The Software AG internal transport subsystem Messages and Codes documentation provides information for each warning and error message that you can encounter using the internal transport subsystem of Software AG products.
This documentation is organized as follows:
| Warnings | Provides the message ID, message text, and a brief explanation for each warning message. |
| Errors | Provides the message ID, message text, and a brief explanation for each error message. |
| Generic TCP/IP Messages | Lists the message ID and message text for each generic TCP/IP error. For complete information on the TCP/IP error conditions, refer to your TCP/IP documentation. |
Note:
The internal component API returns warnings as positive values and
errors as negative values.
XTS0000W | XTS0001W | XTS0003W | XTS0004W | XTS0005W | XTS0006W | XTS0007W | XTS0008W | XTS0009W | XTS0010W | XTS0011W | XTS0012W | XTS0013W | XTS0014W | XTS0015W| XTS0000W | XTS Success |
| Explanation |
The transport subsystem processing completed successfully. |
| XTS0001W | XTS No LISTEN has been issued |
| Explanation |
A server has only XTSconnect entries and no XTSlisten. It is possible for a server to connect only to a proxy, and the warning helps applications determine if XTSlisten is missing. |
| XTS0003W | XTS Load message file failed |
| Explanation |
The transport subsystem failed to load the XTS.MSG file. This file contains text for the error messages; there is an internal table also, so XTS.MSG is not mandatory. |
| XTS0004W | XTS Client already registered |
| Explanation |
Multiple |
| XTS0005W | XTS More data |
| Explanation |
The receive buffer defined by a transport subsystem send and wait call is not big enough to get all data received by the transport subsystem. A subsequent call has to be made to receive all data. |
| XTS0006W | XTS No SSL random file warning |
| Explanation |
There is no random file defined for a transport subsystem/Secure Sockets Layer (SSL) application; a random file usage by SSL is highly recommended. |
| XTS0007W | XTS Notify connect |
| Explanation |
This is a receive callback notification for an incoming connection. |
| XTS0008W | XTS Notify disconnect |
| Explanation |
This is a receive callback notification for a disconnection. |
| XTS0009W | XTS Notify broadcast |
| Explanation |
This is a receive callback notification for a broadcast attempt. |
| XTS0010W | XTS Notify unsupported |
| Explanation |
This is a receive callback notification when protocols set by XTSlisten are not supported. |
| XTS0011W | XTS Notify message reference dead |
| Explanation |
This is a receive callback notification indicating the active message references are deleted when a client disconnects. |
| XTS0012W | XTS Notify outbound connect |
| Explanation |
This is a receive callback notification for an outbound connection. |
| XTS0013W | XTS Notify listen failure |
| Explanation |
This is a notification to the callback routine submitted by XtsRegisterByTargetName or XtsRegisterByTargetId indicating a failure of an XTSlisten URL. |
| XTS0014W | XTS Notify connect failure |
| Explanation |
This is a notification to the callback routine submitted by XtsRegisterByTargetName or XtsRegisterByTargetId indicating a failure of an XTSconnect URL. |
| XTS0015W | XTS Notify end broadcast |
| Explanation |
This is a notification to the callback routine submitted by XtsRegisterByTargetName or XtsRegisterByTargetId indicating an end broadcast message was received from another node. |
