This document contains special considerations that refer to Natural in batch mode under the operating system z/VSE.
The section covers the following topics:
For considerations that refer to Natural in batch mode generally, see also:
The Natural z/VSE batch interface consists of the object modules
NATVSE, NATVSEL and NATLEOPT. They are
linked to the Natural nucleus during the installation procedure for base
Natural as described in the Installation for z/VSE
documentation.
You can customize the Natural z/VSE batch interface to meet your
requirements by changing the parameter settings in the
NTVSEP macro in the Natural parameter module during the
appropriate installation step.
The batch interface must run below the 16 MB line. Multiple sessions can be started in parallel within one batch region; see Subtasking Session Support for Batch Mode Environments.
For information on the driver parameters that are available for
z/VSE in batch mode, refer to the description of profile parameter
VSEP or
parameter macro NTVSEP
in the Parameter Reference documentation.
The following data sets are required if certain functions are used during a Natural z/VSE batch mode session:
| Data Set | Explanation |
|---|---|
CMEDIT
|
Software AG Editor Work File |
CMHCOPY
|
Hardcopy Print Output |
CMOBJIN
|
Input for Natural INPUT Statements
|
CMPLOG
|
Dynamic Profile Parameter Report Output |
CMPRINT
|
Primary Report Output |
CMPRMIN
|
Dynamic Profile Parameter Input |
CMPRTnn
|
Additional Reports 01-31 |
CMSYNIN
|
Primary Command Input |
CMTRACE
|
External Trace Output |
CMWKFnn
|
Work Files 01-32 |
These data sets are described below.
The Software AG Editor work file VSAM data set is required if a local or global Software AG editor buffer pool is to be used.
If not defined in the JCL, the name of the Editor work file
specified by the subparameter DSNAME of
profile parameter EDBP or parameter
macro NTEDBP
is used by Natural to do the dynamic allocation for the Editor work file.
Alternatively, profile parameter
EDPSIZE
can be used to run with an auxiliary editor buffer pool, which does not require
an editor work file. For more information about the installation of the
Software AG editor, see Installing Software AG Editor on
z/VSE in the Installation for z/VSE
documentation.
The default name of the hardcopy print output data set is
CMHCOPY. It can be changed by one of the following:
the subparameter DEST of
profile parameter PRINT for Print File
0,
the profile parameter HCDEST, which is an
equivalent of PRINT=((0),DEST=...),
the setting of the system variable
*HARDCOPY
during the session,
the terminal command %H during the
session.
The subparameters of the profile parameter
PRINT for
Print File 0 can be used to change the default values for the hardcopy data
set. The default data set name CMHCOPY implies
CLOSE=FIN
for the hardcopy print data set, that is, after the data set has been opened
for output, any subsequent change of the hardcopy print output data set name
will not be honored. If a different name is defined at open time, the hardcopy
data set will be closed according to the subparameter
CLOSE of
profile parameter PRINT for Print File
0.
By default, the CMHCOPY file is assigned to
SYSLST and is processed via the macro DTFPR.
If appropriate label information is supplied for the file name
CMHCOPY, the print output may also be routed to disk or tape by
using the z/VSE macro DTFSD or DTFMT with:
RECFORM=UNDEF,BLKSIZE=133
When routed to a z/VSE library, the record format is fixed, the
record length is 80 and the default member type is PRINT.
CMOBJIN is used for data intended to be read by
Natural INPUT
statements. This type of data can alternatively be placed in the
CMSYNIN input
stream immediately following the relevant source program or the relevant
RUN or EXEC command.
When the setting for the profile parameter
OBJIN is
N, Natural reads input from CMSYNIN. When
OBJIN is set to Y, Natural reads input from
CMOBJIN. When OBJIN is set to R, Natural
determines which option has been selected for a particular session depending
upon the presence or absence of a CMOBJIN label information.
By default, the CMOBJIN input file is assigned to
SYSIPT. By using the profile parameter
READER, it
can be assigned to SYSRDR.
