Natural System Error Messages 2800-2849

NAT2800: The file entered is not accessible.

Text

The file entered is not accessible.

Explanation

Adabas was unable to gain access to a file. Probable reasons are:
- file not in data base; or
- authorization level too low to gain access; or
- file is locked.

Action

Correct error and retry.

NAT2801: File must be regenerated.

Text	File must be regenerated.
Explanation	The defined Adabas file is not equivalent to the Adabas FDT. Regenerate the Adabas file or change the file definition in Predict.
Action	Regenerate the file.

NAT2802: MODULES/REPORTS do not belong to a PROGRAM.

Text

MODULES/REPORTS do not belong to a PROGRAM.

Explanation

The subobject entered does not belong to any object. This message is
issued when, for example, a report declared in the dictionary has no
relation to any program.

NAT2803: From-date greater than to-date.

Text	From-date greater than to-date.
Explanation	The specified to-date must always be greater than from-date.
Action	Check entered dates and correct error.

NAT2804: Physical/logical file for userview does not exist.

Text	Physical/logical file for userview does not exist.
Explanation	No physical or logical file for a userview exists.
Action	Create a physical or logical file.

NAT2805: Execution of program stopped with PF-key.

Text	Execution of program stopped with PF-key.
Explanation	The execution of the program has been stopped with a PF-key.

NAT2806: Phys. VSAM file for incorporate LOGICAL VSAM file does not exist.

Text

Phys. VSAM file for incorporate LOGICAL VSAM file does not exist.

Explanation

The physical VSAM file (FILE-TYPE "V") must be defined in the dictionary
before the related LOGICAL VSAM file (FILE-TYPE "L") can be
incorporated.

Action

Define or INCORPORATE physical VSAM file.

NAT2807: File does not exist.

Text	File does not exist.
Explanation	An attempt was made to RECOVER a non-existent file. Please enter the correct name of the file which is to be recovered.
Action	Enter a valid file name.

NAT2808: File cannot be recovered.

Text	File cannot be recovered.
Explanation	The file is intact. No inconsistencies were detected; therefore, no RECOVER is permitted/necessary.
Action	Do not RECOVER intact files.

NAT2809: Subobjects having no related objects listed successfully.

Text

Subobjects having no related objects listed successfully.

Explanation

At RETRIEVAL, The sub-objects which have no relation to an object
were listed, for example: all files which have no related database
are listed.

NAT2810: All sub-objects have related objects.

Text

All sub-objects have related objects.

Explanation

At RETRIEVAL, all subobjects,which do not have any related objects
were requested. No subobjects met the required condition. For example:
all files defined in the dictionary have a relation to a report or a
module.

NAT2811: All objects have related subobjects.

Text

All objects have related subobjects.

Explanation

At RETRIEVAL, all objects that do not have any subobjects were
requested. No object met the condition. For example: all programs have
reports and/or modules.

NAT2812: The object entered has no subobjects.

Text

The object entered has no subobjects.

Explanation

In a RETRIEVAL, an object"s subobjects were requested. This message
informes the user that the object has no sub-objects, for example:
that a file has no fields.

NAT2813: Objects without subobjects listed successfully.

Text	Objects without subobjects listed successfully.
Explanation	At RETRIEVAL, all objects having no relation to a subobject were requested. These objects have been displayed successfully.

NAT2814: Too many continuation cards. Input skipped:

Text

Too many continuation cards. Input skipped:

Explanation

The command input for Predict in batch is delimited. Under special
circumstances some input cards are skipped. The skipped parameters
are listed.

Action

Reduce command input.

NAT2815: Overflow occurred. Parameter possibly skipped:

Text

Overflow occurred. Parameter possibly skipped:

Explanation

The command input for Predict in batch is delimited. Under some
circumstances an overflow may have occurred and not all parameters
are recognized by the command processor. The skipped parameters are
listed.

Action

Reduce command input in batch.

NAT2816: Error description displayed.

Text	Error description displayed.
Explanation	In the command line a help request was entered. The error description for the requested error has been displayed.

NAT2817: Command help displayed.

Text	Command help displayed.
Explanation	In the command line a help request was entered. The help description will be displayed.

NAT2818: Internal error in command processor.

Text	Internal error in command processor.
Explanation	An internal error has occurred.
Action	Document the command sequence and contact SAG support.

NAT2819: Object converted.

Text	Object converted.
Explanation	The conversion of an object from version 1 format into version 2 format was executed.

NAT2820: Object has got an old description.

Text	Object has got an old description.
Explanation	Before the conversion is started an old description for the object has been found.

NAT2821: Object has got a new description.

Text	Object has got a new description.
Explanation	Before the conversion is started a description in version 2 format has been found.
Action	Delete the new description or do not start the conversion.

NAT2822: Object conversion listed successfully.

Text	Object conversion listed successfully.
Explanation	The converted objects have been displayed successfully.

NAT2823: For object class "ALL" no ID allowed.

Text

For object class "ALL" no ID allowed.

Explanation

No identification (ID) may be defined when all data of the dictionary
should be unloaded or when all unloaded data on the sequential data
set should be loaded.

Action

Do not specify any ID when using the command "ALL".

NAT2824: System points to a different library.

Text

System points to a different library.

