Logical Condition Criteria

This document describes purpose and use of logical condition criteria that can be used in the statements FIND, READ, HISTOGRAM, ACCEPT/REJECT, IF, DECIDE FOR, REPEAT.

The following topics are covered:

• Introduction

• Relational Expression

• Extended Relational Expression

• Evaluation of a Logical Variable

• Fields Used within Logical Condition Criteria

• Logical Operators in Complex Logical Expressions

• BREAK Option - Compare Current Value with Value of Previous Loop Pass

• IS Option - Check whether Content of Alphanumeric or Unicode Field can be Converted

• MASK Option - Check Selected Positions of a Field for Specific Content

• MASK Option Compared with IS Option

• MODIFIED Option - Check whether Field Content has been Modified

• SCAN Option - Scan for a Value within a Field

• SPECIFIED Option - Check whether a Value is Passed for an Optional Parameter

Introduction

The basic criterion is a relational expression. Multiple relational expressions may be combined with logical operators (AND, OR) to form complex criteria.

Arithmetic expressions may also be used to form a relational expression.

Logical condition criteria can be used in the following statements:

Relational Expression

Syntax:

Operand Definition Table:

For an explanation of the Operand Definition Table shown above, see Syntax Symbols and Operand Definition Tables in the Statements documentation.

In the "Possible Structure" column of the table above, "E" stands for arithmetic expressions; that is, any arithmetic expression may be specified as an operand within the relational expression. For further information on arithmetic expressions, see arithmetic-expression in the COMPUTE statement description.

Explanation of the comparison operators:

Examples of Relational Expressions:

IF NAME = 'SMITH'
IF LEAVE-DUE GT 40
IF NAME = #NAME

For information on comparing arrays in a relational expression, see Processing of Arrays.

Arithmetic Expressions in Logical Conditions

The following example shows how arithmetic expressions can be used in logical conditions:

IF #A + 3 GT #B - 5 AND #C * 3 LE #A + #B

Handles in Logical Conditions

If the operands in a relation expression are handles, only EQUAL and NOT EQUAL operators may be used.

SUBSTRING Option in Relational Expression

Syntax:

Operand Definition Table:

With the SUBSTRING option, you can compare a part of an alphanumeric, a binary or a Unicode field. After the field name (operand1) you specify first the starting position (operand3) and then the length (operand4) of the field portion to be compared.

Also, you can compare a field value with part of another field value. After the field name (operand2) you specify first the starting position (operand5) and then the length (operand6) of the field portion operand1 is to be compared with.

You can also combine both forms, that is, you can specify a SUBSTRING for both operand1 and operand2.

Examples:

The following expression compares the 5th to 12th position inclusive of the value in field #A with the value of field #B:

SUBSTRING(#A,5,8) = #B

- where 5 is the starting position and 8 is the length.

The following expression compares the value of field #A with the 3rd to 6th position inclusive of the value in field #B:

#A = SUBSTRING(#B,3,4)

Extended Relational Expression

Syntax:

Operand Definition Table:

^* Mathematical functions and system variables are permitted. Break functions are not permitted.

operand3 can also be specified using a MASK or SCAN option; that is, it can be specified as:

For details on these options, see the sections MASK Option and SCAN Option.

Examples:

IF #A = 2 OR = 4 OR = 7
IF #A = 5 THRU 11 BUT NOT 7 THRU 8

Evaluation of a Logical Variable

Syntax:

This option is used in conjunction with a logical variable (format L). A logical variable may take the value TRUE or FALSE. As operand1 you specify the name of the logical variable to be used.