Alternatively, a sequential disk or labeled tape file may be used
rather than a real/logical (POWER) reader file. In that case, you
must supply appropriate label information for file name
CMOBJIN.
Supported file formats are:
DTFSD/DTFMT: RECFORM=FIXUNB,RECSIZE=81 DTFSD/DTFMT: RECFORM=FIXUNB/FIXBLK,RECSIZE=80 LIBR: RECFORM=FIX,RECSIZE=80 , default member type CARD
You must supply appropriate label information; for assignment, you
have to use file names CMSYNIN and /or
CMOBJIN.
If profile parameter PLOG=ON is set and
data set CMPLOG is available, the evaluated dynamic profile
parameters are written to this data set during session initialization. If data
set CMPLOG is not available, the evaluated dynamic profile
parameters are written to CMPRINT.
By default, the CMPLOG file is assigned to
SYSLST and is processed with the macro DTFPR.
If appropriate label information is supplied for the file name
CMPLOG, the print output may also be routed to disk or tape by
using the z/VSE macros DTFSD or DTFMT with:
RECFORM=UNDEF,BLKSIZE=133
When routed to a z/VSE library, the record format is fixed, the
record length is 80 and the default member type is PRINT.
CMPRINT is used for the primary output report
resulting from DISPLAY,
PRINT and
WRITE statements in a
Natural program.
By default, the CMPRINT file is assigned to
SYSLST and is processed via the macro DTFPR.
If appropriate label information is supplied for the file name
CMPRINT, the print output may also be routed to disk or tape by
using the z/VSE macro DTFSD or DTFMT with:
RECFORM=UNDEF,BLKSIZE=133
When routed to a z/VSE library, the record format is fixed, the
record length is 80 and the default file type is PRINT.
CMPRMIN can be used as a dynamic parameter data set
to overcome the length restriction for the character string in the job control
PARM keyword of the EXEC statement.
If available, this file is read during session initialization to get the dynamic profile parameters.
All input records from CMPRMIN are concatenated into
one parameter string. Only the first 72 positions of each CMPRMIN
record are significant. Trailing blanks at the end of each record are
truncated; if the last non-blank character is a comma, all trailing blanks are
truncated, else just one blank is left for delimiter; no commas are
inserted.
Additional dynamic parameters can be supplied using the job
control PARM keyword: if the PARM keyword contains a
dynamic parameter string, these profile parameters are concatenated at the end
of the parameter string which was built from the input of CMPRMIN,
i.e. these can be used to overwrite the parameters from CMPRMIN.
If the PARM keyword is specified as SYSRDR or
SYSIPT, Natural retrieves additional profile parameters from
SYSRDR or SYSIPT respectively as a logical extension
of the CMPRMIN data set, i.e. the same rules apply.
CMPRMIN is a sequential disk or a labeled tape data
set. Supported file formats are:
DTFSD/DTFMT: RECFORM=FIXUNB,RECSIZE=81 DTFSD/DTFMT: RECFORM=FIXUNB/FIXBLK,RECSIZE=80 LIBR: RECFORM=FIX,RECSIZE=80 , default member type CARD
CMPRTnn is used for each
additional report referenced by any Natural program compiled or executed during
the session. "nn" must be a two-digit decimal number
in the range 01-31 corresponding to the report number used in a
DISPLAY,
PRINT or
WRITE statement.
Instead of CMPRTnn,
another file name may be used by setting the DEST
subparameter of profile parameter PRINT to an
appropriate value, for example:
PRINT=((nn),...,DEST=PRNTFIL)
When supplying label information with file name
CMPRTnn, the print output can be
written to a disk or tape. Natural treats this print file like an unblocked
fixed-length work file. When "printing" to disk or tape, the same
logic as for work files applies (see below).
When mapped to a z/VSE library member, the record format is fixed,
the record length is 80 and the default file type for these files is
PRINT.
