Version 7.4.4

Adabas Dump Formatting Tool (ADAFDP)

This section describes the use of the Adabas dump formatting tool ADAFDP.


ADAFDP Function

ADAFDP is the address space dump formatting module. During abnormal shutdown of the Adabas nucleus, this module receives control to format and display information that should help you analyze the reason for the error.

During a nucleus shutdown, ADAMPM determines the shutdown reason. If the reason is abnormal termination, ADAMPM loads the ADAFDP module into the address space prior to the 20 call to the Adabas SVC. ADAFDP subsequently receives control to format nucleus information.

If ADAFDP cannot be loaded, message ADAF03 is written to the console and abnormal shutdown continues.

Top of page

ADAFDP Output

Much of the information formatted by ADAFDP is self-explanatory. However, because the type and amount of information depends on the shutdown situation, a summary of ADAFDP output is provided in this section.

ADAFDP Messages

Message Description
ADAH51 / ADAH52

The message is displayed on the console and written to DDPRINT at the point where the format begins and terminates.

ADAMPM ABEND CODE and PSW

If an Abend code and program status word (PSW) were saved in ADAMPM by the Adabas ESTAE, ADAFDP displays these. In addition, ADAFDP determines the module whose entry point best fits the PSW and calculates the offset within that module. If the ADAMPM abend code and PSW are zero, ADAFDP does not format this information.

ADABAS MODULE LOCATIONS

ADAFDP formats and displays the location of each of the Adabas nucleus modules resident in the address space.

ADDRESS LOCATIONS FOR USER EXITS

ADAFDP formats and displays the location of any user exit loaded with the Adabas nucleus.

ADDRESS LOCATIONS FOR HYPEREXITS

ADAFDP formats and displays the location of any hyperexit loaded with the Adabas nucleus. Hyperexits 10-31 are displayed as A-U, respectively.

ADANC0 STANDARD REGISTER SAVE AREA

Registers 0-7/8-F, which are saved in ADANC0. ADAFDP determines if any of these registers contains an address that points at a nucleus pool in storage. If yes, ADAFDP indicates which pool and snaps storage at that address. If the register is 12 and it points to a user thread, ADAFDP snaps the entire thread.

ADANC0 ABEND SAVE REGISTERS

Registers 0-7/8-F, which are saved in ADANC0 as a result of a user abend. ADAFDP determines if any of these saved registers contains an address that points at a nucleus pool in storage. If yes, ADAFDP indicates which pool and snaps storage at that location. If the saved register is 12 and it points to a user thread, ADAFDP snaps the entire thread.

ADAMPM SAVE REGISTERS

Registers 0-7/8-F, which were saved in ADAMPM by the Adabas ESTAE. These are the same registers displayed with the ADAM99 message. ADAFDP determines if any of these saved registers contains an address that points within a nucleus pool in storage. If yes, ADAFDP indicates which pool and snaps storage at that location.

BEGIN / ENDING ADDRESSES OF POOLS / TABLES

ADAFDP determines begin/ending address locations for pools and tables for the Adabas nucleus. These addresses are presented for easy location in the actual dump. See Pool Abbreviations for more information.

ADABAS THREADS

ADAFDP formats the physical threads including threads 0, -1, and -2. The number of lines depends on the value of NT. The thread that was active at the time of the abnormal termination (if any) is marked by a pointer “- ->”.

USER THREADS

For any of the threads -2 to NT that had assigned work to perform, ADAFDP formats and displays information about the status of that thread. See User Threads for more information:

FOLLOWING COMMANDS WERE FOUND IN THE CMD QUEUE

ADAFDP scans the command queue and formats information for any command found in the queue. See Command Information for more information.

POOL INTEGRITY CHECK

ADAFDP check the integrity of several pools within the Adabas nucleus address space. If an error is detected within that pool, ADAFDP indicates which pool and what type of error was encountered. In addition, ADAFDP snaps storage at the location where the error was detected.

FOLLOWING RABNS / FILES ACTIVE IN BUFFER POOL

ADAFDP scans the buffer pool header for RABNs that were active or being updated. See RABN Information for more information.

ADAIOR REGS FOUND AT OFFSET X’080’

Registers 0-7/8-F found saved in ADAIOR at this offset. If ADAFDP determines that any of these register values is pointing within an Adabas pool, it snaps storage at that location.

ADAIOR REGS FOUND AT OFFSET X’0C0’

Registers 0-7/8-F found saved in ADAIOR at this offset. If ADAFDP determines that any of these register values is pointing within an Adabas pool, it snaps storage at that location.

ICCB POINTED FROM X’A0’ IN IOR

The ICCB address to which this offset in ADAIOR points.

