Roll Server Messages
This section lists the messages that may be issued by the Natural
Roll Server. Unlike Natural system messages, the explanatory long texts to
these messages and codes are only available in this document, not online.
For information on the Roll Server, see:
In addition, refer to the relevant IBM documents mentioned
below.
RSM0001 - Subsystem ID invalid
| Explanation |
A subsystem ID was specified that is longer than 4
characters.
|
| Action |
Specify a subsystem ID of 1 to 4 characters. |
RSM0002 - Roll file number not numeric
| Explanation |
The second parameter is not a number. |
| Action |
Specify a valid number, |
RSM0003 - Invalid number of roll files
| Explanation |
A number greater than 5 was specified. |
| Action |
Specify a number between 0 and 5. |
RSM0004 - Number of LRB slots not specified
| Explanation |
The third parameter was omitted. |
| Action |
This is a mandatory parameter. Specify a valid
number.
|
RSM0005 - Number of LRB slots not numeric
| Explanation |
The third parameter is not a number. |
| Action |
Specify a valid number. |
RSM0006 - Number of LRB slots > 32767
| Explanation |
The number of LRB slots specified is too large.
|
| Action |
Specify a maximum of 32767 LRB slots. |
RSM0007 - Invalid CF structure name
| Explanation |
A structure name of more than 16 characters was
specified.
|
| Action |
Specify a structure name of 16 characters or less.
|
RSM0008 - Bad return code from IEANTRT:
rc
| Explanation |
The Name/Token Service returned return code
rc.
|
| Action |
See the current IBM MVS Programming:
Authorized Assembler Services Reference manual for information
about the return code from the IEANTRT request.
|
RSM0009 - DCB buffer could not be obtained. Reason:
reasoncode
| Explanation |
A STORAGE OBTAIN request failed with
reasoncode.
|
| Action |
Increase virtual storage available to the Roll
Server. (REGION option of the JCL EXEC statement.)
|
RSM0010 - OPEN failed for DDNAME:
ddname
| Explanation |
The roll file specified under DDNAME
ddname could not be opened.
|
| Action |
Specify a valid roll file DSN. |
RSM0011 - Duplicate roll file DSN
| Explanation |
The same DSN was specified for two roll file
DDNAMEs.
|
| Action |
Specify unique DSNs for each roll file. |
RSM0012 - Temp roll file buffer could not be obtained. Reason:
reasoncode
| Explanation |
A STORAGE OBTAIN request failed with
reasoncode.
|
| Action |
Increase virtual storage available to the Roll
Server. (REGION option of the JCL EXEC statement.)
|
RSM0013 - RF directory buffer could not be obtained. Reason:
reasoncode
| Explanation |
A STORAGE OBTAIN request failed with
reasoncode.
|
| Action |
Increase virtual storage available to the Roll
Server. (REGION option of the JCL EXEC statement.)
|
RSM0014 - LRB directory could not be obtained. Reason:
reasoncode
| Explanation |
A STORAGE OBTAIN request failed with
reasoncode.
|
| Action |
Increase virtual storage available to the Roll
Server. (REGION option of the JCL EXEC statement.)
|
RSM0015 - Unrecognized parameter or invalid value in parameter
file
| Explanation |
An unknown keyword or invalid parameter value was
found in the parameter file.
|
| Action |
Correct the parameter file. |
RSM0017 - Size for LRB > 524287 blocks
| Explanation |
The number of LRB slots times LRB slot size exceeds 2
Gigabytes.
|
| Action |
Specify fewer LRB slots or a smaller slot size.
|
RSM0018 - LX table could not be obtained. Reason:
reasoncode
| Explanation |
A STORAGE OBTAIN request failed with
reasoncode.
|
| Action |
Increase virtual storage available to the Roll
Server. (REGION option of the JCL EXEC statement.)
|
RSM0019 - Roll Server Version vrs is
active
Where vrs represents the relevant
product version (see also Version in the Glossary).
| Explanation |
The Roll Server initialized successfully and is ready
for work.
|
| Action |
None. |
RSM0020 - Subtask terminated:
taskname rc
| Explanation |
The subtask indicated by
taskname has terminated. If the return
code is not zero, it is indicated as
rc.
|
| Action |
If a nonzero
rc is reported, contact Software AG
Support.
|
RSM0021 - Subtask termination initiated
| Explanation |
In response to a TERM or
DEAL operator command, the Roll Server has started
to terminate its subtasks.
|
| Action |
None. |
RSM0022 - All subtasks terminated
| Explanation |
In response to a TERM or
DEAL operator command, the process of terminating
the subtasks is finished.
