Natural under UTM Error Messages
This section lists the error messages that may be issued by the Natural
UTM teleprocessing interface. Unlike Natural system messages, the explanatory
long texts to these messages and codes are only available in this document, not
online.
This section covers the following topics:
The error messages are listed in groups in the following order:
| NUInnnn
|
Error messages caused by task initialization errors |
| NUS00nn
|
Error messages caused by user session errors |
| NUWnnnn
|
Warnings |
NUInnnn Messages
The following error messages may be issued by the Natural CICS or
Natural UTM teleprocessing interface. They are caused by task initialization
errors; the content of register 15 (that is, the return code of the
corresponding macro call) is issued with the error message.
NUI0003 - LOCATION OF FRONT PART IS ABOVE THE 16-MB LINE, BUT
PARMOD=(31,ABOVE) NOT DEFINED
| Expl. |
The front part is loaded above the 16-MB line and this is not
defined in parameter PARMOD of macro NATUTM.
|
| Actn. |
Either assemble the macro NATUTM with PARMOD=(31,ABOVE) or
load the front part below.
|
NUI0004 - DMS ERROR nnnn IN OPEN ROLL FILE (nnnn REPRESENTS THE
DMS ERROR CODE)
| Expl. |
Error when trying to open the Natural roll file. |
| Actn. |
Issue the BS2000/OSD command "/HELP
nnnn"
|
NUI0006 - ERROR IN DEQUEUE ACCESS REQUEST
| Expl. |
Error when calling the DEQAR macro. |
| Actn. |
See the error code for the DEQAR macro in the corresponding
BS2000/OSD documentation.
|
NUI0007 - INCORRECT ADDRESS OF Natural LOAD POOL
| Expl. |
The address of the Natural load pool is already being used by
the corresponding UTM task.
|
| Actn. |
Define a fixed load pool address in parameter ADDR of macro
ADDON, respectively module CMPSTART.
|
NUI0008 - ERROR IN ENABLE SERIALIZATION ITEM
| Expl. |
Error when calling the ENASI macro. |
| Actn. |
See the error code for the ENASI macro in the corresponding
BS2000/OSD documentation.
|
NUI0009 - ERROR IN ENACO FOR ROLL FILE
| Expl. |
Error when calling the ENACO macro. A contingency definition
is to be initiated for asynchronous writing to the Natural roll file.
|
| Actn. |
See the error code for the ENACO macro in the corresponding
BS2000/OSD documentation.
|
NUI0010 - ERROR IN ENAEI FOR ROLL FILE
| Expl. |
Error when calling the ENAEI macro. Event-controlled
processing is to be initiated for asynchronous writing to the Natural roll
file.
|
| Actn. |
See the error code for the ENAEI macro in the corresponding
BS2000/OSD documentation.
|
NUI0011 - ERROR IN ENAEI FOR SPOOL PRINT TASK
| Expl. |
Error when calling the ENAEI macro. Event-controlled
processing is to be initiated for the Natural ADVANCED FACILITIES printer task.
|
| Actn. |
See the error code for the ENAEI macro in the corresponding
BS2000/OSD documentation.
|
NUI0012 - USER EXIT "RMSPOOL" NOT FOUND
| Expl. |
The RMSPOOL operand has been defined in the SPOOL keyword
parameter for the NATUTM macro. However, the RMSPOOL user exit was found
neither in the non-reentrant nor in the reentrant part.
|
| Actn. |
Either link the user program with the RMSPOOL entry name to
the front-end or reentrant part or correct the SPOOL keyword parameter for the
NATUTM macro.
|
NUI0013 - ERROR IN ENQUEUE ACCESS REQUEST
| Expl. |
Error when calling the ENQAR macro. |
| Actn. |
See the error code for the ENQAR macro in the corresponding
BS2000/OSD documentation.
|
NUI0014 - ERROR IN ENTER NATSPOOL PRINT TASK
| Expl. |
Error when calling the ENTER macro for the Natural Advanced
Facilities printer task.
|
| Actn. |
See the error code for the ENTER macro in the corresponding
BS2000/OSD documentation. Check the parameter definition for the ENTER macro
call in the SPOOL keyword parameter for the NATUTM macro.
|
NUI0016 - Natural NUCLEUS NOT LINKED
| Expl. |
The Natural nucleus could not be found in the Natural load
pool.
