Version 4.2.6 for Mainframes (Update)
 —  Utilities  —

Keywords and Variables in Direct Commands

This section describes all keywords and variables that are relevant when using direct commands in online or batch mode. Each keyword represents a parameter that is used to specify object selection criteria or set an option for the command being executed. If indicated, a variable value must be supplied with a keyword.

The symbols used in the syntax diagrams shown below correspond to the syntax symbols used for system commands which are explained in System Command Syntax in the System Commands documentation.

For the direct command syntax to which the keywords refer, including details on the where-clause and the with-clause mentioned in this section, refer to the object-type specific sections of the SYSMAIN Utility documentation.

This section also covers the following topics:


Description of Keywords

This section explains the keywords and corresponding variable values (if required) used in a direct command.

Keywords are listed alphabetically. Letters in italics represent variable values that must be supplied with a keyword. For each variable value, the Natural data format and length is indicated.

Keyword Value

Natural Data
Format/Length

Explanation

ALL
or
A

name A9 Only applies to programming objects.

The name of the object to be processed or a range of names (see also Specifying a Range of Names). Any saved (source) objects and/or cataloged objects are processed.

AS new-name

A8
or
A12

Not applicable to DL/I subfiles and DDMs.

The new name to be given to an object when it is renamed with the RENAME command.

Format/length A12 only applies to debug environments.

new-number N4 For error messages:

The new number to be given to an error message, or the start number of a range of new numbers to be given to a range of existing error messages when using the RENAME command.

CATALOGED name A9 Only applies to programming objects.

The name of the cataloged object to be processed or a range of names (see also Specifying a Range of Names).

CIPHER cipher A8 The Adabas cipher code of a source file and/or target system file which is used in a where-clause.

For rules and DDMs: The corresponding DIC specification can be used instead of CIPHER. If cipher is specified twice, the one specified last will be used.

DBID dbid N5 The database ID (DBID) of a source or a target database.

The source database contains the system file where the object to be processed is stored. The target database contains the system file to which the object is to be copied or moved, or where the object is renamed (or in the case of an error message, renumbered) if relevant.

Valid DBIDs are 1 to 65535.

If no DBID or file number (FNR) is specified and SYSMAIN is called with the system command SYSMAIN or the subprogram MAINUSER (see also Invoking SYSMAIN with Appl. Programming Interface), the following applies: The DBID and FNR of the system file from which SYSMAIN was called are always used. For example: if you enter SYSMAIN from a library contained in the FUSER system file, the DBID and FNR of this file are used.

For rules and DDMs: The corresponding DIC specification can be used instead of DBID. If dbid is specified twice, the one specified last will be used.

DDM
or
VIEW

name A32 Only applies to DDMs.

The name of the DDM to be processed or a range of names. See also Specifying a Range of Names.

DDMDBID
or
DDBID

ddm-dbid N5 Only applies to DDMs.

The DDM database ID (DBID): All DDMs that were cataloged under the specified DBID are processed.

Valid DDM DBIDs are 0 to 65535. If no value or 0 (zero) is specified, the DDM DBID is not checked.

DDMFNR
or
DFNR

ddm-fnr N5 Only applies to DDMs.

The DDM file number (FNR): All DDMs that were cataloged under the specified FNR are processed.

Valid DDM FNRs are 0 to 65535. If no value or 0 (zero) is specified, the DDM FNR is not checked.

DEBUG name A12 Only applies to debug environments.

The name of the debug environment to be processed or a range of names. See also Specifying a Range of Names.

DIC

dbid
fnr
password
cipher

A80 Not applicable to error messages, profiles and DL/I subfiles.

Specifies the environment of the FDIC source and/or target system file: database ID (dbid), file number (fnr), Adabas password (password) and Adabas cipher code (cipher).

For rules and DDMs: DBID, FNR, CIPHER and PASSWORD specifications can be used instead of the corresponding DIC specifications, or vice versa. If an item is specified twice, the one specified last will be used.