XTS0050E | XTS0051E | XTS0052E | XTS0053E | XTS0054E | XTS0055E | XTS0056E | XTS0057E | XTS0058E | XTS0059E | XTS0060E | XTS0061E | XTS0062E | XTS0063E | XTS0064E | XTS0065E | XTS0066E | XTS0069E | XTS0070E | XTS0071E | XTS0072E | XTS0073E | XTS0074E | XTS0075E | XTS0077E | XTS0078E | XTS0079E | XTS0082E | XTS0083E | XTS0084E | XTS0085E | XTS0086E | XTS0087E | XTS0088E | XTS0089E | XTS0090E | XTS0094E | XTS0095E | XTS0096E | XTS0097E | XTS0098E | XTS0100E | XTS0101E | XTS0102E | XTS0103E | XTS0104E | XTS0105E | XTS0106E | XTS0107E | XTS0108E | XTS0109E | XTS0110E | XTS0111E | XTS0112E | XTS0113E | XTS0114E | XTS0115E | XTS0116E | XTS0117E | XTS0118E | XTS0119E | XTS0120E | XTS0121E | XTS0122E | XTS0123E | XTS0124E | XTS0126E | XTS0127E | XTS0128E | XTS0129E | XTS0130E | XTS0131E | XTS0132E | XTS0150E | XTS0151E | XTS0152E | XTS0153E | XTS0154E | XTS0155E | XTS0156E | XTS0157E | XTS0158E | XTS0159E | XTS0163E | XTS0167E | XTS0168E | XTS0169E | XTS0170E | XTS0171E | XTS0172E | XTS0173E | XTS0174E | XTS0200E | XTS0201E | XTS0203E | XTS0204E | XTS0205E | XTS0206E | XTS0207E | XTS0208E | XTS0209E | XTS0210E | XTS0211E | XTS0212E | XTS0213E | XTS0214E | XTS0215E | XTS0216E | XTS0217E | XTS0218E | XTS0219E | XTS0220E | XTS0221E | XTS0222E | XTS0223E | XTS0224E | XTS0225E | XTS0226E | XTS0227E | XTS0228E | XTS0229E | XTS0230E | XTS0231E | XTS1000E| XTS0050E | XTS Semaphore Error |
| Explanation |
A failure to create a semaphore occurred. Contact Software AG customer support. |
| XTS0051E | XTS Memory Allocation Error |
| Explanation |
A failure to allocate memory occurred. Contact Software AG customer support. |
| XTS0052E | XTS Server already registered |
| Explanation |
The transport subsystem server is already registered. |
| XTS0053E | XTS Incorrect URL |
| Explanation |
A URL with a syntax error was encountered. Check the Directory Server repositories. |
| XTS0054E | XTS Failure Loading Protocol Handler |
| Explanation |
A failure to load protocol handlers (for example, Xtstcp.lib) occurred. It was probably caused by a configuration problem. Contact Software AG customer support. |
| XTS0055E | XTS Protocol Init failed |
| Explanation |
A protocol initialization failure occurred. Contact Software AG customer support. |
| XTS0056E | XTS Invalid protocol type |
| Explanation |
The specified protocol is not supported by the transport subsystem. This is possibly and error in URL syntax. |
| XTS0057E | XTS Listen Failed |
| Explanation |
A listen failed. Check the log file for protocol-specific errors. This is caused mostly by trying to listen on a port taken by another server. |
| XTS0058E | XTS Accept Failed |
| Explanation |
The accept failed. Check the log file for protocol-specific errors. |
| XTS0059E | XTS Connect Failed |
| Explanation |
The connect failed. Check the log file for protocol-specific errors. |
| XTS0060E | XTS No directory information |
| Explanation |
No XTSaccess information is provided for the server to which the application wants to connect. Please add a target definition through the Directory Server. |
| XTS0061E | XTS Failure to create a thread |
| Explanation |
A failure to create a thread occurred. Contact Software AG customer support |
| XTS0062E | XTS Timeout error |
| Explanation |
A failure to connect or send data in the time set by the user occurred. To complete the connect or send, repeat the call or increase the timeout value. |
| XTS0063E | XTS Send Failed |
| Explanation |
A completion code is returned to the send callback routine when send fails. Check the log file for the protocol-specific error code. |
| XTS0064E | XTS Invalid reference |
| Explanation |
An invalid message reference was passed by the user. |
| XTS0065E | XTS Send incomplete |
| Explanation |
A send was interrupted by a client disconnection. |
| XTS0066E | XTS No such server |
| Explanation |
A nonexistent server name was passed by the user. It applies to the transport subsystem statistics and dumps calls. |
| XTS0069E | XTS Resolve Target failed |
| Explanation |
The client failed to send a handshake message to the server; Error caused by the server going down or a protocol send error. |
| XTS0070E | XTS Resolve Target Reply failed |
| Explanation |
The server failed to reply to the client during handshaking. This error is caused by the client going down or by a protocol send error. |
| XTS0071E | XTS Target cannot be resolved |
| Explanation |
The client failed to resolve the target name. This error is caused by different names used by the server and the client but with the same address. |