|
| Actn. |
Link the Natural nucleus to the reentrant part. |
NUI0017 - THE DEFINITION OF "TERMTAB=SWP" IS ONLY ALLOWED FOR A
GLOBAL SWAP POOL
| Expl. |
The terminal control table can be allocated in a global swap
pool only.
|
| Actn. |
Change the operand of keyword parameter TERMTAB or generate a
global swap pool.
|
NUI0018 - ERROR IN POSSIG FOR SPOOL PRINT TASK
| Expl. |
Error when calling the POSSIG macro for the Natural Advanced
Facilities printer task.
|
| Actn. |
See the error code for the POSSIG macro in the corresponding
BS2000/OSD documentation.
|
NUI0020 - ERROR IN RDTFT OR FSTAT BY LINKNAME N-A-M-E
| Expl. |
Error when calling the RDTFT or FSTAT macro for the Natural
swap file.
|
| Actn. |
See the error code for the RDTFT or FSTAT macro in the
corresponding BS2000/OSD documentation. Check the link name defined for the
swap file in the UTM startup job. The link name for the Natural swap file is
"PAMNAT".
|
NUI0021 - ERROR IN REQM/RELM FOR TASK USER THREAD
| Expl. |
Error when calling the REQM or RELM macro for the
task-related Natural user thread (MAXSIZE).
|
| Actn. |
See the error code for the REQM or RELM macro in the
corresponding BS2000/OSD documentation.
|
NUI0022 - INVALID VERSION OF MACRO BS2STUB
| Expl. |
The version number does not match the driver version.
|
| Actn. |
Use the correct version of macro BS2STUB. |
NUI0023 - SIZE OF Natural ROLL FILE TOO SMALL
| Expl. |
The minimum size for one compressed Natural user work area is
not available (see parameter ROLLTSZ of macro NATUTM).
|
| Actn. |
Calculate the necessary size of the Natural roll file as
follows:
ROLLTSZ / 2 * max. number of users =
nnn
where nnn is the number of PAM
pages
Define a new Natural roll file with the BS2000/OSD file command.
The maximum number of users should be the maximum number of active users
(including those not logged out properly - these are all users registered in
the task file table).
|
NUI0025 - MODULE NATSTUB NOT LINKED
| Expl. |
The NATSTUB module could not be found in the Natural load
pool.
|
| Actn. |
Link the Natural nucleus to the reentrant part. |
NUI0026 - INITIAL. ERROR REPRO-2000: nn
| Expl. |
The REPRO-2000 spool system has signaled an initialization
error (nn).
|
| Actn. |
See the corresponding REPRO-2000 spool system documentation.
|
NUI0027 - LINK-ERROR FOR CSECT/ENTRY P-R-O-G-R-A-M
| Expl. |
The P-R-O-G-R-A-M module is not linked to the front-end part
but defined to the NATUTM macro by the keyword parameters LINK, LINK2, LINK3 or
LINK4.
|
| Actn. |
Check the specifications within the LINK, LINK2, LINK3 or
LINK4 keyword parameters for the NATUTM macro and the INCLUDE statements in the
link job for the non-reentrant part.
|
NUI0028 - DEFINED NUAADDR IS TOO HIGH (NOT BELOW THE 16-MB LINE)
| Expl. |
The address defined for the Natural user work area in an
operand of keyword parameter NUAADDR is not correct.
|
| Actn. |
See the description of keyword parameter NUAADDR in the
section Natural under UTM (in the Natural Teleprocessing Interfaces
documentation).
|
NUI0029 - NATSPOOL PRINTER TASK(S) NOT AVAILABLE
| Expl. |
The event request to the Natural Advanced Facilities printer
task(s) has not been satisfied.
|
| Actn. |
Start the Natural Advanced Facilities printer task(s) before
you start your UTM application.
|
NUI0032 - DEFINED NUAADDR IS ALREADY OCCUPIED AND CANNOT BE USED
| Expl. |
The address defined in the operand of keyword parameter
NUAADDR in macro NATUTM is already occupied.
|
| Actn. |
Review all defined addresses for the common memory pools of
the application and define a free address for the Natural user work area.
|
NUI0036 - SYSTEM ERROR ! ... PLEASE GIVE KDCOFF
| Expl. |
An unrecoverable system error has occurred which makes it
impossible to continue running the Natural UTM application.
