Message Buffer Pool Messages
This section contains the messages that may be issued by the message buffer pool.
For information on this buffer pool, see Message Buffer Pool in the
Operations documentation.
MTBP001 - Work buffer could not be obtained
Explanation |
Work buffer could not be obtained. |
Action |
Check if there is memory saturation on your system. |
MTBP002 - Bad return code from IEANTRT: xxxx
Explanation |
Bad return code from IEANTRT: xxxx.
|
Action |
Contact Software AG Support. |
MTBP003 - Bad return code from IEANTCR: xxxx
Explanation |
Bad return code from IEANTCR: xxxx.
|
Action |
Contact Software AG Support. |
MTBP004 - Allocation of an ECSA directory segment failed:
xxxx
Explanation |
Allocation of an ECSA directory segment failed:
xxxx.
|
Action |
Contact Software AG Support. |
MTBP005 - A recursive abend occurred. Now waiting for CANCEL cmd.
Explanation |
A recursive abend occurred. Now waiting for CANCEL command. |
Action |
Contact Software AG Support. |
MTBP006 - Message BP handler is active
Explanation |
A Message Buffer Pool handler can only be started once for the same
subsystem ID.
|
Action |
None. |
MTBP007 - Other than MODIFY or STOP command received
Explanation |
The received command is different from MODIFY or STOP. |
Action |
Use only MODIFY or STOP TSO commands. No other TSO commands are
allowed.
|
MTBP008 - Received command: xxxx
Explanation |
This is the command that has been issued. |
Action |
None. |
MTBP009 - Invalid command, nothing specified
Explanation |
Invalid command, nothing specified. |
Action |
Specify a valid command. |
MTBP010 - Negative command/keyword length encountered
Explanation |
Negative command/keyword length encountered. |
Action |
Contact Software AG Support. |
MTBP011 - Invalid command: xxxx
Explanation |
The issued command is unkown or not allowed. |
Action |
Specify a valid command. |
MTBP012 - More than one command: xxxx
Explanation |
More than one command: xxxx.
|
Action |
Contact Software AG Support. |
MTBP013 - Invalid parameter keyword: xxxx
Explanation |
Invalid parameter keyword: xxxx.
|
Action |
Specify valid parameter keyword(s). |
MTBP014 - Invalid BPNAME specified
Explanation |
The syntax of the buffer pool name is not correct. |
Action |
Check the syntax of the buffer pool name. |
MTBP015 - Invalid SUBSID specified
Explanation |
The syntax of the subsystem-ID is not correct. |
Action |
Check the syntax of the subsystem-ID. |
MTBP016 - Invalid SIZE specified
Explanation |
Invalid SIZE specified. |
Action |
Specify the size of the message buffer pool as an integer value in the
correct range.
|
MTBP017 - Buffer pool is already allocated: xxxx
Explanation |
The specified buffer pool name is already active. You cannot have more than
one job for a given buffer pool.
|
Action |
None. |
MTBP018 - Allocation of IDT segment failed: xxxx
Explanation |
Allocation of IDT segment failed: xxxx.
|
Action |
Contact Software AG Support. |
MTBP019 - DSPSERV CREATE failed with reason: xxxx
Explanation |
DSPSERV CREATE failed with reason: xxxx.
|
Action |
Contact Software AG Support. |
MTBP020 - ALESERV ADD failed with return code:
xxxx
Explanation |
ALESERV ADD failed with return code: xxxx.
|
Action |
Contact Software AG Support. |
MTBP021 - Subsystem not active: xxxx
Explanation |
Message Buffer pool must be started after
NATASMvr and/or
NATRSMvr.
|
Action |
Start NATASMvr and/or
NATRSMvr before starting
NATMBPvr.
|
MTBP022 - Buffer pool not active: xxxx
Explanation |
Buffer pool not active: xxxx.
|
Action |
Contact Software AG Support. |
MTBP023 - ALESERV DELETE failed with return code:
xxxx
Explanation |
ALESERV DELETE failed with return code: xxxx.
|
Action |
Contact Software AG Support. |
MTBP024 - DSPSERV DELETE failed with reason code:
xxxx
Explanation |
DSPSERV DELETE failed with reason code: xxxx.
|
Action |
Contact Software AG Support. |
MTBP025 - Message BP is deactivated now: xxxx
Explanation |
This is an information message. |
Action |
None. |
MTBP026 - Message BP is active now: xxxx
Explanation |
This is an information message. |
Action |
None. |
MTBP027 - Buffer pool table is full.
Explanation |
Buffer pool table is full. |
Action |
Contact Software AG Support. |
MTBP028 - Other than MODIFY or STOP command received
Explanation |
The received command is different from MODIFY or STOP. |
Action |
Use only MODIFY or STOP TSO commands. No other TSO commands are
allowed.
|
MTBP029 - Allocation of LX memory failed: xxxx
Explanation |
Allocation of LX memory failed: xxxx.
|
Action |
Contact Software AG Support. |
MTBP030 - DDNAME missing for input file: xxxx
Explanation |
DDNAME missing for input file: xxxx.
|
Action |
Make sure a dataset with the given DDNAME is specified in the JCL. |
MTBP031 - DDNAME not specified or invalid
Explanation |
The syntax of the DDNAME is invalid, or no DDNAME is specified at
all.
|
Action |
Check the syntax of DDNAME. |
MTBP032 - OPEN for command input file failed: xxxx
Explanation |
OPEN for command input file failed:
xxxx.
|
Action |
Check the access level of the specified dataset. |
MTBP033 - No Zaps are applied
Explanation |
No Zaps are applied. |
Action |
Contact Software AG Support. |
MTBP034 - DD statement for SNAP missing: xxxx
Explanation |
DD statement for SNAP missing: xxxx.
|
Action |
Make sure that there is a DDNAME for a SNAP dump. |
MTBP035 - OPEN for SNAP failed: xxxx
Explanation |
OPEN for SNAP failed: xxxx.
|
Action |
Conact Software AG Support. |
MTBP036 - DDNAME too long.
Explanation |
A DDNAME must have a length between 1 and 8 characters. |
Action |
Check the length of the DDNAME. |
MTBP037 - Invalid value specified for AREA
Explanation |
Invalid value specified for AREA. |
Action |
Specify a valid value for AREA (ALL|HT|TEXT|CB|COMM). |
MTBP038 - Invalid BPLIST specified
Explanation |
Invalid BPLIST specified. |
Action |
Specify a name with a length between 1 and 8 characters. |
MTBP039 - Buffer pool poolname owned by other task
Explanation |
There is a sharing conflict with the buffer pool. |
Action |
Check if another active configuration is using the same pool name. |
MTBP040 - Startup parameter: parameter
Explanation |
The startup parameters are echoed to JESMSGLG. |
Action |
None. |
MTBP041 - Operator command: command
Explanation |
The Message Buffer Pool Server echoes operator commands to
JESMSGLG.
|
Action |
None. |
MTBP042 - OPEN command file: filename
Explanation |
The name of the command file is echoed to JESMSGLG. |
Action |
None. |
MTBP043 - CLOSE command file: filename
Explanation |
The name of the command file is echoed to JESMSGLG. |
Action |
None. |