|
| Action |
None. |
RSM0023 - Other than MODIFY or STOP command received
| Explanation |
The Roll Server received a CIBVERB other
than MODIFY or STOP.
|
| Action |
Contact Software AG Support. |
RSM0026 - Command allowed in active state only:
command
| Explanation |
In deallocated (DEAL) state, the Roll
Server cannot accept operator command command.
|
| Action |
Issue the START operator
command, then repeat the rejected command.
|
RSM0027 - Unknown command command
| Explanation |
An invalid operator command was issued to the Roll
Server.
|
| Action |
Check for typing error and correct. |
RSM0029 - Recursive abend in maintask. Now waiting for CANCEL
command
| Explanation |
An abend occurred during abend recovery. |
| Action |
Cancel the Roll Server started task and contact
Software AG Support.
|
RSM0030 - Low Water Mark not numeric or invalid
| Explanation |
The sixth parameter is not a number or exceeds 10.
|
| Action |
Specify a low water mark between 0 and 10. |
RSM0031 - High Water Mark not numeric or invalid
| Explanation |
The seventh parameter is not a number or exceeds 10.
|
| Action |
Specify a high water mark between 0 and 10. |
RSM0032 - Too few/many parameters for command
| Explanation |
The number of parameters is not the one that has been expected. |
| Action |
Correct the number of parameters. |
RSM0033 - All resources deallocated
| Explanation |
In response to a DEAL
(deallocate) operator command, the Roll Server is now in deallocated state.
|
| Action |
None. |
RSM0036 - DUMP successful for roll file
n
| Explanation |
Slots from the Local Roll Buffer and the Roll File
Directory were successfully written to Roll File n
on disk.
|
| Action |
None. |
RSM0037 - DUMP failed for roll file
n
| Explanation |
The Roll Server was unable to write slots and
directory to Roll File n.
|
| Action |
Look for accompanying messages indicating the error
situation that prevented a successful dump.
|
RSM0038 - SNAP failed. Task RB could not be obtained
| Explanation |
A STORAGE OBTAIN request failed.
|
| Action |
Increase virtual storage available to the Roll
Server. (REGION option of the JCL EXEC statement.)
|
RSM0039 - XES functions not available
| Explanation |
Environmental error. XES functions are not available.
This can occur because the coupling facility hardware necessary to provide XES
functions is not present.
|
| Action |
Re-IPL the system or contact IBM. |
RSM0040 - IXLCONN unsuccessful. Reason code:
reasoncode
| Explanation |
A connection to the Coupling Facility structure
specified as fifth parameter could not be established.
|
| Action |
Determine the meaning of the reason code in the IBM
document z/OS Programming: Sysplex Services
Reference and follow the indicated action.
|
RSM0041 - CF initialization successful for list:
n
| Explanation |
The Roll File Directory for Roll File
n was established in the list structure specified as
fifth parameter.
|
| Action |
None. |
RSM0042 - CF initialization failed for list/RSN code:
reasoncode
| Explanation |
The Roll File Directory
for Roll File n could not be established in the list
structure specified as fifth parameter.
The reason codes are as follows:
|
12
|
STORAGE OBTAIN failed.
|
16
|
An abend occurred during initialization. |
20
|
The Structure is allocated too small to hold the Roll
File Directory.
|
24
|
Structure failure or connectivity lost. |
| Action |
For Reason Code 12: |
Increase virtual storage available to the Roll
Server. (REGION option of the JCL EXEC statement.)
|
| For Reason Code 16: |
Contact Software AG Support. |
| For Reason Code 20: |
Define a larger size for the CF structure in the CFRM
policy.
|
| For Reason Code 24: |
Reset the structure using operator command
SETXCF
FORCE,STR,STRNAME=name. If the error
persists, contact IBM.
|
RSM0043 - IXCJOIN failed. Return/Reason code:
reasoncode
| Explanation |
The Roll Server could not join its IXC message group.
|
| Action |
Determine the meaning of the reason code in the IBM
document z/OS Programming: Sysplex Services
Reference and follow the indicated action.
|
RSM0044 - Act conn buffer could not be obtained
| Explanation |
A STORAGE OBTAIN request failed.
|
| Action |
Increase virtual storage available to the Roll
Server. (REGION option of the JCL EXEC statement.)
|
RSM0045 - Applied zaps:
| Explanation |
When Zaps are applied to the Roll Server, it issues
this message, followed by a list of applied zaps.
|
| Action |
None. |
RSM0046 - Roll file in use by job
jobname ASID asid
| Explanation |
The Roll Server cannot start because another Roll
Server is using a roll file. The other Roll Server is running in job or started
task named jobname with address space
identifier asid. The message is
followed by the roll file's DSN.
