Version 6.3.8 for Windows
 —  Parameter Reference  —

AD - Attribute Definition

With this session parameter, you specify field attributes at field/element or statement level.

Related session parameter: CD - Color Definition

Possible settings see below You can specify multiple attributes in any sequence.
Default setting see below  
Applicable statements: FORMAT  

DISPLAY
INPUT
NEWPAGE WITH TITLE
PRINT
REINPUT
WRITE
WRITE TITLE
WRITE TRAILER

Parameter may be specified at statement level and/or at element level.

ASSIGN
CALLNAT
CALLDBPROC
COMPUTE
MOVE
OPEN DIALOG
PERFORM
SEND EVENT
SEND METHOD

Parameter may be specified at element level, however, only the attributes specified in the relevant statement description can be used.
Applicable command: none

Note:
The AD parameter may be also specified in function calls, however, only the attributes specified in the section Function Call can be used.

The following topics are covered below:


AD Parameter Syntax

AD=[field-representation] [field-alignment] [field-i/o-characteristics] [interpretation-of-alphanumeric-fields] [mandatory-input] [input-value-length] [field-upper/lower-case] [filler-character]

You can specify multiple attributes in any sequence. Possible values are:

AD=

B
C
D
I
N
U
V
Y

 

L
R
Z

 

A
M
O
P

 

E
F

 

G
H

 

T
W

 

'c'

The meaning of the attributes and the possible values are explained below.

Examples:

DISPLAY #FIELDA (AD=R) 
INPUT #FIELDB (AD=M) 
INPUT (AD=IM) #FIELDA #FIELDB

Top of page

Field Representation

Value Meaning Statements Explanation
B blinking (*)

ASSIGN
COMPUTE
MOVE
DISPLAY
FORMAT
INPUT
PRINT
REINPUT
WRITE

The value of the field is displayed blinking.
C cursive/italic (*) The value of the field is displayed cursive/italic.
D default intensity The value of the field is displayed with normal intensity, that is, not highlighted in any way. This is the default value.
I intensified The value of the field is displayed intensified.
N non-display A value entered in the field will not be displayed.
U underlined The value of the field is displayed underlined.
V reverse video (*) The value of the field is displayed reverse video.
Y dynamic attributes

INPUT
DISPLAY
PRINT
WRITE

Attributes are to be controlled via an attribute control variable (Format C).

* The field representation attributes marked with an asterisk (*) require corresponding hardware features, and will be ignored at runtime if these features are not available.

Top of page

Field Alignment

Value Meaning Statements Explanation
L left-justified

DISPLAY
FORMAT
INPUT
PRINT
REINPUT
WRITE

The value of the field is displayed left-justified. This is the default value for alphanumeric fields.
R right-justified The value of the field is displayed right-justified. This is the default value for numeric fields.
Z leading zeros Numeric values are displayed with leading zeros, right-justified.

Top of page

Field Input/Output Characteristics

Value Meaning Statements Explanation
A input field, non-protected

INPUT
FORMAT

The value of the field is to be entered in response to the INPUT statement. This is the default value.
input only

CALLNAT
CALLDBPROC
OPEN DIALOG
PERFORM
SEND EVENT
SEND METHOD
Function Call

If you mark a parameter with AD=A, its value will not be passed to the called object (subprogram, stored procedure, subroutine, dialog, method), but it will receive a value from the called object.

For a field defined with BY VALUE in the called object's parameter data area, the calling object cannot receive a value. In this case, AD=A only causes the field to be reset to the low value of the respective format (blanks for alphanumeric, binary zeroes for binary and zeroes for numeric fields) before the object is called.

For CALLNAT, AD=A may be useful for remote subprograms executed via Natural RPC in a client/server environment to reduce the load of data sent. If a subprogram is executed locally, AD=A fields will be reset to the low value of the respective format before the object is called.

If for SEND METHOD, a method is not implemented in Natural, the behavior depends on the method implementation. The parameter is then passed as an initialized variant. Whether the external component is able to return a value is described in the documentation of the external component. It can also be viewed in the Natural Component Browser.

M output field, modifiable

INPUT
FORMAT

The value of the field is to be displayed during INPUT statement execution, and a different value may be entered by the user. The field is an output field and may be modified.
modifiable

CALLNAT
CALLDBPROC
OPEN DIALOG
PERFORM
SEND EVENT
SEND METHOD
Function Call

By default, the passed value of a parameter can be changed in the called object (subprogram, stored procedure, subroutine, dialog, method) and the changed value passed back to the calling object, where it overwrites the original value.

