This Dokument describes the functionality of Natural CICS Interface.
It covers the following topics:
Natural CICS Interface controls session initialization, roll-in restart (in pseudo-conversational mode), terminal I/O, database access, ABEND processing, Natural local buffer pool calls and the loading, linking to and releasing of external subroutines. In addition, all roll I/O operations are performed by Natural CICS Interface.
The Natural environment-dependent nucleus (described in the Natural Installation documentation) for CICS consists of the following components:
The object module NCINUCM specific to z/OS.
This module holds the logic required for calling operating-system and CICS services.
This module also holds the entry routine, which in particular prepares Natural CICS Interface Language Environment (LE) linkage; see Natural CICS Interface and IBM Language Environment (LE). The module is CICS version dependent.
The NTCICSP
macro of the Natural parameter module (see CICSP - Environment Parameters for Natural
CICS Interface the Parameter
Reference documentation).
This macro holds Natural CICS Interface parameters required for runtime and system environment generation options. The module is not CICS version dependent, although some of the parameters should be set depending on the CICS version.
The object module NCINUC.
This module holds Natural CICS Interface system control logic
and service routines used by the environment-dependent nucleus. The service
routines are independent of CICS and CICS version and are dealing with CICS by
calling CICS service routines in the NCINUCM module.
The object module NCIXCALM.
This module is a separate program in CICS, that is, it is not
linked to the Natural nucleus, as it is invoked via EXEC CICS LINK
from 3GL programs called by Natural; see
Natural 3GL
CALLNAT Interface in the Operations
documentation. The module is independent of the CICS version.
The Natural environment-dependent nucleus is eligible to be placed into the CICS PLTSD for CICS quiesce stage 1 or 2 execution.
When executed in quiesce stage 1, Natural CICS Interface force-terminates all active Natural sessions prior to performing the SYSTP snapshot function (described in SYSTP Utility in the Natural Utilities documentation).
When executed in quiesce stage 2, Natural CICS Interface performs the SYSTP snapshot function.
Natural CICS Interface holds logic to be called (via a CICS LINK) by a node error program with the relevant CICS terminal entry address either in the CICS COMMAREA.
Natural features specific to CICS include the organization of dynamic storage in threads and the additional capability of handling these threads so that the Natural CICS System Control Program can more efficiently handle dynamic storage.
The Natural CICS System Control Program was initially developed to overcome the 64 KB GETMAIN limit under CICS. It provides complete storage allocation and management functions, including roll file I/O operations and relocation functions for pseudo-conversational users.
In order to enhance the pseudo-conversational processing capabilities of Natural with CICS, the System Control Program uses threads, a contiguous amount of storage which is set up for each user. This structure allows Natural to manage dynamic storage with minimal CICS involvement.
A complete understanding of system control can be attained from the following discussion of its structure and operation. Ensure that you understand this mechanism before starting the installation procedure of Natural under CICS.
Single CICS Region
The diagram below shows the components of the Natural system that reside in CICS dynamic storage. The components are explained under the following headings:
Scenario 1 applies when running Natural locally in a single CICS application region under z/OS.
Note for z/OS:
Additional scenarios are possible. The following three diagrams show combinations of z/OS systems, CICS regions, the Natural Roll Server and the Natural Authorized Services Manager (described in the Operations documentation).
Single z/OS With Single CICS Region, Single Roll Server
Single z/OS With Multiple CICS Regions, Single Roll Server and (Optional) Authorized Services Manager
Multiple z/OS With Multiple CICS Regions, Multiple Roll Servers/Authorized Services Managers
| Module | Scenario 1 | Scenario 2 | Scenario 3 | Scenario 4 |
|---|---|---|---|---|
NTBPI (BPI)
|
TYPE=SWAP,SIZE=
nnn
|
n/a | n/a | n/a |
NCMDIR CICSPLX
|
NO |
NO |
YES/MODE |
YES/MODE |
NCMDIR SIPSERV
|
NO |
NO/YES |
yes |
yes |
NCMDIR ROLLSRV
|
NO |
yes |
yes |
yes |
| Roll Server
CF structure name |
n/a | none | none | name
|
| Authorized Services Manager/SIP | n/a | n/a | SIP slot number/size | XCF group name/CF structure name |
Natural CICS Interface requires a SIP slot size of 256 bytes.
