EntireX Prerequisites
This document covers the following topics:
General Prerequisites
-
Java 7 or Java 8 for all Java-based components. See Support of Java 8.
-
For other Software AG products if not stated otherwise: the versions that are still supported and that were available when
this version of EntireX was released.
-
Software AG supports third-party technology, for example operating system versions, products or functionality, only for as
long as this technology is officially supported by the third-party vendor.
z/OS Prerequisites
Note:
The supported versions of CICS and IMS are listed under Product Compatibility for IBM Platforms on the Software AG Corporate Website.
Component |
Prerequisites |
COBOL RPC Client and Server |
|
PL/I RPC Client and Server
|
-
To compile the sources generated by the EntireX Workbench
component PL/I Wrapper: Compiler supported by the
PL/I Wrapper, for example PL/I for MVS & VM V1R1.1, or the newer Enterprise PL/I for z/OS V4.R3.
|
WebSphere MQ RPC Server and Listener
|
-
To run the WebSphere MQ RPC Server or WebSphere MQ Listener, you need either the base Java classes or a full installation
of WebSphere MQ.
For WebSphere MQ version 7.0, 7.1, 7.5 or 8.0 you need at least the JAR file com.ibm.mq.jar .
Note that this file name is subject to change in a future version of WebSphere MQ.
Check your IBM documentation for details.
|
Application Monitoring |
-
As a general prerequisite: EntireX components of version 9.0 or above.
-
Natural RPC supports application monitoring with Natural Version
8.2.4 or above in all supported Natural environments. To enable
application monitoring for Natural RPC with Natural Version 8.2.3, install the required load fix
for the appropriate Natural version: Natural Version 8.2.3 for Mainframes
with Zap NA93143 and with
Natural RPC Version 8.2.3.2 as delivered with Natural Version 8.2.3 L002 for
Mainframes.
|
UNIX Prerequisites
Component |
Prerequisites |
Wrapper for EJB |
|
Micro Focus COBOL |
|
WebSphere MQ RPC Server and Listener
|
-
To run the WebSphere MQ RPC Server or WebSphere MQ Listener, you need either the base Java classes or a full installation
of WebSphere MQ.
For WebSphere MQ version 7.0, 7.1, 7.5 or 8.0 you need at least the JAR file com.ibm.mq.jar .
Note that this file name is subject to change in a future version of WebSphere MQ.
Check your IBM documentation for details.
|
Application Monitoring |
-
As a general prerequisite: EntireX components of version 9.0 or above.
-
Natural RPC supports application monitoring with Natural Version
6.3.14 or above. To enable application monitoring for
Natural RPC, install the appropriate Natural version.
|
Windows Prerequisites
Component |
Prerequisites |
C Wrapper |
|
DCOM Wrapper |
|
.NET Wrapper |
|
Wrapper for EJB |
|
Micro Focus COBOL |
|
Microsoft Visual Studio Add-ins |
|
WebSphere MQ RPC Server and Listener
|
-
To run the WebSphere MQ RPC Server or WebSphere MQ Listener, you need either the base Java classes or a full installation
of WebSphere MQ.
For WebSphere MQ version 7.0, 7.1, 7.5 or 8.0 you need at least the JAR file com.ibm.mq.jar .
Note that this file name is subject to change in a future version of WebSphere MQ.
Check your IBM documentation for details.
|
Application Monitoring |
-
As a general prerequisite: EntireX components of version 9.0 or above.
-
Natural RPC supports application monitoring with Natural Version
6.3.14 or above. To enable application monitoring for
Natural RPC, install the appropriate Natural version.
|
BS2000/OSD Prerequisites
Component |
Prerequisites |
COBOL Wrapper |
-
To compile the sources generated by the EntireX Workbench
component COBOL Wrapper: the IDL types U or UV require a compiler that
supports COBOL data type NATIONAL, for example COBOL2000 V01.4B00, otherwise
any ILCS-enabled COBOL compiler on BS2000/OSD.
|
C Wrapper |
|
z/VSE Prerequisites
Note:
The supported versions of CICS are listed under Product Compatibility for IBM Platforms on the Software AG Corporate Website.
