| Text | ESY5851 File not on volume. |
| Expl. | The requested file does not exist on the specified volume. |
| Actn. | No action is required. |
| Text | ESY5852 No password supplied / VSAM data space. |
| Expl. | No password was specified before attempting to access a password protected VSAM file. |
| Actn. | Specify a password. |
| Text | ESY5853 Retention cycle unexpired / NEWNAME exists. |
| Expl. | A VTOC-UPDATE RENAME function was attempted; however, the
retention cycle is unexpired, and the NEWNAME still exists. |
| Actn. | Specify a different NEWNAME, or wait until the retention cycle
has expired. |
| Text | ESY5854 Permanent I/O error. |
| Expl. | A permanent I/O error was detected. |
| Actn. | This is probably a hardware error. Contact data center personell. |
| Text | ESY5855 Volume not mounted. |
| Expl. | The requested volume was not mounted. |
| Actn. | Make sure that the volume is mounted before re-issuing the
request. |
| Text | ESY5856 Operator unable to mount volume. |
| Expl. | The operator is not able to mount the volume. |
| Actn. | No action is required. |
| Text | ESY5857 File in use. |
| Expl. | The file is in use. |
| Actn. | Retry later. |
| Text | ESY5858 Not authorized. |
| Expl. | A security violation was detected. |
| Actn. | No action is required. |
| Text | ESY5859 File definition not deleted by RACF. |
| Expl. | The file definition has not been deleted by RACF. |
| Actn. | Execute RACF file deletion. |
| Text | ESY5860 Member under MSHP control or changed with MSHP bypass. |
| Expl. | Member to be overwritten is under MSHP control or was changed
with MSHP bypass. |
| Actn. | Use MSHP=YES to indicate MSHP bypass required. |
| Text | ESY5861 Member contains SYSIPT data. |
| Expl. | Member to be overwritten contains SYSIPT data. |
| Actn. | Use INLINE-DATA=YES to confirm SYSIPT data required or INLINE-DATA=OFF to switch off the SYSIPT indicator. |
| Text | ESY5870 RECORD field not in search buffer. |
| Expl. | RECORD must be specified for WRITE-FILE. |
| Actn. | Specify RECORD value. |
| Text | ESY5871 MEMBER/MEMBER-TYPE not specified. |
| Expl. | The member name and/or type was not specified. |
| Actn. | Specify a member name and/or type. |
| Text | ESY5872 Record format not supported. |
| Expl. | The record format of the desired data set is not supported. |
| Actn. | No action is required. |
| Text | ESY5873 RECORD-LENGTH missing. |
| Expl. | The RECORD-LENGTH value is missing. |
| Actn. | Specify RECORD-LENGTH value. |
| Text | ESY5874 RECORD-LENGTH > LRECL. |
| Expl. | The specified RECORD-LENGTH value is greater than the LRECL of the data set. |
| Actn. | Specify valid RECORD-LENGTH value. |
| Text | ESY5875 Position of data field > RECORD-LENGTH. |
| Expl. | invalid parameter are given in this view-call. |
| Actn. | check program and correct error. |
| Text | ESY5876 No "NEW-" field for CHANGE request |
| Expl. | No NEW-CLASS, NEW-DESTINATION or NEW-USERID field was supplied for the CHANGE request. |
| Actn. | Supply "NEW-" value |
| Text | ESY5877 VSAM (SHOWCAT) processing error. |
| Expl. | A SHOWCAT error was detected when processing the requested VSAM file. This generally indicates that the requested file is not a a VSAM cluster or non-VSAM file, but rather a VSAM catalog or other VSAM non-file object. Information cannot be displayed about this file. |
| Text | ESY5878 Volume defined as DYNAM/D pool name. |
| Expl. | The requested volume is defined to Entire System Server as a
DYNAM/D "virtual" pool name. The requested function cannot be performed. |
| Text | ESY5881 Error occurred while opening file. |
| Expl. | An error occurred during OPEN. |
| Actn. | Check the status of the data set. |
| Text | ESY5882 Error occurred while closing file. |
| Expl. | An error occurred during CLOSE. |
| Actn. | Check the status of the data set. |
| Text | ESY5883 Data set is full. |
| Expl. | The data set is full. |
| Actn. | Compress the PDS, or increase the data set size. |
| Text | ESY5886 Event is in use. |
| Expl. | An attempt was made to delete an event someone was waiting for. |
| Actn. | Issue "POST" request prior to delete an event. |
| Text | ESY5887 Event is already defined. |
| Expl. | An attempt was made to define an event which already exists. |
| Actn. | No action is required. |
| Text | ESY5888 Event name must be specified. |
| Expl. | An "EVENTING" request was issued without specifying the
event name. |
| Actn. | Specify an event name. |
| Text | ESY5889 Permanent I/O error while writing data set. |
| Expl. | An I/O error was detected during WRITE access. |
| Actn. | This is probably a hardware error. Contact data center personell. |
| Text | ESY5890 Event does not exist. |
| Expl. | The specified event does not exist. |
| Actn. | No action is required. |
| Text | ESY5891 Timeout while waiting for event. |
| Expl. | A timeout happened before the event was posted. |
| Actn. | No action is required. |
| Text | ESY5893 Getmain failed. |
| Expl. | There was not sufficient storage available to proceed with the
request. |
| Actn. | Notify system programmer. |
| Text | ESY5894 Enable Eventing failed. |
| Expl. | internal eventing error occured. |
| Actn. | contact technical support of Software AG. |
| Text | ESY5895 :1: must be specified. |
| Expl. | Required value :1: was not specified. |
| Actn. | Provide required value. |
| Text | ESY5896 Error occurred when sending E-Mail. |
| Expl. | Severe error occurred during E-MAIL processing. Further
information are returned in field SYSTEM-MESSAGE to identify subfunction and response code. |
| Actn. | Please contact Software AG support. |
| Text | ESY5897 Mailer response :1:. |
| Expl. | Error :1: occurred during E-MAIL processing in Mailer function. E-MAIL was not delivered to recipient(s) if serious error occurred. |
| Actn. | Please contact Entire System Server Administrator. Mailer report
may contain further error diagnostics. |
| Text | ESY5899 Permanent I/O error while reading data set. |
| Expl. | An I/O error was detected during READ access. |
| Actn. | This is probably a hardware error. Contact data center personell. |
| Text | ESY5900 Cannot allocate SYSOUT data set. |
| Expl. | Dynamic allocation of SYSOUT data set failed. |
| Actn. | Contact the system programmer. |
