Version 8.1.4
 —  Messages and Codes  —

ADAORD Error Messages

Overview of Messages

ERROR-121 | ERROR-122 | ERROR-123 | ERROR-124 | ERROR-125 | ERROR-126 | ERROR-127 | ERROR-128 | ERROR-129 | ERROR-130 | ERROR-131 | ERROR-132 | ERROR-133 | ERROR-134 | ERROR-135 | ERROR-137 | ERROR-138 | ERROR-139 | ERROR-141 | ERROR-142 | ERROR-143 | ERROR-144 | ERROR-145 | ERROR-146 | ERROR-147 | ERROR-148 | ERROR-149 | ERROR-150 | ERROR-151 | ERROR-152 | ERROR-153 | ERROR-154 | ERROR-155 | ERROR-156 | ERROR-157 | ERROR-158

ERROR-121 DDFILEA block size too small
Explanation

The DDFILEA block size ("count-a" bytes) is too small to write a "record-type" record with a length of "count-b" bytes (file "file-number"). Actual values are provided in the message text.

Action

Assign DDFILEA to a device type with a greater sequential block size.


ERROR-122 DDFILEA structure mismatch
Explanation

DDFILEA has an invalid structure (probably a job control statement error).

Action

Correct any error and rerun the ADAORD job.


ERROR-123 No utility function given
Action

Supply one of the following keywords and rerun the job:

REORDB, REORASSO, REORDATA, REORFILE, REORFASSO, REORFDATA, RESTRUCTUREF, RESTRUCTUREDB, STORE.

See the Adabas Utilities documentation for further information.


ERROR-124 At least one file required
Explanation

An empty file list is not permitted for the functions REORFILE, REORFASSO, REORFDATA and RESTRUCTUREF and STORE.

Action

Supply the correct parameter value, and rerun the ADAORD job.


ERROR-125 The value for the MAXFILES parameter is less than the highest loaded file number (MAXFILES=count, highest loaded file number=file-number)
Action

Increase the MAXFILES value and rerun the job.


ERROR-126 DATASTORAGE record too long. The record with ISN isn-number in file file-number has a length of count bytes. The maximum permitted record length is maxcount bytes.
Explanation

The record with ISN isn-number in file file-number has a length of count bytes. The maximum permitted record length is maxcount bytes (actual values are given in the message text). This file cannot be processed by ADAORD.


ERROR-127 Input dataset does not contain data for file file-number
Explanation

Either a wrong input (DDFILEA) is supplied, or a wrong file is requested.

Action

Supply the correct parameter value and rerun the ADAORD job.


ERROR-128 I/O count mismatch
Explanation

The number of records read from DDFILEA is different from the number of records written to DDFILEA.

DDFILEA : count-a WRITES DDFILEA : count-b READS

Not all files included in processing are currently accessible.

Action

Check the job control to see whether there is a multivolume problem. Restore the save tape and rerun the ADAORD job.


ERROR-129 Invalid value for the 'SORTSEQ' parameter for file file-number
Explanation

Allowed values are:

  • SORTSEQ=ISN, to process in ISN sequence

  • SORTSEQ=DE, where DE is any descriptor whose parent is neither an MU field nor contained in a periodic group, is not a hyperdescriptor or phonetic descriptor, and is not defined with the null suppression (NU) option.

Action

Supply the correct parameter value and rerun the ADAORD job.


ERROR-130 Invalid value for the parameter 'NEWDBID'
Explanation

The value for the database ID must be in the range 1 to 65,535.

Action

Supply the correct NEWDBID parameter value and rerun the ADAORD job.


ERROR-131 The descriptor xx for file file-number has the 'NU' option
Explanation

NU option descriptors must not be used to control the sort sequence of reordering; this may cause a physically inconsistent database.

Action

Select another descriptor for the sort sequence. Then rerun ADAORD. See the Adabas Utilities documentation for more information.


ERROR-132 DSST-space allocation failed
Explanation

Not enough space is left in the Associator to allocate the DSST.

Action

Reduce the value for the MAXFILES parameter and rerun the ADAORD job.


ERROR-133 The MAXISN value specified for file file-number is less than the current TOPISN
Explanation

The MAXISN parameter setting must be greater than the TOPISN value listed in the ADAREP report. TOPISN is the highest current ISN allocated for records in the specified file (the file number is given in the message text), and cannot be defined.

Action

Specify the correct MAXISN value and rerun the ADAORD job.


ERROR-134 FST (Free Space Table) not available
Explanation

The free space table is locked by the nucleus or by another utility.

Action

Try rerunning the ADAORD job later.


ERROR-135 MAXISN parameter conflicts with NOACEXTENSION
Explanation

For file "file-number", the NOACEXTENSION option is in effect, but the MAXISN value supplied (new-value) is greater than the old MAXISN (old-value). (Actual file and MAXISN values are given in the message text.)

Action

Supply the correct MAXISN value and rerun the ADAORD job.


ERROR-137 Alternate RABNs cannot be allocated
Explanation

An attempt was made to allocate "count" ASSO/DATA alternate RABNs starting from RABN "start-rabn".

Action

Investigate and correct the cause of the error, and rerun the job.


ERROR-138 Inconsistent file list
Explanation

File "file-number" is either a coupled file or part of an expanded file, but not all related files have been included in the file list.

Action

Supply the correct file list, and rerun the ADAORD job.


