Review the Report of Tape Creation that accompanies the release package before restoring the release data to disk.
The installation tape contains the following datasets in the sequence indicated in the report:
| Dataset | Contents |
|---|---|
| ATMvrs.LIBR | Executable modules and sample jobs |
| ATMvrs.SYS5 | ADALOD input for the ATM PRR file |
| ATMvrs.SYS6 | ADALOD input for the ATM STJ file |
| ATMvrs.SYS7 | ADALOD input for the user proxy log (UPL) file |
| ATMvrs.SYS8 | ADALOD input for the ET data
file
|
| ATMvrs.INPL | Online Services application |
| ATMvrs.ERRN | Online Services messages |
| ADA743.LX06 | Adabas load library update |
where vrs is the version, revision, and system maintenance level of the product. Use the comments in the jobs when modifying them to conform to site requirements.
The steps needed for a successful installation are as follows:
| Step | Description | Job Name |
|---|---|---|
| Before proceeding with the installation, ensure that all necessary preparation has been completed as described in section Before You Install. | ||
| 1 | Restore the libraries from the installation tape. | |
| 2 | Create the transaction manager daemon database. | ATMI030 |
| 3 | Load the transaction manager files to the ATM daemon’s database. | ATM1050 |
| 4 | INPL the Online Services application SYSATM. | ATM1061 |
| 5 | Define the default job parameters for use by the transaction manager proxy. | |
| 6 | Prepare the Adabas Transaction Manager daemon job. | ATMI200 |
| 7 | Enable databases for two-phase commit. | |
| 8 | Prepare the Adabas System Coordinator daemons to support ATM. | |
| 9 | Make Adabas Transaction Manager components available as required. | |
| 10 | Define Adabas Transaction Manager to MSHP CORRECT facility. |
Following is the general Adabas Transaction Manager installation procedure. The actual installation depends on your particular requirements and the specific contents of the release package provided by Software AG for your site. Information in the release package is intended for your system. If that information differs from the information in this section, use the release package information or contact Software AG technical support for assistance.
to restore libraries from the installation tape:
Use LIBR to unload the library:
| Variable | Is the... |
|---|---|
| cuu | tape unit number |
| vrs | version, revision, and system maintenance level |
| tttttt | volume serial number of the installation tape |
| xx | file spacing information; see the Report of Tape Creation |
* $$ JOB JNM=LIBREST,CLASS=O,DISP=D * $$ LST CLASS=A,DISP=H // JOB LIBREST // ASSGN SYS006,cuu,VOL=tttttt // ASSGN SYS005,IGN // MTC REW,SYS006 // MTC FSF,SYS006,xx // EXEC LIBR RESTORE S=SAGLIB.AVIvrs:SAGLIB.AVIvrs - TAPE=SYS006 TL=tttttt LIST=Y /* // MTC REW,SYS006 /& * $$ EOJ
The transaction manager daemon database holds recovery information
and, depending on the setting of the TMETDATA parameter,
ET data, but no other operational data. The
remaining files are for occasional use for special purposes – to store
diagnostic log information obtained by the transaction manager proxy, and to
hold details of transactions that were forcibly terminated. The size of this
database depends mainly on the number of transactions that might be in progress
at the same time, and the total amount of ET data,
if any, that the ATM daemon will need to store.
to create the daemon database:
Use sample job ATMI030, modified to meet your requirements, to establish the database.
Initially, define a database with the following component sizes:
DATA: 250 cylinders
ASSO: 50 cylinders
WORK: 50 cylinders
TEMP: 20 cylinders
SORT: 20 cylinders
Enough Data Storage space in the recovery file must be allocated to accommodate the maximum number of concurrently active transactions. The following can be used as a guide for calculating the required Data Storage space:
x times y is the required number of Data Storage blocks,
where x is the maximum number of concurrent
transactions/branches at the local ATM daemon, and y is the average
number of compressed recovery records (PRRs) per Data Storage block. Assume
that a compressed PRR requires about 2300 bytes if the transaction has 2000
bytes (compressed) of ET data, and 300 bytes if
there is no ET data. It is recommended to allow a
safety margin of about 50 percent extra space.
Standard block sizes are adequate for most sites. However, if transactions which perform changes to many databases are to be used, it may be necessary to increase the Data Storage block size to accommodate large recovery records.
No ET data will be stored in this
database’s checkpoint file. The following parameters should be adequate for the
daemon checkpoint file.
MAXISN=10,000
DSSIZE=100B
NISIZE=20B
UISIZE=8B
Use the normal reporting utilities to determine whether space shortages are likely to occur.
The recovery record file, suspect transaction file, proxy log file and
ET data file have numbers 5, 6, 7 and 8,
respectively. These file numbers are fixed. Since no application files should
be loaded into this database, there should be no conflict.
If ET data is to be stored in the ATM
daemon’s database (TMETDATA=ATM), define file 8 with
MAXISN large enough to allow an ISN for each ETID that
will ever be used in this Adabas Transaction Manager’s local system. A
decompressed ET data record occupies about 2
kilobytes. If you choose to store ET data in target
databases (TMETDATA=TARGETS), file 8 will not be used.
For more information, see TMETDATA
parameter.
to load the Transaction Manager files into the daemon's
database:
Use job ATMI050 to define the recovery record, suspect transaction,
proxy log and ET data files in the ATM daemon’s
database.
The suggested sizes are adequate for the purposes of testing. You can use the normal reporting utilities to check whether your system needs larger files.
