Natural Advanced Facilities BS2000/OSD Error
Messages
This section contains the messages that may be issued by the front end,
monitor, printer task (print server), or the SERVEND program of
Natural Advanced Facilities (NAF) under the operating system BS2000/OSD.
Unlike Natural system messages, the explanatory long texts to these
messages and codes are only available in this document, not online.
Font End Error Messages
NAI0001 NAF PARAMETER MODULE NOT FOUND
| Expl. |
The Natural Advanced Facilities parameter module could not be
located.
|
| Actn. |
Link the NAF parameter module NAFB2P to the
Natural front end.
|
NAI0002 VERSION OF POOL nnnnnnnn DOES
NOT MATCH
| Expl. |
The NAF version of an existing Common Memory Pool is different
from the version of NAFFRONT.
|
| Actn. |
Change parameter NAFERK1 in the NAF
parameter module NAFB2P.
|
NAI0003 ERROR IN ENAMP, R15: xxxxxxxx
POOL ID nnnnnnnn
| Expl. |
ENAMP execution for the Common Memory Pool with
the name nnnnnnnn failed. Return code
xxxxxxxx is shown in register 15.
|
| Actn. |
Check ENAMP return code in BS2000/OSD macro
manual for details.
|
NAI0004 ERROR IN REQMP, R15: xxxxxxxx
POOL ID nnnnnnnn
| Expl. |
REQMP execution for the Common Memory Pool with
the name nnnnnnnn failed. Return code
xxxxxxxx is shown in register 15.
|
| Actn. |
Check REQMP return code in BS2000/OSD macro
manual for details.
|
NAI0005 ENAIE FAILED, R15: xxxxxxxx
EVENT ID nnnnnnnn
| Expl. |
Enable of the event item
nnnnnnnn failed. Return code
xxxxxxxx is shown in register 15.
|
| Actn. |
Check ENAIE return code in BS2000/OSD macro
manual for details.
|
NAI0007 SIZE OF EXISTING POOL nnnnnnnn
DIFFERS FROM SIZE OF PARAMETER MODULE
| Expl. |
The size of an existing Common Memory Pool differs from the
size, defined in the NAF parameter module.
|
| Actn. |
Check CMPSIZE parameter in
NAFB2B.
|
Monitor Error
Messages
MACRO POSSIG ERROR: xxxxxxxx
| Expl. |
The execution of a POSSIG macro failed with
return code xxxxxxxx.
|
| Actn. |
Check POSSIG return code in BS2000/OSD macro
manual for details.
|
MACRO ENAEI ERROR: xxxxxxxx
| Expl. |
The execution of a ENAEI macro failed with return
code xxxxxxxx.
|
| Actn. |
Check ENAIE return code in BS2000/OSD macro
manual for details.
|
NAF MONITOR: NAF PARAMETER MODULE NOT FOUND
| Expl. |
The Natural Advanced Facilities parameter module could not be
located.
|
| Actn. |
Link the NAF parameter module NAFB2P to the NAF
monitor module.
|
NAF MONITOR: MONITOR SESSION TERMINATED
| Expl. |
The Natural Advanced Facilities monitor session has been
terminated.
|
| Actn. |
None. |
NAF MONITOR: ERROR IN ENABLE POOL, R15:
xxxxxxx
| Expl. |
ENAMP execution for the NAF Common Memory Pool
failed. Return code xxxxxxxx is shown
in register 15.
|
| Actn. |
Check ENAMP return code in BS2000/OSD macro
manual for details.
|
NAF MONITOR: ERROR IN REQMP FOR POOL, R15
xxxxxxxx
| Expl. |
REQMP execution for the NAF Common Memory Pool
failed. Return code xxxxxxxx is shown
in register 15.
|
| Actn. |
Check REQMP return code in BS2000/OSD macro
manual for details.
|
NAF MONITOR: MEMORY POOL nnnnnnnn
INITIALIZED BY MONITOR; ADDR: yyyyyyyy
| Expl. |
The NAF Common Memory Pool with name
nnnnnnnn was successfully initialized
at address yyyyyyyy.
|
| Actn. |
None. |
NAF MONITOR: MEMORY POOL nnnnnnnn
ENABLED BY MONITOR; ADDR yyyyyyyy
| Expl. |
The NAF Common Memory Pool with name
nnnnnnnn was successfully enabled at
address yyyyyyyy.