| XTS0072E | XTS Not initialized |
| Explanation |
The transport subsystem call was submitted before the transport subsystem was initialized. Errors were returned by XtsShutdown, XtsSendMessageByRT, and the transport subsystem statistics call. |
| XTS0073E | XTS Bind Client failed |
| Explanation |
The client bind failed because of a protocol send error or because the server went down. |
| XTS0074E | XTS Too many user threads |
| Explanation |
The number of user threads in existence reached the maximum (64). Stop creating new user threads or reduce their time to live (timeout). |
| XTS0075E | XTS Created thread failed |
| Explanation |
The transport subsystem failed to create a new user thread. This is an SMP error, possibly because of the limitations of the number of threads that a system can support. Contact Software AG customer support. |
| XTS0077E | XTS Conversion failed |
| Explanation |
The conversion between wide character and MBNS failed. Contact Software AG customer support. |
| XTS0078E | XTS No Target Name |
| Explanation |
The target name is a zero pointer. Pass a valid string. |
| XTS0079E | XTS No Client Name |
| Explanation |
The client name is a zero pointer. Pass a valid string. |
| XTS0082E | XTS Zero Length not accepted |
| Explanation |
The length of the data to be sent is zero, Make the length a positive number. |
| XTS0083E | XTS Target ID Out of Range |
| Explanation |
The target ID value is bigger than "2113929215". |
| XTS0084E | XTS Channel Inactive |
| Explanation |
The server-client connection was no longer active when XtsSendByRt or XtsBindClient were called. This error is generated by a client going down during the call. |
| XTS0085E | XTS Disconnect message |
| Explanation |
A client or server disconnection was detected during a transport subsystem call. |
| XTS0086E | XTS Hash table error |
| Explanation |
An internal transport subsystem hash table error occurred. Contact Software AG customer support. |
| XTS0087E | XTS Thread key error |
| Explanation |
An allocate/delete thread memory failure occurred. Contact Software AG customer support. |
| XTS0088E | XTS No CONNECT or LISTEN has been issued |
| Explanation |
A server registration failed to submit at least one listen or connect. Check the XTSlisten or XTSconnect URL parameters. |
| XTS0089E | XTS Protocol not supported |
| Explanation |
An attempt was made to use XtsBindClient over the RAW or XTSDS protocol. This feature is not supported. |
| XTS0090E | XTS Single Thread not supported |
| Explanation |
This error code is returned when the transport subsystem call does
not support the single thread feature. Examples include
|
| XTS0094E | XTS Zero pointer |
| Explanation |
A zero pointer was passed by the user. This is an invalid value. |
| XTS0095E | XTS Hash table full |
| Explanation |
An internal transport subsystem hash table error occurred. Contact Software AG customer support. |
| XTS0096E | XTS Send User Exit failed |
| Explanation |
The user exit send routine failed. Check the user exit code. |
| XTS0097E | XTS Recv User Exit failed |
| Explanation |
The user exit receive routine failed. Check the user exit code. |
| XTS0098E | XTS Load User Exit failed |
| Explanation |
The transport subsystem failed to load the user exit library. Check the environment or the user exit routine names. |
| XTS0100E | XTS Shutdown in process |
| Explanation |
This error code is returned when the transport subsystem is in shutdown mode (because XtsShutdown was called by another thread). |
| XTS0101E | XTS Route Timeout |
| Explanation |
The proxy cannot deliver the message because the route timeout was insufficient. Change the route timeout. |
| XTS0102E | XTS Route Table overflow |
| Explanation |
The proxy cannot deliver the message because of a route table overflow. Repeat the transport subsystem call. |
| XTS0103E | XTS Route TTL expired |
| Explanation |
The proxy cannot deliver the message because the route time to live was insufficient. Change the time to live time. |