CMSYNIN is used for the primary input file that
contains Natural commands, Natural source programs, and (optionally) data to be
read by INPUT
statements during the execution of Natural programs.
By default, the CMSYININ input file is assigned to
SYSRDR. By using the profile parameter
READER, it
may be assigned to SYSIPT.
Alternatively, a sequential disk or labeled tape file may be used
rather than a real/logical (POWER) reader file. In that case, you
must supply appropriate label information for file name
CMSYNIN.
Supported file formats are:
DTFSD/DTFMT: RECFORM=FIXUNB,RECSIZE=81 DTFSD/DTFMT: RECFORM=FIXUNB/FIXBLK,RECSIZE=80 LIBR: RECFORM=FIX,RECSIZE=80 , default member type CARD
If profile parameter ETRACE is set to
"ON" or the equivalent terminal command
%TRE+
was issued, any Natural trace output during the session is written to the
CMTRACE data set. To define the Natural components that are to be
traced, the profile parameter TRACE is
required.
By default, the CMTRACE file is assigned to
SYSLST and is processed via the macro DTFPR.
If appropriate label information is supplied for the file name
CMTRACE, the print output may also be routed to disk or tape by
using the z/VSE macro DTFSD or DTFMT with:
RECFORM=UNDEF,BLKSIZE=133
When routed to a z/VSE library, the record format is fixed, the
record length is 80 and the default member type is PRINT.
CMWKFnn is used for each
Natural work file referenced by any Natural program compiled or executed during
the session. nn must be a two-digit
decimal number in the range 01 - 32 corresponding to the number used in a
READ WORK FILE or
WRITE WORK FILE
statement.
Instead of CMWKFnn,
another file name may be used by setting the
DEST
subparameter of profile parameter WORK to an
appropriate value.
If the subparameter FILMNGR of profile
parameter VSEP or macro
NTVSEP
is set to YES, and there is label information for a work file, or
if OFF or NOTM is specified for the
LABEL
subparameter of profile parameter WORK for an
unlabeled work file, Natural knows the file is available. Otherwise, the
Natural work-file logical-unit number must be assigned to the correct device
type.
When mapped to a z/VSE library member, the record format is fixed,
the record length is 80 and the default member type for these files is
WORK.
If a Natural printer or work file is assigned IGN,
all I/O requests for these files are treated as dummy and no Natural error is
generated. However, if there is no assignment or the printer/work file is
assigned UA, any attempt to use this file is treated as an
error.
NATVSE supports access to z/VSE library members for
input and/or output for all Natural data sets. When a z/VSE library member is
accessed, only "card image format" is supported, that is, a record
length of 80 bytes.
The access to a z/VSE library member is triggered via the file ID of
an associated DLBL statement. A special string (see subparameter
LIBRID of
profile parameter VSEP or macro
NTVSEP)
at the start of the file ID field in the DLBL statement signals that the
Natural data set actually is a z/VSE library member which is specified in the
remainder of the file ID field.
The following specifications are possible:
C=chain |
Specifies a library concatenation chain defined in JCL. |
S=library.sublib |
Specifies a specific sublibrary in a specific library. |
M=mbrname.mbrtype |
Specifies a library member name and its type. |
The following rules apply:
All these possible specifications are optional.
Each parameter may be specified only once.
The parameters are separated by one or more commas or blanks.
Chain (C=) and sublibrary (S=)
specifications are optional, but mutually exclusive when specified.
If neither a chain (C=) nor a sublibrary
(S=) is specified, a default of C=SOURCE is
taken.
If a library member (M=) is not specified, a
default of M=filename.type is taken,
where
filename is the
file name of the DLBL statement and
type indicates
the Natural file class, namely WORK for Natural work files,
PRINT for Natural print files and CARD for the
Natural input files CMPRMIN,
CMSYNIN and
CMOBJIN (the
relevant default member type for every Natural data set is mentioned
below).