|
| Actn. |
None. |
NAF MONITOR: EVENTING USING EVENT ID
nnnnnnnn ESTABLISHED
| Expl. |
The event item with name
nnnnnnnn for the communication with the
Natural clients was successfully established.
|
| Actn. |
None. |
NAF MONITOR: ENAIE FAILED, R15: xxxxxxxx
EVENT ITEM nnnnnnnn
| Expl. |
Enable of the event item
nnnnnnnn failed. Return code
xxxxxxxx is shown in register 15.
|
| Actn. |
Check ENAIE return code in BS2000/OSD macro
manual for details.
|
NAF MONITOR: INITIALIZATION FOR MONITOR STARTED
| Expl. |
Startup prompt message. |
| Actn. |
None. |
NAF MONITOR: ERROR IN OPERATOR REQUEST. COMMAND
cccccccc NOT FOUND
| Expl. |
The NAF monitor received the unknown operator command
cccccccc.
|
| Actn. |
Enter correct operator command. |
NAF MONITOR: OPERATOR REQUEST cccccccc
ACCEPTED
| Expl. |
Operator command
cccccccc was accepted by the NAF
monitor.
|
| Actn. |
None. |
NAF MONITOR: ANOTHER MONITOR IS ALREADY ACTIVE FOR EVENT ID
nnnnnnnn
| Expl. |
Monitor task already active with event ID
nnnnnnnn.
|
| Actn. |
None. |
NAF MONITOR: CURRENTLY ACTIVE SESSION PARAMETERS :
| Expl. |
Session parameters are listed, triggered by a
DPARM operator command.
|
| Actn. |
None. |
NAF MONITOR: TIMEINTERVAL : nnn
MINUTES
| Expl. |
The time interval for checking the spool file in minutes.
Message is triggered by a DPARM operator command.
|
| Actn. |
None. |
NAF MONITOR: MESSAGES
| Expl. |
Various monitor messages. This message preceds the output
which is triggered by a DPARM operator command.
|
| Actn. |
None. |
NAF MONITOR: SPOOL FILE
| Expl. |
Database ID and file number of the spool file of the monitor
session. Message is triggered by a DPARM operator
command.
|
| Actn. |
None. |
Printer Task (Print Server) Error Messages
-
NAF SP-SERV: NATURAL BATCH (CMSTART) NOT FOUND
-
NAF SP-SERV: NATURAL BATCH FRONT EXHIBITS A DIFFERENT AMODE OR LOCATION
-
NAF SP-SERV: NATURAL BATCH (FRNTLOC) NOT FOUND
-
NAF SP-SERV: NAF PARAMETER MODULE NOT FOUND
-
NAF SP-SERV: NEW NATURAL SESSION STARTED BECAUSE OF NEW VALUES FOR FNAT/FSEC
-
NAF SP-SERV: DCAM-NEA APPLICATION nnnnnnnn opened/closed/reopened
-
NAF SP-SERV: YOPEN (DCAM) FAILED, R15: xxxxxxxx APPLICATION nnnnnnnn YP ISO
-
NAF SP-SERV: ERROR IN ENABLE POOL, R15: xxxxxxx
-
NAF SP-SERV: ERROR IN REQM FOR POOL, R15: xxxxxxxx
-
NAF SP-SERV: RSP BUFFER CANNOT BE ALLOCATED. R15: xxxxxxxx ABNORMAL END
-
NAF SP-SERV: TERMINATION OF SPOOL SERVER INVOKED BY UTM TERMINATION
-
NAF SP-SERV: TERMINATION OF SPOOL SERVER INVOKED BY PROGRAM ''SERVEND''
-
NAF SP-SERV: POOL CANNOT BE UNLOCKED BY SERVER
-
NAF SP-SERV: YCLSCON FAILED FOR PRINTER nnnnnnnn, R15: xxxxxxxx
-
NAF SP-SERV: NATURAL TERMINATED WITH AN ERROR
-
NAF SP-SERV: SPOOL SERVER TERMINATES. DEFINED ERROR LIMIT EXCEEDED
-
NAF SP-SERV: MEMORY POOL nnnnnnnn ENABLED BY SERVER; ADDR yyyyyyyy
-
NAF SP-SERV: EVENTING USING EVENT ID nnnnnnnn ESTABLISHED
-
NAF SP-SERV: NEW NATURAL SESSION STARTED USING DEFAULTS FROM PARAM-MODULE
-
NAF SP-SERV: REOPEN (DCAM) FAILED, R15: xxxxxxxx APPLICATION nnnnnnnn TYPE ttt
-
NAF SP-SERV: ENACO FOR DCAM FAILED, R15: xxxxxxxx
-
NAF SP-SERV: LOST CONNECTION CALLED FOR pppppppp, REASON (R6) xxxxxxx
-
NAF SP-SERV: DCAM TERMINATION CALLED FOR nnnnnnnn, REASON (R4) xxxxxxxx
-
NAF SP-SERV: ENAIE FAILED, R15: xxxxxxxx EVENT ID nnnnnnnn
-
NAF SP-SERV: TASK TERMINATION. SOLSIG ERROR, R15: xxxxxxxx
-
NAF SP-SERV INITIALIZATION FOR NAF SPOOL SERVER FAILED
NAF SP-SERV: NATURAL BATCH (CMSTART) NOT FOUND
| Expl. |
The entry point CMSTART of the batch Natural
driver front part could not be located.