| XTS0104E | XTS Route failed |
| Explanation |
The proxy cannot deliver the message because of a route failure. Repeat the transport subsystem call. |
| XTS0105E | XTS Null parameter |
| Explanation |
A null parameter is encountered when a notify callback routine registration is called. |
| XTS0106E | XTS Connection Rejected |
| Explanation |
The connection was rejected by the notify callback routine. |
| XTS0107E | XTS Replica redirected |
| Explanation |
The connection was redirected by the callback routine. |
| XTS0108E | XTS timeout - connect in progress |
| Explanation |
A timeout error occurred, but connection is in progress. Submit the call again or increase the timeout value. |
| XTS0109E | XTS invalid session |
| Explanation |
An invalid session handle was used by the transport subsystem session calls. |
| XTS0110E | XTS invalid key |
| Explanation |
An invalid session handle was used by the transport subsystem session calls. |
| XTS0111E | XTS Count converters failed |
| Explanation |
The count of available converter names failed. |
| XTS0112E | XTS Convert enum failed |
| Explanation |
The enumeration of text converter names failed. |
| XTS0113E | XTS Buffer too small |
| Explanation |
The text conversion buffer is not big enough.. |
| XTS0114E | XTS No more ports available |
| Explanation |
No replicated server ports are available . |
| XTS0115E | XTS Text converter library load failed |
| Explanation |
The load of the transport subsystem converter ending failed. |
| XTS0116E | XTS Text converter resolve failed |
| Explanation |
The text converter interface function could not be resolved. |
| XTS0117E | XTS Name to EDDkey map failed |
| Explanation |
The ICU converter name to Software AG ECS EDD key conversion failed.. |
| XTS0118E | XTS XDS library loading failed |
| Explanation |
The XDS library used by ADVDIR could not be loaded. |
| XTS0119E | XTS DS access time out error |
| Explanation |
A timeout occurred accessing the Directory Server (the default timeout is one minute). |
| XTS0120E | XTS Failed to set ECS environment |
| Explanation |
A failure occurred when setting the ECS environment. |
| XTS0121E | XTS Set UDP Port failed |
| Explanation |
The UDP port selected by user cannot be used (because it is used by another application). |
| XTS0122E | XTS Sync and async send in raw mode not allowed |
| Explanation |
Using synchronous and asynchronous calls on the same channel is not allowed. |
| XTS0123E | XTS Unknown received buffer |
| Explanation |
The transport subsystem received an unknown buffer from an application. |
| XTS0124E | XTS Function retired |
| Explanation |
The transport subsystem function is not supported any longer. |
| XTS0126E | XTS invalid duplicate server |
| Explanation |
This error is generated when the same server is registered again with a different protocol than the one used when it was first registered. |
| XTS0127E | XTS Fatal error |
| Explanation |
An internal error occurred, indicating a severe transport subsystem code problem. Contact Software AG customer support. |
| XTS0128E | XTS Load library failed |
| Explanation |
The transport subsystem failed to load a library (the log file indicates which one). |
| XTS0129E | XTS Key not found |
| Explanation |
The key used to retrieve transport subsystem parameters does not exist. |
| XTS0130E | XTS Xts.Config Key not found |
| Explanation |
The key used by the user to retrieve transport subsystem parameters from xts.config file does not exist. |
| XTS0131E | XTS No directory information for XTS profile |
| Explanation |
The profile is not defined in the Directory Server. |
| XTS0132E | XTS Load function failed |
| Explanation |
A failure occurred loading a function (the name of the function and the name of the library are in the log file). |
| XTS0150E | XTS SSL init failed |
| Explanation |
The transport subsystem failed to initialize the Secure Sockets Layer (SSL) library. Check the log file for the SSL error messages. |
| XTS0151E | XTS SSL Verify CA locations failed |