An asterisk specified for any sub-parameter of the library
member specification signals the default to be taken; hence a specification of
M=*.* has the same effect as omitting this parameter.
Omitting the member type subparameter also means the default to be taken.
Example:
// LIBDEF PROC,SEARCH=(...) // LIBDEF SOURCE,SEARCH=(...) // DLBL CMWKF01,'LIBR:M=FILE1.TEST S=SAGLIB.USRLIB' // DLBL CMWKF02,'LIBR: S=SAGLIB.USRLIB' -> M=CMWKF02.WORK // DLBL CMWKF03,'LIBR: M=TEST C=PROC' -> M=TEST.WORK // DLBL CMPRT04,'LIBR:M=*.LISTING,S=SAGLIB.USRLIB' -> M=CMPRT04.LISTING // DLBL CMPRT05,'LIBR:' -> M=CMPRT05.PRINT,C=SOURCE // DLBL CMPRT06,'LIBR:M=WORK' -> M=WORK.PRINT,C=SOURCE // DLBL CMWKF07,'LIBR: M=*.DATA' -> M=CMWKF07.DATA,C=SOURCE // DLBL CMPRMIN,'LIBR:M=*.*' -> M=CMPRMIN.CARD,C=SOURCE
Anmerkungen:
DLBL statement is just 44
characters in length, which is not enough to specify all (sub)parameters in
their full length. Therefore it is recommended to take advantage of the
defaults. Regarding the member name, there is also the option to specify the
file name via the DEST
subparameter of the Natural profile parameter
PRINT or
WORK.
Natural supports up to 35 print files per session, namely the system
print files CMPRINT,
CMTRACE,
CMPLOG and
CMHCOPY, plus
"application" print files 1 to 31. POWER on the other side just
supports up to 8 logical printers per VSE partition. This means, it is not
possible to create more than 8 separate reports in parallel from a Natural
program in one partition. This bottleneck becomes worse in multi-tasking or
Natural server environments, where up to 32 Natural tasks may run in parallel
in one VSE partition. That limitation can be overcome by accessing POWER SPOOL
directly; that is, instead of LIOCS services, NATVSE uses
"PUTSPOOL" services to create reports in the POWER list queue.
The creation of a report directly in POWER SPOOL is triggered via
the file ID of an associated DLBL statement or a corresponding specification in
a Natural DEFINE
PRINTER statement. A special string (see subparameter
SPOOLID
of profile parameter VSEP or macro
NTVSEP)
at the start of the file ID field in the DLBL statement signals that the
Natural print file is not created by LIOCS services, but by
"PUTSPOOL" services.
For such print files, the keyword subparameters
NAME, FORMS,
DISP, COPIES,
CLASS, PRTY of the profile
parameter PRINT or the macro
NTPRINT
in the Natural parameter module are
sensitive; they can also be set via a DEFINE PRINTER statement.
When a report name is not specified, the print file name (DEST=)
is the default. For print files, where DEFINE PRINTER and the
(NT)PRINT profile do not apply, that is, CMPRINT,
CMTRACE and CMPLOG, the POWER list attributes can be
specified in the associated DLBL statement via keyword parameters, with the
following meanings:
C |
Class |
D |
Disposition |
F |
Forms |
N |
Name |
O |
Copies |
P |
Prty |
Example:
// DLBL CMPLOG,'SPL2PWR N=PARMSLOG,C=K,D=L,O=3,F=GREY' // DLBL CMPRT01,'SPL2PWR' // ASSGN SYS041,UA // ASSGN SYS042,UA ... PRINT=((1-2),AM=STD) PRINT=((1),NAME=REPORT1,CLASS=K,DISP=L,COPIES=3,FORMS=BLUE) ... EDT DEFINE PRINTER (2) OUTPUT '*' /* Prepare for DYNALLOC DEFINE PRINTER (2) OUTPUT 'DSN=SPL2PWR' NAME 'MYREPORT' CLASS 'K' DISP 'L' COPIES 3 FORMS 'PINK' WRITE (1) 'HELLO' WRITE (2) 'HELLO' END .E RUN
Natural under z/VSE offers functionality to define work files
dynamically, that is, these files need not be predefined in JCL. This means
that Natural under z/VSE adds labels into the partition's temporary labels area
for work files defined using a DEFINE
WORK FILE statement.
