Version 9.6
 —  System Management Hub  —

SNMP Support for EntireX

EntireX uses the SNMP (Simple Network Management Protocol) interface of the System Management Hub. The configuration of the SNMP interface is described in detail in the section SNMP Add-on Interface in the separate System Management Hub documentation.

This document covers the following topics:


Installation

The SNMP Add-on interface is installed while installing the System Management Hub. The System Management Hub is installed or updated with EntireX. The additional MIB files for EntireX will be installed into the EntireX installation directory. For the location of the MIB files, see Loading EntireX MIBs below. The SNMP interface will be setup on the default SMH SNMP port.

Notes:

  1. See section SNMP Add-on Interface in the separate System Management Hub documentation for information on the default port and on how to change the settings of the SNMP interface.
  2. As a minimum, the TRAP destination should be checked and set up for your environment.

Top of page

SNMP Functionality

EntireX uses the System Management Hub, in particular the SNMP plug-in of the System Management Hub, to provide SNMP functionality. The two types of file required, MIB and XML2MIB, are located in the EntireX installation directory. See Loading EntireX MIBs.

The MIB (Management Information Base) files contain the definitions required for the third-party SNMP Management Tool. The XML2MIB files contain the required definitions of the internal tables for the System Management Hub SNMP plug-in and are the SMH complements to the MIB files. The SMH internal tables are used to buffer the information temporarily.

The System Management Hub SNMP plug-in will refresh these internal tables by default every 65 seconds. The refresh timeout can be adjusted in the SMH settings. The internal tables are also required to generate a trap notification. The System Management Hub SNMP plug-in compares the values defined in the XML2MIB files with the changes to these values, and automatically generates a trap notification if a specified condition occurs.

During the refresh cycle, the SNMP plug-in calls the EntireX System Management Hub agents to retrieve the required information from the EntireX components. Currently SNMP functionality is provided for the following EntireX components.

smh_snmp

Currently only SNMP monitoring functionality is supported. Use of the SNMP command SetRequest to change an object value is not supported. See section SNMP Add-on Interface in the separate System Management Hub documentation for futher information. Use the SMH GUI to set or change any properties for the managed component.

Top of page

Activating SNMP Support for EntireX

Start of instruction setTo activate SNMP support for EntireX

  1. Import the Software AG EntireX MIB files to your SNMP Manager Tool.

    Under Windows: <drive>:\SoftwareAG\EntireX\smh\snmp\mib

    Under UNIX: /opt/softwareag/EntireX/smh/snmp/mib

  2. Set up your SNMP Manager Tool (SMH uses UDP port 9903 by default).

    The SNMP port may be changed by the user during installation. Verify these setting in the System Management Hub settings.

  3. Switch on SNMP support for EntireX. See Enabling SNMP Functionality.

  4. Restart SMH services/daemons.

  5. For EntireX Broker only:

    Enter a user and password for each broker for which SNMP support is to be enabled. See Enabling the SNMP Plug-in in Broker Administration using System Management Hub under UNIX | Windows.

Top of page

Enabling SNMP Functionality

SNMP support for EntireX is switched off by default after the installation. If you need SNMP support, enable it using the steps below.

Start of instruction setTo enable or disable SNMP support

  1. Log on to the System Management Hub and select the root node of EntireX.

  2. From the context menu, choose Settings.

  3. Check the check box to enable SNMP support, and clear it to disable SNMP support.

    SNMP support

  4. Choose OK to submit changes. If the check box is not visible, check whether System Management Hub SNMP support has been enabled. (See note below).

  5. For EntireX Broker, the SNMP plug-in must be enabled individually for each broker before it can be administered by SNMP. See Enabling the SNMP Plug-in in Broker Administration using System Management Hub under UNIX | Windows for more details.

    Changes will become active when your system or System Management Hub services are restarted.

Note:
If System Management Hub's SNMP support has been disabled, the EntireX's SNMP support will also be disabled. If this is the case, the message and check box Enable SNMP for EntireX in the screenshot above will be replaced by the message: "The SNMP features in SMH are disabled". See the separate System Management Hub documentation.
Similarly, if you do not have a valid license, the message and check box above will be replaced by the message: "The EntireX XML license key file does not contain a license for SNMP".

Top of page

Loading EntireX MIBs

EntireX MIBs are provided with the EntireX.

Under Windows: <drive>:\SoftwareAG\EntireX\smh\snmp\mib

Under UNIX: /opt/softwareag/EntireX/smh/snmp/mib

Compile and load the MIB files into your SNMP management tool. If required, copy these files into the directory of your SNMP management tool. The MIB file SOFTWAREAG-EXXnnn-GLOBAL.MIB has global definitions for all EntireX SNMP MIBs.