|
| Actn. |
The application must be terminated with "KDCSHUT
NORMAL/DUMP". Check the corresponding NUInnnn error
message on your operator console and/or in the SYSLST file
"LST.UTM-Anwendungsname.TSN".
|
NUI0037 - ERROR IN MINF SVC
| Expl. |
Error when calling the MINF macro for the Natural user work
area.
|
| Actn. |
See the error code for the MINF macro in the corresponding
BS2000/OSD documentation and contact Software AG Support.
|
NUI0038 - MINF FOR AN AREA GREATER 32 MB NOT POSSIBLE
| Expl. |
The parameter MAXSIZE in macro NTSWPRM is defined with a
value greater than 32 MB.
|
| Actn. |
Correct the operand of parameter MAXSIZE in macro NTSWPRM.
|
NUI0040 - FRONT AND REENTRANT PART HAVE A DIFFERENT ADDRESS MODE
OR FRONT PART LOCATION
| Expl. |
The operand of the PARMOD keyword parameter in macro NATUTM
is not identical with the one specified for the NURENT macro.
|
| Actn. |
Check the operand defined for keyword parameter PARMOD in the
assembly job for macros NATUTM and NURENT. They must be identical.
|
NUI0042 - ENTRY ADDRESS OF ADABAS LINK MODULE NOT FOUND OR
DUPLICATE ENTRIES
| Expl. |
Either the module ADALNN is not linked to the front-end part
or the operand of keyword parameter ADACALL in macro NATUTM is defined with
ADACALL=ADABAS and the module ADAUTM is linked to the front-end part.
|
| Actn. |
Check the link job of the front-end part and review the
definition of keyword parameter ADACALL in the assembly job for macro NATUTM.
|
NUI0045 - CLEAR CHARACTER "BLANK" RESP. HEX."40" NOT ALLOWED FOR
UTM KB AND SPAB.
| Expl. |
The operand of max parameter CLRCH in KDCDEF is defined with
CLRCH=C' ' or CLRCH=X'40'.
|
| Actn. |
Define another CLEAR character in KDCDEF. |
NUI0046 - ROLLACC=UPAM-SY IS NOT PERMITTED WHEN A GLOBAL SWAP POOL
IS TO BE USED.
| Expl. |
Synchronous write to the Natural roll file is only possible
if Natural works with a local swap pool.
|
| Actn. |
Either change the operand of parameter ROLLACC in macro
NATUTM to UPAM-AS resp. FASTPAM or define a local swap pool with macro ADDON
for assembling macro BS2STUB.
|
NUI0047 - LOGIC FOR SWAP POOL SERIALIZATION (ENQUEUE/DEQUEUE
YES/NO) IS NOT COMPATIBLE
| Expl. |
The global swap pool is initialized with the enqueue/dequeue
logic for the swap pool serialization and the global variable ENQDEQ in macro
NATUTMis set to NO.
|
| Actn. |
Contact Software AG Support. |
NUI0048 - VORGANGSEXIT NUERROR NOT DEFINED
UTM-TACS:
YYYYYYYY/ZZZZZZZZ
| YYYYYYYY
|
represents the UTM TAC Vorgang. |
| ZZZZZZZZ
|
represents the UTM TAC Actual. |
| Expl. |
For the Natural UTM driver or one or more UTM partial
programs, the Vorgangsexit "NUERROR" is not defined.
|
| Actn. |
Correct the operand EXIT in the TAC definition for the
adequate UTM TACs and define EXIT=NUERROR in KDCDEF.
|
NUI0049 - MODULE NURENT NOT FOUND IN LOAD POOL AND FRONT PART
| Expl. |
The assembled module of macro NURENT could not be found.
|
| Actn. |
Link the assembled module of macro NURENT to the reentrant
part or to the front-end part if a shared Natural nucleus is to be used.
|
NUI0050 - VERSION OF "MULTI-PASS" NOT COMPATIBLE
| Expl. |
The used MULTI-PASS version is not compatible to the used
Natural UTM driver (NATUTM macro).
|
| Actn. |
Use the correct MULTI-PASS version and system maintenance
level (NTMODEM and NTMVCHK macros).
|
NUI0051 - SWAP POOL PARAMETER MODULE (ACMSPRM) NOT FOUND
| Expl. |
The swap pool parameter module is neither linked to the
front-end nor to the reentrant part of the application.
