This document contains special considerations that refer to Natural in batch mode under the operating system BS2000.
The section covers the following topics:
See also Natural under BS2000 Batch Mode Error Messages.
For considerations that refer to Natural in batch mode generally, see:
The following optional sequential files or system files are used during a Natural under BS2000 batch mode session:
| Link Name | System File | Explanation |
|---|---|---|
CMPRMIN |
Dynamic Parameter Data Set | |
SYSIPT |
Dynamic Parameter Input | |
SYSDTA |
Dynamic Parameter Input | |
SYSDTA |
Primary Input and Input for Natural
INPUT
Statements
|
|
SYSLST |
Primary Report Output | |
SYSOUT |
Primary Report Output | |
SYSLSTnn |
Optional Report Output for Natural Tracing or
Additional Reports, nn is the report
number
|
|
Pnn |
Additional Reports,
nn is the report number
|
|
Wnn |
Natural Work Files,
nn is the work file number
|
CMPRMIN can be used as dynamic parameter file if the
system files SYSIPT or SYSDTA shall not be used or
are not available to Natural. The parameter file must be of FCBTYPE SAM.
All input records from CMPRMIN are concatenated into one
parameter string. Trailing blanks at the end of each record are truncated; no
commas are inserted.
For further information on reading dynamic parameters, see the keyword
parameter DYNPAR
for macro NAMBS2 (see DYNPAR=FILE).
The system file SYSIPT can be used as dynamic parameter
file.
All input records from SYSIPT are concatenated into one
parameter string. Only the first 72 positions of each SYSIPT
record are significant. Trailing blanks at the end of each record are
truncated; no commas are inserted.
For further information on reading dynamic parameters, see the keyword
parameter DYNPAR
for macro NAMBS2.
The system file SYSDTA can be used as dynamic parameter
file.
All input records from SYSDTA are concatenated into one
parameter string. Trailing blanks at the end of each record are truncated; no
commas are inserted.
Anmerkung:
If SYSDTA is assigned to SYSCMD, the
parameter input has to be closed off by an /EOF
command to separate it from succeeding primary input data.
For further information on reading dynamic parameters, see the keyword
parameter DYNPAR
for macro NAMBS2 (see DYNPAR=FILE).
The system file SYSDTA is used as the primary input file
that contains Natural commands, Natural source programs, and (optionally) data
to be read by INPUT
statements during the execution of Natural programs.
The number of characters actually processed per line is determined by
the current setting of the profile/session parameter
SL. This
setting applies for both source statement and execution time input data. This
enables identification or sequence numbers to be placed in the rightmost
columns of every record, if desired.
The system files SYSOUT or SYSLST are used
for the primary output report, resulting from DISPLAY,
PRINT and
WRITE statements in a
Natural program.
The actually used system file depends on the value for the keyword
parameter WRITE in
the assembly of the reentrant part of the Natural batch driver.
The system files SYSOUT or SYLST are also
used as optional report output for dynamic parameters. If the profile parameter
PLOG is set
to ON, all dynamic profile parameters are written to the same
destination as the primary report output.
If profile parameter ETRACE is set to
ON, all trace output is written to this file during the
session.
Depending on the value for the keyword parameter
TRACE in the
assembly of the reentrant part of the Natural batch driver, one of the
alternate SYSLST system files SYLST01 -
SYSLST99 is used as destination for the trace records.
Pnn is used for each additional
report referenced by any Natural program compiled or executed during the
session. nn must be a two-digit decimal
number in the range 01-31, corresponding to the report number used in a
DISPLAY,
PRINT and
WRITE statement.
Instead of Pnn, any other link
names may be used by setting the keyword subparameter
DEST of profile parameter PRINT
to an appropriate value, for example:
PRINT=((nn),...,DEST=PRNTnn)
Wnn is used for each Natural
work file referenced by any Natural program compiled or executed during the
session. nn must be a two-digit decimal
number in the range 01 - 32, corresponding to the number used in a
READ WORK FILE or
WRITE WORK FILE
statement.