Operand Definition Table:

Example of Logical Variable:

** Example 'LOGICX05': Logical variable in logical condition
************************************************************************
DEFINE DATA LOCAL
1 #SWITCH (L)  INIT <true>
1 #INDEX  (I1)
END-DEFINE
*
FOR #INDEX 1 5
  WRITE NOTITLE #SWITCH (EM=FALSE/TRUE) 5X 'INDEX =' #INDEX
  WRITE NOTITLE #SWITCH (EM=OFF/ON) 7X 'INDEX =' #INDEX
  IF #SWITCH
    MOVE FALSE TO #SWITCH
  ELSE
    MOVE TRUE TO #SWITCH
  END-IF
  /*
  SKIP 1
END-FOR
END

Output of Program LOGICX05:

TRUE     INDEX =    1
ON       INDEX =    1
 
FALSE    INDEX =    2
OFF      INDEX =    2
 
TRUE     INDEX =    3
ON       INDEX =    3
 
FALSE    INDEX =    4
OFF      INDEX =    4
 
TRUE     INDEX =    5
ON       INDEX =    5

Fields Used within Logical Condition Criteria

Database fields and user-defined variables may be used to construct logical condition criteria. A database field which is a multiple-value field or is contained in a periodic group can also be used. If a range of values for a multiple-value field or a range of occurrences for a periodic group is specified, the condition is true if the search value is found in any value/occurrence within the specified range.

Each value used must be compatible with the field used on the opposite side of the expression. Decimal notation may be specified only for values used with numeric fields, and the number of decimal positions of the value must agree with the number of decimal positions defined for the field.

If the operands are not of the same format, the second operand is converted to the format of the first operand.

Example:

 IF 0 = 0.5  	 /* is true because 0.5 (operand2) is converted to 0 (format I of operand1)
 IF 0.0 = 0.5  /* is false 
 IF 0.5 = 0  	 /* is false 
 IF 0.5 = 0.0  /* is false 

The following table shows which operand formats can be used together in a logical condition:

Notes:

1. [1] where GH = GUI handle, OH = object handle.
2. [2] The binary value will be assumed to contain Unicode code points, and the comparison is performed as for a comparison of two Unicode values. The length of the binary field must be even.

If two values are compared as alphanumeric values, the shorter value is assumed to be extended with trailing blanks in order to get the same length as the longer value.

If two values are compared as binary values, the shorter value is assumed to be extended with leading binary zeroes in order to get the same length as the longer value.

If two values are compared as Unicode values, trailing blanks are removed from both values before the ICU collation algorithm is used to compare the two resulting values. See also Logical Condition Criteria in the Unicode and Code Page Support documentation.

Comparison Examples:

A1(A1) := 'A'            
A5(A5) := 'A    '        
B1(B1) := H'FF'          
B5(B5) := H'00000000FF'  
U1(U1) := UH'00E4'       
U2(U2) := UH'00610308'   
IF A1 = A5 THEN ...                 /* TRUE 
IF B1 = B5 THEN ...                 /* TRUE
IF U1 = U2 THEN ...                 /* TRUE 

If an array is compared with a scalar value, each element of the array will be compared with the scalar value. The condition will be true if at least one of the array elements meets the condition (OR operation).

If an array is compared with an array, each element in the array is compared with the corresponding element of the other array. The result is true only if all element comparisons meet the condition (AND operation).

See also Processing of Arrays.

Examples of Logical Condition Criteria:

FIND EMPLOYEES-VIEW WITH CITY = 'BOSTON' WHERE SEX = 'M'
READ EMPLOYEES-VIEW BY NAME WHERE SEX = 'M'
ACCEPT IF LEAVE-DUE GT 45
IF #A GT #B THEN COMPUTE #C = #A + #B
REPEAT UNTIL #X = 500

Logical Operators in Complex Logical Expressions

Logical condition criteria may be combined using the Boolean operators AND, OR, and NOT. Parentheses may also be used to indicate logical grouping.

The operators are evaluated in the following order:

The following logical-condition-criteria may be combined by logical operators to form a complex logical-expression:

• Relational expressions

• Extended relational expressions

• MASK option

• SCAN option

• BREAK option

The syntax for a logical-expression is as follows:

Examples of Logical Expressions:

FIND STAFF-VIEW WITH CITY = 'TOKYO'
     WHERE BIRTH GT 19610101 AND SEX = 'F'
IF NOT (#CITY = 'A' THRU 'E')

For information on comparing arrays in a logical expression, see Processing of Arrays.

BREAK Option - Compare Current Value with Value of Previous Loop Pass

The BREAK option allows the current value or a portion of a value of a field to be compared with the value contained in the same field in the previous pass through the processing loop.