|
| Actn. |
Include Natural batch driver into link edit of server front
end part.
|
NAF SP-SERV: NATURAL BATCH FRONT EXHIBITS A DIFFERENT AMODE OR
LOCATION
| Expl. |
The load point of the monitor is above the 16 MB line, but the
Natural batch front part is not generated with parameter setting
PARMODE=(31,ABOVE).
|
| Actn. |
Correct parameter PARMODE in Natural
batch driver assembly.
|
NAF SP-SERV: NATURAL BATCH (FRNTLOC) NOT FOUND
| Expl. |
The address of the special entry point FRNTLOC in
the Natural batch front part is not resolved.
|
| Actn. |
Include Natural batch driver into the link edit of server
front end part.
|
NAF SP-SERV: NAF PARAMETER MODULE NOT FOUND
| Expl. |
The Natural Advanced Facilities parameter module could not be
located.
|
| Actn. |
Include NAF parameter mdodule NAFB2P into link
edit of server front end part.
|
NAF SP-SERV: NEW NATURAL SESSION STARTED BECAUSE OF NEW VALUES FOR
FNAT/FSEC
| Expl. |
A new Natural session was started because new values were
defined for the system file FNAT and/or FSEC.
|
| Actn. |
None. |
NAF SP-SERV: DCAM-NEA APPLICATION
nnnnnnnn opened/closed/reopened
| Expl. |
Standard open/close message for the printer task DCAM
application.
|
| Actn. |
None. |
NAF SP-SERV: YOPEN (DCAM) FAILED, R15:
xxxxxxxx APPLICATION
nnnnnnnn YP ISO
| Expl. |
The YOPEN DCAM call of the ISO TYP DCAM
application nnnnnnnn failed with return
code xxxxxxxx.
|
| Actn. |
Check return code in BS2000/OSD DCAM macros manual for
details.
|
NAF SP-SERV: ERROR IN ENABLE POOL, R15:
xxxxxxx
| Expl. |
ENAMP execution for the NAF Common
Memory Pool failed. Return code
xxxxxxxx is shown in register 15.
|
| Actn. |
Check ENAMP return code in BS2000/OSD macro
manual for details.
|
NAF SP-SERV: ERROR IN REQM FOR POOL, R15:
xxxxxxxx
| Expl. |
REQMP execution for the Common
Memory Pool with the name nnnnnnnn
failed. Return code xxxxxxxx is shown
in register 15.
|
| Actn. |
Check REQMP return code in BS2000/OSD macro
manual for details.
|
NAF SP-SERV: RSP BUFFER CANNOT BE ALLOCATED. R15:
xxxxxxxx ABNORMAL END
| Expl. |
The allocation of the remote spool buffer failed with return
code xxxxxxxx. The printer task was
abnormal terminated.
|
| Actn. |
Contact Software AG Support. |
NAF SP-SERV: TERMINATION OF SPOOL SERVER INVOKED BY UTM
TERMINATION
| Expl. |
The UTM application, which had started the printer task
automatically, was terminated.
|
| Actn. |
None. |
NAF SP-SERV: TERMINATION OF SPOOL SERVER INVOKED BY PROGRAM
''SERVEND''
| Expl. |
The printer task was terminated by an execution of the program
SERVEND.
