MashZone NextGen 10.2 | Appendix | Legacy Presto components | Mashables and Mashups | Views for Mashups and Mashables | Built-in MashZone NextGen Views | Advanced Configuration Properties | Advanced
 
Advanced
Palette Colors
Allows you to pick multiple colors to use as fill colors for plots (columns, bars, wedges, lines, areas and other graphic shapes) in some charts.
To add a color:
1. Click the color swatch.
2. Find a color in the window that opens and close the window when you have the right color.
3. Click Add Color. This adds a swatch to the list along with the hexadecimal value for this color.
Colors get added in order and correspond to specific series of data. For pie or doughnut charts, the list of colors simply repeats through the wedges.
Click a color in the list to delete it.
Palette
Pre-defined color palettes for chart backgrounds and labels.
Color Range Palette
For dial gauges, determines the list of colors used for each range within the dial.
Animation
Determines whether the chart rendering is animated (true by default) or not. Nonanimated rendering may pause until the entire chart can be displayed.
Smart Line Color
For pie and doughnut charts, the color of lines connecting labels to a wedge.
Smart Line Thickness
For pie and doughnut charts, the thickness in pixels of lines connecting labels to a wedge.
Smart Line Transparency
For pie and doughnut charts, the opacity, from 0-100, as a percentage of lines connecting labels to a wedge. Zero is fully transparent and 100 is fully opaque. If not set, this is fully opaque.
Smart Line Slanted
For pie and doughnut charts, determines how the lines connecting labels to wedges are bent. Slanted is the default which allows different angles. Slanted uses 90 degree bends only.
Round Radius
Sets the radius to use for rounded corners.
Is Sliced
Determines whether funnel slices are sliced-out or not (default).
Is Hollow
Determines whether funnel slices are hollow or filled (default).
Stream Lined Data
Whether to present the data as streamlined data or as section data. Section by default.
Use Same Slant Angle
Assigns identical slant angles to all slices.
Show Plot Border
Whether to show a border around two-dimensional funnel charts.
Plot Border Thickness
Border thickness in pixels for two-dimensional funnel charts.
High Color
The color to use for the high value column in Sparkline Column charts.
Low Color
The color to use for the low value column in Sparkline Column charts.
Win Color
The color to use for win columns in Win/Loss Sparkline charts.
Loss Color
The color to use for loss columns in Win/Loss Sparkline charts.
Radar Radius
Sets a best-fit radius for radar chart plots. If this is not set, the best fit is automatically calculated.
Draw Anchors
Show anchors for data points in a radar chart plot.
Anchor Sides
Sets the number of sides, from 3 up to 20, to use in anchors.
Anchor Radius
Sets the radius, in pixels, for anchors.
Anchor Border Color
The color to use in the border of anchors.
Anchor Border Thickness
The thickness, in pixels, of anchor borders.
Anchor Background Color
The background (or fill) color or anchors.
Anchor Transparency
How opaque anchors are as a percentage (0-100%). Zero is fully transparent and 100 is fully opaque.
Anchor Background Transparency
How opaque anchor backgrounds are as a percentage (0-100%). Zero is fully transparent and 100 is fully opaque.
Interactive Legend
Whether users can click in the legend to visually hide specific series. This is true by default.
Minimize Wrapping in Legend
Whether to minimize text wrapping in the legend. This is true by default.
Legend Column Numbers
Sets the number of columns to show with labels in the legend.
Data Line Color
The color to use in plot lines for data.
Data Line Thickness
The thickness, in pixels, of plot lines for data.
Data Line Transparency
How opaque plot lines for data are as a percentage (0-100%). Zero is fully transparent and 100 is fully opaque.
Data Line Dashed
Whether plot lines for data should be dashed. Defaults to false.
Data Line Dash Length
The length, in pixels of dashes in a plot line when dashing is enabled.
Data Line Dash Gap
The distance, in pixels, between dashes in a plot line when dashing is enabled.
Show Radar Border
Whether to show the outer border in radar charts.
Radar Border Color
The color to use for the outer border in radar charts.
Radar Border Thickness
The thickness, in pixels, for the outer border in radar charts.
Radar Border Transparency
How opaque the outer border for a radar chart should be as a percentage (0-100%). Zero is fully transparent and 100 is fully opaque.
Radar Fill Color
The fill color for radar plots.
Radar Fill Transparency
How opaque the fill for radar plots should be as a percentage (0-100%). Zero is fully transparent and 100 is fully opaque.
Radar Spike Color
The color to use for vertices (lines that radiate from the center) in radar plots.
Radar Spike Thickness
The thickness, in pixels, of vertices (lines that radiate from the center) in radar plots.
Radar Spike Transparency
How opaque vertices (lines that radiate from the center) in radar plots should be as a percentage (0-100%). Zero is fully transparent and 100 is fully opaque.
Reversal Value
The specific value that determines when a horizontal shift should occur to plot the next point.
Reversal Percentage
The percentage of change that determines when a horizontal shift should occur to plot the next point.
Maximum Horizontal Shift Percent
Sets the maximum horizontal shift as a percentage.
Rally Color
The color to use for plot lines that indicate a rally.
Rally Thickness
The thickness, in pixels, for rally lines in the chart.
Rally Transparency
How opaque rally lines should be as a percentage (0-100%). Zero is fully transparent and 100 is fully opaque.