In this respect Natural under z/VSE does not modify existing label information. All file labels dynamically added by a Natural session are deleted at session termination.
The following topics are covered below:
A disk file manager is required, as it is not feasible to have fix file extent information within Natural application programs, particularly when these programs are executed in parallel in the same partition or in several partitions. This is not a restriction, as at least VSAM/SAM is available under z/VSE.
For dynamic allocation support by Natural under z/VSE, the
following keyword subparameters of Natural profile parameter
WORK have
been made sensitive:
The following keyword parameters are available for dynamic work files under VSE:
| Keyword Parameter | Purpose |
|---|---|
CAT=catalog
|
Triggers the usage for VSAM/SAM for the dynamic work
file, where catalog is the 1 to 7 characters VSAM catalog file name. As this
parameter is mandatory, if you want to use VSAM/SAM, you have to specify a VSAM
job catalog explicitly (CAT=IJSYSUC).
|
VOL=volser
|
If specified a // EXTENT information is
generated with that 1 to 5 characters volume serial number; its content depends
on the preceding DLBL information, see below.
|
DSN=fileid
|
Is the DSN to set the file ID (optional). |
Potential CAT or VOL
parameters have to come first in the DEFINE WORK FILE string, as
the end of the parameter value can easily be found; the DSN=
parameter must be specified as the last keyword parameter.
In other words, if CAT or
VOL parameters are specified, and the
DSN keyword parameter is not specified, all data in the
DEFINE WORK FILE parameter string behind the last keyword
parameter is considered as file ID to be set.
For VSAM/SAM, NATVSE dynamically adds the following label information:
// DLBL xxyyyyz,'file-id',0,VSAM,CAT=catalog, + RECORDS=n1,RECSIZE=n2,DISP=(dsp1,dsp2) // EXTENT ,volser optional
where:
| xx | is the partition's SYSLOG ID, for example
BG, F4, etc.
|
yyyy |
is the edited z/VSE two-byte hexadecimal task number (to allow Natural subtasks in the same partition). |
| z | is the Natural work file number: "1" through "9" for files 1 to 9, "A" through "W" for files 10 to 32. |
n1 |
is the value specified by the keyword subparameter
BLOCKS of
profile parameter WORK.
|
n2
|
is the value specified by the keyword subparameter
BLKSIZE
of profile parameter WORK.
|
dsp1, dsp2
|
is the value specified by the keyword subparameter
DISP
of profile parameter WORK.
|
catalog
|
is the VSAM catalog which has to be set using a
DEFINE WORK FILE
statement.
|
| volser | is the volume serial number on which the file is allocated. |
Note that the EXTENT card is only generated when
volser has been set in a DEFINE
WORK FILE statement in the Natural application.
For other disk file management systems, for example
CA-DYNAM/D, NATVSE adds dynamically the following
label information:
// DLBL xxyyyyz,'file-id',0 // EXTENTsysnnn,volser,,,1,n1 optional
where:
| xx | is the partition's SYSLOG ID, for example
BG, F4, etc.
|
| yyyy | is the edited z/VSE two-byte hexadecimal task number (to allow Natural subtasks in the same partition). |
| z | is the Natural work file number: 1 through
9 for files 1 to 9, A through W for
files 10 to 32.
|
n1
|
is the value specified by the keyword subparameter
BLOCKS of
profile parameter WORK.
|
sysnnn
|
is the value specified by the keyword subparameter
SYSNR of
profile parameter WORK.
|
volser
|
is the volume serial number on which the file is allocated. |
Note that the EXTENT card is only generated when
volser has been set in a
DEFINE WORK FILE
statement in the Natural application. If
n1 is zero, extent information (start
track/block and number of tracks/blocks) is omitted.
