Natural System Error Messages 3951-4000

NAT3951: CSECT :1: is missing.

Text
CSECT ... is missing.
Explanation
This error may be caused by one of the following:

- The module indicated in the message is missing in the link-edit
  stream.
- The CSECT instruction is missing in the source of the module.

- The module name in the CSECT instruction has been changed.
Action
Make sure that the module is included in the link-edit stream;
make sure that the source of the module is complete/correct.

NAT3952: INIT call failed with status code :1:.

Text
INIT call failed with status code ....
Explanation
The Natural DL/I initialization routine issues an INIT call to
inform IMS TM that it is prepared to accept status codes 'BA' and 'BB'
regarding the unavailability of data.
This call failed, and DL/I has returned the status code indicated
in the message.
Action
Refer to the respective IBM documentation for a detailed explanation
of the status code.

NAT3953: Versions of NDLNUC and :1: do not match.

Text
Versions of NDLNUC and ... do not match.
Explanation
The modules included in the Natural DL/I link-edit must be
of the same version.

Module name: NDLSINIT
Action
Check NDLNUC, NDLSIO00 and NDLPARM.

NAT3954: DLISIZE must be greater than :1:.

Text
DLISIZE must be greater than ....
Explanation
If DLISIZE is not '0', it must be large enough to hold all buffers
that are required by Natural for DL/I.
Action
Set DLISIZE to the value indicated in the error message.

NAT3955: Error :1: in GETMAIN in Natural for DL/I buffer.

Text
Error ... in GETMAIN in Natural for DL/I buffer.
Explanation
An error occurred when Natural for DL/I attempted to acquire
its buffer from the thread.
Action
Increase the size of the thread.

NAT3956: Error :1: in GETMAIN in Natural for DL/I subpool :2:.

Text
Error ... in GETMAIN in Natural for DL/I subpool ....
Explanation
An error occurred when Natural for DL/I attempted to acquire
the subpool (as indicated in the error message) from its buffer.
Action
Contact Software AG support.

NAT3957: No DBID marked as DL/I in NTDB macro.

Text
No DBID marked as DL/I in NTDB macro.
Explanation
Natural for DL/I has been invoked, but in the NTDB macro
no database has been reserved for DL/I.
Action
If you do not wish to invoke Natural for DL/I, invoke Natural
with DLISIZE=0; otherwise correct error in NTDB macro.

NAT3959: XRST call failed with DL/I status code :1:.

Text
XRST call failed with DL/I status code ....
Explanation
When starting a BMP, the Natural DL/I initialization routine issues
an extended restart (XRST) call.
This call failed, and DL/I returned the status code indicated in the
message.
Action
Refer to the respective IBM documentation for a detailed explanation
of the status code.

NAT3960: No valid PSB name was provided.

Text
No valid PSB name was provided.
Explanation
The address pointing to the PCB address list is blank or zero.
This happens if a DLISIZE other than zero has been specified and
1) Natural is not running under the control of the DL/I region
   controller (DFSRRC00 for z/OS, DLZRRC00 for z/VSE); or
2) Natural is running under control of the DL/I region controller,
   but, due to an internal error, the PCB address list has not been
   passed to Natural for DL/I; or
3) the PSB name in the JCL does not match the PSB name on CMSYNIN.


Module name: NDLSINIT.

Problem determination: Check the JCL used to start Natural.
Action
For 1: Run Natural under the control of the DL/I region controller,
or run Natural with DLISIZE=0. For 2: Contact Software AG support.
For 3: Correct the PSB name in the JCL or in CMSYNIN.

NAT3961: NSB :1: not found on FDIC system file.

Text
NSB ... not found on FDIC system file.
Explanation
The PSB which is used to start Natural has not been defined on
the FDIC system file or could not be read (due to an unexpected
return code from the database).
Module name: NDLSINIT.

Problem determination: Check if the correct system file has been
assigned.
Action
Specify correct FDIC, or run NATPSB procedure to store the NSB on the
FDIC system file. Set DLISIZE=0 if you do not want an NSB associated
with the transaction (because it does not need to access DL/I).

NAT3962: Error in loading global area.