Syntax:

Operand Definition Table:

Syntax Element Description:

BREAK FIRST-NAME /1/

Example of BREAK Option:

** Example 'LOGICX03': BREAK option in logical condition
************************************************************************
DEFINE DATA LOCAL
1 EMPLOY-VIEW VIEW OF EMPLOYEES
  2 NAME
  2 FIRST-NAME
  2 BIRTH
*
1 #BIRTH (A8)
END-DEFINE
*
LIMIT 10
READ EMPLOY-VIEW BY BIRTH
  MOVE EDITED BIRTH (EM=YYYYMMDD) TO #BIRTH
  /*
  IF BREAK OF #BIRTH /6/
    NEWPAGE IF LESS THAN 5 LINES LEFT
    WRITE / '-' (50) /
  END-IF
  /*
  DISPLAY NOTITLE BIRTH (EM=YYYY-MM-DD) NAME FIRST-NAME 
END-READ 
END

Output of Program LOGICX03:

  DATE            NAME              FIRST-NAME
   OF
 BIRTH
---------- -------------------- --------------------
  
1940-01-01 GARRET               WILLIAM
1940-01-09 TAILOR               ROBERT
1940-01-09 PIETSCH              VENUS
1940-01-31 LYTTLETON            BETTY
 
--------------------------------------------------
  
1940-02-02 WINTRICH             MARIA
1940-02-13 KUNEY                MARY
1940-02-14 KOLENCE              MARSHA
1940-02-24 DILWORTH             TOM
 
--------------------------------------------------
 
1940-03-03 DEKKER               SYLVIA
1940-03-06 STEFFERUD            BILL

IS Option - Check whether Content of Alphanumeric or Unicode Field can be Converted

Syntax:

This option is used to check whether the content of an alphanumeric or Unicode field (operand1) can be converted to a specific other format.

Operand Definition Table:

The format for which the check is performed can be:

When the check is performed, leading and trailing blanks in operand1 will be ignored.

The IS option may, for example, be used to check the content of a field before the mathematical function VAL (extract numeric value from an alphanumeric field) is used to ensure that it will not result in a runtime error.

Example of IS Option:

** Example 'LOGICX04': IS option as format/length check
************************************************************************
DEFINE DATA LOCAL
1 #FIELDA (A10)          /* INPUT FIELD TO BE CHECKED
1 #FIELDB (N5)           /* RECEIVING FIELD OF VAL FUNCTION
1 #DATE   (A10)          /* INPUT FIELD FOR DATE
END-DEFINE
*
INPUT #DATE #FIELDA
IF #DATE IS(D)
  IF #FIELDA IS (N5)
    COMPUTE #FIELDB = VAL(#FIELDA)
    WRITE NOTITLE 'VAL FUNCTION OK' //  '=' #FIELDA '=' #FIELDB
  ELSE
    REINPUT 'FIELD DOES NOT FIT INTO N5 FORMAT'
            MARK *#FIELDA
  END-IF
ELSE
  REINPUT 'INPUT IS NOT IN DATE FORMAT (YY-MM-DD) '
          MARK *#DATE
END-IF
*
END

Output of Program LOGICX04:

#DATE 150487    #FIELDA
 
 
 
 
 
 
 
 
 
INPUT IS NOT IN DATE FORMAT (YY-MM-DD)

MASK Option - Check Selected Positions of a Field for Specific Content

With the MASK option, you can check selected positions of a field for specific content.

The following topics are covered below:

• Constant Mask

• Variable Mask

• Characters in a Mask

• Mask Length

• Checking Dates

• Checking Against the Content of Constants or Variables

• Range Checks

• Checking Packed or Unpacked Numeric Data

Constant Mask

Syntax:

Operand Definition Table:

operand2 can only be used if the mask-definition contains at least one X. operand1 and operand2 must be format-compatible:

• If operand1 is of format A, operand2 must be of format A, B, N or U.

• If operand1 is of format U, operand2 must be of format A, B, N or U.

• If operand1 is of format N or P, operand2 must be of format N or P.