|
| Action |
Ensure that all Roll Servers have dedicated roll
files.
|
RSM0047 - Operator command: command
| Explanation |
The Roll Server echoes operator commands to
JESMSGLG.
|
| Action |
None. |
RSM0048 - IARV64 GETSTOR failed. Return code:
rc
| Explanation |
The Roll Server uses Memory Objects for the Local
Roll Buffers. The Memory Objects are acquired using the IARV64 services. A
GETSTOR function failed.
|
| Action |
Determine the action in the IARV64 description in the
current IBM document MVS Programming: Authorized Assembler
Services Reference manual.
|
RSM0049 - Disconnected from CF with RSN=FAILURE
| Explanation |
The Roll Server disconnected from the Coupling
Facility structure with parameter REASON=FAILURE in order to
notify other participating Roll Servers of its own termination with failure.
|
| Action |
None. |
RSM0050 - Disconnected from CF with RSN=NORMAL
| Explanation |
The Roll Server disconnected from the Coupling
Facility structure with parameter REASON=NORMAL in order to notify
other participating Roll Servers of its own normal termination.
|
| Action |
None. |
RSM0051 - Roll file n is newer than
the CF structure
| Explanation |
A roll file was newly formatted, but the Coupling
Facility structure still contains its Roll File Directory.
|
| Action |
After formatting a roll file, re-initialize the CF
structure using operator command SETXCF
FORCE,STR,STRNAME=name
|
RSM0052 - Not enough storage for IARV64 GETSTOR - Increase
MEMLIMIT
| Explanation |
Not enough memory in Memory Objects could be
allocated to hold the Local Roll Buffer(s). The allocatable amount is
controlled by the MEMLIMIT parameter of the JCL
EXEC statement and SMF exit IEFUSI.
|
| Action |
Increase the amount of usable storage in the
MEMLIMIT parameter, or change the IEFUSI
exit.
|
RSM0053 - Not enough memory for SNAP
| Explanation |
A SNAP dump could not be taken because a
STORAGE OBTAIN request failed.
|
| Action |
Increase virtual storage available to the Roll
Server. (REGION option of the JCL EXEC statement.)
|
RSM0054 - OPEN for SYSUDUMP failed
| Explanation |
A SNAP dump could not be taken because
SYSUDUMP could not be opened.
|
| Action |
Ensure that the Roll Server job or started task
includes a DD statement for SYSUDUMP.
|
RSM0055 - CF structure does not contain enough lists
| Explanation |
For each roll file, the Roll Server maintains its
directory in a separate list in the CF structure.
The existing structure has fewer lists than the number
of roll files to be used.
|
| Action |
Re-initialize the CF structure using operator command
SETXCF
FORCE,STR,STRNAME=name, or use fewer
roll files.
|
RSM0056 - LRB slotsize invalid or not numeric
| Explanation |
The fourth parameter is either not numeric or greater
than 10000000.
|
| Action |
Correct typing error or specify a smaller LRB slot
size.
|
RSM0057 - Bad return code from IEANTCR:
rc
| Explanation |
The Name/Token Service denied a create request with
return code rc.
|
| Action |
Determine the action from the description of
IEANTCR in the current IBM document MVS Programming:
Authorized Assembler Services Reference manual.
|
RSM0058 - Rollserver already active in
subsid: Job jobname ASID
asid
| Explanation |
The Roll Server determined that in the Natural
subsystem specified in the first parameter,
subsid, another Roll Server is already
active. The other Roll Server is running in job or started task named
jobname, with address space identifier
asid.
|
| Action |
Start only one Roll Server per Natural subsystem per
MVS image.
|
RSM0059 - Roll file ddname is below
version 412
| Explanation |
The roll file specified in
ddname has an incompatible format.
|
| Action |
Reformat the roll file using NATRSRFI.
See Natural Roll Server
Operation in the Natural
Operations documentation.
|
RSM0060 - User exit loaded: NATRSU14
| Explanation |
User exit NATRSU14 is loaded and will be
called to allocate users to roll files.
|
| Action |
None. |
RSM0061 - Slot size must be specified when no roll files are
used
| Explanation |
When running without roll files, a default value for
the LRB slot size cannot be determined.
|
| Action |
Specify LRB slot size as fourth parameter. |
RSM0062 - Running with in-core roll file
| Explanation |
The second parameter specified 0 for the
number of roll files. Natural threads are held in Local Roll Buffer slots only
and are lost when the Roll Server terminates.