Text
Error in loading global area.
Explanation
The NDPSGLBA module is not included the link step; therefore it
cannot be loaded dynamically.







Module name: NDPSGLBA

Problem determination: Obtain a link-edit listing.
Action
Either include NDPSGLBA in the link step (batch and CICS) or
specify it in the STEPLIB DD card (IMS TM).

NAT3963: Natural for DL/I initialization failed.

Text
Natural for DL/I initialization failed.
Explanation
The reason for this failure is explained by the more detailed
error message issued together with this error message.
Action
See explanation of detailed message.

NAT3970: Error when loading NDB/NSB.

Text
Error when loading NDB/NSB.
Explanation
The NDB, or the NSB, could not be loaded from the load library
(under z/VSE, from the core image library).







Module names: NDLBINDB, NDLBINSB.

Problem determination: Item 11 or Item 12.
Action
1. Check whether the load (core) library contains the NDB/NSB.
2. Check the results of the assembly and link steps of the
   NATDBD/NATPSB procedures which produce the above modules.

NAT3971: Error in END TRANSACTION command.

Text
Error in END TRANSACTION command.
Explanation
Due to an error when issuing the 'ET' command, the NDB (or the NSB)
could not be stored into the Natural system file.
The message 'SYSDLI: 1004' contains the I/O response code received
from the Natural I/O processor.

The I/O codes are described in the Adabas or Natural documentation
respectively.


Module names: NDPBNDB1, NDPBNSB1.

Problem determination: Item 11 or Item 12.
Action
Contact your database administrator.

NAT3972: DBD has too many (over 468) DL/I fields.

Text
DBD has too many (over 468) DL/I fields.
Explanation
A DBD with more than 468 (13 * (26 + 10)) DL/I fields cannot
be processed. This is a design restriction.







Module name: NDPBSESH

Problem determination: Items 4, 11.
Action
Reduce the number of DL/I fields.

NAT3973: Error in acquiring a work area (storing NDB/NSB).

Text
Error in acquiring a work area (storing NDB/NSB).
Explanation
An error message was returned by the GETMAIN/GETVIS macro after
Natural DL/I attempted to acquire a work area while processing
a logical DBD.






Module name: NDPBNDB1

Problem determination: Item 11.
Action
Increase the partition/region size.

NAT3974: Error when storing the NDB/NSB.

Text
Error when storing the NDB/NSB.
Explanation
During the STORE operation of an NDB/NSB, an error message
was returned either by the Adabas 'N1' command or by a VSAM 'PUT'.
The error message 'SYSDLI: 1103' contains the I/O response code
received from the Natural I/O processor.

The I/O codes are described in the Adabas or Natural documentation
respectively.


Module names: NDLBSNDB, NDLBSNSB.

Problem determination: Item 11.
Action
Correct the condition that caused the I/O error.

NAT3975: DBD/PSB name does not match the load module name.

Text
DBD/PSB name does not match the load module name.
Explanation
The NAME parameter in the DBD/PSB macro does not match the load
module name in the load (in z/VSE, core) library which contains
the output of the assembly and link steps of the NATDBD/NATPSB
procedure.





Module names: NDLBINDB, NDLBINSB.

Problem determination: Items 4/5, 11/12.
Action
Check the name of the load module containing the output of the assembly
step of the NATDBD/NATPSB procedure; change it accordingly to match
the NAME parameter. Ensure that SAG macros are used during the assembly.

NAT3978: NDB not found.

Text
NDB not found.
Explanation
Internal error.








Module name: NDPBRNDB

Problem determination: Items 1 (trace parameter = (CMD,REQ,SER)), 11.
Action
Contact Software AG support.

NAT3979: Error in acquiring a work area.

Text
Error in acquiring a work area.
Explanation
An error message was received from the GETMAIN/GETVIS macro
while acquiring the I/O area into which the first slot of the
old copy of the NDB being processed was to be read.






Module name: NDPBRNDB

Problem determination: Item 11.
Action
Increase the partition/region size.

NAT3980: Error in acquiring a work area.

Text
Error in acquiring a work area.
Explanation
An error message was received from the GETMAIN/GETVIS macro
while acquiring the I/O area into which the old copy of the
NDB being processed was to be read.