Note:
In the example above, nnn in the global MIB file refers to the first three digits of the EntireX Version.

Top of page

Object ID

The EntireX Object ID (OID) is below the public Software AG Object ID.

EntireX OID looks like this:

iso(1).org(3).dod(6).internet(1).private(4).enterprise(1).softwareag(1028).softwareagProducts(3).exx(2)

The following diagrams provide more detailed information on the OID tree. The MIB files provided for EntireX are designed for the Version 2c of the Simple Network Management Protocol (SNMPv2).

EntireX imports the following predefined standard definitions:

Your SNMP management tool must provide these standard definitions.

Top of page

SNMP Support for Broker

The Broker SNMP MIB file defines some of the imported basic properties. The SNMP table shows these properties for each Broker that has been entered in the SMH GUI. For each table entry, the System Management Hub adds an extension to the OID prefix.

  1. exxetbEntry (1.3.6.1.4.1.1028.3.2.4.3.1.1.1)

    Property Description OID Prefix
    exxetbBrokerName The Name of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.1.1.1.1
    exxetbBrokerStatus Status of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.1.1.1.2
    exxetbBrokerTCPPort TCP Port of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.1.1.1.3
    exxetbBrokerSSLPort SSL Port of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.1.1.1.4
    exxetbBrokerTransport Transport of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.1.1.1.5
    exxetbBrokerTraceLevel Trace Level of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.1.1.1.6
    exxetbBrokerSecurity Security of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.1.1.1.7
    exxetbBrokerAutoLogon Auto Logon of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.1.1.1.8
    exxetbBrokerServiceUpdate Service Update of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.1.1.1.9
    exxetbBrokerClientNonAct Client Nonact of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.1.1.1.10
  2. exxetbBrkrEntry (1.3.6.1.4.1.1028.3.2.4.3.2.1.1)

    Property Description OID Prefix
    exxetbBrkrBrokerName Broker name of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.2.1.1.2
    exxetbBrkrBrokerStatus Broker status of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.2.1.1.3
    exxetbBrkrPlatformName Broker platform name of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.2.1.1.4
    exxetbBrkrBrokerVersion Broker version of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.2.1.1.5
    exxetbBrkrRunTime Broker runtime of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.2.1.1.6
    exxetbBrkrNumWorker Broker number of worker of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.2.1.1.7
    exxetbBrkrTraceLevel Broker trace level of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.2.1.1.8
    exxetbBrkrLongMsgBufNum Broker number of long message Buffer of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.2.1.1.9
    exxetbBrkrLongMsgBufLen Broker length of long message buffer of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.2.1.1.10
    exxetbBrkrLongMsgBufActive Broker active long message buffer of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.2.1.1.11
    exxetbBrkrLongMsgBufHigh Broker high watermark of long message buffer of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.2.1.1.12
    exxetbBrkrShortMsgBufNum Broker number of short message buffer of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.2.1.1.13
    exxetbBrkrShortMsgBufLen Broker length of short message buffer of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.2.1.1.14
    exxetbBrkrShortMsgBufActive Broker active short message buffer of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.2.1.1.15
    exxetbBrkrShortMsgBufHigh Broker high watermark of short message buffer of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.2.1.1.16
    exxetbBrkrServiceNum Broker number of service of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.2.1.1.17
    exxetbBrkrServiceActive Broker active service of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.2.1.1.18
    exxetbBrkrServerNum Broker number of server of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.2.1.1.19
    exxetbBrkrServerActive Broker active server of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.2.1.1.20
    exxetbBrkrServerHigh Broker high watermark of server of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.2.1.1.21
    exxetbBrkrClientsNum Broker number of clients of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.2.1.1.22
    exxetbBrkrClientsActive Broker active clients of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.2.1.1.23
    exxetbBrkrClientsHigh Broker high watermark of clients of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.2.1.1.24
    exxetbBrkrConversationNum Broker number of conversation of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.2.1.1.25
    exxetbBrkrConversationHigh Broker high watermark of conversation of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.2.1.1.26
    exxetbBrkrUOWMax Broker maximum of unit of work of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.2.1.1.27
    exxetbBrkrUOWMsgs Broker unit of work messages of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.2.1.1.28
    exxetbBrkrUOWTime Broker unit of work time of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.2.1.1.29
    exxetbBrkrUOWMaxMsg Broker maximum message of unit of work of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.2.1.1.30
    exxetbBrkrUOWActive Broker number of active unit of work of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.2.1.1.31
    exxetbBrkrUOWStore Broker unit of work store of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.2.1.1.32
    exxetbBrkrUOWPStore Broker unit of work persistence store of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.2.1.1.33
    exxetbBrkrUOWStatP Broker unit of work status of persistence of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.2.1.1.34
    exxetbBrkrUOWDeferred Broker unit of work deferred of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.2.1.1.35
    exxetbBrkrUOWStatAddTime Broker unit of work status additional time of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.2.1.1.36
    exxetbBrkrAccounting Broker accounting of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.2.1.1.37
    exxetbBrkrNewUOWMsg Broker new unit of work message of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.2.1.1.38
    exxetbBrkrPStoreType Broker persistence store type of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.2.1.1.39
    exxetbBrkrPublishAndSubscribe Broker publish and subscribe of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.2.1.1.40
    exxetbBrkrTopic Broker topic of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.2.1.1.41
    exxetbBrkrTopicActive Broker topic active of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.2.1.1.42
    exxetbBrkrSubscriber Broker subscriber of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.2.1.1.43
    exxetbBrkrSubscriberActive Broker subscriber active of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.2.1.1.44
    exxetbBrkrSubscriberHigh Broker subscriber high of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.2.1.1.45
    exxetbBrkrPublisher Broker publisher of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.2.1.1.46
    exxetbBrkrPublisherActive Broker publisher active of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.2.1.1.47
    exxetbBrkrPublisherHigh Broker publisher high of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.2.1.1.48
    exxetbBrkrPublication Broker publication of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.2.1.1.49
    exxetbBrkrublicationHigh Broker publication high of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.2.1.1.50
  3. exxetbWrkr Entry (1.3.6.1.4.1.1028.3.2.4.3.3.1.1)

