EntireX Version 9.7 SEARCH   CONTENTS   |   PDF PAGE   PDF BOOKS   |   HOME   UP   PREV   NEXT
 —  Reliable RPC  —

Reliable RPC for C Wrapper

Writing a Client

This section shows a reliable RPC client for CLIENT_COMMIT mode. All methods for reliable RPC are defined in erx.h. The methods applicable to reliable RPC as described under API Function Descriptions for Reliable RPC are:

The example below is included as source in directory examples/ReliableRPC/CClient.

Step 1: Base Declarations Required by the C Wrapper

Step 1a: Include the Generated Header File

Define the generated client header file. This header file includes the RPC runtime header file erx.h and defines structures and prototypes for your RPC messages. 

/* include generated header file */
#include "cmail.h"

Step 1b: Define Global Variables to Communicate with the Client Interface Objects

/* Required global variables for the CLIENT interface */
ERXeReturnCode             ERXrc;
ERX_CLIENT_IDENTIFICATION  ERXClient;
ERX_SERVER_ADDRESS         ERXServer;
ERX_SERVER_ADDRESS         ERXServerDefault;
ERXCallId                  ERXCallID;
ERX_ERROR_INFO             ERXErrorInfo;

Step 2: Required Settings for the C Wrapper

Step 2a: Identify the User with a Broker User ID

For implicit broker logon, if required in your environment, the client password can be given here. It is provided then through the RPC interface object call. 

/* set client identification */
memset( &ERXClient, 0, sizeof(ERXClient) );
strcpy( (char*) ERXClient.szUserId, "ERX-USER" );
strcpy( (char*) ERXClient.szPassword, "ERX_PASS");

Step 2b: Set the Broker and Service to be Called

Your application will wait a maximum of 55 seconds for a server response. If the server does not answer within this period, the broker gives your program control again with an error code 00740074. 

ERXServer.Medium = ERX_TM_BROKER_LIBRARY;
ERXServer.ulTimeOut = 55;

/* set Broker-Id, server-name, class-name and service-name */
strcpy( (char*) ERXServer.Address.BROKER.szEtbidName,   "ETB001" );
strcpy( (char*) ERXServer.Address.BROKER.szServerName,  "SRV1" );
strcpy( (char*) ERXServer.Address.BROKER.szClassName,   "RPC" );
strcpy( (char*) ERXServer.Address.BROKER.szServiceName, "CALLNAT" );

Step 3: Register with the RPC Runtime

As a general rule, you have to register the RPC runtime before you use it. After registration, the RPC runtime holds information on a per-thread basis. See also Using the RPC Runtime. 

/* register to the RPC runtime */
ERXrc = ERXRegister(ERX_CURRENT_VERSION );
If ( ERX_FAILED( ERXrc ) )
{
/* code for  error handling */
}

Step 4: Broker Logon

We logon by EntireX Broker.

/* Logon to EntireX Broker Middleware */
ERXrc = ERXLogon( &ERXClient,
                   ERXServer.Address.BROKER_Library.szEtbidName );
if(ERX_FAILED(ERXrc))
{  
/* code for  error handling */
}

Step 5: Set Reliable-State

Before reliable RPC can be used, the reliable state must be set to either ERX_RELIABLE_CLIENT_COMMIT or ERX_RELIABLE_AUTO_COMMIT. 

/* Set reliable RPC state to client commit */
ERXrc = ERXSetReliableState(ERX_RELIABLE_CLIENT_COMMIT);
if( ERX_FAILED(ERXrc) ) 
{
/* code for  error handling */
}

Step 6: Send the RPC Message

The RPC interface object SENDMAIL is called as a C procedure. See Calling Servers as Procedures or Functions. 

/* do the remote procedure call */
SENDMAIL( gTo, gSubject, gText);

Step 7: Get the Reliable RPC Message ID

Get the reliable RPC message ID before you commit any reliable RPC messages, otherwise the reliable ID will be lost and checking for the RPC message status will not be possible. 

