This document describes the print file/work file server
NATPWSV2 for the RPC batch server environment under BS2000/OSD
that is started via the RPC Server
Front-End.
This section covers the following topics:
See also Print File/Work File Server NATPWSV2 Error Messages in the Messages and Codes documentation.
The print file/work file server NATPWSV2 communicates with
the RPC batch server NATFSTB2 by using the forward eventing
method.
To setup the print file/work file server, perform the following steps:
Link the module NATFSTB2 to the Natural nucleus. The
module NATFSTB2 replaces the program
NATWKFB2.
The module NATPWSV2 must be linked, together with an
ADDON parameter definition, for the common memory pool
with the new pool type PWK (print file/work file control pool) in
the program BS2STUB. This common memory pool must be set up using
a defined fixed address, for example:
PWKSTUB BS2STUB PARMOD=31,PROGMOD=ANY,UNRES=*DBLOPT
ADDON NAME=PWK#POOL, NAME OF CONTROL POOL -
TYPE=PWK, TYPE OF CONTROL POOL -
SIZE=1MB, POOL SIZE IN MB -
STAT=LOCAL, POOL STATUS IS LOCAL -
SCOP=GLOBAL, SCOPE IS GLOBAL -
POSI=ABOVE, POOL POSITION IS ABOVE -
ADDR=19, ADDRESS IS X'1300000' -
PFIX=YES, POOL ADDRESS IS FIXED -
ACCS=WRITE NO POOL PROTECTION
ADDEND
The same ADDON parameter definition (except for
ADDR=) must be contained in the program BS2STUB which
is linked to the front-end part of the RPC batch server.
Example of linking the print file/work file server:
/START-PROGRAM $BINDER
START-LLM-CREATION INTERNAL-NAME=PWKSRV, -
SLICE-DEFINITION=*BY-ATTRIBUTES(RESIDENCY-MODE=*YES)
INCLUDE-MODULES NATPWSV,LIB=(NATvrs.MOD)
INCLUDE-MODULES PWKSTUB,LIB=(user-lib)
MODIFY-SYMBOL-ATTRIBUTES ADD-MODE=*31,RES-MODE=*ANY,READ-ONLY=*NO
MODIFY-SYMBOL-VISIBILITY -
SYMBOL-NAME = *ALL, -
SYMBOL-TYPE = *DEFINITIONS, -
VISIBLE = *NO(KEEP-RESOLUTION=*YES)
SAVE-LLM LIB=NATURAL.USER.MOD,ELEMENT=E.NATPWSV2,LOAD-ADDR=X'10000000'
END
where:
vrs |
is the relevant product version of Natural for Mainframes and |
user-lib |
is the user library. |
Data exchange between the print file/work file server and the RPC batch
server takes place in the print file/work file control pool
(TYPE=PWK).
The print file/work file server has to be started before the RPC batch server.
The RPC batch server expects the presence of an initialized print file/work file control pool. This initialization occurs when the print file/work file server is started.
A Natural RPC batch server communicates with exactly one print file/work file server and vice versa (TSN1 <=> TSN2).
All print files and work files (link names P01 to P32
and W01 to W32) to be used have to be defined by a
FILE command in the print file/work file server's
job control.
Example of a start job:
/.PWKSRV LOGON /ER LST.PWKSERVER. /STEP /OPTION DUMP=YES /FILE WORK.W01,LINK=W01 /FILE WORK.W02,LINK=W02 . . /FILE PRINT.P01,LINK=P01 /FILE PRINT.P02,LINK=P02 . . /EXEC (NATPWSV2,NATURAL.NATvrs.MOD) /LOGOFF N
where vrs represents the relevant product version.
The print file/work file server can be terminated by way of
P1 eventing, using the program CMPEND. The event name
for terminating the print file/work file server is the name of the print
file/work file control pool.
Example of a print file/work file server termination procedure:
/BEGIN-PROCEDURE LOGGING COMMANDS /ASSIGN-SYSDTA TO=*SYSCMD /SET-JOB-STEP /START-PROGRAM FROM-FILE=*MODULE(LIBRARY=NATURAL.NATvrs.MOD,- / ELEMENT=CMPEND) PWK#POOL <== name of the print file/work file control pool /SET-JOB-STEP /ASSIGN-SYSDTA TO=*PRIMARY /EXIT-PROCEDURE
where vrs represents the relevant product version.
All error messages (abnormal termination of the print file/work file
server) are written to SYSLST99 into the file
LST.PWKSERVER.tsnn.