| Explanation |
The Secure Sockets Layer (SSL) failed to load the CA certificates. Probable causes include an invalid path specification or nonexistent CA certificates. |
| XTS0152E | XTS SSL Certificate file not specified |
| Explanation |
No Secure Sockets Layer (SSL) certificate was specified. |
| XTS0153E | XTS SSL Invalid Certificate |
| Explanation |
The URL-specified Secure Sockets Layer (SSL) certificate has an invalid format. |
| XTS0154E | XTS SSL Invalid Key File |
| Explanation |
The URL-specified Secure Sockets Layer (SSL) key file has an invalid format. |
| XTS0155E | XTS SSL Invalid Key |
| Explanation |
The Secure Sockets Layer (SSL) key specified by the user is invalid. |
| XTS0156E | XTS SSL Connect failed |
| Explanation |
A Secure Sockets Layer (SSL) connect failed (caused by an SSL handshaking error). Check the log file for the Secure Sockets Layer (SSL) error messages. |
| XTS0157E | XTS SSL Accept failed |
| Explanation |
A Secure Sockets Layer (SSL) accept failed (caused by an SSL handshaking error). Check the log file for the SSL error messages. |
| XTS0158E | XTS SSL Read failed |
| Explanation |
A Secure Sockets Layer (SSL) read failed. Check the log file for the SSL error messages. |
| XTS0159E | XTS SSL Write failed |
| Explanation |
A Secure Sockets Layer (SSL) write failed. Check the log file for the SSL error messages. |
| XTS0163E | XTS SSL Failed loading library |
| Explanation |
A failure to load the Secure Sockets Layer (SSL) library occurred. Check the environment. |
| XTS0167E | XTS SSL Illegal host name |
| Explanation |
The peer certificate subject name and host name are different, indicating an illegal connection. |
| XTS0168E | XTS SSL No local certificate |
| Explanation |
There is no local Secure Sockets Layer (SSL) certificate. |
| XTS0169E | XTS SSL No remote certificate |
| Explanation |
There is no local Secure Sockets Layer (SSL) certificate. |
| XTS0170E | XTS SSL insufficient user memory |
| Explanation |
There is insufficient user memory for returning the requested data. |
| XTS0171E | XTS SSL certificate rejected |
| Explanation |
The certificate was rejected during verification. |
| XTS0172E | XTS SSL zero length message return |
| Explanation |
The Secure Sockets Layer (SSL) write or read routines returned an invalid zero value. Contact Software AG customer support. |
| XTS0173E | XTS SSL want read error |
| Explanation |
The Secure Sockets Layer (SSL) write routine returned want read error code. Contact Software AG customer support. This is a transport subsystem internal sequence error. |
| XTS0174E | XTS SSL want write error |
| Explanation |
The Secure Sockets Layer (SSL) read routine returned want write error code. Contact Software AG customer support. This is a transport subsystem internal sequence error. |
| XTS0200E | DS Open File failed |
| Explanation |
A failure to open a file occurred. Check if the file exists and that the path is correct. |
| XTS0201E | DS Incomplete Entry |
| Explanation |
A URL syntax error occurred. Check the log file for detailed information. |
| XTS0203E | DS Service not provided |
| Explanation |
An invalid Directory Service selection was made. |
| XTS0204E | DS Null parameter |
| Explanation |
A Directory Service call was encountered with a null parameter. |
| XTS0205E | DS Incomplete Entry |
| Explanation |
An attempt to add an incomplete URL record was made. |
| XTS0206E | DS Topic Not Defined |
| Explanation |
The user tried to use a qualifier unknown to the Directory Server. |
| XTS0207E | DS Unknown request |
| Explanation |
An unknown XTSDS request was encountered. Check the syntax of the Directory Server call. |
| XTS0208E | DS No Entries |
| Explanation |
The Directory Server or configuration file contains no entries for the specified target. |
| XTS0209E | DS Delete Failed |
| Explanation |
A Directory Service delete call failed. Check the log file for detailed information. |
| XTS0210E | DS Connection Failed |
| Explanation |
