Version 4.2.6 for Mainframes (Update)
 —  Natural Review  —

Getting Started with Natural Review

This section describes the procedures for logging on to Natural Review, using the online help system, using function codes, PF keys and commands, and ending your Natural Review session.

This section covers the following topics:


Natural Review Logon Procedure

Natural Review is a standard Natural application that resides in the Natural library SYSRNM.

Start of instruction setTo access Natural Review:

  1. Access Natural as you do normally.

  2. At the NEXT prompt, enter LOGON SYSRNM and then MENU,

    or enter SYSRNM at the NEXT prompt.

When you have successfully logged on to Natural Review, either the Natural Review logo screen or the Main Menu screen (see below) is displayed.

Note that the SYSRNM utility now runs in utility mode. This means, a LOGON to the library SYSRNM will no longer be performed to start the utility. See the section Utility Activation in the Natural Utilities documentation.

Top of page

Natural Review Main Menu

If you press Enter from the Natural Review logo screen, the Natural Review Main Menu, similar to the one shown below, is displayed.

10:11:35              ***** REVIEW NM UTILITY *****                  2006-03-02
                              - Main Menu -
  
  
  
                    Code  Function
  
                     NM   Natural Monitor System
                     UP   User Profile System
  
  
  
  
  
  
  
  
  REV00001 - Welcome to Review NM running under CICS
  Command ===>
  Enter-PF1---PF2---PF3---PF4---PF5---PF6---PF7---PF8---PF9---PF10--PF11--PF12---
        Help        Exit                                                  Fin 

The Main Menu displays the Natural Review systems available at your site.

Your Natural Review user profile may be configured to bypass the Natural Review Main Menu and display one of the system menus instead.

The Main Menu provides access to the two systems of Natural Review. On the command line, type the code that corresponds to the system you wish to use, and press Enter.

Depending on how Natural Review is configured at your site, you may use any or all of the following systems:

Code System Description
NM Natural Monitor Used to obtain response time and user information about Natural applications running under CICS.
UP User Profile Used to create user profiles that define access privileges to Natural Review.

Top of page

Using the Online Help System

Online help is available for Natural Review systems and functions at any time during the Natural Review session. You may view general help screens describing functions and commands or, if available, help windows for a specific data entry field:

Start of instruction setTo access the general help screens:

Start of instruction setTo access specific help windows for options available in lists:

Start of instruction setTo access help about another context than the current:

The following PF keys are available within the online help system:

PF Key Command Description
PF3 Exit Exit from the display.
PF7 - Scroll one page backwards.
PF8 + Scroll one page forward.
PF9 - - Scroll to the top of the text.
PF10 ++ Scroll to the bottom of the text.

Top of page

Natural Review Function Codes

Natural Review systems are menu-driven. A series of function codes and commands are used to navigate through the systems.

Function codes are used to access both the Natural Review systems and the functions within each system. Functions within systems may contain several "layers" of screens.

Entering a single function code accesses one layer at a time; entering a string of function codes enables you to bypass intervening screens and go directly to the screen you want.

For example, you can display the Summary of Active Users screen by entering the following string on the command line of the Natural Review Main Menu:

NM SA

The NM code accesses the Natural Monitor system, and the SA code accesses the Summary of Active Users screen.

Similarly, you can list the reports that have been started on the Natural Monitor system by entering the following on the command line of the Natural Review Main Menu:

NM RT LS

The NM code accesses the Natural Monitor system, the RT code accesses the Response Time Subsystem, and the LS code accesses the Started Reports screen.

Top of page

Natural Review Commands

Commands are used to perform specific tasks within a function.

Start of instruction setTo issue a Natural Review command:

A command may be included in a string, provided the command is the last element.

Some commands are standard throughout Natural Review, and may be issued from any screen. These include:

Command PF Key Description
COLOR OFF   Return to a noncolor display.
COLOR ON   Display color attributes, if applicable.
EXIT PF3 Terminate the function and return to the menu screen that precedes it.
FIN or QUIT PF12 Terminate the Natural Review session. Assigned to PF12 on the Natural Review Main Menu.

On all other screens PF12 returns you to the Natural Review Main Menu.

HELP or ? PF1 Display the help screens for a particular screen or field. The question mark (?) is used to display help for a specific field. A keyword may be entered after HELP.
LFILE   Display the used system files and allow to change the Natural Review repository files.
LOGO   Display the logo screen.
LOGON library   Log on to the specified Natural library.
MENU PF12 Terminate the function, and return to the Natural Review Main Menu, except when you are already on the Natural Review Main Menu. There PF12 terminates the Natural Review session.
MSG   Display detailed explanations of Natural Review messages. May be issued with or without a message number. If no message number is included, Natural Review displays the explanation for the last message received.
REVPROD   Display the version number of the Natural Review subsystems being used in the current session of Natural Review.

The following PF keys are available on most Natural Monitor screens:

PF Key Command Description
PF1 Help Access the help system.
PF3 Exit Exit from the display.
PF12 Menu Return to the Natural Review Main Menu.

Other Natural Review commands and PF keys are local to a particular system or function. These commands are usually shown on the relevant screen and have PF keys assigned to them.

Commands used in the list functions are not displayed on the screen. These commands may be displayed by using the online help system.

Examples of list functions include the List Started Reports (LS) functions in the Natural Monitor system, and the List User Profiles (LU) function in the User Profile System.

Top of page

Ending a Natural Review Session

There are several ways to end a Natural Review session. Any one of the following may be used:

Start of instruction setTo end the function you are using and return to the menu from which the function was called:

Start of instruction setTo end the function you are using and return to the Natural Review Main Menu:

Start of instruction setTo end your Natural Review session while on the Natural Review Main Menu:

Start of instruction setTo end your Natural Review session from the command line of any Natural Review function:

Top of page