For Natural as a server the file name setup has the format:
xyyyyyz
where:
xyyyyy
|
is the server session number in hexadecimal format (edited) with the very first character forced alphabetic by translation of 0 through F into A to P. |
z
|
is the Natural work file number, as for normal Natural under z/VSE batch operation. |
Files to be dynamically allocated must have a Natural file name of
'*' set in keyword subparameter
DEST='*'
of profile parameter WORK or a statement
definition of DEFINE WORK
FILE '*' to enable Natural under z/VSE to create
new file names as described above.
The file identification to be used also has to be set using a
DEFINE WORK FILE statement.
The regular z/VSE restrictions for file IDs apply.
In a Natural multitasking or server environment, it is recommended to provide some unique information in the file ID to prevent "equal file" conditions.
Natural parameters:
WORK=((1-6),AM=1,DEST='*',BLOCKS=100),WORK=((2), DISP=(OLD,DELETE)),WORK=((6),BLOCKS=0)
Natural work file definition within application:
DEFINE WORK 1 'CAT=IJSYSUC,VSAM.SAM.FILE' DEFINE WORK 2 'CAT=IJSYSCT,DSN=ANOTHER FILE' DEFINE WORK 3 'CAT=IJSYSUC,VOL=DOSRES,ONE MORE FILE' DEFINE WORK 4 '==.CATALOGED.FILE' DEFINE WORK 5 'VOL=POOL01,DSN=FILE WITH EXTENT INFO' DEFINE WORK 6 'VOL=DOSRES,ANY FILE'
z/VSE labels generated:
// DLBL xxyyyy1,'VSAM.SAM.FILE',0,VSAM,CAT=IJSYSUC, + RECORDS=100,RECSIZE=4628,DISP=(NEW,KEEP) // DLBL xxyyyy2,'ANOTHER FILE',0,VSAM,CAT=IJSYSCT, + RECORDS=100,RECSIZE=4628,DISP=(OLD,DELETE) // DLBL xxyyyy3,'ONE NORE FILE',0,VSAM,CAT=IJSYSUC, + RECORDS=100,RECSIZE=4628,DISP=(NEW,KEEP) // EXTENT ,DOSRES // DLBL xxyyyy4,'==.CATALOGED.FILE',0 // DLBL xxyyyy5,'FILE WITH EXTENT INFO',0 // EXTENT SYS005,POOL01,,,1,100 // DLBL xxyyyy6,'ANY FILE',0 // EXTENT SYS006,DOSRES
The Natural z/VSE batch mode interface contains some debugging facilities which can help you to track down problems.
These facilities are controlled by the UPSI settings in
the JCL.
Additionally, the UPSI settings may also be specified
as a Natural profile parameter (UPSI=1XXXXXXX, for example). This
is useful if the UPSI settings in the JCL have produced side
effects in the sense that they have a different meaning for other programs such
as for front-end Natural or for programs called by Natural.
There may be the following UPSI settings:
| UPSI Setting | Meaning |
|---|---|
UPSI
1xxxxxxx |
Dump Flag |
UPSI
x1xxxxxx
|
Trace Flag |
UPSI
xx1xxxxx
|
Print Output Identification Flag |
UPSI
xxx1xxxx
|
Storage Freeze Flag |
UPSI
xxxxxx1x
|
Abend Exit Flag |
These settings are described below. In addition, a sample job is given to show you how to obtain documentation for debugging.
When Natural encounters a problem, the corresponding job usually
cancels without a dump, unless an abend actually occurred. When this
UPSI flag is set, a dump is always created at the end of the job
when an error occurs, that is, when the Natural session termination message is
other than NAT9995.
When this flag is set, snapshots are taken of the register save area at some strategic points in Natural.
Anmerkung:
Depending on the product sample output, setting this flag can
lead to large output.