Module name: NDPBRNDB

Problem determination: Item 11 or item 12.
Action
Increase the partition/region size.

NAT3981: Error in reading an NDB.

Text
Error in reading an NDB.
Explanation
The new NDB copy could not be stored on the Natural system
file due to an error which occurred while reading the old copy.
The error message 'SYSDLI: 1004' contains the I/O response
code received from the Natural I/O processor.

The I/O codes are described in the Adabas or Natural documentation
respectively.


Module name: NDPBRNDB

Problem determination: Item 11.
Action
Correct the condition that caused the I/O error.

NAT3982: Error in reading an NDB.

Text
Error in reading an NDB.
Explanation
The new NDB copy could not be stored on the Natural system
file due to an error which occurred while reading the old copy.
The error message 'SYSDLI: 1004' contains the I/O response
code received from the Natural I/O processor.

The I/O codes are described in the Adabas or Natural documentation
respectively.


Module name: NDPBRNDB

Problem determination: Item 11.
Action
Correct the condition that caused the I/O error.

NAT3983: Error in reading an NDB.

Text
Error in reading an NDB.
Explanation
An error occurred while the old copy of an existing NDB
(or NSB) was being read for update. The error message
'SYSDLI: 1004' contains the I/O response code received
from the Natural I/O processor.

The I/O codes are described in the Adabas or Natural documentation
respectively.


Module names: NDPBDNDB, NDPBDNSB.

Problem determination: Item 11 or item 12.
Action
Correct the condition that caused the I/O error.

NAT3984: Error in reading an NDB.

Text
Error in reading an NDB.
Explanation
An error occurred while the old copy of an existing NDB
(or NSB) was being read for update. The error message
'SYSDLI: 1004' contains the I/O response code received
from the Natural I/O processor.

The I/O codes are described in the Adabas or Natural documentation
respectively.


Module names: NDPBDNDB, NDPBDNSB.

Problem determination: Item 11 or item 12.
Action
Correct the condition that caused the I/O error.

NAT3985: Error in deleting an NDB.

Text
Error in deleting an NDB.
Explanation
An error occurred while the old copy of an NDB was being
deleted. The error message 'SYSDLI: 1004' contains the
I/O response code received from the Natural I/O processor.

The I/O codes are described in the Adabas or Natural documentation
respectively.



Module name: NDPBDNDB

Problem determination: Item 11.
Action
Correct the condition that caused the I/O error.

NAT3986: NDB/NSB not found.

Text
NDB/NSB not found.
Explanation
This error occurs when an NDB (or NSB) is being read for update
before being deleted. The error is originated by the 'L3' command
(Adabas system file) or by the VSAM GET (VSAM system file).
The error message 'SYSDLI: 1004' contains the I/O response code
received from the Natural I/O processor.

The I/O codes are described in the Adabas or Natural documentation
respectively.

Module names: NDPBDNDB, NDPBDNSB.

Problem determination: Item 11 or item 12.
Action
Correct the condition that caused the I/O error.

NAT3987: Error in building a logical NDB.

Text
Error in building a logical NDB.
Explanation
The work area used for building a logical NDB is too small.








Module name: NDPBNDBL

Problem determination: Item 11.
Action
Contact Software AG support.
Software AG will change YLOG in NDPBNDB1 and relink NDLB0001.

NAT3988: Sequence-field error in building a logical NDB.

Text
Sequence-field error in building a logical NDB.
Explanation
More than one sequence field was found for a segment which
is NOT a logical virtual child.

Up to five sequence fields may be defined ONLY for logical
virtual child segments.




Module name: NDPBNDBL

Problem determination: Items 4, 11.
Action
Ensure that the DBDGEN procedure was successfully executed
for this DBD, as this error should be detected by DBDGEN.

NAT3989: Error in building AIX links in a logical NDB.

Text
Error in building AIX links in a logical NDB.
Explanation
Internal error.








Module name: NDPBNDBL

Problem determination: Items 4, 11.
Action
Contact Software AG support.

NAT3990: Error in acquiring a work area for a logical NDB.