An X in the mask-definition selects the corresponding positions of the content of operand1 and operand2 for comparison.

Variable Mask

Apart from a constant mask-definition (see above), you may also specify a variable mask definition.

Syntax:

Operand Definition Table:

The content of operand2 will be taken as the mask definition. Trailing blanks in operand2 will be ignored.

• If operand1 is of format A, N or P, operand2 must be of format A.

• If operand1 is of format U, operand2 must be of format U.

Characters in a Mask

The following characters may be used within a mask definition (the mask definition is contained in mask-definition for a constant mask and operand2 for a variable mask):

IF #FIELD = MASK (*'E'/)

Mask Length

The length of the mask determines how many positions are to be checked.

Example:

DEFINE DATA LOCAL
1 #CODE (A15)
END-DEFINE
...
IF #CODE = MASK (NN'ABC'....NN)
...

In the above example, the first two positions of #CODE are to be checked for numeric content. The three following positions are checked for the contents ABC. The next four positions are not to be checked. Positions ten and eleven are to be checked for numeric content. Positions twelve to fifteen are not to be checked.

Checking Dates

Only one date may be checked within a given mask. When the same date component (JJJ, DD, MM, YY or YYYY) is specified more than once in the mask, only the value of the last occurrence is checked for consistency with other date components.

When dates are checked for a day (DD) and no month (MM) is specified in the mask, the current month will be assumed.

When dates are checked for a day (DD) or a Julian day (JJJ) and no year (YY or YYYY) is specified in the mask, the current year will be assumed.

When dates are checked for a 2-digit year (YY), the current century will be assumed if no Sliding or Fixed Window is set. For more details about Sliding or Fixed Windows, refer to profile parameter YSLW in the Parameter Reference.

Example 1:

MOVE 1131 TO #DATE (N4)
IF #DATE = MASK (MMDD)

In this example, month and day are checked for validity. The value for month (11) will be considered valid, whereas the value for day (31) will be invalid since the 11th month has only 30 days.

Example 2:

IF #DATE(A8) = MASK (MM'/'DD'/'YY)

In this example, the content of the field #DATE is be checked for a valid date with the format MM/DD/YY (month/day/year).

Example 3:

IF #DATE (A8) = MASK (1950-2020MMDD)

In this example, the content of field #DATE is checked for a four-digit number in the range 1950 to 2020 followed by a valid month and day in the current year.

IF #DATE (A8) = MASK (YYYYMMDD) AND #DATE = MASK (1950-2020)

Example 4:

IF #DATE (A4) = MASK (19-20YY)

In this example, the content of field #DATE is checked for a two-digit number in the range 19 to 20 followed by a valid two-digit year (00 through 99). The century is supplied by Natural as described above.

IF #DATE (A10) = MASK (YYYY'-'MM'-'DD) AND #DATE = MASK (19-20)

Checking Against the Content of Constants or Variables

If the value for the mask check is to be taken from either a constant or a variable, this value (operand2) must be specified immediately following the mask-definition.

operand2 must be at least as long as the mask.

In the mask, you indicate each position to be checked with an X, and each position not to be checked with a period (.) or a question mark (?) or an underscore (_).

Example:

DEFINE DATA LOCAL
1 #NAME (A15)
END-DEFINE
...
IF #NAME = MASK (..XX) 'ABCD'
...

In the above example, it is checked whether the field #NAME contains CD in the third and fourth positions. Positions one and two are not checked.

The length of the mask determines how many positions are to be checked. The mask is left-justified against any field or constant used in the mask operation. The format of the field (or constant) on the right side of the expression must be the same as the format of the field on the left side of the expression.

If the field to be checked (operand1) is of format A, any constant used (operand2) must be enclosed in apostrophes. If the field is numeric, the value used must be a numeric constant or the content of a numeric database field or user-defined variable.

In either case, any characters/digits within the value specified whose positions do not match the X indicator within the mask are ignored.

The result of the MASK operation is true when the indicated positions in both values are identical.

