Message Class 2003 - PL/I Wrapper

The messages have the format:

2003nnnn

where	2003	is the message class, and
	`nnnn`	is the message number in the range 0000 - 9999

Overview of Messages

20030001 | 20030002 | 20020003 | 20030004 | 20030005 | 20030006 | 20030007 | 20030008 | 20030009 | 20030010 | 20030011 | 20030012 | 20030101 | 20030102 | 20030103 | 20030104 | 20030105 | 20030106 | 20030107 | 20030108 | 20030109 | 20030110 | 20030111 | 20030112 | 20030113 | 20030114 | 20030115 | 20030116 | 20030117

20030001	Missing option TARGET - (BATCH_ZOS/IMS_ZOS/CICS_ZOS)
Explanation	No option `TARGET` was specified during generation. `TARGET` is a required option.
Action	Specify the option `TARGET`.

20030002	Wrong option `target_option` for TARGET - (BATCH_ZOS/IMS_ZOS/CICS_ZOS)
Explanation	A wrong option `TARGET` was specified during generation. Valid targets are `BATCH_ZOS`, `IMS_ZOS` and `CICS_ZOS`.
Action	Specify a correct option `TARGET`.

20020003	Unbounded arrays not supported: `library_name`/`program_name`/`parameter_name`
Explanation	Unbounded arrays are not supported. The appendix of the message gives you the library, program and parameter name of the IDL parameter causing the error.
Action	Adapt your IDL accordingly and re-generate your clients, server, stubs, etc.

20030004 idl_data_type without maxlength not supported: library_name/program_name/parameter_name

Explanation

The following IDL data types are not supported if no maximum length is given:

IDL Data Type	Description
AV	Alphanumeric variable length
KV	Kanji variable length

The appendix of the message gives you the library, program and parameter name of the IDL parameter causing the error.

Action

Adapt your IDL accordingly and re-generate your clients, server, stubs, etc.

20030005 Length for idl_data_type fields must be even: library_name/program_name/parameter_name

Explanation

The length of the IDL data types below must be even:

IDL Data Type	Description
KV	Kanji variable length
K	Kanji

This is because the resulting PL/I data type graphic is measured in graphics (2 bytes each) and the IDL length for K, KV in bytes.The appendix of the message gives you the library, program and parameter name of the IDL parameter causing the error.

Action

Adapt your IDL accordingly and re-generate your clients, server, stubs, etc.

20030006 IDL data type idl_data_type not supported: library_name/program_name/parameter_name

Explanation

The following IDL data types are not supported:

IDL Data Type	Description
BV	Binary variable length

Action

Adapt your IDL accordingly and re-generate your clients, server, stubs, etc.

20030007 Maximum length for idl_data_type usually idl_max_len: library_name/program_name/parameter_name

Explanation

For the following IDL data types the maximum length of the resulting PL/I data types is usually restricted by the PL/I programming language.

IDL Data Type	IDL Maximum Length	Resulting Length in PL/I
K	32766 bytes	16383 graphics
KV	32766 bytes	16383 graphics
A	32767 bytes	32767 characters
AV	32767 bytes	32767 characters
B	4095 bytes	32760 bits

In this case a warning message is produced, generation of sources continues. However, it is likely that the compilation of the generated sources is not possible.The appendix of the message gives you the library, program and parameter name of the IDL parameter causing the warning message.

Action

If the compilation process of the generated sources fails, adapt your IDL accordingly and re-generate your clients, server, stubs, etc.

20030008

Invalid compressionLevel value

Explanation

The following IDL data types below are not supported if a maximum length is given:

IDL Data Type	Description
BV	Binary variable length

The Appendix of the message gives you the library, program and parameter name of the IDL parameter causing the error.

Action

Adapt your IDL accordingly and re-generate your clients, server, stubs, etc.

20030009 Precision for idl_data_type exceeds 15: library_name/program_name/parameter_name

Explanation

For the following IDL data types the maximum precision of the resulting PL/I data types is usually restricted by the PL/I programming language.

IDL Data Type	PL/I Restriction
N	Depending on your compiler, 15 or 31 numeric picture characters in the picture clause.
NU
P	Depending on your compiler, 15 or 31 digits
PU	Depending on your compiler, 15 or 31 digits

If the precision exceeds 15 a warning message is produced, generation of sources continues. However, depending on your compiler, compilation of the generated sources may not possible.The appendix of the message gives you the library, program and parameter name of the IDL parameter causing the warning message.

Action

If the compilation process of the generated sources fails, adapt your IDL accordingly and re-generate your clients, server, stubs, etc.

20030010 IDL data type type must be ALIGNED: library_name/program_name/parameter_name

Explanation

The IDL data types below have to be aligned. This applies only for RPC servers in the environment IMS:

IDL Data Type	Description
L	Logical
B	Binary

The appendix of the message gives you the library, program and parameter name of the IDL parameter causing the warning message.

Action

Adapt your IDL and re-generate your clients, server, stubs, etc.