ADAI22 ADAIOR TRACE TABLE

Format of ADAIOR trace table; same as that found with the ADAM99 message.

Pool Abbreviations

Pool Abbreviation Description
LOG Log area
OPR Adabas nucleus operator command processing area
CQ Address of the command queue, which is formatted later by ADAFDP
ICQ Internal command queue
TT Thread table
IA1 Software AG internal area 1
SFT Session file table
FU File usage table
FUP File update table
IOT I/O table for asynchronous buffer flushing
PL2 PLOG area for asynchronous buffer flushing
PET Table of posted ETs
TPT Tpost
TPL Tplatz
UQP Unique descriptor pool
UHQ Upper hold queue
HQ Hold queue
UUQ Upper user queue
UQ User queue
FP Format pool
FHF File HILF element
PA Protection area
TBI Table of ISNs
TBQ Table of sequential searches
WK3 Work part 3 space allocation table
IA2 Software AG internal area 2
WK2 Work part 2 space allocation table
VOL VOLSER table
WIO Work block I/O area
FST Free space table work area
UT User threads
WP Work pool
AW2 Work block asynchronous I/O area
IOP I/O pool related to asynchronous buffer flush
IU2 Buffer pool importance header upper 2
IU1 Buffer pool importance header upper 1
BU2 Buffer pool upper header 2
BU1 Buffer pool upper header 1
BH Address location of the buffer pool header, information from the buffer pool header is formatted later by ADAFDP
BP Address location of the physical start of the buffer pool

User Threads

Information Description
Thread Number -2 to NT
Status Indicates the current status of the thread:
  • *Active*: the currently active thread

  • In Use: thread has been assigned work

  • Waiting For I/O: waiting for a block not in buffer pool

  • Waiting For RABN: waiting for a RABN already in use

  • Waiting For Work-2 Area Block: similar to waiting for I/O

  • Waiting Workpool Space: provides number of bytes in decimal

  • Ready To Run: waiting to be selected for execution

CMD The Adabas command being executed
Response Code Response code (if any)
File Number File number for this command
ISN Internal sequence number for this command
Sub. Rsp Subroutine response code (if any)
Last RABN for I/O Last RABN required by command processing, in decimal
Type Last RABN type (A - ASSO, D - DATA)
CQE Addr Command queue element address for this command
User Jobname Job name for user who executed this command
ITID Internal Adabas ID for user who executed this command
User User ID for user who executed this command
Unique global ID 28-byte ID for user who owns this command
Buffer Addresses buffer addresses for: control block, format buffer, search buffer, value buffer, ISN buffer
Buffer Lengths

FL: format buffer length
RL: record buffer length
SL: search buffer length
VL: value buffer length
IL: ISN buffer length

Snap Thread The first 144 bytes of the user thread are snapped

Command Information

Information Description
CQE Address The address location of this CQE
F Command queue flag bytes:
  • First Byte: General Purpose Flag

    • X’80’: User buffers in service partition, region, address space

    • X’40’: ET command waiting for 12 call

    • X’20’: Waiting for 16 call

    • X’10’: 16 call required

    • X’08’: Attached buffer

    • X’04’: Attached buffer required

    • X’02’: X-memory lock held (MVS only)

  • Second Byte: Selection Flag

    • X’80’: In process

    • X’40’: Ready to be selected

    • X’20’: Search for UQE done

    • X’10’: UQE found

    • X’08’: Not selectable during BSS=x’80’ status

    • X’04’: Not selectable during ET-SYNC

    • X’02’: Waiting for space

    • X’01’: Waiting for ISN in HQ

CMD The command type
File Number The file number for this command
Job Name Job name for the user
Addr User UQE Address of users UQE, if searched for and found
Addr User ASCB Address location of user’s ASCB
Addr ECB Address location of user’s ECB (in user’s address space)
Addr User UB Address of users UB (in user’s address space)
Addr User PAL Address location of user’s parameter address list
CQE ACA ACA field of CQE.
CQE RQST RQST field of CQE
Abuf/Pal Address of the attached buffer/parameter address list (PAL) for CMD
Comm Id 28-byte unique user ID for this command

RABN Information

Information Description
RABN Number The RABN number in decimal
Type Type of block (A - ASSO, D - DATA)
Flag BP header element flag byte:
  • AKZ X’40’: Active indicator

  • UKZ X’20’: Update indicator

  • RKZ X’10’: Read indicator

  • XKZ X’04’: Access is waiting for block

  • YKZ X’02’: Update is waiting for block

  • SKZ X’01’: Write indicator

File File number that owns this block
Address Address location of block in storage.

Top of page