|
| Action |
None. |
RSM0063 - Coupling Facility will not be used
| Explanation |
The second parameter specified 0 for the
number of roll files, yet the fifth parameter specified a CF structure. To
enable Natural to run on several MVS images in a Parallel Sysplex, the Roll
Server needs to use roll files. Operation continues without roll files, but the
Roll Server will not communicate with other Roll Servers in other MVS images.
|
| Action |
Specify roll files in a Parallel Sysplex, or do not
specify a CF structure name with zero roll files.
|
RSM0064 - High/low water marks ignored
| Explanation |
The second parameter specified 0 for the
number of roll files, yet low or high watermarks were also specified. With no
roll files, low and high watermark are meaningless. Operation continues.
|
| Action |
Do not specify watermarks with zero roll files.
|
RSM0065 - XES Event exit received unexpected event type:
nn
| Explanation |
The exit for the connection to the CF structure
received an event type that it cannot handle.
nn is the number corresponding to the
event type.
|
| Action |
Contact Software AG Support. |
RSM0066 - REBUILD Start: CF structure temporarily unavailable
| Explanation |
Operator command SETXCF
START,REBUILD… was issued for the Coupling Facility Structure
that holds the Roll File Directory. Roll Server operation is quiesced until the
Rebuild operation is complete.
|
| Action |
None. |
RSM0067 - REBUILD End: CF structure available again
| Explanation |
Operator command SETXCF
START,REBUILD… was issued for the Coupling Facility Structure
that holds the Roll File Directory. Rebuild is now complete and the Roll Server
resumes normal operation.
|
| Action |
None. |
RSM0068 - LRB slot size parameter ignored
| Explanation |
When running with roll files, the roll file slot size
determines the LRB slot size.
|
| Action |
Specify this parameter only when running without roll
file.
|
RSM0069 - Invalid non-activity time
| Explanation |
The eighth start-up parameter (or TIMEOUT
NAT command) is not numeric or greater than
10000000.
|
| Action |
Specify a valid number. |
RSM0070 - Invalid timeout check time
| Explanation |
The nineth start-up parameter (or TIMEOUT
TOC command) is not numeric or not a valid time of day.
|
| Action |
Specify a valid time of the form
h, hh,
hhm, or hhmm |
RSM0072 - Timeout processing starting
| Explanation |
The routine to detect and delete non-active sessions
is running.
|
| Action |
None. |
RSM0073 - Scheduled/Operator timeout processing deleted
n sessions
| Explanation |
Timeout check has detected and deleted
n sessions that had been inactive longer than the
non-activity time specified as start-up parameter or with the
TIMEOUT NAT command. Operator timeout processing was
requested by the operator command TIMEOUT NOW while
scheduled timeout processing was run according to the parameter
settings.
|
| Action |
None. |
RSM0074 - Timeout processing ended with return code
rc
| Explanation |
The routine to detect and delete non-active sessions
has ended with return code rc. In case
of return code 12, rc takes the form
rc/rsn, where
rsn is the reason code.
|
| Action |
Check in Return Codes and Reason Codes of the Roll Server
Requests for an explanation of the return and reason code,
and action to be taken.
|
RSM0075 - TIMEOUT ON/NOW rejected: No valid timeout
parameters
| Explanation |
No valid non-activity time and/or no valid
timeout-check-time has been specified before this command was issued.
|
| Action |
For TIMEOUT ON, either
specify non-activity time and timeout-check-time as start-up parameters, or
precede the command with TIMEOUT NAT and
TIMEOUT TOC commands. For TIMEOUT
NOW, either specify non-activity time as start-up parameter or
precede the command with TIMEOUT NAT.
|
RSM0076 - Timeout processing disabled
| Explanation |
Timeout processing was disabled by a
TIMEOUT OFF command.
|
| Action |
None. |
RSM0077 - REPEAT, TERSE, TOC, VERBOSE, or ?
| Explanation |
The TIMEOUT operator
command was issued with an invalid sub-parameter.
|
| Action |
For a valid TIMEOUT
command syntax, refer to Natural Roll Server
Operation in the Natural
Operations documentation.
|
RSM0078 - Invalid parameter:
parameter
| Explanation |
An invalid parameter was specified, or the last
parameter was not UCTRAN.
|
| Action |
Correct the PARM string of the JCL
EXEC statement.
|
RSM0081 - Compression task n started
successfully
| Explanation |
The Roll Server has started an additional task to
handle the compression and decompression work load.
|
| Action |
None. |
RSM0082 - Compression task could not be started: Error
n
| Explanation |
Error n
occurred while the Roll Server was starting a new compression task.
|
| Action |
Contact Software AG Support. |
RSM0083 - Roll Server not in active state. TIMEOUT
aborted.
| Explanation |
The Roll Server has deallocated its resources due to
the operator command DEAL or a subtask abnormal end.