20030011	Total number of digits supported is 29: `library_name`/`program_name`/`parameter_name`
Explanation	For PL/I the total number of digits (`number1`+`number2`) supported by EntireX is 29, see Mapping IDL Data Types to PL/I Data Types.
Action	Adapt your IDL and re-generate your clients, server, stubs, etc.

20030012	Maximum digits after decimal point supported is 7: `library_name`/`program_name`/`parameter_name`
Explanation	For PL/I the digits after decimal point (`number2`) supported by EntireX is 7, see Mapping IDL Data Types to PL/I Data Types.
Action	Adapt your IDL and re-generate your clients, server, stubs, etc.

20030101	Out of memory
Explanation	The operating system could not satisfy a memory request.
Action	Increase your memory resources and retry.

20030102	Error calling broker stub
Explanation	Calling the broker stub by the Generic RPC Services program (`xxxSRVI`) failed.
Action	Check if the broker stub is correctly linked and/or installed in your environment.

20030103	ERXCOM version invalid
Explanation	The field `COM_VERSION` in the RPC communication area is not correctly assigned. This is checked in the Generic RPC Services program (`xxxSRVI`) and Specific RPC Functions module (`xxxSRVS`).
Action	Correctly assign the `COM_VERSION` field. For information on how to declare and initialize the RPC communication area, see Using the RPC Communication Area under Writing Applications with the PL/I Wrapper.

20030104	ERXCOM size invalid
Explanation	The field `COM_SIZE` in the RPC communication area is not correctly assigned.
Action	Correctly assign the `COM_SIZE` field. For information on how to declare and initialize the RPC communication area, see Using the RPC Communication Area under Writing Applications with the PL/I Wrapper.

20030105	Value of IDL PU data type must be positive
Explanation	With a packed-decimal unsigned IDL data type, negative values cannot be sent.
Action	Either use positive values (including zero) or change the IDL data type to P packed decimal.

20030106	Invalid function
Explanation	The Generic RPC Services program (`xxxSRVI`) was invoked with an invalid function assigned to `COM_FUNCTION` in the RPC communication area.
Action	Correct your program. For a list of valid functions, refer to `COM_FUNCTION`.

20030107	Internal error
Explanation	An internal error occurred in a specific RPC functions module (`xxxSRVS`).
Action	Contact Software AG support.

20030108	Calling Generic RPC Services (`xxxSRVI`) failed
Explanation	Calling the Generic RPC Services (`xxxSRVI`) by the RPC stub from the Specific RPC Functions module (`xxxSRVS`) failed.
Action	Contact Software AG support.

20030109	CICS error RESP1/RESP2 `resp1`/`resp2` [ - `additional_error_text` ]
Explanation	CICS returned an error during an `EXEC CICS LINK` call. `RESP1` and `RESP2` are CICS return codes. The additional error text gives more information on the program called. Possible programs are: calling Generic RPC Services (`xxxSRVI`)
Action	Contact Software AG support.

20030110	CICS PGMIDERR [ - `additional_error_text` ]
Explanation	CICS did not find the program specified in an `EXEC CICS LINK` call. The additional error text gives more information on the program called, possible programs are: calling Generic RPC Services (`xxxSRVI`)
Action	Contact Software AG support.

20030111	Reserved
Explanation	None.
Action	None.

20030112	User ID missing
Explanation	The required field `COM_CLIENT_USERID` in the RPC communication area is not given.
Action	Specify a user ID. For information on the required settings in the RPC communication area, see Using the RPC Communication Area under Writing Applications with the PL/I Wrapper.

20030113 Password missing

Explanation

The password is required in the following situations:

If EntireX Security is installed, a password is required in the field COM_CLIENT_PASSWORD. See Step 5: Optional Settings in the RPC Communication Area under Writing Applications with the PL/I Wrapper.
If the flag COM_CLIENT_NATSECURITY is switched on, a password is required in the field COM_CLIENT_PASSWORD or COM_CLIENT_RPCPASSWORD.

Action

Depending on the situation, specify a password or see Using Natural Security under Writing Applications with the PL/I Wrapper.

20030114	RPC Protocol reply faulty
Explanation	The reply from the RPC Server is invalid and does not follow the rules of the RPC protocol.
Action	Contact Software AG support.

20030115	Library missing
Explanation	The field `COM_SERVER_LIBRARY` in the RPC communication area is not given. The field is required for RPC conversations.
Action	For information on how to work with RPC conversations, see Conversational RPC under Writing Applications with the PL/I Wrapper.

20030116	Last conversation not ended
Explanation	The RPC communication area holds an ongoing RPC conversation which has not been ended. It is not possible to ship in parallel simple non-conversational RPC requests or open another RPC conversation using the same RPC communication area.
Action	For information on how to work with RPC conversations, see Conversational RPC under Writing Applications with the PL/I Wrapper.

20030117	No ongoing conversation
Explanation	The RPC communication area holds an ongoing RPC conversation which has not been ended. It is not possible to ship in parallel simple non-conversational RPC requests or open another RPC conversation using the same RPC communication area.
Action	For information on how to work with RPC conversations, see Conversational RPC under Writing Applications with the PL/I Wrapper.