Anmerkung:
For the scenarios 2, 3 and 4, the very first Natural session
initializing the NCI environment must have the
SUBSID
parameter set to the value of the corresponding
Roll Server
and/or Authorized Services
Manager.
A thread is a contiguous storage area from where Natural requests all its required storage. It can either be storage shared by several Natural users or, in 31-bit mode environments, CICS user storage above the 16 MB line dedicated to a specific task.
Each storage thread can be seen as the "address space" for a Natural user. Each memory allocation request issued by the Natural nucleus is transferred to the system control program to be satisfied from the storage thread.
Storage threads are allocated when Natural CICS Interface is initialized. They are allocated in a CICS region or partition, in which case they are permanent (shared) threads or they are allocated during the start of a Natural CICS task, in which case they are exclusive threads (task-dependent user storage).
The technique of storage threads was implemented with Natural for the following reasons:
To overcome the 64 KB limitation of CICS for user storage in non-31-bit mode systems.
To be able to optimize rolling (formerly, each piece of user storage had to be written to the roll medium; now, as there is a contiguous storage area, this area is compressed by making the relevant portions contiguous to each other before rolling out).
Natural CICS Interface tries to satisfy all GETMAIN
requests of a Natural session from its thread. This is faster than
GETMAIN requests by means of CICS service calls. This is
particularly true for CICS command level calls, as the CICS EXEC
Interface Program (EIP) is involved, too.
A thread is released by the owning task with every screen I/O. This is true for both conversational and pseudo-conversational tasks. When a session is resumed, its storage is rolled into a thread again, unless its storage is still there; that is, no other task used the thread in between.
The Natural thread selection algorithm balances thread usage to minimize roll I/O operations. This means that the more threads there are, the better is the chance of finding the old data thus preventing a roll-in. However, the more threads there are, the more paging the operating system must perform to keep all threads efficiently in real storage.
Threads are grouped together depending on their size and their type;
that is, whether they have been pre-allocated as permanently shared storage or
via a GETMAIN request. The decision on which kind of thread group
to use, is controlled by the CICS transaction code at session initialization
time. All storage threads belonging to the same group have the same size.
The thread should be defined as small as possible; see also the Buffer Usage Statistics function of the SYSTP utility described in the Natural Utilities documentation. However, the thread must still be large enough to hold the session with the largest sizes.
If you have separate Natural development and production environments, the rule is to have more smaller threads in the production environment (to serve production requests as soon as possible) and fewer larger threads in the development environment (as Natural programmers normally need larger Natural sizes and have longer "think times").
The very first Natural session allocates all permanent (shared) threads.
As permanent storage threads are shared by several users and as
larger threads allocated via GETMAIN should not be kept for too
much time, a Natural task releases its thread with each terminal I/O.
Previously, however, the user data have to be saved to be able to restart the
Natural session after the terminal I/O has been performed.
Session data can be saved by using
the Natural Roll Server with its local roll buffer and roll files;
the CICS Roll Facilities;
the Natural swap pool.
See also the various component scenarios. For more information, see Roll Server in the Natural Operations documentation.
CICS Roll Facilities are local CICS storage facilities. They can be either CICS main or auxiliary temporary storage or VSAM relative record data sets (RRDS) which the user has previously defined to CICS. These files allow Natural to store a user's compressed dynamic storage when a roll-out occurs.
When a swap pool is used, the CICS roll facilities only serve as backup for the swap pool. The choice of the roll medium is of greater importance when no swap pool is used, since it affects Natural performance and throughput.
Every CICS service request causes CICS system overhead. So, the
larger the CISIZE/record size for the roll facility is, the less
CPU overhead occurs due to fewer CICS service calls to roll a Natural session.
On the other hand, larger CISIZE/record size also means more VSAM
buffer space allocated for the roll facility.