|
| Actn. |
Assemble the swap pool parameter module (macro NTSWPRM) and
link it to the front-end or reentrant part of your application.
|
NUI0052 - ERROR IN REQM FOR AN ASYNCHRONOUS TRANSACTION
| Expl. |
Error when calling the REQM macro for the Natural user thread
of an asynchronous transaction.
|
| Actn. |
See the error code for the REQM macro in the corresponding
BS2000/OSD documentation.
|
NUI0053 - OPERAND OF NUCNAME (NAME OF Natural NUCLEUS) NOT FOUND
| Expl. |
The operand of keyword parameter NUCNAME in macro NATUTM or
macro NTPRM (Natural parameter module) is not defined.
|
| Actn. |
Define the name of the linked Natural reentrant part in the
operand of keyword parameter NUCNAME of macro NATUTM or macro NTPRM (this name
is also the name of the Natural load pool.)
|
NUI0054 - MODULE NATINV NOT LINKED AT FIRST OR INCORRECT VERSION
| Expl. |
Either the module NATINV is not linked as first module in the
reentrant part or the version of NATINV is not correct.
|
| Actn. |
Link the correct version of module NATINV as first module to
the reentrant part of your application.
|
NUI0055 - MODULE N-A-M-E NOT FOUND OR INCORRECT VERSION
| Expl. |
Either the module N-A-M-E was not found or an incorrect
version was going to be used.
|
| Actn. |
Link the correct version of the module to your Natural UTM
application.
|
NUI0056 - GLOBAL SWAP POOL ONLY ALLOWED WITH GLOBAL BUFFER POOL
| Expl. |
The application was started with a global swap pool and a
local Natural buffer pool. However, a global swap pool is allowed in
combination with a global buffer pool only.
|
| Actn. |
Either generate your application with a global Natural buffer
pool or use a local swap pool.
|
NUI0057 - INCORRECT SWAP POOL PARAMETER MODULE
| Expl. |
An incorrectly assembled swap pool parameter module has been
linked to your application.
|
| Actn. |
Correct the errors that occurred when assembling macro
NTSWPRM.
|
NUI0059 - LENGTH OF ROLL THREAD SIZE (ROLLTSZ) IS DIFFERENT IN
USED SWAP POOL
| Expl. |
Your application works with a global swap pool which is
initialized from another application with a different roll thread size.
|
| Actn. |
Correct the operand of keyword parameter ROLLTSZ in macro
NATUTM. The operand of keyword parameter ROLLTSZ must be the same for all
applications which work with the same global swap pool.
|
NUI0060 - ENTRY N-A-M-E IN ADD-ON TABLE OF BS2STUB NOT FOUND
| Expl. |
The entry N-A-M-E could not be found in the add-on table of
the assembled macro BS2STUB.
|
| Actn. |
Define the entry N-A-M-E with macro ADDON and assemble macro
BS2STUB.
|
NUI0061 - OPERAND OF PARAMETER APPLNAM (NATUTM) AND APPLINAME
(KDCDEF) IS DIFFERENT
| Expl. |
The operand defined for keyword parameter APPLNAM in macro
NATUTM is different from the operand of parameter APPLINAME in your KDCDEF
definition.
|
| Actn. |
Correct the operand of keyword parameter APPLNAM in macro
NATUTM.
|
NUI0063 - Natural SWAP POOL SIZE IS LESS THAN USER SLOT SIZE
| Expl. |
The size of the Natural swap pool is less than the size of
one swap pool user slot (parameter SWPSLSZ in macro NTSWPRM).
|
| Actn. |
Enlarge the Natural swap pool; correct the parameter size in
macro ADDON resp. module CMPSTART.
|
NUI0064 - COMMON MEMORY CONTROL POOL IS FULL
| Expl. |
No free space in the control pool available. |
| Actn. |
Clear the control pool using the SYSTP utility function E and
subfunction C; type clear in the command line.
|
NUI0065 - ERROR IN ENAMP RESP. REQMP FOR NAF COMMUNICATION
| Expl. |
Error when calling the ENAMP or REQMP macro for the common
memory pool for the communication with Natural Advanced Facilities.
|
| Actn. |
See the error code for the ENAMP or REQMP macro in the
corresponding BS2000/OSD documentation.