Connection to the Directory Server failed. |
| XTS0211E | DS Bind Failed |
| Explanation |
Deprecated message. |
| XTS0212E | DS Search Failed |
| Explanation |
Retrieve URL command failed. |
| XTS0213E | DS Add Failed |
| Explanation |
Addition of a new URL failed. |
| XTS0214E | DS Already Exists |
| Explanation |
An attempt was made to add a record that already exists. |
| XTS0215E | DS Failure Loading Service Handler |
| Explanation |
A failure occurred loading a directory service. Check the environment. Contact Software AG customer support. |
| XTS0216E | DS Wrong directory parameter |
| Explanation |
Unknown directory parameter. |
| XTS0217E | DS not Initialized |
| Explanation |
Directory Server was not initialized before usage. |
| XTS0218E | DS Invalid target Name |
| Explanation |
The target name contains one of the following characters: "#", ".", "[", "]", "=", "\", "\", or "*". The target name is invalid. |
| XTS0219E | DS Incomplete request |
| Explanation |
An incomplete XTSDS request was caused by a zero value of the target, qualifier, or user data. |
| XTS0220E | DS No URL entries |
| Explanation |
The XTSDS server does not have any URL to return for the retrieve call. |
| XTS0221E | DS XDS error |
| Explanation |
An XDS processing error occurred.. |
| XTS0222E | DS Rollback is not implemented |
| Explanation |
No Directory Service rollback was performed.. |
| XTS0223E | DS OVO error |
| Explanation |
An OVO error occurred during Directory Service processing. |
| XTS0224E | DS One time set violation |
| Explanation |
A one-time setting function was called multiple times. A programs encoding mode cannot change once it is set. |
| XTS0225E | DS Encoding conflict |
| Explanation |
The INIDIR file encoding conflicts with programs encoding. |
| XTS0226E | DS Create file failed |
| Explanation |
The file creation failed during Directory Service processing.. |
| XTS0227E | DS IO file failed |
| Explanation |
A file I/O error occurred during Directory Service processing. |
| XTS0228E | DS Wrong file format` |
| Explanation |
The INIDIR file format was not recognized. |
| XTS0229E | DS Send buffer bigger than maximum allowed |
| Explanation |
An internal transport subsystem error occurred, generated when a URL is added or deleted from the Directory Server and its size exceeds 65520 bytes. |
| XTS0230E | DS Invalid Service |
| Explanation |
Invalid type of service used. |
| XTS0231E | DS Invalid Header |
| Explanation |
Invalid Directory Service header used for communication. |
| XTS1000E | XTS Unknown error = code |
| Explanation |
This message is returned by XtsGetMessage when it cannot find text for a given error code. |
XTS1001E | XTS1002E | XTS1003E | XTS1004E | XTS1005E | XTS1006E | XTS1007E | XTS1008E | XTS1009E | XTS1010E | XTS1011E | XTS1012E | XTS1013E | XTS1014E | XTS1015E | XTS1016E | XTS1017E | XTS1018E | XTS1019E | XTS1020E | XTS1021E | XTS1022E | XTS1023E | XTS1024E | XTS1025E | XTS1026E | XTS1027E | XTS1028E | XTS1029E | XTS1030E | XTS1031E | XTS1032E | XTS1033E | XTS1034E | XTS1035E | XTS1036E | XTS1037E | XTS1038E | XTS1039E | XTS1040E | XTS1041E | XTS1042E | XTS1043E | XTS1044E | XTS1045E | XTS1046E | XTS1047E | XTS1048E | XTS1049E | XTS1050E | XTS1051E | XTS1052E | XTS1053E | XTS1054E | XTS1055E | XTS1056E | XTS1057E | XTS1058E | XTS1059E | XTS1060E | XTS1061E | XTS1062E | XTS1063E | XTS1064E | XTS1065E | XTS1066E | XTS1067E | XTS1068E | XTS1069E | XTS1070E | XTS1071E | XTS1072E | XTS1073E | XTS1074E | XTS1075E | XTS1076E | XTS1077E | XTS1078E | XTS1079E | XTS1080E | XTS1081E | XTS1082E | XTS1083E | XTS1084E | XTS1085E | XTS1086E | XTS1087E | XTS1088E | XTS1089E | XTS1090E | XTS1091E | XTS1092E | XTS1093E | XTS1094E | XTS1095E | XTS1096E | XTS1097E | XTS1098E | XTS1099E | XTS1100E | XTS1101E | XTS1102E | XTS1103E | XTS1104E | XTS1105E | XTS1106E | XTS1107E | XTS1108E | XTS1109E | XTS1111E | XTS1112E | XTS1113E | XTS1114E | XTS1115E | XTS1116E | XTS1118E | XTS1119E | XTS1120E | XTS1122E | XTS1123E | XTS1124E | XTS1125E | XTS1126E | XTS1127E | XTS1128E | XTS1129E | XTS1130E | XTS1131E | XTS1132E | XTS1133E | XTS1134E | XTS1135E | XTS1136E | XTS1137E | XTS1138E | XTS1139E | XTS1140E | XTS1141E | XTS1142E | XTS1143E | XTS1144E | XTS1145E | XTS1146E | XTS1147E | XTS1148E | XTS1149E | XTS1150E | XTS1151E | XTS1152E | XTS1153E | XTS1154E | XTS1155E | XTS1156E | XTS1157E | XTS1158E | XTS1159E | XTS1160E | XTS1161E | XTS1162E | XTS1163E | XTS1164E | XTS1165E | XTS1166E | XTS1167E | XTS1168E | XTS1169E| XTS1001E | TCP/IP Operation not permitted |
