Version 4.2.6 for Mainframes (Update)
 —  Statements  —

MERGE - SQL

MERGE INTO table-name [[AS] correlation-name]
  [include-columns] USING source-table
  ON search-condition
  WHEN matching-condition THEN modification-operation ...
  [NOT ATOMIC CONTINUE ON SQLEXCEPTION]
  [QUERYNO integer]

This document covers the following topics:

For an explanation of the symbols used in the syntax diagram, see Syntax Symbols.

Belongs to Function Group: Database Access and Update

See also MERGE - SQL in the Natural for DB2 part of the Database Management System Interfaces documentation.


Function

The MERGE statement updates a table using the specified input data. Rows in the target table that match the input data are updated as specified, and rows that do not exist in the target table are inserted.

The MERGE statement belongs to the SQL Extended Set.

Top of page

Restriction

This statement is available only with Natural for DB2.

Top of page

Syntax Description

Syntax Element Description
MERGE INTO
MERGE INTO Clause:

MERGE initiates an SQL MERGE statement, which is a combination of an SQL INSERT and an SQL Searched UPDATE statement.

table-name
Table Name:

Identifies the target of the INSERT or UPDATE operation of the MERGE statement. See table-name specification.

[AS] correlation-name
[AS] correlation-name Clause:

Specifies an alternate name for the target table. The alternate name can be used as qualifier when referencing columns of the intermediate result table.

include-columns
Include Columns Clause:

Specifies a set of columns that are include, along with the columns of the target table, in the result table of the MERGE statement if it is nested in the FROM clause in a SELECT statement. The included columns are appended to end of the column list identified by the target table. See include-columns.

USING source-table
USING source-table Clause:

Specifies the values for the row data to merge into the target table. See source-table.

ON search-condition
ON search-condition Clause:

Specifies join conditions between the source-table and the target table. Each column name in the search condition must name a column of the target table or source-table.

WHEN matching-condition
WHEN matching-condition Clause:

Specifies the condition under which the modification-operation is run.

THEN modification-operation
THEN modification-operation Clause:

Specifies the operation to run when the matching-condition is evaluates to true.

NOT ATOMIC CONTINUE ON SQLEXCEPTION
NOT ATOMIC CONTINUE ON SQLEXCEPTION Clause:

Specifies whether merge processing continues in case an error occurred during processing one row of a set of source rows.

QUERYNO integer
QUERYNO integer Clause:

Specifies the number for this SQL statement that is used in EXPLAIN output and DB2 trace records.

source-table

(VALUES

values-single-row
values-multiple-row

)
  [AS] correlation-name (column-name),...
Syntax Element Description
VALUES VALUES introduces the specification of values for the row data to merge into the target table.
values-single-row Specifies a single row of source data.
values-multiple-row Specifies multiple rows of source data.
[AS] correlation-name Specifies a correlation name for the source-table.
column-name Specifies a column name to associate the input data to the SET assignment-clause clause for an UPDATE operation or the VALUES clause for an INSERT operation.

values-single-row

expression

NULL

expression,...

NULL
Syntax Element Description
expression Specifies a scalar expression as described in scalar expressions.
NULL Specifies the null value.

values-multiple-row

expression

host-variable-array
NULL

expression,...

host-variable-array
NULL
FOR

host-variable

ROWS
integer-constant
Syntax Element Description
expression Specifies a scalar expression as described in scalar expressions.
host-variable-array Specifies a host variable array or an index range of an array. If host-variable-array are specified, the compiler option DB2ARRY has to be set to ON. An optional indicator array can be specified for each host-variable-array by the keyword INDICATOR, that is, host-variable-array INDICATOR [:]indicator-arry.
NULL Specifies the null value.
FOR ... ROWS Specifies the number of rows to merge. host-variable or integer-constant is assigned to a value k. k must be in the range of 0 to 32767 and must be lower than or equal to the minimum size of all specified host-variable-arrays.

matching-condition

MATCHED

NOT MATCHED
Syntax Element Description
MATCHED Specifies the operation to perform on the rows where the ON search-condition is true. Only UPDATE can be specified after the THEN keyword.
NOT MATCHED Specifies the operation to perform on the rows where the ON search-condition is false. Only INSERT can be specified after the THEN keyword

modification-operation

UPDATE SET assignment-clause

insert-operation
Syntax Element Description
UPDATE SET Specifies the UPDATE operation to run when the matching-condition evaluates to true.

See assignment-clause below.

insert-operation Specifies the insert-operation to run for the rows where the matching condition evaluates to false.

assignment-clause

column-name =

expression

,...