Example:

** Example 'LOGICX01': MASK option in logical condition
************************************************************************
DEFINE DATA LOCAL
1 EMPLOY-VIEW VIEW OF EMPLOYEES
  2 CITY
END-DEFINE
*
HISTOGRAM EMPLOY-VIEW CITY
  IF CITY = 
MASK (....XX) '....NN'


    DISPLAY NOTITLE CITY *NUMBER
  END-IF
END-HISTOGRAM
*
END

In the above example, the record will be accepted if the fifth and sixth positions of the field CITY each contain the character N.

Range Checks

When performing range checks, the number of positions verified in the supplied variable is defined by the precision of the value supplied in the mask specification. For example, a mask of (...193...) will verify positions 4 to 6 for a three-digit number in the range 000 to 193.

Additional Examples of Mask Definitions:

• In this example, each character of #NAME is checked for an alphabetical character:

  IF #NAME (A10) = MASK (AAAAAAAAAA)

• In this example, positions 4 to 6 of #NUMBER are checked for a numeric value:

  IF #NUMBER (A6) = MASK (...NNN)

• In this example, positions 4 to 6 of #VALUE are to be checked for the value 123:

  IF #VALUE(A10) = MASK (...'123')

• This example will check if #LICENSE contains a license number which begins with NY- and whose last five characters are identical to the last five positions of #VALUE:

  DEFINE DATA LOCAL
  1 #VALUE(A8)
  1 #LICENSE(A8)
  END-DEFINE
  INPUT 'ENTER KNOWN POSITIONS OF LICENSE PLATE:' #VALUE
  IF #LICENSE = MASK ('NY-'XXXXX) #VALUE

• The following condition would be met by any value which contains NAT and AL no matter which and how many other characters are between NAT and AL (this would include the values NATURAL and NATIONALITY as well as NATAL):

  MASK('NAT'*'AL')

Checking Packed or Unpacked Numeric Data

Legacy applications often have packed or unpacked numeric variables redefined with alphanumeric or binary fields. Such redefinitions are not recommended, because using the packed or unpacked variable in an assignment or computation may lead to errors or unpredictable results. To validate the contents of such a redefined variable before the variable is used, use the N option (see Characters in a Mask) as many as number of digits - 1 times followed by a single Z option.

Examples :

IF #P1 (P1) = MASK (Z)
IF #N4 (N4) = MASK (NNNZ)
IF #P5 (P5) = MASK (NNNNZ)

For further information about checking field contents, see MASK Option Compared with IS Option.

MASK Option Compared with IS Option

This section points out the difference between MASK option and IS option and contains a sample program to illustrate the difference.

The IS option can be used to check whether the content of an alphanumeric or Unicode field can be converted to a specific other format, but it cannot be used to check if the value of an alphanumeric field is in the specified format.

The MASK option can be used to validate the contents of a redefined packed or unpacked numeric variable.

Example Illustrating the Difference:

** Example 'LOGICX09': MASK versus IS option in logical condition       
************************************************************************
DEFINE DATA LOCAL                                                       
1 #A2   (A2)                                                            
1 REDEFINE #A2                                                          
  2 #N2 (N2)                                                            
1 REDEFINE #A2                                                          
  2 #P3 (P3)                                                            
1 #CONV-N2 (N2)                                                         
1 #CONV-P3 (P3)                                                         
END-DEFINE                                                              
*                                                                       
#A2 := '12'                                         
WRITE NOTITLE   'Assignment #A2 := "12" results in:'
PERFORM SUBTEST                                     
#A2 := '-1'                                         
WRITE NOTITLE / 'Assignment #A2 := "-1" results in:'
PERFORM SUBTEST                                     
#N2 :=  12                                          
WRITE NOTITLE / 'Assignment #N2 :=  12  results in:'
PERFORM SUBTEST                                     
#N2 :=  -1                                          
WRITE NOTITLE / 'Assignment #N2 :=  -1  results in:'
PERFORM SUBTEST                                     
#P3 :=  12                                          
WRITE NOTITLE / 'Assignment #P3 :=  12  results in:'
PERFORM SUBTEST                                     
#P3 :=  -1                                          
WRITE NOTITLE / 'Assignment #P3 :=  -1  results in:'
PERFORM SUBTEST                                     
*                                                                                                                                
DEFINE SUBROUTINE SUBTEST                                       
IF #A2 IS (N2) THEN                                             
  #CONV-N2 := VAL(#A2)                                          
  WRITE NOTITLE 12T '#A2 can be converted to' #CONV-N2 '(N2)'   
END-IF                                                          
IF #A2 IS (P3) THEN                                             
  #CONV-P3 := VAL(#A2)                                          
  WRITE NOTITLE 12T '#A2 can be converted to' #CONV-P3 '(P3)'   
END-IF                                                          
IF #N2 = MASK(NZ) THEN                                          
  WRITE NOTITLE 12T '#N2 contains the valid unpacked number' #N2
END-IF                                                          
IF #P3 = MASK(NNZ) THEN                                         
  WRITE NOTITLE 12T '#P3 contains the valid packed number' #P3  
END-IF                                                          
END-SUBROUTINE                                                  
*                                                               
END                                                             