DL1
or
SUBFILES
or
S

name A8 Only applies to DL/I subfiles.

The name of the DL/I subfile to be processed or a range of names. See also Specifying a Range of Names.

ERROR number N4 Only applies to error messages.

The number of the error message to be processed or the start number of a range of numbers if THRU is specified.

EXTEND - - Only applies to programming objects and the LIST or FIND command when being used in batch mode.

If EXTEND is not specified, a short list of the objects contained in the specified library is displayed. The short list contains the name and the type of the object and indicates whether a source object and/or a cataloged object exists.

If EXTEND is specified, an extended list of the objects contained in the specified library is displayed. In addition to the information displayed if EXTEND is not specified, the extended list provides information from the object directory: programming mode, Natural version, user ID, saved/cataloged date and time, and the source of the object (if any).

FROM
or
FM
or
IN

lib-name A8 For programming objects, debug environments and error messages: Specifies a source library.

For profiles, rules, DDMs and DL/I subfiles: Introduces a where-clause.

FMDATE
or
FMDD

date-from A10 Only applies to programming objects.

The start date of a time period: All objects which were saved or cataloged on or after the specified date are processed.

If no end date is specified with TODATE , all objects from the specified date are selected for processing.

A date must be specified according to the setting of the DTFORM profile parameter (see DTFORM - Date Format in the Parameter Reference documentation) as indicated in the upper right corner of a SYSMAIN menu screen. The default setting is the international format YYYY-MM-DD (YYYY = year, MM = month, DD = day), for example, 2005-08-20.

FMTIME
or
FMTM
or
FMTT

time-from A5 Only applies to programming objects and if FMDATE is specified.

Specifies a start time: All objects which were saved or cataloged at or after the specified time (and date) are processed.

A time must be specified in the format HH:II (HH = hours, II = minutes), for example, 11:33.

FNR fnr N5 The file number (FNR) of a source or a target system file (FNAT, FDIC or FUSER).

The source system file contains the object to be processed. The target system file is the system file to which the object is to be copied or moved, or where the object is renamed (or in the case of an error message, renumbered) if relevant.

Valid FNRs are 1 to 65535.

If no database ID (DBID) or FNR is specified and SYSMAIN is called with the system command SYSMAIN or the subprogram MAINUSER (see also Invoking SYSMAIN with Appl. Programming Interface), the following applies: The DBID and FNR of the system file from which SYSMAIN was called are always used. For example: if you enter SYSMAIN from a library contained in the FUSER system file, the DBID and FNR of this file are used.

For rules and DDMs: The corresponding DIC specification can be used instead of FNR. If fnr is specified twice, the one specified last will be used.

HELP
or
?

- - Activates online selective processing.

You can either include the keyword HELP in the with-clause or enter a question mark (?) as the final character of an object name.

LANGUAGE language A9 Only applies to error messages.

The code of the language of the error message to be processed.

The languages can be specified using any combination of language codes. For information on which language code is assigned to which language, see Language Code Assignments in *LANGUAGE in the System Variables documentation. See also Specifying Languages.

You can use an asterisk (*) to select all existing languages of the error messages to be processed.

LIBRARY
or
APPLIC
or
APL

lib-name A8 Only applies to programming objects, debug environments and error messages.

An optional keyword that indicates the name of a source or a target library. If you omit the keyword and respective value, the library where you logged on before you invoked SYSMAIN is used for processing.

The source library contains the object to be processed. The target library is the library to which the object is to be copied or moved, or where the object is renamed (or in the case of an error message, renumbered).

For system error messages, specify NATURAL-SYSTEM or NATURAL-SYS as lib-name.

lib-name must be specified immediately after the FROM and TO keywords. If the optional keyword LIBRARY is used, it must be entered between FROM or TO and lib-name.

MON
or
NOMON
or
MONOFF

- - Not applicable in batch mode.