ERROR-139 Overwrite system file not possible
Explanation

An attempt was made to overwrite the checkpoint or security file with a file having another file number.

Action

Correct the file number to the original and rerun the ADAORD job.


ERROR-141 Invalid ISN detected
Explanation

The invalid ISN (isn-number) was detected in file (file-number). The ISN is either

  • equal to zero; or

  • greater than MAXISN (max-isn-val).

Action

Repair the file and reexecute ADAORD.


ERROR-142 Duplicate ISN detected
Explanation

ISN (isn-number) is contained twice in file (file-number).

Action

Correct the file and reexecute ADAORD.


ERROR-143 DLOG area allocation failed
Explanation

The allocation of the DSF logging area failed. An attempt was made to allocate (count) blocks starting at Associator RABN (rabn-number).

Action

Correct the RABN assignment and reexecute ADAORD.


ERROR-144 Error on DDFILEA
Explanation

After reopening DDFILEA for input, the first record read did not have record number 1. Not all the files included in the processing are currently accessible.

Action

Check the JCL to determine whether there is a multivolume problem. Restore your save tape and rerun the ADAORD job.


ERROR-145 Storing {CHECKPOINT | SECURITY} file not allowed
Explanation

A version 5.2 or below checkpoint file cannot be converted by ADAORD STORE to version 5.3 or above. A version 5.3 or below security file cannot be converted by ADAORD STORE to version 6.1 or above.

Action

Remove the checkpoint or security file from the file list and rerun ADAORD.


ERROR-146 Descriptor not found
Explanation

The nucleus returned response 57: the descriptor "xx" for file "file-number" could not be found. ADAORD cannot unload the index for this file.

Action

Run ADAICK ICHECK for this file; remove the error and rerun ADAORD.


ERROR-147 Duplicate file number detected
Explanation

The file "file-number" was specified twice (the actual file value is provided in the message text).

Action

Correct the error and rerun the job.


ERROR-148 Partial overwrite of coupled/expanded files
Explanation

The file "file-number-a" is coupled with or, in an expanded file, linked to the file "file-number-b", which is not part of the STORE operation (the actual file values are provided in the message text). This STORE operation cannot be serviced because it would result in a logical data inconsistency.

Action

Check the STORE function parameter input; correct the error and then rerun the STORE job.


ERROR-149 Invalid value for parameter 'ALLOCATION'
Explanation

Valid values are ALLOCATION=FORCE | NOFORCE.

Action

Supply the correct parameter value and rerun the job.


ERROR-150 Invalid EXCLUDE parameter
Explanation

The file number given in the message either has not been specified at all for REORDER/STORE, or has been specified twice in the EXCLUDE parameter.

Action

Correct the error and rerun the job.


ERROR-151 File file-number is a physically coupled file
The ISNSIZE cannot be modified
Explanation

A coupled index contains the ISNs of the file it is coupled to. These ISNs have the byte-size specified by the other file's ISNSIZE. Even if the other file is also modified by ADAORD, the ISNSIZE cannot be modified using the coupled index.

Action

Remove the ISNSIZE parameter or modify the file-list.


ERROR-152 Overwrite system file not possible
Explanation

The Replicator or SLOG system file may not be overwritten by a non-system file with the same file number.

Action

Correct the file number to the original and rerun the ADAORD job.


ERROR-153 Storing Replicator/SLOG file not allowed
Explanation

The file on the input tape is not a valid Replicator or SLOG system file.

Action

Remove the Replicator or SLOG system file from the file list and rerun ADAORD.


ERROR-154 A Reptor database may only contain the files CHECKPOINT, SECURITY, REPLICATOR, and SLOG
Explanation

A database defined as an Event Replicator Server (created with REPTOR=YES) must not contain user files or system files not related to replication.

Action

Do not attempt to store files other than CHECKPOINT, SECURITY, REPLICATOR, or SLOG on Event Replicator Server databases.


ERROR-155 The MAXISN2 value specified for file file-number is less than the current TOP AC2 ISN
Explanation

The MAXISN2 parameter setting must be greater than the TOP AC2 ISN value listed in the ADAREP report. TOP AC2 ISN is the highest current secondary ISN allocated for secondary spanned records in the specified file (the file number is given in the message text), and cannot be defined.

Action

Specify the correct MAXISN2 value and rerun the ADAORD job.


ERROR-156 Invalid value for the parameter MAXISN2
Explanation

The MAXISN2 parameter values must satisfy the following expressions:

  • If the ISNSIZE is 3, the value of MAXISN2 must be greater than zero, but less than or equal to 16,777,215 (0 < MAXISN2 <= 16,777,215).

  • If the ISNSIZE is 4, the value of MAXISN2 must be greater than zero and less than or equal to 4,294,967,294 (0 < MAXISN2 <= 4,294,967,294).

Action

Supply the correct MAXISN2 parameter value and rerun the job.


ERROR-157 Maximum number of user system files defined
File file-number was originally loaded with the SYSFILE option, but the maximum number of user system files already exists.
Explanation

The limit of ten user system files has already been reached.

Action

Unload, delete, and reload one of the user system files without the SYSFILE option. Then rerun this utility.


ERROR-158 The database is active but the utility communications block (DIB) is missing the nucleus entry
Explanation

The ADAORD utility determined the nucleus was active without a DIB entry.

Action

Check the job to ensure the correct ASSO, DATA, and WORK data sets are specified for the given DBID.


Top of page