For a field defined with BY VALUE in the called object's parameter data area, no value is passed back.

If, for SEND METHOD, a method is not implemented in Natural, the behavior depends on the method implementation. The parameter is then passed BY REFERENCE. Whether the external component accepts a by reference or by value parameter is described in the documentation of the external component. It can also be viewed in the Natural Component Browser.

O output field, write-protected

INPUT
FORMAT

The value of the field is to be displayed during INPUT execution. The field is an output field and may not be modified.
non-modifiable

CALLNAT
CALLDBPROC
OPEN DIALOG
PERFORM
SEND EVENT
SEND METHOD
Function Call

If you mark a parameter with AD=O, the passed value can be changed in the called object (subprogram, stored procedure, subroutine, dialog, method), but the changed value cannot be passed back to the calling object; that is, the field in the calling object retains its original value.

Internally, AD=O is processed in the same way as a call-by-value (see BY VALUE in the section Parameter Data Definition in the description of the DEFINE DATA statement).

If for SEND METHOD, a method is implemented in Natural, the parameter is treated like it was defined BY VALUE in the method's parameter data area (see the PARAMETER clause of the INTERFACE statement).

If for SEND METHOD, a method is not implemented in Natural, the behavior depends on the method implementation. The parameter is then passed BY VALUE. Whether the external component accepts a call by reference or by value parameter is described in the documentation of the external component. It can also be viewed in the Natural Component Browser.

P temporarily protected

INPUT
REINPUT

Used in conjunction with an attribute control variable (Format C), the DY parameter (dynamic attributes), and the REINPUT statement.

Note:
The Field Input/Output Characteristics A, M and O of the AD parameter may be also specified in Function Calls.

Top of page

Interpretation of Alphanumeric Fields

Value Meaning Statements Explanation
Q display alphanumeric field as if it were a numeric field

ASSIGN
COMPUTE
MOVE
DISPLAY
FORMAT
INPUT
PRINT
REINPUT
WRITE

This attribute is available on mainframe computers only. A corresponding hardware feature is required.

An alphanumeric field is interpreted as if it were a numeric field. If the field is displayed under the scope of profile or session parameter PM=I, the value of the field is interpreted from left to right instead of right to left.

Top of page

Mandatory Input

Value Meaning Statements Explanation
E value mandatory

INPUT
FORMAT

A value must be entered in the field in response to an INPUT statement; otherwise an error message will be issued. This is only relevant for input-only fields (AD=A).
F value optional

INPUT
FORMAT

A value can, but need not, be entered in the field in response to an INPUT statement. This is the default value.

Top of page

Length of Input Value

Value Meaning Statements Explanation
G value size

INPUT
FORMAT

The value entered in the field in response to an INPUT statement must be of the same length as the field. This is only relevant for input-only fields (AD=A).
H value size

INPUT
FORMAT

The value entered in the field in response to an INPUT statement may be shorter than the field. This is the default value.

Top of page

Field Upper/Lower Case Characteristics

Value Meaning Statements Explanation
T translate lower to upper case

INPUT
FORMAT

The value entered is to be translated to upper case.
W accept lower case

INPUT
FORMAT

Lower case values are to be accepted. To make AD=W effective, you have to specify the value ON for the Natural profile parameter LC. This is the default value.

Top of page

Filler Character

Value Meaning Statements Explanation
'c' filler character

INPUT
FORMAT

The empty field is to be filled with the specified character c (for display only) if AD=A (input field, non-protected) or AD=M (output field, modifiable) is specified.

Before the value is displayed for a modifiable field (AD=M), field positions that are not occupied by the value are filled with the specified filler character as follows:

If the user enters a value in response to the INPUT statement, before the value has been assigned to the field,

Caution:
Filler characters that may occur as part of the value in either leading or trailing position should be avoided to prevent undesired results. For example, if the filler character "0" (zero) is defined for a field of format N5 and the value 00100 is entered as input data, leading and trailing zeroes are removed so that only the value 1 remains, and will be assigned to the field. For the same reason, the minus sign "-" should be avoided as a filler character for numeric fields if negative values are to be entered.

Top of page