Activates (MON) or deactivates (NOMON or MONOFF) tracing of the current activity in SYSMAIN. During processing, you are informed as to which object is being read, deleted, updated, added, and whether an error occurs. With programming objects, you are also informed about the action taken with the XRef data. This function is effective only with TP environments which can run in non-conversational mode.

NAME vsam-name A8 The DDNAME/FCT entry for the source or target file number.

PROMPT
or
NOPROMPT

- - Not applicable in batch mode.

Enables (PROMPT) or disables (NOPROMPT) the SYSMAIN prompts. With NOPROMPT, no confirmation screen is displayed. For example, before any deletion, SYSMAIN prompts you for confirmation.

PASSWORD or
PSW

password A8 The Adabas password of a source file and/or target system file which is used in a where-clause.

For rules and DDMs: The corresponding DIC specification can be used instead of PASSWORD. If password is specified twice, the one specified last will be used.

PROFILE name A8 Only applies to profiles.

The name of the profile to be processed or a range of names. See also Specifying a Range of Names.

RCOP - - Specifies that a copy of the object being renamed is to be made.
REPLACE - - Activates the replace option used in a with-clause.

An object with the same name in the target environment is replaced by the object to be processed.

Note:
If a programming object is replaced it is also deleted from the Natural buffer pool; any existing cross-reference records are also deleted if Predict is installed.

RULE name A32 Only applies to rules.

The name of the rule to be processed or a range of names. See also Specifying a Range of Names.

SAVED name A9 Only applies to programming objects.

The name of the saved (source) object to be processed or a range of names. See also Specifying a Range of Names.

SEC

dbid
fnr
password
cipher

A80 Not applicable to profiles and DL/I subfiles.

Specifies the environment of the FSEC source and/or target system file: database ID (dbid), file number (fnr), Adabas password (password) and Adabas cipher code (cipher).

SETNO set-number N2 The number of the retained Predict set created with the Predict XRef save set option of the LIST XREF command. You can apply all SYSMAIN processing functions to the objects included in this set.

If any valid number is specified, SYSMAIN assumes a Predict set. If no number is specified, normal object processing is assumed.

SETLIBRARY set-library A8 Activates the option to overwrite the library specification for a Predict set as a part of the security for Predict files.

SETLIBRARY is only evaluated if a valid number has been specified for SETNO.

SETUSER set-user A8 Activates the option to overwrite the user-ID specification for a Predict set as a part of the security for Predict files.

SETUSER is only evaluated if a valid number has been specified for SETNO.

STOWED
or
BOTH

name A9 Only applies to programming objects.

The name of an object (or a range of names) for which the saved (source) and the cataloged object are to be processed (see also Specifying a Range of Names). Only an object that exists as both a saved object and a cataloged object is processed.

The exceptions to this are copycode, text and recording, neither of which can be cataloged. However, they are included in processing when this option is specified.

THRU

number
or
new-number

N4 Only applies to error messages.

The end number of a range of error message numbers to be processed if a start number is specified with AS .

TID terminal-ID A8 Only applies to programming object.

A terminal ID: All objects that were saved or cataloged on the specified terminal are processed.

TO lib-name A8

For programming objects, debug environments and error messages:
Specifies a target library.

For profiles, rules, DDMs and DL/I subfiles: Introduces a where-clause.

TODATE
or
TODD

date-to A10 Only applies to programming objects.

The end date of a time period: All objects which were saved or cataloged on or before the specified date are processed. A start date can be specified with FMDATE .

A date must be specified according to the setting of the DTFORM profile parameter (see DTFORM - Date Format in the Parameter Reference documentation) as indicated in the upper right corner of a SYSMAIN menu screen. The default setting is the international format YYYY-MM-DD (YYYY = year, MM = month, DD = day), for example, 2005-08-20.

TOTIME
or
TOTT
or
TOTM

time-to A5 Only applies to programming objects and if TODATE is specified.