| XTS1002E | TCP/IP No such file or directory |
| XTS1003E | TCP/IP No such process |
| XTS1004E | TCP/IP Interrupted function call |
| XTS1005E | TCP/IP I/O error |
| XTS1006E | TCP/IP No such device or address |
| XTS1007E | TCP/IP Arg list too long |
| XTS1008E | TCP/IP Exec format error |
| XTS1009E | TCP/IP Bad file number |
| XTS1010E | TCP/IP No children |
| XTS1011E | TCP/IP Operation would cause deadlock |
| XTS1012E | TCP/IP Not enough core |
| XTS1013E | TCP/IP Permission denied |
| XTS1014E | TCP/IP Bad address |
| XTS1015E | TCP/IP Block device required |
| XTS1016E | TCP/IP Mount device busy |
| XTS1017E | TCP/IP File exists |
| XTS1018E | TCP/IP Cross-device link |
| XTS1019E | TCP/IP No such device |
| XTS1020E | TCP/IP Not a directory |
| XTS1021E | TCP/IP Is a directory |
| XTS1022E | TCP/IP Invalid argument |
| XTS1023E | TCP/IP File table overflow |
| XTS1024E | TCP/IP Too many open sockets |
| XTS1025E | TCP/IP Inappropriate ioctl for device |
| XTS1026E | TCP/IP Text file busy |
| XTS1027E | TCP/IP File too large |
| XTS1028E | TCP/IP No space left on device |
| XTS1029E | TCP/IP Illegal seek |
| XTS1030E | TCP/IP Read-only file system |
| XTS1031E | TCP/IP Too many links |
| XTS1032E | TCP/IP Broken pipe |
| XTS1033E | TCP/IP Argument too large |
| XTS1034E | TCP/IP Result too large |
| XTS1035E | TCP/IP Resource temporarily unavailable |
| XTS1036E | TCP/IP Operation now in progress |
| XTS1037E | TCP/IP Operation already in progress |
| XTS1038E | TCP/IP Socket operation on non-socket |
| XTS1039E | TCP/IP Destination address required |
| XTS1040E | TCP/IP Message too long |
| XTS1041E | TCP/IP Protocol wrong type for socket |
| XTS1042E | TCP/IP Bad protocol option |
| XTS1043E | TCP/IP Protocol not supported |
| XTS1044E | TCP/IP Socket type not supported |
| XTS1045E | TCP/IP Operation not supported |
| XTS1046E | TCP/IP Protocol Family not supported |
| XTS1047E | TCP/IP Address family not supported by protocol family |
| XTS1048E | TCP/IP Address already in use |
| XTS1049E | TCP/IP Cannot assign requested address |
| XTS1050E | TCP/IP Network is down |
| XTS1051E | TCP/IP Network is unreachable |
| XTS1052E | TCP/IP Network dropped connection on reset |
| XTS1053E | TCP/IP Software caused connection abort |
| XTS1054E | TCP/IP Connection reset by peer |
| XTS1055E | TCP/IP No buffer space available |
| XTS1056E | TCP/IP Socket is already connected |
| XTS1057E | TCP/IP Socket is not connected |
| XTS1058E | TCP/IP Cannot send after socket shutdown |
| XTS1059E | TCP/IP Too many references |
| XTS1060E | TCP/IP Connection timed out |
| XTS1061E | TCP/IP Connection refused |
| XTS1062E | TCP/IP Too many levels of symbolic links |
| XTS1063E | TCP/IP File name too long |
| XTS1064E | TCP/IP Host is down |
| XTS1065E | TCP/IP No route to host |
| XTS1066E | TCP/IP Directory not empty |
| XTS1067E | TCP/IP Too many processes |
| XTS1068E | TCP/IP Too many users |
| XTS1069E | TCP/IP Disc quota exceeded |
| XTS1070E | TCP/IP Stale NFS file handle |
| XTS1071E | TCP/IP Too many levels of remote in path |
| XTS1072E | TCP/IP Device not ready |
| XTS1073E | TCP/IP Write-protected media |
| XTS1074E | TCP/IP Unformatted media |
| XTS1075E | TCP/IP No connection |
| XTS1076E | TCP/IP Old, currently unused AIX errno |
| XTS1077E | TCP/IP Restart the system call |
| XTS1078E | TCP/IP Invalid file system control data |
| XTS1079E | TCP/IP Media surface error |
| XTS1080E | TCP/IP I/O completed, but needs relocation |
| XTS1081E | TCP/IP No attribute found |