|
NUI0067 - LFH=YES DEFINED, BUT ADDRESS ADAVP NOT FOUND
| Expl. |
The Adabas large file handler is to be used (keyword
parameter LFH in macro NATUTM is defined with LFH=YES), but the module ADAVP is
not linked to the front-end part.
|
| Actn. |
Link the module ADAVP to the front-end part. |
NUI0068 - ROLL FILE NAME NOT IDENTICAL WITH ROLL FILE OF GLOBAL
SWAP POOL
| Expl. |
More than one application is to work with a global swap pool,
but the name of the Natural roll file is different from the roll file name in
the application which has initialized the global swap pool.
|
| Actn. |
Change the name of the Natural roll file in the start job of
the Natural UTM application.
|
NUI0069 - THE DEFINED LOCAL SWAP POOL ALREADY EXISTS
| Expl. |
A local swap pool can only be used by one application.
|
| Actn. |
Change the operand of parameter NAME in macro ADDON for the
swap pool and assemble macro BS2STUB.
|
NUI0070 - OPERAND OF TCTSVE NOT IDENTICAL WITH GLOBAL SWAP POOL
| Expl. |
More than one application is to work with a global swap pool,
but the second operand of keyword parameter TERMTAB in macro NATUTM is
different from keyword parameter TERMTAB in the application which has
initialized the global swap pool.
|
| Actn. |
Correct the second operand of parameter TERMTAB. The operands
of parameter TERMTAB must be identical in all applications which are to work
with the same global swap pool.
|
NUI0071 - OPERAND OF TERMTAB AND/OR SWPUSID NOT IDENTICAL WITH
GLOBAL SWAP POOL
| Expl. |
More than one application is to work with a global swap pool,
but the operand(s) of keyword parameter TERMTAB and/or SWPUSID in macro NATUTM
is different from these keyword parameters in the application which has
initialized the global swap pool.
|
| Actn. |
Correct the keyword parameter TERMTAB and/or SWPUSID in the
assembly job for macro NATUTM.
|
NUI0072 - LOCAL SWP RESP. THE ROLL FILE IS USED BY ANOTHER
APPLICATION
| Expl. |
The defined local swap pool or the Natural roll file is
already used by another application.
|
| Actn. |
Change the operand of parameter NAME in macro ADDON for the
local swap pool and/or create another Natural roll file. Change the name of the
roll file in your start job for the application.
|
NUI0073 - ERROR DURING CLOSE Natural ROLL FILE (FASTPAM:
LINK=AAAAAAAA)
| AAAAAAAA
|
represents the FASTPAM link name. |
| PAMNAT
|
represents the name of the FASTPAM link for WRITE. |
| PAMNATRD
|
represents the name of the FASTPAM link for READ. |
| Expl. |
The access method for the Natural roll file is FASTPAM and an
error has occurred while the Natural roll file was being closed.
|
| Actn. |
Contact Software AG Support. |
NUI0074 - ERROR FROM DISABLE FASTPAM AAAAAAAA FOR BBBBB
| AAAAAAAA
|
represents I/O-AREA POOL or ENVIRONMENT. |
| BBBBB
|
represents WRITE or READ. |
| Expl. |
The access method for the Natural roll file is FASTPAM and an
error has occurred while the FASTPAM environment was being disabled,
respectively while the FASTPAM I/O area pool was being disabled for WRITE or
READ.
|
| Actn. |
Contact Software AG Support. |
NUI0075 - NATURAL PARAMETER MODULE NOT FOUND
| Expl. |
The Natural parameter module is neither linked to the
reentrant nor to the front-end part of the application.
|
| Actn. |
Assemble and link the Natural parameter module to the
reentrant or to the front-end part of the application.
|
NUI0077 - ERROR FROM FILE MACRO CALL FOR FASTPAM LINK NAME
"PAMNATRD"
| Expl. |
The access method for the Natural roll file is FASTPAM and an
error has occurred when calling the FILE macro for the link name PAMNATRD.
|
| Actn. |
Contact Software AG Support. |
NUI0078 - MAX. 5 Natural UTM APPLICATIONS CAN WORK WITH ONE GLOBAL
SWAP POOL
| Expl. |
The global swap pool is resp. was used by five different
Natural UTM applications.