/* Get the reliable ID */
ERXrc = ERXGetReliableID( &ERXServer, pReliableID );
if( ERX_FAILED(ERXrc) ) 
{
/* code for  error handling */
}

Step 8: Check the Reliable RPC Message Status

After the reliable RPC message ID has been got, you can query the status of the reliable RPC message. This is a separate call independent of any reliable RPC messages, so we use the default server connection (ERXServerDefault). Valid reliable RPC message states can be found in header file etbcdef.h. See Broker ACI Control Block Definition.

See Using Persistence and Units of Work, Understanding UOW Status and Broker UOW Status Transition in the Platform-independent Administration documentation for more information. 

/* Check the reliable RPC message status */
ERXrc = ERXGetReliableStatus( &ERXClient, 
                              &ERXServerDefault, 
                              pReliableID, 
                              pReliableStatus );
if( ERX_FAILED(ERXrc) ) 
{
/* code for  error handling */
}

Step 9: Send a Second RPC message

Send a second reliable RPC message.

/* do the remote procedure call */
SENDMAIL( gTo, gSubject, gText);

Step 10: Commit Both Reliable RPC Messages

Now we commit both reliable RPC messages. This will deliver all reliable RPC messages to the server if it is available. 

/* Commit all made reliable RPC messages */
ERXrc = ERXReliableCommit( &ERXServer );
if( ERX_FAILED(ERXrc) ) 
{
/* code for  error handling */
}

Step 11: Reset ERX_SERVER_ADDRESS

For reliable RPC, the ERX_SERVER_ADDRESS will be overwritten by the RPC runtime, so it is necessary to reset the ERX_SERVER_ADDRESS structure with the required values. 

/* 
 * After a ERXReliableCommit we have to use a new server connection 
 * so we restore our default server connection for further calls.
 */
memcpy(&ERXServer, &ERXServerDefault, sizeof(ERX_SERVER_ADDRESS));

Step 12: Check the Reliable RPC Message Status

To determine that reliable RPC messages are delivered, we query the reliable RPC message status again. See also Step 8 above. 

 
      
      
      

      
Step 13: Send a Third RPC message

      
      
      
Send a third reliable RPC message.
 
      
/* do the remote procedure call */
SENDMAIL( gTo, gSubject, gText);
 
      
      
      

      
Step 14: Get the Reliable RPC Message ID

      
      
      
Get the reliable RPC message ID. 
         See also Step 7.
      
 
      
/* Get the reliable ID */
ERXrc = ERXGetReliableID( &ERXServer, pReliableID );
if( ERX_FAILED(ERXrc) ) 
{
/* code for  error handling */
}
 
      
      
      

      
Step 15: Check the Reliable RPC Message Status

      
      
      
After the reliable RPC message ID has been got, query the status of the
            reliable RPC message again.
      
 
      
/* Check the reliable RPC message status */
ERXrc = ERXGetReliableStatus( &ERXClient, 
                              &ERXServerDefault, 
                              pReliableID, 
                              pReliableStatus );
if( ERX_FAILED(ERXrc) ) 
{
/* code for  error handling */
}
 
      
      
      

      
Step 16: Roll back the Third Message

      
      
      
Roll back the current reliable RPC message.
 
      
/* Roll back Message 3 */
ERXrc = ERXReliableRollback( &ERXServer );
if( ERX_FAILED(ERXrc) ) 
{
/* code for  error handling */
}
 
      
      
      

      
Step 17: Check the Reliable RPC Message Status

      
      
      
After rolling back the reliable RPC message, query the status of the
            reliable RPC message.
      
 
      
/* Get the reliable RPC message status */
ERXrc = ERXGetReliableStatus( &ERXClient, 
                              &ERXServerDefault, 
                              pReliableID, 
                              pReliableStatus );
if( ERX_FAILED(ERXrc) ) 
{
/* code for  error handling */
}
 
      
      
      

      
Step 18: Broker Logoff

      
      
      
Log off from EntireX Broker.
 