The Adabas Transaction Manager Online Services application is delivered on the installation tape as a NATUNLD dataset created under Natural 3.1. The application programs are stored in libraries SYSATM and SYSMTvrs where vrs is the version, revision, and system maintenance level of the product.
to install the Online Services application SYSATM:
Use a Natural utility to install the Online Services application and ERRLODUS to install its messages.
If Natural Security is installed, define the libraries SYSATM and SYSMTvrs, where vrs is the version, revision, and system maintenance level of the product.
The default job parameters for the Transaction Manager proxy must be defined. For further information, see Online Services, Job Parameters. See also the section Adabas Transaction Manager Components.
to define the default job parameters for the Transaction Manager
proxy:
Start a Natural session and log on to the newly installed SYSATM application. Invoke the Menu function. If you have not defined LFILE 152 for your Natural session, a message will prompt you to define it now. Select Systems Settings, then option LFILE 152 Maintenance. Enter the Database ID and file number of the system file that you created when you installed the Adabas System Coordinator. Enter values for the remaining input fields, and confirm your definition. Now return to the main menu and select the Job Parameters option. For a detailed description of the following step, refer to Online Services, Job Parameters
On the Job Parameters screen, press PF10 to add a new default definition. Make sure that you set Adabas Transaction Manager to ON. Confirm your new definition, then select it for modification by marking it with an “m”. Set the SVC number that will be used by the Adabas Transaction Manager daemon that you are installing.You must also set the name of the Adabas System Coordinator group in which your client jobs and TP systems will execute. The provided default values for the remaining parameters should be satisfactory for the purpose of completing and verifying the installation. You can review and change them as required once you have completed and verified the installation.
Because the Adabas Transaction Manager daemon executes as a special kind of Adabas nucleus, its JCL is similar to that of a normal Adabas nucleus.
to prepare the Adabas Transaction Manager daemon job:
Make any necessary site-specific changes to ATMI200 so that it can be used as a procedure for a started task.
Ensure that any ADALNK module that can be loaded by the ATM job does not have the Adabas System Coordinator stub linked into it.
Specify ADARUN DTP=TM.
Specify ADARUN TMLOG=NEVER for the purpose of
verifying the installation. Once the verification process has been completed,
reconsider this parameter setting.
Specify ADARUN NONDES=YES. This is the
default setting.
Set other ADARUN parameters as you would for a normal database. For initial testing, the default limits and pool and buffer sizes should be sufficient.
See the section Parameters for a description of the ADARUN parameters that affect Adabas Transaction Manager operation.
Note:
An Adabas Transaction Manager daemon job must be run in each
operating system image that will participate in distributed transaction
processing (DTP). If more than one Adabas SVC is used in the same system image,
an Adabas Transaction Manager daemon must be run under each Adabas SVC that
will participate in DTP.
to enable databases for two-phase commit processing
Ensure that the parameter
ADARUN DTP=RM
is set in every database that participates in global transactions coordinated by Adabas Transaction Manager.
Add the ATM load library to the LIBDEF SEARCH chain.
In the case of Adabas Parallel Services databases, use the Adabas 7.4 update library LX06, ahead of the standard Adabas 7.4.3 library in the LIBDEF SEARCH chain.
In the case of Adabas 7.1 databases, you must apply fix A$71306 to your Adabas 7.1 load library. The fix is contained in member ZAPOPT of the supplied JOBS library.
Refer to the Adabas System Coordinator documentation for more information on how to run Adabas Transaction Manager 7.4 with Adabas 7.1 databases. The same instructions can be used for running Adabas Transaction Manager 7.5 with Adabas 7.1 databases.
The ATM load library should be made available to all SYSCO daemons which will run under the same Adabas SVC as an ATM v7.5 daemon.
The SYSCO daemons must be started with the parameter setting
PRODUCT=ATM.
The ATM load library should be made available:
in the LIBDEF SEARCH chain of batch jobs and JCL procedures for CICS and IMS/TM systems that will be used by users or applications that require Adabas Transaction Manager services;
in the COMPLIB of the JCL procedures for Com-plete systems that will be used by users or applications that require Adabas Transaction Manager services.
Ensure that the Adabas System Coordinator stub has been linked into the Adabas link modules that will be executed in each of the above environments.
The ATM load library and the Adabas System Coordinator library should be made available:
in the LIBDEF SEARCH chain of Adabas Transaction Manager daemon jobs;
in the LIBDEF SEARCH chain of multiuser database nucleus jobs that
will run with DTP=RM.
Caution:
The Adabas Transaction Manager proxy must not be used by any job
or started task that executes an Adabas Transaction Manager daemon, an Entire
Net-Work node, or an Adabas nucleus running in multiuser mode. You should
therefore make sure that the Adabas System Coordinator stub is not present in
any ADALNK module that might be used by these jobs.
Corrections for Adabas Transaction Manager will be distributed as zaps
that are to be applied using the MSHP CORRECT facility. Before applying
corrections you must define Adabas Transaction Manager to MSHP with the
MSHP ARCHIVE command (see the following sample
job):
// JOB ARCHIVE // OPTION LOG // EXEC MSHP ARCHIVE ATMvrs COMPRISES 9001-ATM-00 RESOLVES ’SOFTWARE AG - ADABAS TRANSACTION MANAGER Vv.r’ ARCHIVE 9001-ATM-00-vrs RESIDENCE PRODUCT=ATMvrs - PRODUCTION=saglib.ATMvrs - GENERATION=saglib.ATMvrs /* /&