Explanation

The program implementation pointer consisting of
        - program id
        - library
        - fnr
        - dbid
is not equivalent to the implementation pointer of the system which
the program belongs to. The system implementation consists of
        - library id
        - fnr
        - dbid.

Action

Change the implementation pointer of the program.

NAT2825: Keys must be different.

Text	Keys must be different.
Explanation	The specified keywords for an object must be different.
Action	Check specified keys.

NAT2826: Synonyms must be different.

Text	Synonyms must be different.
Explanation	The specified synonyms for an element must be different.
Action	Enter different synonyms.

NAT2827: PF-KEY must be less than 25.

Text	PF-KEY must be less than 25.
Explanation	Predict supports PF-KEY 1 thru PF-KEY 24.
Action	Enter a valid PF-KEY.

NAT2828: Maximum page size is 250.

Text	Maximum page size is 250.
Explanation	The specified page size must be less 251.
Action	Enter a valid page size.

NAT2829: Synonym must be 1...9.

Text	Synonym must be 1...9.
Explanation	Up to 9 synomyms can be specified.
Action	Use only synonym1 thru synonym9.

NAT2830: This user is not defined or was purged.

Text

This user is not defined or was purged.

Explanation

The specified user is not known in Security. For details, consult the
Natural Security documentation and the security notes in the Predict
Reference documentation.

NAT2831: Invalid password entered.

Text

Invalid password entered.

Explanation

An invalid password was entered. Either an unauthorized user tried to
violate the system or the password was misspelled. For details, consult
the Natural Security documentation and the security notes in the
Predict documentation.

Action

Enter the correct password.

NAT2832: The user is not an authorized owner.

Text

The user is not an authorized owner.

Explanation

An attempt was made to execute a function with an object for which the
user must be an authorized owner. For details, see the Natural Security
documentation and the security notes in the Predict documentation.

NAT2833: No authorized owners signed with passwords.

Text

No authorized owners signed with passwords.

Explanation

An authorized owner must sign with his password when a function is
performed on an object not belonging to the user. For details,
see the Natural Security documentation and the security notes in the
Predict documentation.

NAT2834: Authorized owners must sign.

Text

Authorized owners must sign.

Explanation

If a function is to be performed on an object not belonging to the
user and the user is linked to that object, authorized owners
must sign with their passwords. For details, see Natural Security
documentation and the security notes in the Predict documentation.

NAT2835: User not authorized to generate this DDM.

Text

User not authorized to generate this DDM.

Explanation

In Natural Security the user is not authorized to generate the Data
Definition Module. For details, see the Natural Security documentation
and the security notes in the Predict documentation.

NAT2836: No "SCRATCH" because of activated user-exit.

Text	No "SCRATCH" because of activated user-exit.
Explanation	If the user-exit for the purge function is activated, "SCRATCH" of objects is not possible any longer.
Action	Use the "PURGE" function.

NAT2837: Not enough owners available.

Text

Not enough owners available.

Explanation

This message occurs during the purge of an Adabas file, if Security
is active. Predict determines the minimum number of security owners
of the DDMs related to this Adabas file. For every DDM the owners
must sign. Sometimes it might happen, that the established list is
not sufficient for Natural Security. In this case, please purge
first all related user views and then the Adabas file.

Action

Delete the userviews.

NAT2838: Renumber not allowed for user views.

Text	Renumber not allowed for user views.
Explanation	The function renumber is not allowed for files of type "U" (Userview).
Action	Renumber the Adabas file.

NAT2839: No line marked with ".N".

Text	No line marked with ".N".
Explanation	The edit command "POINT" only makes sense, if a line has been marked with ".N" before.
Action	Mark a line with ".N" before issuing the edit command "POINT".

NAT2840: The fields related to the standard file have been listed.

Text	The fields related to the standard file have been listed.
Explanation	All fields related to the standard file have been displayed on the screen.

NAT2841: File number required.

Text	File number required.
Explanation	The specification of the file number is required.
Action	Enter a file number.

NAT2842: File is not a VSAM file.

Text	File is not a VSAM file.
Explanation	The referenced file is not a VSAM file.
Action	Check input and correct error.

NAT2843: Logical VSAM files only for "KSDS" files.

Text	Logical VSAM files only for "KSDS" files.
Explanation	The creation of logical VSAM files are only allowed if the physical file is of type "KSDS".
Action	Check file type.

NAT2844: No library specified.

Text	No library specified.
Explanation	A member and a library must be specified for the PUNCH command.
Action	Enter a library.

NAT2845: Related File number only allowed for logical VSAM files.

Text

Related File number only allowed for logical VSAM files.

Explanation

If you add a new file the specification of the related file number
is only allowed for logical VSAM files.

Action

Enter blank for related file number.

NAT2846: Member punched out on work file 1.

Text	Member punched out on work file 1.
Explanation	The member specified was punched out on work file 1.

NAT2847: Number of lines processed.

Text	Number of lines processed.
Explanation	This message informs the user how many lines were processed.

NAT2848: File number must change.

Text	File number must change.
Explanation	If you change the file type of a userview, the file number must be changed too.
Action	Enter a new file number.

NAT2849: Object not unique.

Text	Object not unique.
Explanation	The truncated object name, which was checked by the command-processor, is not unique.
Action	Correct error.