The end time of a time period: All objects which were cataloged or saved at or before the specified time (and date) are processed.

The time must be specified in the format HH:II (HH = hours, II = minutes), for example, 11:33.

TYPE type - The type of programming object, error message, profile, rule or DL/I subfile to be processed as listed in TYPE Specification below.

USER
or
USR

user-id A8 Only applies to programming objects.

A user ID: All objects that were saved or cataloged by the specified user are processed.

WHERE where-clause - An optional keyword that indicates the start of a where-clause.

The where-clause must always follow the FROM or TO keyword and lib-name (if relevant); the sequence of the keywords and values within the clause can be specified in any order.

For details, see the direct command syntax in the object-type specific sections of the SYSMAIN Utility documentation.

WITH with-clause - An optional keyword that indicates the start of a with-clause.

The keywords and values of the with-clause can be specified in any order, and the with-clause can be placed in any location within the direct command string, except in the first three positions.

For details, see the direct command syntax in the object-type specific sections of the SYSMAIN Utility documentation.

XREF

F
or
N
or
S
or
Y

A1
Only applies to programming objects.
   
Indicates whether cross-reference (XRef) data stored on Predict system files is to be processed.
   
You can specify one of the following values:
   
F All XRef data is processed and the object must be documented in Predict.
N XRef data is not processed, except when using the DELETE command. If a cataloged object is deleted or replaced, SYSMAIN always deletes any existing XRef data for this object.
S A specified object is processed regardless of whether it has XRef data or not.
Y All XRef data is processed.
   
For further details, see XRef Considerations.

TYPE Specification - Programming Objects

Natural Data Format/Length: A20

The following table lists all valid object-type codes for programming objects:

Code Object Type
P Program
N Subprogram
S Subroutine
M Map
H Helproutine
O ISPF macro
3 Dialog
5 Processor
A Parameter data area
G Global data area
L Local data area
C Copycode
T Text
R Report
Z Recording
4 Class
7 Function
8 Adapter
9 Resource
* All programming object types

TYPE Specification - Error Messages

Natural Data Format/Length: A1

The following table lists all valid type codes for error messages:

Code Type
S Short error message
E Extended (long) error message
A All error message types: short and/or extended messages

TYPE Specification - Profiles

Natural Data Format/Length: A3

The following table lists all valid type codes for profiles:

Code Type
E Editor profile
D Device profile
M Map profile
P Parameter profile
* All profile types.

TYPE Specification - Rules

Natural Data Format/Length: A2

The following table lists all valid type codes for rules:

Code Type
A Automatic rule
F Free rule
AF All rule types: automatic and/or free rules.

TYPE Specification - DL/I Subfiles

Natural Data Format/Length: A1

The following table lists the valid type codes for DL/I subfiles:

Code Type
D NDBs and UDFs
P NSBs

Top of page

Specifying a Range of Names

All SYSMAIN functions provide the option to specify either a name or a range of names for the objects to be processed. In addition, in menu mode, on a Find Selection or List Selection screen, you can specify a name or a range of names to limit the number of objects displayed. See also To shorten a selection list in Using a Selection List.

When using the find or the list function with programming objects, you can also specify a range of library names. The same applies when using the list function with debug environments or the find function with error messages. However, specifying library ranges may have a negative effect on the response time depending on how often the selection criteria occur.

The valid notations for name ranges are listed below where value denotes any combination of one or more characters:

Input Items Selected
* All items.
value* All items with names that start with value.

Example: AB*
Selected: AB, AB1, ABC, ABEZ
Not selected: AA1, ACB

value>

All items with names greater than or equal to value.

Example: AB>
Selected: AB, AB1, BBB, ZZZZZZZ
Not selected: AA1, AAB

value<

All items with names less than or equal to value.

Example: AX<
Selected: AB, AWW, AX
Not selected: AXA, AY

Top of page