|
| Actn. |
Terminate and restart the global swap pool or define a new
swap pool for the application.
|
NUI0080 - ERROR FROM REQM SVC FOR FASTPAM ACCESS LISTS
| Expl. |
Error when calling the REQM macro for the FASTPAM access
lists.
|
| Actn. |
See the error code for the REQM macro in the corresponding
BS2000/OSD documentation.
|
NUI0081 - ERROR FROM ENAEI SVC DURING ENABLE FASTPAM EVENT ITEM
| Expl. |
Error when calling the ENAEI macro for the FASTPAM event
item.
|
| Actn. |
See the error code for the ENAEI macro in the corresponding
BS2000/OSD documentation.
|
NUI0082 - ERROR FROM DSOFEI SVC (PREPARE FASTPAM EVENT LIST)
| Expl. |
Error when calling the DSOFEI macro for the FASTPAM event
list.
|
| Actn. |
See the error code for the DSOFEI macro in the corresponding
BS2000/OSD documentation.
|
NUI0085 - ERROR DURING ENABLE FASTPAM ENVIRONMENT FOR AAAA
| AAAA
|
represents "asynchronous writes" or "synchronous reads".
|
| Expl. |
The FASTPAM environment for asynchronous writes resp.
synchronous reads could not be enabled.
|
| Actn. |
Contact Software AG Support. |
NUI0086 - ERROR DURING ENABLE FASTPAM I/O AREA POOL FOR AAAA
| AAAA
|
represents "asynchronous writes" or "synchronous reads".
|
| Expl. |
The FASTPAM I/O area for asynchronous writes resp.
synchronous reads could not be enabled
|
| Actn. |
Contact Software AG Support. |
NUI0087 - FASTPAM ERROR DURING OPEN AAAA DMS ERROR: NNNN
| AAAA
|
represents OUTIN, INOUT or INPUT. |
| NNNN
|
represents the DMS error code. |
| Expl. |
Error when trying to open the Natural roll file for FASTPAM.
|
| Actn. |
Issue the BS2000/OSD command "/HELP
NNNN".
|
NUI0088 - FASTPAM ERROR DURING ASYNCHRONOUS WRITE
| Expl. |
An error has occurred during an asynchronous write to the
Natural roll file via FASTPAM.
|
| Actn. |
Contact Software AG Support. |
NUI0089 - FASTPAM ERROR DURING SYNCHRONOUS AAAA
| AAAA
|
represents write or read. |
| Expl. |
An error has occurred during a synchronous write respectively
read to/from the Natural roll file via FASTPAM.
|
| Actn. |
Contact Software AG Support. |
NUI0090 - MODULE BS2STUB NOT FOUND OR BS2STUB EXHIBITS A DIFFERENT
ADDRESS MODE
| Expl. |
The assembled module of macro BS2STUB is not linked to the
front part of the application or the operand of parameter PARMOD in macro
BS2STUB contains a different addressing mode than parameter PARMOD in macro
NATUTM.
|
| Actn. |
Correct the addressing mode (24/31) in the operand of
parameter PARMOD for assembling macro BS2STUB.
|
NUI0091 - THE MODULE BS2STUB IS LINKED, ADD-ON PRODUCT TABLE NOT
AVAILABLE OR INVALID.
| Expl. |
The BS2STUB module is linked to the front-end part of your
application, but no add-on table has been found or the add-on table is invalid.
An error has occurred in the ADDON macro when assembling the module BS2STUB.
|
| Actn. |
Correct the error, reassemble and link. |
NUI0092 - ERROR IN AAAA DURING EXECUTION OF ADD-ON TABLE ENTRY
BBBB
| AAAA
|
represents the name of the called macro. |
| BBBB
|
represents the name of the adequate common memory pool.
|
| Expl. |
Error when calling the macro AAAA
during execution of add-on table entry BBBB.
|
| Actn. |
See the error code for the AAAA
macro in the corresponding BS2000/OSD documentation.
|
NUI0093 - A COMMON MEMORY POOL WITH NAME AAAA IS ALREADY AVAILABLE
| AAAA
|
represents the name of the common memory pool. |
| Expl. |
A new common memory pool is to be enabled but a common memory
pool with the defined name is already available.
|
| Actn. |
Change the operand of parameter NAME in macro ADDON's call to
assemble macro BS2STUB, reassemble and link.