| XTS1082E | TCP/IP Out of STREAM resources |
| XTS1083E | TCP/IP System call timed out |
| XTS1084E | TCP/IP Next message has wrong type |
| XTS1085E | TCP/IP Protocol error |
| XTS1086E | TCP/IP No message on stream read queue |
| XTS1087E | TCP/IP fd not associated with a stream |
| XTS1088E | TCP/IP Security authentication denied |
| XTS1089E | TCP/IP Not a trusted program |
| XTS1090E | TCP/IP Illegal byte sequence |
| XTS1091E | TCP/IP Network subsystem is unavailable |
| XTS1092E | TCP/IP WINSOCK.DLL version out of range |
| XTS1093E | TCP/IP Successful WSAStartup not yet performed |
| XTS1094E | TCP/IP Cross mount point (not really error) |
| XTS1095E | TCP/IP cannot start operation |
| XTS1096E | TCP/IP Cannot access a needed shared library |
| XTS1097E | TCP/IP operation (now) in progress |
| XTS1098E | TCP/IP Lib section in a.out corrupted |
| XTS1099E | TCP/IP Attempting to link in too many shared libraries |
| XTS1100E | TCP/IP Cannot exec a shared library directly |
| XTS1101E | TCP/IP Graceful shutdown in progress |
| XTS1102E | TCP/IP Streams pipe error |
| XTS1103E | TCP/IP Structure needs cleaning |
| XTS1104E | TCP/IP Not a XENIX named tip file |
| XTS1105E | TCP/IP No XENIX semaphores available |
| XTS1106E | TCP/IP Is a named type file |
| XTS1107E | TCP/IP Remote I/O error |
| XTS1108E | TCP/IP No medium found |
| XTS1109E | TCP/IP Wrong medium type |
| XTS1111E | TCP/IP Host not found |
| XTS1112E | TCP/IP Non-authoritative host not found |
| XTS1113E | TCP/IP This is a non-recoverable error |
| XTS1114E | TCP/IP Valid name, no data record of requested type |
| XTS1115E | TCP/IP Resource unavailable |
| XTS1116E | TCP/IP Operation canceled |
| XTS1118E | TCP/IP Disc quota exceeded |
| XTS1119E | TCP/IP Identifier removed |
| XTS1120E | TCP/IP Too many open files |
| XTS1122E | TCP/IP Multihop attempted |
| XTS1123E | TCP/IP No locks available |
| XTS1124E | TCP/IP The link has been severed |
| XTS1125E | TCP/IP No message of the desired type |
| XTS1126E | TCP/IP Function not supported |
| XTS1127E | TCP/IP Directory not empty |
| XTS1128E | TCP/IP Operation not supported |
| XTS1129E | TCP/IP Value too large to be stored in data |
| XTS1130E | TCP/IP Stale NFS file handle |
| XTS1131E | TCP/IP There is no more data available |
| XTS1132E | TCP/IP The call has been canceled |
| XTS1133E | TCP/IP Invalid procedure table from service provider |
| XTS1134E | TCP/IP Invalid service provider version number |
| XTS1135E | TCP/IP Unable to initialize a service provider |
| XTS1136E | TCP/IP System call failure |
| XTS1137E | TCP/IP Service not found |
| XTS1138E | TCP/IP Type not found |
| XTS1139E | TCP/IP There is no more data available |
| XTS1140E | TCP/IP The call has been canceled |
| XTS1141E | TCP/IP Refused |
| XTS1142E | TCP/IP Cbannel number out of range |
| XTS1143E | TCP/IP Level 2 not synchronized |
| XTS1144E | TCP/IP Level 3 halted |
| XTS1145E | TCP/IP Level 3 reset |
| XTS1146E | TCP/IP Link number out of range |
| XTS1147E | TCP/IP Protocol driver not attached |
| XTS1148E | TCP/IP No 43 CSI structure available |
| XTS1149E | TCP/IP Level 2 halted |
| XTS1150E | TCP/IP Invalid exchange |
| XTS1151E | TCP/IP Invalid request descriptor |
| XTS1152E | TCP/IP Exchange full |
| XTS1153E | TCP/IP No anode |
| XTS1154E | TCP/IP Invalid request code |
| XTS1155E | TCP/IP Invalid slot |
| XTS1156E | TCP/IP File locking deadlock error |
| XTS1157E | TCP/IP Bad fon file fmt |
| XTS1158E | TCP/IP Process died with the lock |
| XTS1159E | TCP/IP Lock is not recoverable |
| XTS1160E | TCP/IP Machine is not on the network |
| XTS1161E | TCP/IP Package not installed |
| XTS1162E | TCP/IP The object is remote |
| XTS1163E | TCP/IP Advertise error |
| XTS1164E | TCP/IP Mount error |
| XTS1165E | TCP/IP Communication error on send |
| XTS1166E | TCP/IP Locked lock was unmapped |
| XTS1167E | TCP/IP Name not unique on network |
| XTS1168E | TCP/IP FD invalid for this operation |
| XTS1169E | TCP/IP Remote address changed |