Output of Program LOGICX09:

Assignment #A2 := '12' results in:                   
           #A2 can be converted to  12 (N2)          
           #A2 can be converted to   12 (P3)         
           #N2 contains the valid unpacked number  12
                                                     
Assignment #A2 := '-1' results in:                   
           #A2 can be converted to  -1 (N2)          
           #A2 can be converted to   -1 (P3)         
                                                     
Assignment #N2 :=  12  results in:                   
           #A2 can be converted to  12 (N2)          
           #A2 can be converted to   12 (P3)         
           #N2 contains the valid unpacked number  12
                                                     
Assignment #N2 :=  -1  results in:                   
           #N2 contains the valid unpacked number  -1
                                                     
Assignment #P3 :=  12  results in:                   
           #P3 contains the valid packed number   12 
                                                     
Assignment #P3 :=  -1  results in:                   
           #P3 contains the valid packed number   -1

MODIFIED Option - Check whether Field Content has been Modified

Syntax:

This option is used to determine whether the content of a field has been modified during the execution of an INPUT or PROCESS PAGE statement. As a precondition, a control variable must have been assigned using the parameter CV.

Operand Definition Table:

Attribute control variables referenced in an INPUT or PROCESS PAGE statement are always assigned the status "not modified" when the map is transmitted to the terminal.

Whenever the content of a field referencing an attribute control variable is modified, the attribute control variable has been assigned the status "modified". When multiple fields reference the same attribute control variable, the variable is marked "modified" if any of these fields is modified.

If operand1 is an array, the result will be true if at least one of the array elements has been assigned the status "modified" (OR operation).

Example of MODIFIED Option:

** Example 'LOGICX06': MODIFIED option in logical condition
************************************************************************
DEFINE DATA LOCAL
1 #ATTR (C)
1 #A    (A1)
1 #B    (A1)
END-DEFINE
*
MOVE (AD=I) TO #ATTR
*
INPUT (CV=#ATTR) #A #B
IF #ATTR NOT MODIFIED
  WRITE NOTITLE 'FIELD #A OR #B HAS NOT BEEN MODIFIED'
END-IF
*
IF #ATTR MODIFIED
  WRITE NOTITLE 'FIELD #A OR #B HAS BEEN MODIFIED'
END-IF
*
END

Output of Program LOGICX06:

#A   #B 

After entering any value and pressing ENTER, the following output is displayed:

FIELD #A OR #B HAS BEEN MODIFIED

SCAN Option - Scan for a Value within a Field

Syntax:

Operand Definition Table:

^* operand2 may only be binary if operand1 is of format A or U. If operand1 is of format U and operand2 is of format B, then the length of operand2 must be even.

The SCAN option is used to scan for a specific value within a field.

The characters used in the SCAN option (operand2) may be specified as an alphanumeric or Unicode constant (a character string bounded by apostrophes) or the contents of an alphanumeric or Unicode database field or user-defined variable.

The field to be scanned (operand1) may be of format A, N, P or U. The SCAN operation may be specified with the equal (EQ) or not equal (NE) operators.