Instead of Wnn, any other link
names may be used by setting the subparameter
DEST of
profile parameter WORK to an
appropriate value, for example:
WORK=((nn),...,DEST=WRKnn)
The Natural BS2000 batch mode driver is generated by assembling the
macro NAMBS2. For the control of conditional assembly of the
driver modules, the following keyword parameters are available:
ADACOM |
ADDBUFF |
APPLNAM |
CODE |
DELETE |
DYNPAR |
ILCS |
JV |
LF |
LINK |
LINK2/LINK3/LINK4
| NUCNAME |
PARMOD |
REQMLOC |
SYSDTA |
TERM |
TIMESTMP |
TRACE |
USERID |
WRITE
This parameter applies to the generation of the environment-dependent nucleus. It determines which Adabas link module is to be used.
Possible values:
ADACOM=ADAUSER |
The module ADAUSER is linked to the
environment-dependent nucleus.
|
ADACOM=ADABAS |
The module ADAUSER is linked to the
environment-dependent nucleus.
|
ADACOM=ADALNK |
The module ADALNK is linked to the
environment-dependent nucleus or the modules ADALNK and
SSFB2C are linked to the environment-dependent nucleus.
This is the default. |
In any case a resolve to the Adabas module library has to be given in the linkage step for the environment-dependent nucleus.
This parameter applies to the generation of the non-reentrant part.
It determines the additional number of pages for the terminal I/O buffer.
Possible values:
ADDBUFF=n |
n
specifies the number of pages in 4 KB units. Range of values: 1 to 8.
|
| There is no default. |
This parameter applies to the generation of the non-reentrant part.
Possible values:
APPLNAM=name
|
name is the name
(maximum 8 characters) of the Natural batch application. This name is part of
the serialization ID when the Natural batch task is initialized.
|
APPLNAM=NATBS2
|
This is the default. |
This parameter applies to the generation of both the non-reentrant part and the reentrant part.
It determines which part of the Natural BS2000 interface is to be generated.
Possible values:
CODE=FRONT |
Indicates the generation/assembly of the non-reentrant part.
This is the default. |
CODE=RENT |
Indicates the generation/assembly of the reentrant part. |
This parameter applies to the generation of the reentrant part.
Possible values:
DELETE=ON |
The setting of the profile parameter
DELETE in
the Natural parameter module module
determines whether dynamically loaded non-Natural programs are unloaded at the
end of the Natural program in which they are loaded or whether they are
unloaded when command mode is entered.
This is the default. |
DELETE=OFF |
A dynamically loaded non-Natural program once loaded is kept for the duration of the whole Natural session. |
This parameter applies to the generation of the non-reentrant part.
Possible values:
DYNPAR=NO |
No dynamic parameters are read.
This is the default. |
DYNPAR=SYSDTA
|
The dynamic parameters are read from SYSDTA. If
SYSDTA is assigned to SYSCMD, at least an
/EOF card must follow the /EXEC Natural card.
|
Example:
/LOGON /SYSFILE SYSDTA=(SYSCMD) /EXEC NATBAT /EOF * Null dynamic parameters LOGON SYSEXTP L * * FIN /LOGOFF |
|
DYNPAR=SYSIPT
|
The dynamic parameters are read from
SYSIPT.
|
DYNPAR=FILE
|
The dynamic parameters are read from a sequential file. The
input of this SAM file is interpreted as one single text string, which means
that the individual entries must be separated from each other by a comma, even
at the end of a line. Such a parameter file must be defined with a
FILE command by using the LINK
parameter CMPRMIN.
|
Example:
/FILE NAT.PARAMS,LINK=CMPRMIN |
This parameter applies to the generation of the reentrant part.