|
| Actn. |
None. |
NAF SP-SERV: POOL CANNOT BE UNLOCKED BY SERVER
| Expl. |
The NAF Common Memory Pool is locked for update by another
task. The maximum wait time for an unlock was exceeded.
|
| Actn. |
None. |
NAF SP-SERV: YCLSCON FAILED FOR PRINTER
nnnnnnnn, R15:
xxxxxxxx
| Expl. |
DCAM call YCLSCON (close connection) for printer
nnnnnnnn failed. Return code
xxxxxxxx is shown in register 15.
|
| Actn. |
Check return code in BS2000/OSD DCAM macros manual for
details.
|
NAF SP-SERV: NATURAL TERMINATED WITH AN ERROR
| Expl. |
The Natural session of the printer task was terminated with an
error.
|
| Actn. |
Check returned error code. |
NAF SP-SERV: SPOOL SERVER TERMINATES. DEFINED ERROR LIMIT
EXCEEDED
| Expl. |
The maximum number of spool printer task abends was exceeded:
MAXERR parameter in
NAF parameter
module NAFB2P.
|
| Actn. |
None. |
NAF SP-SERV: MEMORY POOL nnnnnnnn
ENABLED BY SERVER; ADDR yyyyyyyy
| Expl. |
The NAF Common Memory Pool with name
nnnnnnnn was successfully enabled at
address yyyyyyyy.
|
| Actn. |
None. |
NAF SP-SERV: EVENTING USING EVENT ID
nnnnnnnn ESTABLISHED
| Expl. |
The event item with name
nnnnnnnn for the communication with the
Natural clients was successfully established.
|
| Actn. |
None. |
NAF SP-SERV: NEW NATURAL SESSION STARTED USING DEFAULTS FROM
PARAM-MODULE
| Expl. |
Standard message in case a server restart after an error
occurred. Dynamic parameters are not evaluated again.
|
| Actn. |
None. |
NAF SP-SERV: REOPEN (DCAM) FAILED, R15:
xxxxxxxx APPLICATION
nnnnnnnn TYPE ttt
| Expl. |
Reopen of DCAM application
nnnnnnnn of type
ttt failed with return code
xxxxxxxx. Type
ttt is ISO or NEA.
|
| Actn. |
Check return code in BS2000/OSD DCAM macros manual for
details.
|
NAF SP-SERV: ENACO FOR DCAM FAILED, R15:
xxxxxxxx
| Expl. |
The definition of a DCAM contingency process failed with
return code xxxxxxxx.
|
| Actn. |
Check ENACO return code in BS2000/OSD macro
manual for details.
|
NAF SP-SERV: LOST CONNECTION CALLED FOR
pppppppp, REASON (R6)
xxxxxxx
| Expl. |
The connection to a DCAM printer was lost. Reason code
xxxxxxxx was returned.
|
| Actn. |
None. |
NAF SP-SERV: DCAM TERMINATION CALLED FOR
nnnnnnnn, REASON (R4)
xxxxxxxx
| Expl. |
The DCAM application
nnnnnnnn was closed. Reason code
xxxxxxxx was returned.
|
| Actn. |
None. |
NAF SP-SERV: ENAIE FAILED, R15: xxxxxxxx
EVENT ID nnnnnnnn
| Expl. |
The definition of event item
nnnnnnnn failed with return code
xxxxxxxx.
|
| Actn. |
Check ENAIE return code in BS2000/OSD macro
manual for details.
|
NAF SP-SERV: TASK TERMINATION. SOLSIG ERROR, R15:
xxxxxxxx
| Expl. |
The printer task was terminated because the execution of a
SOLSIG macro failed with return code
xxxxxxxx.
|
| Actn. |
Check SOLSIG return code in BS2000/OSD macro
manual for details.
|
NAF SP-SERV INITIALIZATION FOR NAF SPOOL SERVER FAILED
| Expl. |
Common error message if start of print server failed. |
| Actn. |
None. |
SERVEND Program Error
Messages
MACRO POSSIG ERROR: xxxxxxxx
| Expl. |
The execution of a POSSIG macro failed with
return code xxxxxxxx.
|
| Actn. |
Check POSSIG return code in BS2000/OSD macro
manual for details.
|
MACRO ENAEI ERROR: xxxxxxxx
| Expl. |
The execution of an ENAEI macro failed with
return code xxxxxxxx.
|
| Actn. |
Check ENAIE return code in BS2000/OSD macro
manual for details.
|