      
/* Logoff from EntireX Broker Middleware */
ERXrc = ERXLogoff( &ERXClient, 
                    ERXServerDefault.Address.BROKER_Library.szEtbidName );
if ( ERX_FAILED( ERXrc ) )
{
/* code for  error handling */
}
 
      
      
      

      
Step 19: Deregister with the RPC Runtime

      
      
      
As a general rule, after using the RPC runtime you should unregister from
            it. This will free all resources held by the RPC runtime for the caller. See
            Using the RPC Runtime for more information. 
      
 
      
/* unregister to the RPC runtime */
ERXUnregister();
 
        
      
      
       
      

         
Top of page

      

      

      
Writing a Client using AUTO COMMIT
 
        
        
      
This section gives some hints for reliable RPC AUTO_COMMIT mode. It is not
            a complete example and shows only the correct order of reliable RPC method
            calls. The reliable ID to check the message status must be retrieved
            immediately after the reliable RPC message is sent and before any other RPC
            runtime calls - otherwise the reliable ID is lost and retrieving the message
            status is not possible.
      
 
        
/* Initialize pERXServer */
...

/* 
 * After initializing pERXServer  with your connection settings (broker ID,  
 * server-name, class-name, service-name) create a copy of it 
 * (pERXDefaultServer). Use this copy to resolve the reliable status after  
 * a reliable RPC message. 
 */
memcpy(pERXServer, pERXDefaultServer, sizeof(ERX_SERVER_ADDRESS));

...

/* Set reliable state to AUTO_COMMIT */
ERXSetReliableState( ERX_RELIABLE_AUTO_COMMIT );

...



/* reliable RPC message 1 */
SENDMAIL( gTo, gSubject, gText );
/* 
 * The reliable ID must be resolved directly 
 * after a reliable RPC message
 */
ERXGetReliableID( pERXServer, pReliableID );



...

/* Resolve the reliable status */
ERXGetReliableStatus( pERXClient, pERXDefaultServer, pReliableID,           
                      pReliableStatus );

...

/* For a second AUTO_COMMIT RPC message, use a new server connection */
memcpy(pERXServer, pERXDefaultServer, sizeof(ERX_SERVER_ADDRESS));

...

/* reliable RPC message 2 */
SENDMAIL( gTo, gSubject, gText );
/* 
 * The reliable ID must be resolved directly 
 * after a reliable RPC message
 */
ERXGetReliableID( pERXServer, pReliableID );


...

/* Resolve the reliable status */
ERXGetReliableStatus( pERXClient, pERXDefaultServer, pReliableID, 
                      pReliableStatus );

...
 
       
      
        
      

         
Top of page

      

      

      
Writing a Server
 
        
        
      
There are no server-side methods for reliable RPC. The server does not
            send back a message to the client. The server can run deferred, thus client and
            server do not necessarily run at the same time. If the server fails, it returns
            an error code greater than zero. This causes the transaction (unit of work
            inside the Broker) to be cancelled, and the error code is written to the user
            status field of the unit of work.
      
 
        
      
For writing reliable RPC servers, see Using the C Wrapper for the Server Side (z/OS, UNIX, Windows, BS2000/OSD, IBM i).
      
 
      
      
To execute a reliable RPC service with an RPC server, the parameter 
         logon must be set to YES, see
         Configuring the RPC Server in the EntireX BS2000/OSD administration documentation or Configuring the RPC Server under
         UNIX |
         Windows

        
      
       
       
      

         

            
Top of page

            

               
               
               
               

                   www.softwareag.com 
                  
                  Copyright © 1997-2014 Software AG, Darmstadt, Germany.  
                  SEARCH
                       CONTENTS   |
                       PDF PAGE
                       PDF BOOKS   |
                       HOME
                       UP
                       PREV
                       NEXT