Possible values:
ILCS=CRTE |
3GL subprograms are invoked with common runtime environment
convention. For this to be possible, the ILCS initialization
routine IT0SL# must be linked to the Natural
environment-dependent
nucleus (see the Installation documentation):
INCLUDE IT0SL#,SYSLNK.CRTE.010 RESOLVE,SYSLNK.CRTE.010 |
ILCS=YES |
3GL subprograms are invoked with enhanced ILCS
linkage convention. For this to be possible, the ILCS
initialization routine IT0INITS must be linked to the Natural
environment-dependent
nucleus (see the Installation documentation):
INCLUDE IT0INITS,SYSLNK.ILCS RESOLVE,SYSLNK.ILCS |
ILCS=NO |
Standard processing applies.
This is the default. |
This parameter applies to the generation of the non-reentrant part.
Possible values:
JV=ON
|
The condition code created when the Natural session is
terminated is passed to a job variable if one has been declared with the link
name *NATB2JV.
|
JV=OFF |
If your BS2000 installation does not include the BS2000 Job
Variables subsystem, this parameter must be set to OFF; otherwise
assembly errors in the NAMBS2 compilation occur.
This is the default. |
This parameter applies to the generation of the non-reentrant part.
With this parameter, you specify the control character to be used for line advance when printing on the local printer.
Possible values:
LF=X'zz' |
zz: line advance control character in hexadecimal format. |
LF=X'25'
|
This is the default. |
This parameter applies to the generation of the non-reentrant part.
Possible values:
|
|
The
name(s) of programs and modules that
are called from Natural programs and linked with the non-reentrant part must be
specified with this parameter. Conversely, the programs and modules whose names
are specified must be linked with the non-reentrant part, otherwise the
application is put into status SYSTEMERROR and all users are
rejected with an error message.
|
| There is no default. |
A "TABLE" macro call is performed for the specified programs and modules, which enters their load addresses into the dynamic loader's link table. It is therefore not necessary to dynamically load these programs when they are called by Natural programs. For dynamically loaded programs, only the load library needs to be defined in the Natural parameter module.
Example:
LINK=PROG1 LINK=(PROG1,PROG2,MODUL111)
These parameters apply to the generation of the non-reentrant part.
The parameters LINK2,
LINK3 and LINK4 are an extension
of the LINK parameter. Since an operand definition
cannot be longer than 127 characters (including parentheses), these parameters
are provided for cases where the operand of parameter
LINK would be too long.
Possible values:
|
|
n: 2, 3 or 4. The rest
of the parameter syntax is analogous to that of LINK.
|
| There is no default. |
Examples:
NAMBS2 LINK=(PROG1,PROG2,...), LINK2=(PROG54,...) NAMBS2 LINK=(PROG1,PROG2,PROG3,PROG4)
This parameter applies to the generation of the non-reentrant part.
With this parameter, you specify the name of the bounded, reentrant
Natural module. You must use this name for the Natural pool and load
information in macro ADDON (macro ADDON assembles
BS2STUB).
Possible values:
NUCNAME=name
|
name is the name of the bounded, reentrant Natural module |
NUCNAME=NB2RENT
|
This is the default. |
This parameter applies to the generation of both the non-reentrant part and the reentrant part.
Possible values:
PARMOD=(nn,loc) |
|
PARMOD=(31,ABOVE)
|
This is the default. |
The first part of this parameter (nn) is used to define an addressing mode (24-bit or 31-bit mode) for the Natural BS2000 application.
31-bit mode is required if the Natural buffer pool, the reentrant part of the Natural BS2000 application, Adabas or the Adabas Fast Path pool is located above 16 MB.
The second part of this parameter (loc) is used to define the location of the Natural environment-dependent nucleus (see the Installation documentation). If you load the environment-dependent nucleus, this must be defined in the environment-dependent nucleus link procedure as follows:
LOADPT=*XS
or
LOADPT=X'address'
Example:
/EXEC TSOLINK PROG NATvrs,FILENAM=NATvrs,LOADPT=*XS,... TRAITS RMODE=ANY,AMODE=31 INCLUDE.... /* PARMOD=(nn,loc) MUST BE IDENTICAL IN THE NON-REENTRANT AND REENTRANT PARTS
vrs represents the relevant
product version (see also Version in
the Glossary).