DEFAULT
NULL
(column-name,...) = (

expression,...

,...)
DEFAULT
NULL
Syntax Element Description
column-name Specifies the column for which an insert value is provided.
expression Specifies the new value for the column. An expression can contain references to columns of the source-table or target table. expression cannot contain references to included columns.
DEFAULT Specifies the default value for the column. The value that is assigned depends on how the column is defined.
NULL Specifies the null value as new value for the column.

insert-operation

INSERT [(column-name,...)] VALUES (

expression

,...)
DEFAULT
NULL
Syntax Element Description
INSERT Specifies the INSERT operation to run for the rows where the matching condition evaluates to false.
column-name Specifies the column for which a insert value is provided.
VALUES Introduces one or more column values to insert.
expression Specifies the new value for the column. An expression can contain references to columns of the source-table. expression cannot contain references to columns of the target table.
DEFAULT Specifies the default value for the column. The value that is assigned depends on how the column is defined.
NULL Specifies the null value as new value for the column.

Top of page

Examples

Example 1:

Update the inventory at a car dealership. Add new car model to the inventory or update information about existing car model that is already in the inventory.

DEFINE DATA LOCAL            
01 #MODEL (A20)           
01 #DELTA (I4)         
END-DEFINE  
* Setup input host variables
ASSIGN #MODEL = ‘Grand Turbo’
ASSIGN #DELTA := 5
* Insert/Update into INVENTORY table
MERGE INTO CDS-INVENTORY T
  USING (VALUES (:#MODEL, :#DELTA)) AS S(MODEL, DELTA)
  ON T.MODEL = S.MODEL
WHEN MATCHED THEN UPDATE SET T.QUANTITY = T.QUANTITY + S.DELTA 
WHEN NOT MATCHED THEN INSERT VALUES (S.MODEL, S.DELTA)
END TRANSACTION   
END

Example 2:

Update the inventory at a car dealership. Add new car models to the inventory and update information about car models that are already in the inventory. Input comes from Natural arrays. Array specific code is marked with red color.

OPTIONS DB2ARRY ON
DEFINE DATA LOCAL            
01 #MODEL_ARR (A20/1:20)           
01 #DELTA_ARR (I4/1:20))
01 #ROW-COUNT (I4)
01 #NUM-ERRORS (I4)
01 #SQLCODE    (I4)
01 #SQLSTATE   (A5)
01 #ROW-NUM    (I4)           
END-DEFINE  
* Setup input host variables
ASSIGN #MODEL_ARR(1) = ‘Grand Turbo’
ASSIGN #DELTA_ARR(1) := 5
ASSIGN #MODEL_ARR(2) = ‘Blue Car’
ASSIGN #DELTA_ARR(2) := 3
. . .
* Insert/Update into INVENTORY table
CALLNAT 'NDBNOERR' 
MERGE INTO CDS-INVENTORY T
  USING (VALUES (:#MODEL_ARR(*), :#DELTA_ARR(*))
  FOR 20 ROWS) 
  AS S(MODEL, DELTA)
ON T.MODEL = S.MODEL
WHEN MATCHED THEN UPDATE SET T.QUANTITY = T.QUANTITY + S.DELTA 
WHEN NOT MATCHED THEN INSERT VALUES (S.MODEL, S.DELTA)
NOT ATOMIC CONTINUE ON SQLEXCEPTION
* Check outcome of MERGE
PROCESS SQL SYSIBM-SYSDUMMY1                              
  <<GET DIAGNOSTICS                                       
  :#ROW-COUNT  = ROW_COUNT                                
  ,:#NUM-ERRORS = NUMBER>>                                
WRITE 'Number of rows merged             :' #ROW-COUNT /
      'NUMBER OF ERRORS                  :' #NUM-ERRORS 
IF #NUM-ERRORS > 0                                        
  FOR #I = 1 TO #NUM-ERRORS                               
    PROCESS SQL SYSIBM-SYSDUMMY1                          
      <<GET DIAGNOSTICS CONDITION   :#I                   
      :#SQLCODE   = DB2_RETURNED_SQLCODE,                 
      :#SQLSTATE  = RETURNED_SQLSTATE,                    
      :#ROW_NUM = DB2_ROW_NUMBER>>                        
    PRINT 'DB2_RETURNED_SQLCODE:' #SQLCODE                
      'RETURNED_SQLSTATE:' #SQLSTATE                      
      'DB2_ROW_NUMBER:' #ROW_NUM (EM=99Z)                 
  END-FOR                                                 
END-IF                                                    
END TRANSACTION   
END

Top of page