Messages from Program CMPSTART
This document contains the error messages
(CMPnnnn) that may be issued by the program CMPSTART
whose task is to start global common memory pools in Natural under BS2000/OSD.
For information on the program CMPSTART, see
Common Memory Pools in the
Natural Operations documentation.
CMP0001 - p o o l n a m e : GLOBAL POOL IS ACTIVATED
| Expl. |
The common memory pool is successfully enabled and activated.
|
| Actn. |
None. |
CMP0002 - d a t a s p a c e n a m e : DATA SPACE CREATED
| Expl. |
ESA Data Space is successfully created. |
| Actn. |
None. |
CMP0003 - NO PARAMETERS ON SYSDTA FOUND
| Expl. |
In SYSDTA, the parameter definitions are missing. |
| Actn. |
Check the job control for execution of CMPSTART. |
CMP0004 - READING PARAMETERS FROM SYSDTA FAILED
| Expl. |
Error from RDATA macro. |
| Actn. |
Check the job control for execution of CMPSTART. |
CMP0005 - p o o l n a m e : GLOBAL POOL TERMINATED NORMALLY
| Expl. |
Common memory pool successfully terminated. |
| Actn. |
None. |
CMP0006 - d a t a s p a c e n a m e : DATA SPACE SUCCESSFULLY
DESTROYED
| Expl. |
The ESA Data Space was successfully destroyed. |
| Actn. |
None. |
CMP0007 - p o o l n a m e : GLOBAL POOL ABNORMALLY TERMINATED BY
OPERATOR REQUEST
| Expl. |
Common memory pool terminated from operator via console.
|
| Actn. |
None. |
CMP0008 - p o o l n a m e : GLOBAL POOL TERMINATED BY CANCEL
| Expl. |
Common memory pool terminated with CANCEL command. |
| Actn. |
None. |
CMP0009 - p o o l n a m e : ERROR IN MACRO n a m e POOL NOT
ALLOCATED, R15=nn
| Expl. |
An error from macro n a m e has occurred. R15 contains the
error number.
|
| Actn. |
Contact Software AG Support. |
CMP0010 - p o o l n a m e : REQUESTED POOL IS ALREADY ENABLED
| Expl. |
A common memory pool with the defined name is already enabled.
|
| Actn. |
Change the common memory pool name. |
CMP0011 - p o o l n a m e : A GLOBAL NATURAL LOAD POOL MUST BE
ENABLED WITH "PFIX=YES"
| Expl. |
For a global Natural Load Pool parameter PFIX is defined with
NO (default).
|
| Actn. |
Define PFIX=YES for the Natural Load Pool. |
CMP0012 - p o o l n a m e : NATURAL t y p e POOL INITIALIZATION
FAILED, POOL NOT ALLOCATED, R15=nn
| Expl. |
An error during Buffer/Editor/Swap Pool initialization has
occurred. R15 containes the error number.
|
| Actn. |
Contact Software AG Support. |
CMP0013 - DEFINITION OF KEYWORD PARAMETER n a m e MISSING
| Expl. |
To enable the common memory pool, the keyword parameter n a m
e must be defined.
|
| Actn. |
Complete the parameters for this common memory pool. |
CMP0014 - THE OPERAND OF KEYWORD PARAMETER n a m e IS NOT VALID
| Expl. |
Invalid operand for keyword parameter n a m e. |
| Actn. |
Correct the operand for the appropriate keyword parameter.
|
CMP0015 - THE OPERAND OF KEYWORD PARAMETER n a m e EXCEEDS THE MAX.
LENGTH
| Expl. |
The operand of keyword parameter n a m e is too long. |
| Actn. |
Correct the operand for the appropriate keyword parameter.
|
CMP0016 - n a m e IS NOT A VALID NAME FOR A KEYWORD PARAMETER
| Expl. |
Unknown keyword parameter n a m e. |
| Actn. |
Correct the name of the keyword parameter. |
CMP0017 - SPECIFIED SIZE IS TO BIG FOR LOCATION ABOVE
| Expl. |
The defined pool size (operand of keyword parameter SIZE)
exceeds the possible maximum size (2047 megabytes) for a pool location above
the 16-MB line.