See Performance Considerations for further information on roll facilities.
 |
Warnung: When using the Roll Server, the swap pool and the CICS Roll Facilities are not available. |
The Natural local buffer pool contains all Natural modules during execution and copies of Natural modules once they have been loaded from the Adabas or VSAM system file.
The local buffer pool must be large enough to minimize the number of Natural program loads. However, if the local buffer pool is too large, this means wasted storage and may introduce paging overhead.
The local buffer pool is allocated as GETMAIN storage,
that is, EXEC CICS GETMAIN SHARED with all CICS Transaction Server
versions. Sufficient storage must be available in the partition or in the
relevant CICS DSA.
A local buffer pool is optional, as Natural can also run with a global buffer pool, which can be shared with other Natural environments such as Natural in Batch Mode (z/OS), Natural under TSO or Natural under IMS (under z/OS only).
The Natural swap pool is not supported in open transaction environments (OTE). In this case, use the Natural Roll Server instead.
The Natural swap pool offers the possibility to "swap" a compressed Natural session from the thread into a main storage area instead of doing expensive roll I/O operations.
The swap pool is allocated as GETMAIN storage, that is,
EXEC CICS GETMAIN SHARED. Sufficient storage must be available in
the partition or in the relevant CICS DSA.
The options for the swap management are set in the Natural CICS
source module NCISCPCB and by using the Natural profile parameter
BPI.
The size, name and cache size of the swap pool are specified using
profile parameter BPI or the
corresponding macro NTBPI
in the Natural parameter
module, that is, the NTBPI or
BPI settings in effect for the Natural session
initializing the NCI environment are taken.
For further details on the swap pool, see Natural Swap Pool in the Natural Operations documentation.
Natural CICS Interface remembers its permanent
GETMAINed storages, that is, storages acquired via EXEC CICS
GETMAIN SHARED in NCI system control records in CICS main temporary
storage.
These system control records are kept for two reasons:
System recovery:
As all NCI related storages are chained of the NCI system directory, the system control records can be used to re-construct storage chains in case of storage corruptions.
Clean up old NCI system after CICS NEWCOPY of NCI
system directory module:
At NCI system environment initialization, NCI checks for existing system control records, and, if found, NCI frees the associated permanent storages prior to the installation of the new environment.
The CICS temporary storage queue names of these control records are
prefixXCR, where prefix
is the common prefix for Natural CICS components (see NTCICSP
macro parameter PREFIX) and
X is a hexadecimal value, namely
x'01' |
for the main system control record
holding information about NCI system directory extension, shared threads
(TYPE=SHR), and secondary SIR blocks (see
NCMDIR generation parameter
USERS).
|
x'02' |
for the parms system control record
holding information about the NCI shared profile parameters retrieved via file
input (see the PRMDEST
parameter of the NTCICSP macro).
|
x'03' |
for the pools system control record holding information about all local pools belonging toe the NCI environment including a potential swap pool. |
Wichtig:
As the NCI system control records describe a local NCI
environment, these CICS MAIN temporary storage queues must be kept also in the
CICS AOR. This is particularly true when running Natural in CICSPlex.
The name of Natural CICS Interface system directory module is
prefix CB by default (see
PREFIX
parameter of the NTCICSP macro) unless specified explicitly via
the DIRNAME
parameter of the NTCICSP macro.
The NCIDIREX exit interface is to set/modify the name
of the Natural CICS Interface system directory module at run-time. This makes
it possible to use the same NCI driver/ Natural parameter module, but use
different NCI environments (thread groups/thread sizes, etc) by accessing
different system directory modules, depending for example on CICS system ID,
transaction ID.
The first 5 characters of the directory module name are also used as part of CICS temporary storage queue names related to the relevant NCI environment. So when running more than one Natural CICS environment in a CICS region, the relevant system directory module names must be different in the first 5 characters.
The NCIDIREX interface exit is called using standard
linkage conventions (Registers 13, 14, 15 and 1) but in addition with Registers
4 and 5 holding CICS EIB and EISTG addresses to enable the exit to call CICS
services.
Source module XNCIDIRX contains a sample
system directory module name exit.