The TIMEOUT command cannot execute in this
situation.
|
| Action |
Reactivate the Roll Server with the operator command
START, or terminate the Roll Server and restart
it.
|
RSM0084 - Low water mark cannot be above high water mark
| Explanation |
The low water mark must be below the high water mark.
|
| Action |
Correct the PARM string of the JCL
EXEC statement, or the low water/high water values in the
parameter file.
|
RSM0085 - Module NATRSCMP not linked: Roll compression disabled.
| Explanation |
Module NATRSCMP must be linked to the Roll Server. |
| Action |
Check the installation process of the Roll Server, and contact Software AG
support.
|
RSM0086 - Roll compression will run on zIIP
| Explanation |
The Roll Server has determined that the system
includes one or more IBM System z Integrated Information Processors (zIIPs).
Compression tasks will run as SRBs and be scheduled to run on the zIIP.
|
| Action |
None. |
RSM0087 - Enclave could not be created for SRB:
n
| Explanation |
Error n
occurred when the Roll Server tried to create a Work Load Manager (WLM) enclave
for the compression SRB.
|
| Action |
Contact Software AG Support. |
RSM0088 - Enclave could not be redirected for SRB:
n
| Explanation |
Error n was
returned by the IBM service that was called to specify CPU offload to an IBM
System z Integrated Information Processor (zIIP).
|
| Action |
Contact Software AG Support. |
RSM0089 - No zIIP available. Roll compression will run on
GP.
| Explanation |
An IBM System z Integrated Information Processor
(zIIP) is not installed. Thread compression and decompression will run on a
general purpose processor.
|
| Action |
None. |
RSM0090 - DDNAME ddname does not
designate a VSAM LINEAR file.
| Explanation |
The data set defined in the DD statement for
ddname is a VSAM file but is not of
type LINEAR.
|
| Action |
Specify a VSAM LINEAR file. |
RSM0091 - Unexpected reason code
code opening DDNAME
ddname
| Explanation |
A warning return code was received with reason code
code when opening a VSAM roll
file.
|
| Action |
Check message IEC161I in your JESMSGLG and follow the
instructions IBM provides for this message in their MVS System Messages
documentation.
|
RSM0119 - Roll Server settings in effect:
| Explanation |
This message is issued at Roll Server start-up. It is
followed by several RSM0119 messages of varying contents,
summarizing parameters in effect for this run.
Selected RSM0119 messages are also issued
in response to the TIMEOUT operator command.
|
| Action |
None. |
RSM0120 - Start of Statistics
| Explanation |
This message is issued during shut-down and in
response to the STATS operator command.
Several RMS0120 statistics messages with
varying text follow this message.
|
| Action |
None. |
RSM0120 - End of Statistics
| Explanation |
This message is issued during shut-down and in
response to the STATS operator command.
It indicates the end of statistics output.
|
| Action |
None. |
RSM0131 - Environment error detected. SubRC:
subrc
| Explanation |
Diagnostic message that goes along with RC = 16. |
| Action |
Contact Software AG support. |
RSM0133 - DEAL and START commands are no longer
supported.
| Explanation |
The DEAL and
START operator commands are no longer available.
It indicates the end of statistics output.
|
| Action |
If you want to refresh the roll server, use the z/OS
STOP and START console commands.
|
RSM0190 - +++++ Start of Diagnostics +++++
| Explanation |
This message is issued in response to the
DIAGNOSE operator command.
Several RMS0190 messages with varying text
may follow this message, depending on the nature of diagnostic Zaps supplied by
Software AG.
|
| Action |
Follow advice given with diagnostic Zap. |
RSM0190 - +++++ End of Diagnostics +++++
| Explanation |
This message is issued in response to the
DIAGNOSE operator command. It indicates the end of
output generated by the DIAGNOSE command.
|
| Action |
Follow advice given with diagnostic Zap. |
RSM0313 - NATRSCMP return code 99. Diagnostic data
follows:
| Explanation |
An unexpected error was encountered during thread
compression/decompression.
|
| Action |
Contact Software AG support. |
RSM0313 - NATRSCMP return code 8. UserID and error message
follow:
| Explanation |
An unexpected error was encountered during thread
compression/decompression.
|
| Action |
Contact Software AG support. |
RSM0313 - DUMP requested by NATRSCMP. Check SYSUDUMP data
set.
| Explanation |
An unexpected error was encountered during thread
compression/decompression.
|
| Action |
Contact Software AG support. |
