Message Class 0079 - EntireX ACI - Error in Broker Stub

This message class indicates a problem in the Broker stub being used and may be reported by the stub or Broker. Examine the error number and make a correction. Then restart the application. The messages have the format:

0079nnnn

where 0079 is the message class, and
nnnn is the message number in the range 0000 - 9999

Overview of Messages

00790072 | 00790122 | 00790105 | 00790124 | 00790130 | 00790131 | 00790175 | 00790202 | 00790170 | 00790204 | 00790205 | 00790206 | 00790207 | 00790209 | 00790214 | 00790219 | 00790225 | 00790227 | 00790233 | 00790234 | 00790341 | 00790382 | 00790571 | 00790819 | 00790820 | 00790821 | 00790822 | 00790823 | 00790824 | 00790825 | 00790910
00790072 STUB: Missing API Terminator Char(.)
Explanation

This is a problem with the Broker stub used by the application. The stub did not send the Broker call in the correct internal format.

Action

Ensure that the correct version of the Broker stub is being used. Check the log data set for an image of the internal format. Examine this string for the user issuing the call.

00790122 STUB: Invalid :1: value
Explanation

An invalid value is provided in the ACI field :1:.
Action

Correct the value supplied in ACI field :1:.
00790105 STUB: Invalid extension data offset
Explanation

The address of send buffer plus send buffer length is out of range.
Action

Correct data for Broker call.
00790124 STUB: Invalid :1: size
Explanation

The size of ACI field :1: is out of range. This might indicate a transport problem.

Action

Check the value supplied in ACI field :1:. Contact Software AG Support if needed.
00790130 STUB: Invalid size of REQ STRING value
Explanation

An internal protocol error has occurred between ACI and EntireX Broker or transmission has been corrupted.

Action

Contact Software AG Support.
00790131 STUB: Invalid size of REQ STRING key
Explanation

An internal protocol error has occurred between ACI and EntireX Broker or transmission has been corrupted.

Action

Contact Software AG Support.
00790175 STUB: Must utilize Natural Version >= 4
Explanation

The mainframe Assembler stub supports only Natural Version 4 and above.
Action

Use Natural Version 4 or above.
00790202 STUB: Error in SPFX Length
Explanation

This is a problem with the Broker stub used by the application. The stub has not sent the EntireX Broker call in the correct internal format.

Action

Ensure that the version of the Broker stub being used matches the version of the Broker you are accessing. Check the log data set for an image of the internal format. Examine this string for the user issuing the call.

00790170 STUB: Received data greater than RETL
Explanation

An internal inconsistency in the response from the EntireX Broker has been detected: the size of the received data is greater than the return length, that is, the length of the data returned from the application.

Action

Contact Software AG Support.
00790204 STUB: Broker response not recognized
Explanation

The stub received a reply that indicates an invalid sender. The received data is rejected.
Action

The BROKER-ID is probably invalid. The addressee does not support the communication protocol of the Broker.

00790205 STUB: Invalid SPFX Offsets
Explanation

This is a problem with the Broker stub used by the application. The stub did not send the EntireX Broker call in the correct internal format.

Action

Ensure that the Broker stub being used is the correct one. Check the log data set for an image of the internal format. Examine this string for the user issuing the call.

00790206 STUB: Offset Does not Point to Data
Explanation

This is a problem with the Broker stub used by the application. The stub did not send the EntireX Broker call in the correct internal format.

Action

Check that the Broker stub being used is the correct one. Check the log data set for an image of the internal format. Examine this string for the user issuing the call.

00790207 STUB: No request or reply buffer
Explanation

This is a problem with the Broker stub used by the application. The stub did not send the EntireX Broker call in the correct internal format.

Action

Check that the Broker stub being used is the correct one. Check the log data set for an image of the internal format. Examine this string for the user issuing the call.

