action

Make sure the IDL file and, if it exists, the server-side mapping file and your server application are consistent. See Server Mapping Files for COBOL in the Designer documentation. Check your application for parameter integrity.


10010209 RPC Parameter Error: I2 > MAX. <direction> of IDL field [<parameter-name>] (<type-length>), location=<location>
Explanation

An application parameter of IDL type I2 cannot be processed because its content is greater than the allowed maximum (+32767) for I2. See IDL Data Types.

The additional information <direction>, <parameter-name>, <type-length> and <location> is explained under error message 10010200.

Action

Make sure the IDL file and, if it exists, the server-side mapping file and your server application are consistent. See Server Mapping Files for COBOL in the Designer documentation. Check your application for parameter integrity.


10010210 RPC Parameter Error: I4 < MIN. <direction> of IDL field [<parameter-name>] (<type-length>), location=<location>
Explanation

An application parameter of IDL type I4 cannot be processed because its content is less than the allowed minimum (-2147483648) for I4. See IDL Data Types.

The additional information <direction>, <parameter-name>, <type-length> and <location> is explained under error message 10010200.

Action

Make sure the IDL file and, if it exists, the server-side mapping file and your server application are consistent. See Server Mapping Files for COBOL in the Designer documentation. Check your application for parameter integrity.


10010211 RPC Parameter Error: I4 > MAX. <direction> of IDL field [<parameter-name>] (<type-length>), location=<location>
Explanation

An application parameter of IDL type I2 cannot be processed because its content is greater than the allowed maximum (+2147483647) for I2. See IDL Data Types.

The additional information <direction>, <parameter-name>, <type-length> and <location> is explained under error message 10010200.

Action

Make sure the IDL file and, if it exists, the server-side mapping file and your server application are consistent. See Server Mapping Files for COBOL in the Designer documentation. Check your application for parameter integrity.


10010212 RPC Parameter Error: float < MIN. <direction> of IDL field [<parameter-name>] (<type-length>), location=<location>
Explanation

An application parameter of IDL type F4 cannot be processed because its content is less than the allowed minimum (1.175494351e-38F) for F4. See IDL Data Types.

The additional information <direction>, <parameter-name>, <type-length> and <location> is explained under error message 10010200.

Action

Make sure the IDL file and, if it exists, the server-side mapping file and your server application are consistent. See Server Mapping Files for COBOL in the Designer documentation. Check your application for parameter integrity.


10010213 RPC Parameter Error: float > MAX. <direction> of IDL field [<parameter-name>] (<type-length>), location=<location>
Explanation

An application parameter of IDL type F4 cannot be processed because its content is greater than the allowed maximum (3.402823466e+38F) for F4. See IDL Data Types.

The additional information <direction>, <parameter-name>, <type-length> and <location> is explained under error message 10010200.

Action

Make sure the IDL file and, if it exists, the server-side mapping file and your server application are consistent. See Server Mapping Files for COBOL in the Designer documentation. Check your application for parameter integrity.


10010215 RPC Parameter Error: float HUGE_VAL. <direction> of IDL field [<parameter-name>] (<type-length>), location=<location>
Explanation

An application parameter of IDL type F4 cannot be processed because of conversation error HUGE_VAL (see C library strtod() for more information). The additional information <direction>, <parameter-name>, <type-length> and <location> is explained under error message 10010200.

Action

Make sure the IDL file and, if it exists, the server-side mapping file and your server application are consistent. See Server Mapping Files for COBOL in the Designer documentation. Check your application for parameter integrity.


10010216 RPC Parameter Error: double < MIN. <direction> of IDL field [<parameter-name>] (<type-length>), location=<location>
Explanation

An application parameter of IDL type F8 cannot be processed because its content is less than the allowed minimum (2.2250738585072014e-308) for F8. See IDL Data Types.

The additional information <direction>, <parameter-name>, <type-length> and <location> is explained under error message 10010200.

Action

Make sure the IDL file and, if it exists, the server-side mapping file and your server application are consistent. See Server Mapping Files for COBOL in the Designer documentation. Check your application for parameter integrity.


10010217 RPC Parameter Error: double > MAX. <direction> of IDL field [<parameter-name>] (<type-length>), location=<location>
Explanation

An application parameter of IDL type F8 cannot be processed because its content is greater than the allowed maximum (1.7976931348623158e+308) for F8. See IDL Data Types.

The additional information <direction>, <parameter-name>, <type-length> and <location> is explained under error message 10010200.

Action

Make sure the IDL file and, if it exists, the server-side mapping file and your server application are consistent. See Server Mapping Files for COBOL in the Designer documentation. Check your application for parameter integrity.


10010218 RPC Parameter Error: double exponent over-, underflow. <direction> of IDL field [<parameter-name>] (<type-length>), location=<location>
Explanation

An application parameter of IDL type F4 or F8 cannot be processed because of exponent over- or underflow. See IDL Data Types.

The additional information <direction>, <parameter-name>, <type-length> and <location> is explained under error message 10010200.

Action

Make sure the IDL file and, if it exists, the server-side mapping file and your server application are consistent. See Server Mapping Files for COBOL in the Designer documentation. Check your application for parameter integrity.


10010219 RPC Parameter Error: bad vdata provided. <direction> of IDL field [<parameter-name>] (<type-length>), location=<location>
Explanation

An application parameter of IDL type AV, BV, KV or UV cannot be processed because incorrect data was applied, see Using Variable-length Data Types AV, BV, KV and UV.

The additional information <direction>, <parameter-name>, <type-length> and <location> is explained under error message 10010200.

Action

Make sure the IDL file and, if it exists, the server-side mapping file and your server application are consistent. See Server Mapping Files for COBOL in the Designer documentation. Check your application for parameter integrity.


10010220 RPC Parameter Error: bounds exceeds maximum. <direction> of IDL field [<parameter-name>] (<type-length>), location=<location>
Explanation

An index of an application parameter for an IDL unbounded-array (see array-definition under Software AG IDL Grammar in the IDL Editor documentation) cannot be processed because its value exceeds the maximum for upper bound The additional information <direction>, <parameter-name>, <type-length> and <location> is explained under error message 10010200.

Action

Make sure the IDL file and, if it exists, the server-side mapping file and your server application are consistent. See Server Mapping Files for COBOL in the Designer documentation. Check your application for parameter integrity.


10012000 Reserved for internal use

10012048 Reserved for internal use

10012049 Reserved for internal use

10012050 Reserved for internal use