Component |
Prerequisites |
Broker Kernel |
-
The installation data sets require 60 MB on a 3390 disk.
-
CSI's TCP/IP for z/VSE Version 1.5F and/or BSI's TCP/IP for z/VSE Version 2.5.3 or above.
-
The minimum partition size for running EntireX Broker is approx. 45 MB,
using the parameter values as supplied.
By default, EntireX Broker uses DYNAMIC-MEMORY-MANAGEMENT , which means that the partition size
corresponds to the load EntireX Broker can handle. When running with ICU-CONVERSION ,
an additional 16 MB are required above the 16 MB line.
The recommended partition size is at least 100 MB.
|
Broker Stubs and RPC Servers |
|
Security |
|
COBOL Wrapper |
|
Application Monitoring |
-
As a general prerequisite: EntireX components of version 9.0 or above.
-
Natural RPC supports application monitoring with Natural Version
8.2.4 or above in all supported Natural environments. To enable
application monitoring for Natural RPC with Natural Version 8.2.3, install the required load fix
for the appropriate Natural version: Natural Version 8.2.3 for Mainframes
with Zap NA93143 and with
Natural RPC Version 8.2.3.2 as delivered with Natural Version 8.2.3 L002 for
Mainframes.
|
IBM i Prerequisites
Component |
Prerequisites |
Broker Stubs |
-
Controller that supports TCP/IP protocol.
-
Any IBM i ILE-enabled programming language.
-
TCP/IP connection to an EntireX Broker kernel on a z/OS, UNIX or Windows platform.
-
About 16 MB of disk space for the Broker stub installation and about
50 MB for the RPC server installation.
-
Each process that includes the Broker stub occupies one additional
MB of virtual memory.
|
COBOL Wrapper |
|
IDL Extractor for Natural |
-
To extract from IBM i, the Natural RPC server must be prepared to
work together with the IDL Extractor for Natural. See Natural RPC Server Configuration for the IDL Extractor for Natural. If extracted from objects, there is no
support of the IDL Extractor for Natural for the following features:
-
Optional replacement of special characters ('#', '$', '&', '/','§') in parameter names by underscore for source or object
extraction. See Step 5: Select Natural Subprograms from RPC Environment under Using the Software AG IDL Extractor for Natural
-
Extracting an IDL from sources and objects for
-
Natural V-arrays (Natural syntax: A100/1:V). They are mapped to IDL unbounded arrays.
-
Combinations of Natural X-array dimensions together with Natural V-array dimensions (Natural syntax: A100/1:*,1:V) are now
supported. They are mapped to IDL unbound end arrays.
|
OpenVMS Prerequisites
Component |
Prerequisites |
Broker Stubs |
|
z/VM Prerequisites
Component |
Prerequisites |
Broker Stubs |
-
Virtual Storage The z/VM Broker stub runs within an IBM Language Environment
enclave. This means that if the calling program is not an IBM Language
Environment, program an enclave will be automatically created, invisible to the
application. However, you must allow sufficient virtual storage to allow the
Language Environment enclave to be created. A storage size of 16 MB is
recommended.
-
ESIZE When using SYSETB under z/VM you must allow sufficient ESIZE. We
recommend setting ESIZE=64 KB.
|
Application Server Prerequisites
The Web application components of EntireX (XML/SOAP Listener,
XML/SOAP Runtime, Wrapper for EJB runtime) support J2EE 1.5.
They should therefore run on any Java application server that supports J2EE 1.5.
The EntireX components have been tested on the application server provided with the Software AG Runtime.
Supported LDAP Servers
The following LDAP servers are currently supported by EntireX:
-
IBM Tivoli Directory Server 6
-
Microsoft Active Directory Domain Services
-
Novell eDirectory 8
-
OpenLDAP 2
-
Apache Directory Server 1.5