00790209 STUB: Nothing Returned From Broker
Explanation

The Broker returned an invalid internal format to the caller. The length of the returned string is not positive.

Action

Contact Software AG Support.
00790214 STUB: Work Space Allocation Failed
Explanation

The EntireX Broker stub cannot allocate the storage needed as a work area.

Action

If you are using a Natural application in a mainframe environment, try to reduce or remove Natural buffers from the Natural space management. Refer to the appropriate Natural Operations documentation for valid Natural buffer profile parameters such as ASIZE, CSIZE, DSIZE. When issuing the first call from any mainframe Natural platform, a buffer of 33K must be available within Natural space management.

00790219 EXEC CICS LINK PGM=pgm_name RESP=resp/resp2
Explanation

Under CICS, the broker stub received a CICS error=RESP/RESP2 while calling the CICS routine pgm_name (normally ADACICS).

Action

Check the CICS documentation for the meaning of the response codes.
00790225 SPFX Reply Buffer Overflow
Explanation

The reply string could not be generated due to an internal buffer overflow.

Action

Contact Software AG Support.
00790227 SPFX Unknown Binary field
Explanation

The Broker kernel has received a command string that contains unknown binary field extensions.

Action

Contact Software AG Support.
00790233 STUB: problem with SPFX total length
Explanation

The message from EntireX Broker does not contain the necessary protocol information.

Action

Contact Software AG Support.
00790234 Invalid binary field length
Explanation

EntireX Broker received a request with invalid binary protocol parts.
Action

Contact Software AG Support.
00790341 STUB: Transport cannot be initialized
Explanation

The components (e.g. OpenSSL libraries for SSL transport) are not fully available. Therefore, the desired transport in the Broker stub cannot be initialized. Under z/OS, the most likely causes of this are:

  1. The application is running on a version of z/OS below z/OS 1.6.

  2. The Language Environment POSIX runtime option has the value OFF.
Action

Use an alternative transport mechanism or make the missing components available.
00790382 STUB: Unable to load or call Broker Stub
Explanation

Broker stub could not be loaded.
Action

Check environment variable ETBLNK. It should specify the full path name of the broker stub.

00790571 STUB: Invalid IBM LE version
Explanation

The stub requires a higher z/OS version.
Action

See z/OS Prerequisites for supported versions.

00790819 STUB: C-Stub Module could not be loaded
Explanation

z/VSE: Module BROKERB could not be loaded.
Action

Check assignment of EXX library.
00790820 STUB: LE Initialization failed
Explanation

z/VSE: IBM Language Environment initialization failed.
Action

Check LE messages.
00790821 STUB: LE Termination failed
Explanation

z/VSE: IBM Language Environment termination failed.
Action

Check LE messages.
00790822 STUB: BPX1SDD (set_dub_default) failed
Explanation

z/OS: Execution of BPX1SDD failed.
The BPX1SDD is used to make subtasks processes.

Action

Check additional return code and reason code.
See z/OS UNIX System Services Messages and Codes for a detailed description.

00790823 STUB: Unable to load ADABAS link routine
Explanation

BS2000, z/OS, z/VSE: The Adabas link routine is loaded dynamically. However, the stub was unable to load the Adabas link routine.
Action

Assign the Adabas load library.
00790824 STUB: ADABAS entry unresolved
Explanation

Under z/OS, the Adabas link routine is loaded dynamically. However, the stub was unable to load the Adabas link routine.
Action

Assign the Adabas load library to the STEPLIB chain.
00790825 STUB: Cannot call BROKER2. Check STEPLIB
Explanation

The stub BROKER cannot load module BROKER2.
Action

Add the EXX load library with module BROKER2 to the STEPLIB chain and rerun the application.

00790910 PSTORE: UOW already exists
Explanation

The PSTORE write operation cannot write a unit of work because this UOW already exists.
Action

Turn on Broker log level 4 and rerun the application. Send the resulting Broker log to Software AG Support.