Natural sessions may also be executed using distributed transaction
processing (DTP), that is, using APPC or MRO conversations. Formally, such
Natural sessions have a terminal associated (CICS TCTTE), however, this is a
terminal out of a pool (see CICS SESSIONs / CONNECTIONs) and the
"terminal" may change from Natural dialog step to dialog step,
that is, such "terminals" cannot be used as key to save a
session's context over a "screen I/O". Because of this nature,
such Natural sessions are treated by default as asynchronous sessions
(TTYPE=ASYN/ASYL), and Natural does not deal/communicate with
these terminals, as they are no 3270 devices.
However, there is an exit interface NCIDTPEX available,
which allows you to run the Natural session in a "conversational
way":
when the exit is available, Natural sets up a terminal session
(TTYPE=3270);
Natural terminal input and output operations
(RECEIVE/SEND/CONVERSE) are not handled by Natural, but
passed to the exit for further processing.
The source modules XNCIDTPX and
XNCITIOX contain
samples of DTP terminal exits.
You can set the FDTPX
generation parameter of the NTCICSP macro to ON to
cause a potential DTP exit to be invoked for all terminal types. This can be
helpful, for example, if you want to analyze terminal output before a
EXEC CICS SEND operation is executed, or if you want
to suppress screen I/O.
The 4-character CICS terminal ID which is unique per CICS region is
used by Natural CICS Interface as part of the session key (SIP server, roll
server, CICS temporary storage queues). For compatibility with Natural, Natural
CICS Interface uses an 8-character field. This NCI terminal ID can be made
unique over several CICS regions by appending the CICS system ID to the CICS
terminal ID (see UNITID
parameter of the NTCICSP macro).
Alternatively, the NCITIDEX terminal ID exit interface
can be used to set that NCI terminal ID. It should be noted that for CICS
purposes (for example, temporary storage queue names, etc) just the first four
characters of the NCI terminal ID are taken. Therefore these 4-character
strings must be unique.
The NCITIDEX exit interface is particularly interesting
for session managers under CICS in order to distinguish multiple Natural
sessions running at the same physical terminal.
The terminal ID set by a NCITIDEX exit is used
"externally" by Natural CICS Interface and is the default for the
Natural system variable *INIT-ID
for Natural use. (The *INIT-ID system variable can
subsequently be modified by the NCIUIDEX /
NATUEX1 user ID
exit interface.)
The NCITIDEX interface exit is called by using standard
linkage conventions (Registers 13, 14, 15 and 1), but in addition by using the
Registers 4 and 5 holding CICS EIB and EISTG addresses to enable the exit to
call CICS services.
Source module XNCITIDX contains a sample
terminal ID exit.
Certain Natural CICS Interface functions cannot work if the first four characters of the logical terminal ID do not match the physical terminal.
As a consequence,
you cannot send a message to a logical terminal by way of message switching,
you cannot use the SYSTP utility or NEP to flush a session at a logical terminal.
Natural provides the
NATUEX1 user
exit interface to determine whether or not a user is authorized to use Natural
and to set various Natural system variables.
Whenever a Natural user session is started, the NATUEX1
interface exit is called using standard linkage conventions (Registers 13, 14,
15 and 1).
In a CICS environment, the standard linkage conventions are not sufficient in order to issue CICS service calls and to obtain addressability of CICS control blocks.
Therefore, Natural CICS Interface delivers the load module
NCIUEX1 as a NATUEX1 interface exit in a CICS
environment. This module just sets up addressability in CICS and calls the
NCIUIDEX interface exit by using standard linkage conventions
(Registers 13, 14, 15 and 1), but in addition by passing CICS related addresses
in other registers: R4 (EIB), R5 (EISTG), R6
(TCTTE).
Thus, if you want to issue requests requiring addressability of the
CICS environment, the NCIUIDEX user ID exit interface should be
used rather than the standard NATUEX1 interface.
Source module XNCIUIDX contains a sample user
ID exit.
Wichtig:
With each installation of a new CICS release, the
NCIUIDEX interface exit must be reassembled and
linked.