|
| Actn. |
Correct the operand of keyword parameter SIZE. |
CMP0018 - SPECIFIED SIZE IS TO BIG FOR LOCATION BELOW
| Expl. |
The defined pool size (operand of keyword parameter SIZE)
exceeds the possible maximum size (10 megabytes) for a pool location below the
16-MB line.
|
| Actn. |
Correct the operand of keyword parameter SIZE |
CMP0019 - ADDRESS ABOVE 13 MB IS INVALID FOR LOCATION BELOW
| Expl. |
The defined number of megabyte (operand of keyword parameter
ADDR) exceeds the possible maximum number (13 megabytes) for a pool location
below the 16-MB line.
|
| Actn. |
Correct the operand of keyword parameter ADDR. |
CMP0020 - ADDRESS BELOW 16 MB IS INVALID FOR LOCATION ABOVE
| Expl. |
The defined number of megabyte (operand of keyword parameter
ADDR) must not be lower than 16 megabytes for a pool location above the 16-MB
line.
|
| Actn. |
Correct the operand of keyword parameter ADDR. |
CMP0021 - WHEN "TYPE" IS DEFINED, DEFINITION OF "LIBR" IS NOT
ALLOWED
| Expl. |
The parameter LIBR is only allowed for a Load Pool. For the
definition of a Load Pool, the parameter TYPE is not allowed.
|
| Actn. |
Correct the pool definition. |
CMP0022 - A LIBRARY IS DEFINED; OPERAND OF "NAME" GREATER 8
CHARACTERS
| Expl. |
The name of a module which shall be loaded into a common
memory pool must not exceed 8 characters.
|
| Actn. |
Correct the operand of keyword parameter NAME. |
CMP0023 - THE NAME OF NATURAL BUFFER POOL EXCEEDS 8 CHARACTERS
| Expl. |
The name of a Natural buffer pool (TYPE=NAT) must not exceed 8
characters.
|
| Actn. |
Correct the operand of keyword parameter NAME. |
CMP0024 - IF "PFIX=YES" IS DEFINED, THE OPERAND OF PARAMETER "ADDR"
MUST BE DEFINED ALSO
| Expl. |
When the address of a common memory pool shall be fixed, the
operand of keyword parameter ADDR must be defined.
|
| Actn. |
Define the operand of keyword parameter ADDR. |
CMP0025 - ONE OPERAND OF PARAMETER "TYPE" OR "LIBR" IS MISSING
| Expl. |
For a load pool, the parameter LIBR is necessary and for all
other pools the definition of parameter TYPE must be done.
|
| Actn. |
Correct the pool definition. |
CMP0026 - IF "DESA=YES" IS DEFINED, PARAMETER "DATA=" MUST BE ALSO
DEFINED
| Expl. |
When ESA Data Space shall be allocated, the size of the data
space must be defined.
|
| Actn. |
Define the operand of keyword parameter DATA. |
CMP0027 - WITH AN ESA DATA SPACE REQUEST, PARAMETER "LIBR" MUST NOT
DEFINED
| Expl. |
For a load pool (parameter LIBR is defined), the request for
ESA Data Space is disallowed and vice versa.
|
| Actn. |
Correct the pool definition. |
CMP0028 - IF MACRO "ASHARE" SHALL BE USED, "PFIX=YES" MUST BE
DEFINED
| Expl. |
When a module shall be loaded with macro ASHARE into a load
pool (LOAD=ASHARE), "PFIX=YES" must be defined.
|
| Actn. |
Correct the operand of keyword parameter PFIX. |
CMP0029 - CMPSTART RUNS ONLY WITH BS2000 VERSION 10.0 AND UP
| Expl. |
The execution of CMSTART is not possible under BS2000/OSD with
a version lower than 10.0.
|
| Actn. |
None. |
CMP0030 - ERROR IN OPERATOR REQUEST, COMMAND NOT FOUND
| Expl. |
The command from an operator request was invalid. |
| Actn. |
Retry the request with a valid command. |
CMP0031 - Job variable name: ERROR FROM MACRO name, R15=nn
| Expl. |
During execution of the job variable, an error from macro
name has occurred. R15 contains the error number.
|
| Actn. |
Contact Software AG Support. |
