Authorized Services Manager Messages
This section lists the messages that may be issued by the Natural
Authorized Services Manager (ASM). Unlike Natural system messages, the
explanatory long texts to these messages and codes are only available in this
document, not online.
ASM0001 - Subsystem id invalid
Expl. |
A subsystem ID was specified that is longer than 4 characters.
|
Actn. |
Specify a subsystem ID of 1 to 4 characters. |
ASM0002 - No group name: Sysplex purge propagation disabled
Expl. |
The second parameter was not specified. The ASM will not
communicate with other ASMs in a Parallel Sysplex.
|
Actn. |
None. |
ASM0003 - Unexpected return code from IEANTRT: rc
Expl. |
The Name/Token Service returned return code
rc.
|
Actn. |
See the current IBM MVS Programming: Authorized
Assembler Services Reference manual for information about the
return code from the IEANTRT request.
|
ASM0004 - LX table could not be obtained. Reason: reasoncode
Expl. |
A STORAGE OBTAIN request failed with
reasoncode.
|
Actn. |
Increase virtual storage available to the ASM. (REGION option
of the JCL EXEC statement.)
|
ASM0005 - Authorized Services Manager Version
vrs is active
Where vrs stands for version, release,
system maintenance level.
Expl. |
The ASM initialized successfully and is ready for work.
|
Actn. |
None. |
ASM0006 - Other than MODIFY or STOP command received
Expl. |
The ASM received a CIBVERB other than MODIFY or STOP. |
Actn. |
Contact Software AG. |
ASM0007 - Trace activated
Expl. |
In response to the TRSTART operator command, the internal
trace facility is started.
|
Actn. |
None. |
ASM0008 - Trace stopped
Expl. |
In response to the TRSTOP operator command, the internal trace
facility is stopped.
|
Actn. |
None. |
ASM0009 - Invalid command: command
Expl. |
An invalid operator command was issued to the ASM. |
Actn. |
Check for typing error and correct. |
ASM0010 - Bad return code from SNAP routine: rc
Expl. |
A SNAP dump could not be taken.
The return codes are as follows:
|
20 |
A STORAGE OBTAIN request failed. |
24 |
SYSUDUMP could not be opened. |
Actn. |
For return code 20: |
Increase virtual storage available to the ASM. (REGION option
of the JCL EXEC statement.)
|
For return code 24: |
Ensure that the ASM job or started task includes a DD statement
for SYSUDUMP.
|
ASM0011 - Subtask terminated: taskname rc
Expl. |
The subtask indicated by taskname
has terminated. If the return code is not zero, it is indicated as
rc.
|
Actn. |
If a nonzero rc is reported,
contact Software AG.
|
ASM0012 - Subtask termination in progress
Expl. |
In response to the TERM operator command, the ASM has started
to terminate its subtasks.
|
Actn. |
None. |
ASM0013 - Coupling Facility will not be used for SIP
Expl. |
No CF structure name was specified in the third parameter.
|
Actn. |
None. |
ASM0014 - Invalid SIP CF structure name
Expl. |
A structure name of more than 16 characters was specified.
|
Actn. |
Specify a structure name of 16 characters or less. |
ASM0015 - Invalid number of SIP slots specified
Expl. |
The fourth parameter is not a number. |
Actn. |
Correct typing error. |
ASM0017 - Connected to SIP CF Structure with nnnn slots
Expl. |
The structure was already allocated and contains
nnnn slots.
|
Actn. |
None. |
ASM0018 - SIP CF Structure initialized with nnnn slots
Expl. |
The structure was not yet allocated and initialized by the ASM.
The number of slots is either the number specified in the fourth parameter or
the number of slots the ASM was able to create, whichever is less.
|
Actn. |
None. |
ASM0019 - Number of SIP slots not specified: SIP service is not
available
Expl. |
The number of slots was not specified as fourth parameter, and a
CF structure was not specified as third parameter. The Session Information Pool
Service (SIP) is not available.
|
Actn. |
None. |
ASM0020 - Invalid SIP slots size specified
Expl. |
The fifth parameter is either not numeric, or an invalid
number.
|
Actn. |
Specify 256, 512, 1024, 2048, or 4096. |
ASM0021 - Unexpected return code from IEANTCR: rc
Expl. |
The Name/Token Service returned return code
rc.
|
Actn. |
See the current IBM MVS Programming: Authorized
Assembler Services Reference manual for information about the
return code from the IEANTCR request.
|
ASM0045 - Applied Zaps:
Expl. |
When Zaps are applied to the ASM, it issues this message,
followed by a list of applied zaps.
|
Actn. |
None. |
ASM0047 - Operator command: command
Expl. |
The ASM echoes operator commands to JESMSGLG. |
Actn. |
None. |
ASM0058 - ASM already active in subsid: Job jobname ASID asid
Expl. |
The ASM determined that in the Natural subsystem specified in the
first parameter, subsid, another ASM is already active. The other ASM is
running in job or started task named jobname, with
address space identifier asid.
|
Actn. |
Start only one ASM per Natural subsystem per MVS image.
|
ASM0066 - REBUILD Start: CF structure temporarily unavailable
Expl. |
Operator command SETXCF START,REBUILD…was issued for the Coupling
Facility Structure that holds the Session Information Pool (SIP) data. SIP
operation is quiesced until the Rebuild operation is complete.
|
Actn. |
None. |
ASM0067 - REBUILD End: CF structure available again
Expl. |
Operator command SETXCF START,REBUILD…was issued for the Coupling
Facility Structure that holds the Session Information Pool (SIP) data. Rebuild
is now complete and the SIP service resumes normal operation.
|
Actn. |
None. |
ASM0068 - Invalid parameter
parameter
Expl. |
An invalid parameter was supplied in the JCL EXEC statement of
the ASM job or Started Task.
|
Actn. |
Correct JCL. |
ASM0073: module
version date
time
Expl. |
In response to operator command VLIST, a list of linked modules
is displayed with version and assembly date and time.
|
Actn. |
None. |
ASM0119 - Authorized Services Manager Server settings in
effect:
Expl. |
This message is issued at start-up of the Authorized Services
Manager. It is followed by several ASM0119 messages of varying contents,
summarizing parameters in effect for this run.
|
Actn. |
None. |