Rally Dashed
Whether rally lines should be dashed.
Rally Dash Length
The length, in pixels, for rally line dashes when dashing is enabled.
Rally Dash Gap
The distance, in pixels, between dashes in rally lines when dashing is enabled.
Decline Color
The color to use for plot lines that indicate a decline.
Decline Thickness
The thickness, in pixels, for decline lines in the chart.
Decline Transparency
How opaque decline lines should be as a percentage (0-100%). Zero is fully transparent and 100 is fully opaque.
Decline Dashed
Whether decline lines should be dashed.
Decline Dash Length
The length, in pixels, for decline line dashes when dashing is enabled.
Decline Dash Gap
The distance, in pixels, between dashes in decline lines when dashing is enabled.
Plot Price As
What type of plot to use for the price chart:
*Default
*Candlestick
*Line
*Bar
Plot Closing Price
Whether the closing price is included in the price chart.
Show Volume Chart
Whether to show the volume chart.
Volume Height Percent
The percentage of the overall chart, from 20% to 80%, that the volume chart should occupy. See also Plot Space Percent.
Plot Space Percent
The percentage of the overall chart that the price chart should occupy. See also Volume Height Percent.
Bear Fill Color
The fill color for candles or bars with a bear trend.
Bear Border Color
The border color for candles, wicks (lines) or bars with a bear trend.
Bull Fill Color
The fill color for candles or bars with a bull trend.
Bull Border Color
The border color for candles, wicks (lines) or bars with a bull trend.
Rollover Band Color
The color of the rollover band.
Rollover Band Transparency
How opaque the rollover band should be as a percentage (0-100%). Zero is fully transparent and 100 is fully opaque.
Show Volume Chart Plot Borders
Whether to show plot borders in the Volume chart.
Volume Chart Plot Border Color
The border color to use for plots in the Volume chart.
Volume Chart Plot Border Thickness
The border thickness, in pixels, for plots in the Volume chart.
Volume Chart Plot Border Transparency
How opaque the plot borders in the Volume chart should be as a percentage (0-100%). Zero is fully transparent and 100 is fully opaque.
Plot Line Transparency
How opaque the plot lines should be as a percentage (0-100%). Zero is fully transparent and 100 is fully opaque.
Plot Line Thickness
The thickness, in pixels, for plot lines.
Plot Line Dash Length
The length, in pixels, for dashes in plot lines.
Plot Line Dash Gap
The distance, in pixels, between dashes in plot lines.
Maximum Column Width
Sets the maximum width for columns.
Use 3D Lighting
Turns on advanced gradients and shadows in 3D charts.
Primary Y Axis Name Width
Sets a maximum width for the primary Y axis label.
Secondary Y Axis Name Width
Sets a maximum width for the secondary Y axis label.
Place Values Inside
Whether data values are placed inside columns.
Show Secondary Limits
Whether to show limits for the secondary Y axis.
Show Divisional Line Secondary Value
Whether to show the secondary axis value for divisional lines in the canvas.
Show Cumulative Line
Whether to plot lines as cumulative values for the series.
Show Line Values
Whether to display data point values on lines.
Plot Border Color
The color to use for borders for plots in the chart.
Plot Border Transparency
How opaque the plot borders should be as a percentage (0-100%). Zero is fully transparent and 100 is fully opaque.
Plot Border Dashed
Whether plot borders should be dashed.
Plot Border Dash Length
The length of dashes, in pixels, for the plot border when dashing is enabled.
Plot Border Dash Gap
The distance, in pixels, between dashes in plot borders when dashing is enabled.
Plot Fill Angle
Sets the angle (0 to 360) for plot fills that use gradients.
Plot Fill Transparency
How opaque the plot fill should be as a percentage (0-100%). Zero is fully transparent and 100 is fully opaque.
Plot Gradient Color
A global color to use in gradient fills for plots in the chart.
Plot Fill Ratio
Sets the fill ratio for gradients in plots for the chart.
Use Round Edges
Sets rounded corners for columns and fills columns with a glass effect gradient.
Show Sum
Show the sum of all segments in a stacked column layout.
Use Percent Distribution
Show data values as percentages.
Show X Axis Percent Values
Show values as percentages along the X axis.
Overlap Columns
Overlap columns in 3D layouts for a richer look.
Gantt Pane Duration Unit
The time unit that is used in a Gantt chart timeline. This defaults to Month.
Gantt Pane Duration
The number of time units to include in a Gantt chart timeline.
Slack Fill Color
If you include percentage of completion statistics for a Gantt chart, this is the color used to fill the bars for the uncompleted portions of tasks.
Show Slack as Fill
Determines whether uncompleted portions of tasks are shown with fill color or not. This defaults to true. This is only applicable if you include percentage of completion statistics for the Gantt chart.
Show Percent Label
Determines whether a label with the percentage of completion is shown for tasks in a Gantt chart. Defaults to No. This is only applicable if you include percentage of completion statistics for the Gantt chart.
Show Task Start Date
Determines whether a label with the start date is shown for tasks in a Gantt chart. Defaults to No.
Show Task End Date
Determines whether a label with the end date is shown for tasks in a Gantt chart. Defaults to No.

Copyright © 2013-2018 | Software AG, Darmstadt, Germany and/or Software AG USA, Inc., Reston, VA, USA, and/or its subsidiaries and/or its affiliates and/or their licensors.
Innovation Release