The length of the character string for the SCAN operation should be less than the length of the field to be scanned. If the length of the character string specified is identical to the length of the field to be scanned, then an EQUAL operator should be used instead of SCAN.

Example of SCAN Option:

** Example 'LOGICX02': SCAN option in logical condition
************************************************************************
DEFINE DATA
LOCAL
1 EMPLOY-VIEW VIEW OF EMPLOYEES
  2 NAME
*
1 #VALUE   (A4)
1 #COMMENT (A10)
END-DEFINE
*
INPUT 'ENTER SCAN VALUE:' #VALUE
LIMIT 15
*
HISTOGRAM EMPLOY-VIEW FOR NAME
  RESET #COMMENT
  IF NAME = SCAN #VALUE
    MOVE 'MATCH' TO #COMMENT
  END-IF
  DISPLAY NOTITLE NAME *NUMBER #COMMENT
END-HISTOGRAM
*
END

Output of Program LOGICX02:

ENTER SCAN VALUE:  

A scan for example for LL delivers three matches in 15 names:

        NAME          NMBR      #COMMENT
-------------------- --------- ----------
 
ABELLAN                      1 MATCH
ACHIESON                     1 
ADAM                         1
ADKINSON                     8
AECKERLE                     1
AFANASSIEV                   2
AHL                          1
AKROYD                       1
ALEMAN                       1
ALESTIA                      1
ALEXANDER                    5
ALLEGRE                      1 MATCH
ALLSOP                       1 MATCH
ALTINOK                      1
ALVAREZ                      1

SPECIFIED Option - Check whether a Value is Passed for an Optional Parameter

Syntax:

This option is used to check whether an optional parameter in an invoked object (subprogram, external subroutine, dialog or ActiveX control) has received a value from the invoking object or not.

An optional parameter is a field defined with the keyword OPTIONAL in the DEFINE DATA PARAMETER statement of the invoked object. If a field is defined as OPTIONAL, a value can - but need not - be passed from an invoking object to this field.

In the invoking statement, the notation nX is used to indicate parameters for which no values are passed.

If you process an optional parameter which has not received a value, this will cause a runtime error. To avoid such an error, you use the SPECIFIED option in the invoked object to check whether an optional parameter has received a value or not, and then only process it if it has.

parameter-name is the name of the parameter as specified in the DEFINE DATA PARAMETER statement of the invoked object.

For a field not defined as OPTIONAL, the SPECIFIED condition is always TRUE.

Example of SPECIFIED Option:

Calling Programming:

** Example 'LOGICX07': SPECIFIED option in logical condition            
************************************************************************
DEFINE DATA LOCAL                                                       
1 #PARM1 (A3)                                                           
1 #PARM3 (N2)                                                           
END-DEFINE                                                              
*                                                                       
#PARM1 := 'ABC'                                                         
#PARM3 := 20                                                            
*                                                                       
CALLNAT 'LOGICX08' #PARM1 1X #PARM3                                     
*                                                                       
END

Subprogram Called:

** Example 'LOGICX08': SPECIFIED option in logical condition            
************************************************************************
DEFINE DATA PARAMETER                                                   
1 #PARM1 (A3)                                                           
1 #PARM2 (N2) OPTIONAL                                                  
1 #PARM3 (N2) OPTIONAL                                                  
END-DEFINE                                                              
*                                                                       
WRITE '=' #PARM1                                                        
*                                                                       
IF #PARM2 SPECIFIED                                                     
  WRITE '#PARM2 is specified'                                           
  WRITE '=' #PARM2                                                      
ELSE                                                                    
  WRITE '#PARM2 is not specified'                                       
* WRITE '=' #PARM2                /* would cause runtime error NAT1322  
END-IF                                                                  
*                                                                       
IF #PARM3 NOT SPECIFIED
  WRITE '#PARM3 is not specified'
ELSE                             
  WRITE '#PARM3 is specified'    
  WRITE '=' #PARM3               
END-IF                           
END

Output of Program LOGICX07:

Page      1                                                  14-01-14  11:25:41
                                                                               
#PARM1: ABC                                                                    
#PARM2 is not specified                                                        
#PARM3 is specified                                                            
#PARM3:  20