On entry of all NATVSE service routines, the name of
this routine and the general registers 0 to 15 (GRG) are displayed.
Anmerkung:
You can identify the caller from Register 14.
On exit of all NATVSE service routines, the name of
this routine, the current general registers (GRG) and Registers 0 to 15 of the
currently assigned save area (CSA) are displayed.
Anmerkungen:
Whenever the GRG registers are set, the debugging trace program tries to determine the name of the calling routine and the offset of the call from the beginning of the routine.
The SYSnnn number for the
debugging trace print output is SYS040, as long as this
SYSnnn number is assigned to a printer
device; otherwise SYSLST is used. This is of particular interest
if debugging trace output and other Natural print output are to be separated;
to do so, assign SYS040 appropriately and supply a POWER *
$$ LST statement for this logical print unit.
When this flag is set, the VSE (sub)task ID is inserted into the last four bytes of a print record to help identify the task which printed the record.
Wichtig:
When this flag is set, potential print data may become
overwritten. Overwritten data is indicated by '...' preceding the VSE (sub)task
ID.
On normal or abnormal session termination, Natural, by default,
releases all its resources including storage. Despite the setting of UPSI
1, a dump may be useless, because all relevant storage has already been
released during Natural termination. When this flag is set, no
GETVIS storage acquired earlier is ever released within this job;
this applies to all external subroutine programs called by Natural including
the Natural nucleus (if not linked to NATVSE) and
RCA=ON subproducts.
 |
Warnung: This flag should be handled carefully, because more partition GETVIS storage is used, but jobs may still cancel due to
failed GETVIS requests if the operating system storage requests
cannot be satisfied. |
This flag may be helpful in the case of recurrent abends.
In batch mode, Natural usually has a check abend exit for active
programs (STXIT PC) to recover from program checks
(NAT095n error messages). When
DU=ON is
specified, this exit creates a snap dump and passes control to Natural for a
clean session termination.
When this flag is set, the Natural session runs without any abend exit for active programs, which means that all program checks are handled directly by the operating system.
If this flag is set, the dump flag, the storage freeze flag, the session abend flag and the formatted dump-only flag are ignored.
If a problem has to be analyzed, any information which might be relevant is important, in particular, the executed JCS and the corresponding console log.
The following sample job is intended to show you how to obtain comprehensive documentation:
// JOB sample job // OPTION LOG,PARTDUMP to see JCL on printer /* Library Definitions: labels and LIBDEFs ... /* ADARUN Parameter Input Definition // ASSGN SYS000,SYSRDR /* Natural Work File Definitions // DLBL CMWKFnn,'...',... disk work file // EXTENT SYSnnn,volser,,,nn,mm // ASSGN SYSnnn,DISK,VOL=volser,SHR // TLBL CMWKFnn,'...',... labeled tape work file // ASSGN SYSnnn,cuu assignment to tape unit /* Natural Print File Definitions // ASSGN SYSnnn,cuu assignment to print UR unit // DLBL CMPRTnn,'...',... print file on disk // EXTENT SYSnnn,volser,,,nn,mm // ASSGN SYSnnn,DISK,VOL=volser,SHR // TLBL CMPRTnn,'...',... print file on labeled tape // ASSGN SYSnnn,cuu assignment to tape unit /* Debugging Options // ASSGN SYS040,SYSLST debugging trace unit // UPSI 1xxx00xx flags as discussed above // EXEC NATURAL,SIZE=... ... dynamic parameters /* end of dynamic parameters ... ADARUN parameters /* end of ADARUN parameters ... Natural input /* end of Natural input // EXEC LISTLOG print console messages /& end of job
The Natural z/VSE batch mode interface (NATVSE)
supports attention interrupts via the console command MSG
xx, where xx is
the z/VSE partition ID a console operator can force on a NAT1016 attention
interrupt event.
This special functionality is controlled by the Natural profile
parameter ATTN.