|
NUI0303 - INVALID BLKSIZE FOR ROLL FILE SPECIFIED
| Expl. |
In the FILE command, an invalid block size was specified for
the Natural roll file.
|
| Actn. |
Do not specify a block size in the FILE command for the roll
file (LINK=PAMNAT).
|
NUI0304 - NEW NATURAL ROLL FILE FOR AN OLD GLOBAL SWAP POOL
| Expl. |
An old global swap pool is available and a new Natural roll
file was allocated.
|
| Actn. |
Terminate and restart the swap pool. |
NUI0305 - REDUCED OR INCREASED ROLL FILE SIZE FOR AN OLD GLOBAL
SWAP POOL
| Expl. |
An old global swap pool is available and the size of the roll
file was reduced or increased.
|
| Actn. |
Terminate and restart the swap pool. |
NUSnnnn Messages
The following Natural UTM teleprocessing interface error messages are
caused by user session errors.
NUS0001 - OPERAND OF PARAMETER KB=NNN IN KDCDEF TOO SMALL -
MINIMUM IS NNN BYTES
| NNN
|
represents the minimum KB length in bytes. |
| Expl. |
The UTM driver needs a larger KB length than is defined in
KDCDEF.
|
| Actn. |
Start the KDCDEF again with the corrected KB length. |
NUS0002 - DMS-ERROR AAAA DURING ROLL FILE OPERATION
| AAAA
|
represents the DMS error code. |
| Expl. |
Error when trying to access the Natural roll file. |
| Actn. |
Issue the BS2000/OSD command "/HELP
AAAA".
|
NUS0024 - ERROR IN SOLSIG FOR ASYNCHRONOUS WRITE
| Expl. |
Error when calling the SOLSIG macro for asynchronous writing
to the Natural roll file.
|
| Actn. |
See the error code for the SOLSIG macro in the corresponding
BS2000/OSD documentation.
|
NUS0030 - ERROR IN FILE EVENT CONTROL BLOCK DURING ASYNCHRONOUS
WRITE
| Expl. |
During an asynchronous write to the Natural roll file, the
file event control block contains an error code.
|
| Actn. |
Send the dump to Software AG Support. |
NUS0031 - NEW Natural SESSION INITIATED, PLEASE ENTER UTM TAC:
| Expl. |
UTM recognized a restart situation when the user tried to log
on to the Natural UTM application. The Natural UTM driver terminates the
transaction with "PEND FI".
|
| Actn. |
Enter a valid transaction code and press ENTER. |
NUS0033 - Natural ROLL FILE FULL
| Expl. |
The size of the Natural roll file was specified too small.
|
| Actn. |
Enlarge the Natural roll file (LINK=PAMNAT). |
NUS0034 - ROLL FILE RESP. TERMINAL CONTROL TABLE FULL
| Expl. |
The internal terminal control table is full. |
| Actn. |
If the operand of keyword parameter TERMTAB in macro NATUTM
is defined with TERMTAB=(SWP,...), enlarge the Natural roll file. Otherwise,
enlarge the number of PAM pages in the operand of keyword parameter TERMTAB.
|
NUS0035 - PROG. "AAAAAAAA" FPUT ERROR FOR DEST. "BBBBBBBB" UTM
KCRC:333 1 4444
| AAAAAAAA
|
represents the Natural program name, |
| BBBBBBBB
|
represents the printer name, |
| 333 1 4444
|
is the UTM return code. |
| Expl. |
Error with print job using the UTM command FPUT. |
| Actn. |
See the UTM return code in the corresponding UTM
documentation.
|
NUS0043 - ERROR FROM XXXX - UTM RC: ZZZ
| XXXX
|
represents SPUT or SGET. |
| ZZZ
|
represents the UTM return code. |
| Expl. |
Error from UTM after SPUT or SGET. |
| Actn. |
See the return code in the corresponding UTM documentation
and contact Software AG Support.
|
NUS0044 - LOADING OF PROGRAM XXXXX FAILED, BIND ERRORCODE: ZZZZ
| XXXXX
|
represents the name of the module which is to be loaded
dynamically..
|
| ZZZX
|
represents the error code of the BIND macro. |
| Expl. |
Error from the BIND macro when dynamically loading a 3GL
program.
|
| Actn. |
See the error code for the BIND macro in the corresponding
BS2000/OSD documentation.