By default, Natural always uses the transaction ID the
pseudo-conversational session was started with. This transaction ID can be
changed within Natural by using CALLNAT CMTRNSET (library
SYSEXTP). The NCIXIDEX transaction ID exit interface
can also be used to change the Natural pseudo-conversational transaction
ID.
The NCIXIDEX interface exit is called by using standard
linkage conventions (Registers 13, 14, 15 and 1), but in addition by using the
Registers 4 and 5 holding CICS EIB and EISTG addresses to enable the exit to
call CICS services. Source module XNCIXIDX contains a sample
transation ID exit.
Anmerkung:
The transaction ID exit is only invoked prior to
pseudo-conversational screen I/O under control of Natural CICS Interface; that
is, the exit is not invoked for conversational screen I/O (for example,
SET CONTROL 'N') or when Natural is invoked from a front-end
program via EXEC CICS LINK.
The following topics are covered:
The dynamic parameter
TPF=(TPF1,TPF2,TPF3,TPF4,TPF5,TPF6,TPF7,TPF8) can be set for
driver-specific options by specifying "1" for the
corresponding option.
Supported options are:
TPF1
|
Invoke Adabas linkage module via EXEC CICS
LINK with Adabas parameter in TWA and CICS COMMAREA rather than via DCI.
Enables debugging of Adabas-related problems via CEDF. |
TPF2
|
Dump the whole Natural swap pool. With this parameter setting, the entire Natural swap pool is included in a CICS transaction dump. |
TPF3
|
Dump the whole Natural buffer pool. With this parameter setting, the entire Natural buffer pool is included in a CICS transaction dump. Anmerkung: |
TPF4
|
Dump the whole EDITOR buffer pool.
With this parameter setting, the EDITOR buffer pool is included in a CICS transaction dump. |
TPF6
|
Handle terminal I/O errors by NCI.
With this parameter setting, NCI will not pass control
back to Natural for terminal I/O errors, but will handle it by itself, which
results in one of the error messages |
TPF7
|
Force abend in case of NCI system errors.
With this parameter setting, a program check is forced
in case of |
When specifying 0 (which can also be omitted), the
corresponding option is not set, for example:
TPF=(0,0,0,1) which is equivalent to
TPF=(,,,1)
Natural CICS Interface reacts on certain settings of the Natural
profile parameter UPSI:
With profile parameter ETRACE=ON or
ETRACE=(ON,NOGTF):
UPSI=XXXX10XX causes all CMTRACE trace records
to be written to the Natural CICS Interface message destination (see the
MSGDEST
parameter of the NTCICSP macro) in addition to the CICS trace
(message number NCI0110).
UPSI=XXXX11XX causes all CMTRACE trace records to
be written to the console (WTO) in addition to the CICS trace.
If the first 5 characters in the dynamic parameter string for
starting Natural are ASYN,, Natural CICS Interface will always
setup an asynchronous Natural session, regardless of whether a terminal or
non-terminal session is started.
This may be helpful for testing purposes, particularly with EDF or with other debugging tools installed.
The Natural transactions are all defined with a TWA size of 128 bytes, although Natural CICS Interface just uses the first 88 bytes of the CICS transaction work area (TWA) for Natural processing of the following functions:
on calling Adabas for the Adabas parameter list (up to 32 bytes), Natural CICS Interface saves the TWA contents before calling Adabas and restores it after the Adabas call.
on calling external programs for the parameter list address
pointers (up to 20 bytes, see the Natural
CALL
statement), Natural CICS Interface saves the TWA contents before calling the
external program and restores the TWA call portion after the external program
call.
on invoking a back-end program for the termination message and potential termination data (80 bytes, see Back-End Program Calling Conventions in the Natural Operations documentation).
on returning control to a "LINK" front-end caller for the termination message and potential termination data at session end and the termination message area fully reset to low-value at Natural dialog step end respectively, that is, 80 bytes at session and dialog step end.
for passing LE information at CICS task start (up to 88 bytes, just at start of task).
User programs (front-end, back-end, called external programs) can also take advantage of the CICS TWA to communicate besides Natural, but they should not use the TWA portion used by Natural; for such cases, it is higly recommended to increase the TWA size of the Natural transactions and use TWA portions outside the first 128 bytes.