This parameter applies to the generation of both the non-reentrant part
and reentrant part in 31-bit mode (PARMOD=31).
This parameter determines where the requested Natural work areas are to be allocated by the system using request memory.
Possible values:
REQMLOC=BELOW |
All areas are requested below 16 MB. |
REQMLOC=ABOVE
|
All areas are requested above 16 MB. |
REQMLOC=RES
|
All areas are requested depending on the location of the
reentrant part.
This is the default. |
The REQMLOC parameter corresponds to the
LOC parameter of the BS2000 system macro
REQM.
This parameter applies for the generation of the non-reentrant part.
Possible values:
SYSDTA=PRIMARY |
After reading of dynamic parameters from SYSDTA,
SYSDTA is set to SYSFILE SYSDTA=(PRIMARY).
This is the default. |
SYSDTA=SYSCMD |
After reading of dynamic parameters from SYSDTA,
SYSDTA is set to SYSFILE SYSDTA=(SYSCMD).
|
This parameter applies to the generation of the non-reentrant part.
Possible values:
TERM=PRGR |
The Natural batch application will be terminated.
This is the default. |
TERM=STEP |
The system additionally executes the next
SET-JOB-STEP command.
|
This parameter applies to the generation of the non-reentrant part.
It determines the time base for all system variables and time stamps derived from the machine time.
Possible values:
TIMESTMP=UTC |
Time base is UTC (former GMT).
This is the default. |
TIMESTMP=LOCAL |
Time base is the local machine time |
This parameter applies to the generation of the reentrant part.
With this parameter, you specify the number of a trace file and the maximum length of a trace print record.
Possible values:
TRACE=nn,ll
|
nn is
the number for the SYSLSTnn trace file
in the range of 01 to 99.
|
TRACE=99,71 |
This is the default. |
If any external Natural trace function is active, the trace records
will be written to SYSLSTnn. In this
case, the Natural batch mode driver creates the following trace file:
Example:
NATURAL.TRACE.BTCH.TTTT,SPACE=(30,3) SYSFILE SYSLSTnn=Natural.TRACE.BTCH.TTTT /* TTTT is the task sequence number
Before the Natural batch mode session is terminated, the trace file will be closed as follows:
SYSFILE SYSLSTnn=(PRIMARY)
This parameter applies to the generation of the non-reentrant part.
Possible values:
|
|
The Natural user ID is created by using the BS2000 user ID. |
|
|
The Natural user ID is created by using the job name; that is,
the /.JOBNAME of the LOGON command. If
no BS2000 job name has been specified with the LOGON
command, the Natural user ID is created as with USERID=SYSTEM or
YES.
|
USERID=USER |
This is the default. |
This parameter applies to the generation of both the non-reentrant and the reentrant part.
This parameter defines the destination of the output produced by Natural.
Possible values:
WRITE=SYSOUT |
Natural output is written to
SYSOUT.
|
WRITE=SYSLST |
Natural output is written to
SYSLST.
This is the default value. |
The Natural batch mode driver uses the BS2000 facility "Job
Variables" to pass return codes to the user or to subsequent jobs
(steps). The return codes are created either by Natural itself (in the range 1
to 31) or by the Natural application if a TERMINATE statement is
used with the condition-code option (the range to be used is 32 to 256).
The job variable which is to contain the return code has to be declared
using the link name *NATB2JV. The support of job variables depends
on the setting of the SET parameter &JV
in the Natural BS2000 batch mode driver NATBS2.
Example:
/LOGON /DCLJV NATBJV,LINK=*NATB2JV /EXEC NATnnnB *TERMCC /LOGOFF
To assign Return Code 36 to NATBJV, the Natural program
TERMCC could be coded as follows:
ASSIGN CC(N8) = 36 TERMINATE CC END