|
NUS0058 - ERROR FROM CHKEI IN PAM CONTINGENCY ROUTINE
| Expl. |
Error when calling the CHKEI macro in the PAM contingency
routine.
|
| Actn. |
See the error code for the CHKEI macro in the corresponding
BS2000/OSD documentation and contact Software AG Support.
|
NUS0062 - ERROR FROM MACRO N-A-M-E DURING ACCESS TO SYSLST
| Expl. |
The Natural trace function (ETRACE in macro NTPRM) is
activated and an error has occurred when calling macro N-A-M-E during access to
SYSLST.
|
| Actn. |
See the error code for the N-A-M-E macro in the corresponding
BS2000/OSD documentation and contact Software AG Support.
|
NUS0079 - ERROR FROM RSOFEI SVC (REQUEST FOR FASTPAM ENVIRONMENT)
| Expl. |
Error when calling the RSOFEI macro for requesting a FASTPAM
event.
|
| Actn. |
See the error code for the RSOFEI macro in the corresponding
BS2000/OSD documentation.
|
NUS0088 - FASTPAM ERROR DURING ASYNCHRONOUS WRITE
| Expl. |
An error has occurred during an asynchronous write to the
Natural roll file via FASTPAM.
|
| Actn. |
Contact Software AG Support. |
NUS0089 - FASTPAM ERROR DURING SYNCHRONOUS AAA
| AAA
|
Represents write or read. |
| Expl. |
An error has occurred during an asynchronous write or read to
or from the Natural roll file via FASTPAM.
|
| Actn. |
Contact Software AG Support. |
NUS0094 - FORCED CONVERSATIONAL I/O NOT POSSIBLE
| Expl. |
The execution of a forced conversational I/O was not
possible. The session is terminated.
|
| Actn. |
Contact Software AG Support. |
NUS0302 - ERROR DURING RELOCATION AFTER REFRESH NATURAL LOAD POOL
| Expl. |
The Natural load pool was refreshed and a relocation error
has occurred.
|
| Actn. |
Send a dump to Software AG Support. |
NUWnnnn Messages
The following Natural UTM teleprocessing interface error messages are
warnings.
NUW0019 - WARNING - ERROR IN CSTAT MACRO AFTER ATTEMPT TO DECLARE
THE SWP DIRECTORY AS A RESIDENT DIRECTORY
| Expl. |
The operand of parameter SWDPAGE was defined with value NO
and an error has occurred when calling macro CSTAT, parameters LINK=DYNPRM.
|
| Actn. |
See the error code for the CSTAT macro in the corresponding
BS2000/OSD macro.
|
NUW0039 - WARNING - PARMOD=(31,ABOVE) DEFINED, BUT THE FRONT PART
IS LOADED BELOW THE LINE
| Expl. |
The operand PARMOD of keyword parameter PARMOD in macro
NATUTM is defined with PARMOD=(31,ABOVE), but the front part is loaded below
the 16-MB line.
|
| Actn. |
Correct the link job for the front-end part. The PROG
instruction must contain the operand LOADPT=X'ADDRESS' or LOADPT=*XS.
|
NUW0041 - WARNING - STXIT SVC FAILED WITH RC: NN
| NN
|
represents the error code from macro STXIT. |
| Expl. |
Error when calling the STXIT macro. |
| Actn. |
See the error code for the STXIT macro in the corresponding
BS2000/OSD documentation and contact Software AG Support.
|
NUW0083 - WARNING - FASTPAM ENVIRONMENT FOR AAAA IS NOT RESIDENT
| AAAAA
|
represents "asynchronous writes" or "synchronous reads".
|
| Expl. |
The FASTPAM environment for asynchronous writes or
synchronous reads is not resident.
|
| Actn. |
See the description of keyword parameter ROLLACC in the UTM
section of this documentation (precondition for the access method FASTPAM).
|
NUW0084 - WARNING - FASTPAM I/O AREA POOL FOR AAAA IS NOT RESIDENT
| AAAAA
|
represents "asynchronous writes" or "synchronous reads".
|
| Expl. |
The FASTPAM I/O area pool for asynchronous writes or
synchronous reads is not resident.
|
| Actn. |
See the description of keyword parameter ROLLACC in the UTM
section of this documentation (precondition for the access method FASTPAM).
|