Text
Error in acquiring a work area for a logical NDB.
Explanation
A GETMAIN/GETVIS macro was invoked to acquire a work area where a
logical NDB was to be built. A non-zero response code was returned.







Module name: NDPBNDB1

Problem determination: Item 11.
Action
Increase the partition/region size.

NAT3991: Segment referred to as source was not found.

Text
Segment referred to as source was not found.
Explanation
While processing a segment with a SOURCE parameter, the
specified segment was not found in the NDB corresponding to
the DBD specified in the SOURCE keyword.






Module name: NDPBNDBL

Problem determination: Item 11.
Action
Ensure that the ACBGEN procedure was successfully executed
for this DBD, as this error should be detected by ACBGEN.

NAT3992: Error in acquiring a work area for a logical NDB.

Text
Error in acquiring a work area for a logical NDB.
Explanation
A GETMAIN/GETVIS macro was invoked to acquire a work area where a
logical NDB was to be built. A non-zero response code was returned.







Module name: NDPBNDB1

Problem determination: Item 11.
Action
Increase the partition/region size.

NAT3993: NDB not found in Natural system file.

Text
NDB not found in Natural system file.
Explanation
While processing a segment with a SOURCE parameter, the NDB
corresponding to the DBD specified in the SOURCE keyword was
not found in the Natural system file.






Module name: NDPBNDBL

Problem determination: Item 11.
Action
Ensure that the DBDGEN procedure was successfully executed
for this DBD, as this error should be detected by DBDGEN.

NAT3994: Inhibit flag of segment in 'SOURCE' keyword set to 'ON'.

Text
Inhibit flag of segment in 'SOURCE' keyword set to 'ON'.
Explanation
The procedure NATDBD is executed for a logical DBD. This
DBD contains a SOURCE=((segname,,dbname)) statement to
identify segment type 'segname' in physical database 'dbname'.
However, the NDB corresponding to 'dbname' contains one or more
segment types which are marked as inhibited. These segment types
were inhibited by Natural during the execution of NATDBD against
'dbname' because not all references to the real logical child
segment type could be resolved.

Module name: NDPBNDBL

Problem determination: Item 11.
Action
Before executing NATDBD for a logical DBD, execute NATDBD for all
physical DBDs referred to. If the logical relationship is the result of
a recursive structure, run NATDBD for the physical DBD at least twice.

NAT3995: Overflow of source error table.

Text
Overflow of source error table.
Explanation
The table which contains the list of segments with an error flag
is too small.







Module name: NDPBNDBL

Problem determination: Item 4.
Action
Contact Software AG support.

NAT3996: Physical NDB referenced as source was not found.

Text
Physical NDB referenced as source was not found.
Explanation
While processing a segment with a SOURCE parameter, the NDB
corresponding to the DBD specified in the SOURCE keyword was not found
in the Natural system file. (The NDB has been stored in the Natural
system file with some segments having the inhibit flag set to 'ON'.)





Module name: NDPBNDBL

Problem determination: Item 4.
Action
Re-execute the NATDBD procedure.
For details, see the section on logical databases in the Natural DL/I
documentation.

NAT3997: Error when scanning NSB (CMPAT=YES).

Text
Error when scanning NSB (CMPAT=YES).
Explanation








Module name:  NDPBNSB1
Action
Check the PSB definition.

NAT3998: Natural nucleus not found.

Text
Natural nucleus not found.
Explanation
When running NDL batch under z/VSE, NDLSINID tries to load
the Natural phase whose name has been specified in the JCL.
This phase was not found.
Module name: NDLSINID
Action
Check the name of the Natural phase in the JCL.

NAT3999: Not enough memory to load Natural nucleus.

Text
Not enough memory to load Natural nucleus.
Explanation
When running NDL batch under z/VSE, NDLSINID tries to load the
Natural phase whose name has been specified in the JCL.
This phase could not be loaded, because there was not enough memory
available.

Module name: NDLSINID
Action
Check the size of the Natural batch phase, and specify the SIZE
parameter in the JCL accordingly.

NAT4000: Natural error text 4nnn cannot be displayed.

Text
Natural error text 4nnn cannot be displayed.
Explanation
For error NAT4nnn, there is no specific error message available.