    Property Description OID Prefix
    exxetbWrkrBrokerName Broker Name of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.3.1.1.2
    exxetbWrkrBrokerStatus Broker Status of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.3.1.1.3
    exxetbWrkrNumber Worker Number of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.3.1.1.4
    exxetbWrkrStatus Worker Status of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.3.1.1.5
    exxetbWrkrCalls Worker Calls of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.3.1.1.6
    exxetbWrkrIdleTime Worker Idle Time of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.3.1.1.7
  4. exxetbSrvcEntry (1.3.6.1.4.1.1028.3.2.4.3.4.1.1)

    Property Description OID Prefix
    exxetbSrvcBrokerName Broker name of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.4.1.1.2
    exxetbSrvcBrokerStatus Broker status of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.4.1.1.3
    exxetbSrvcServerName Server Name of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.4.1.1.4
    exxetbSrvcServerClass Server Class of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.4.1.1.5
    exxetbSrvcService Service of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.4.1.1.6
    exxetbSrvcTranslation Service translation of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.4.1.1.7
    exxetbSrvcActiveServers Service active Servers of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.4.1.1.8
    exxetbSrvcConvsActive Service conversations (active) of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.4.1.1.9
    exxetbSrvcConvsHigh Service conversations (high) of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.4.1.1.10
    exxetbSrvcServiceNonact Service nonactive of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.4.1.1.11
    exxetbSrvcLongBuffsActive Service long buffers (active) of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.4.1.1.12
    exxetbSrvcLongBuffsHigh Service long buffers (high) of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.4.1.1.13
    exxetbSrvcShortBuffsActive Service short buffers (active) of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.4.1.1.14
    exxetbSrvcShortBuffsHigh Service short buffers (high) of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.4.1.1.15
    exxetbSrvcWaits Service waits of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.4.1.1.16
    exxetbSrvcOccupied Service occupied of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.4.1.1.17
    exxetbSrvcConvPending Service conversation pending of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.4.1.1.18
    exxetbSrvcConvPendHigh Service conversion pending high of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.4.1.1.19
    exxetbSrvcRequests Service request of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.4.1.1.20
    exxetbSrvcMaxUOWs Service maximum UOWs of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.4.1.1.21
    exxetbSrvcMaxMsg Service maximum message of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.4.1.1.22
    exxetbSrvcUOWLifeTime Service UOW lifetime of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.4.1.1.23
    exxetbSrvcMaxDelCount Service maximum delivery count of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.4.1.1.24
    exxetbSrvcMsgSize Service maximum message size of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.4.1.1.25
    exxetbSrvcActiveUOWs Service active UOWs of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.4.1.1.26
    exxetbSrvcStore Service store of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.4.1.1.27
    exxetbSrvcLifeTimeMult Service lifetime multiple of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.4.1.1.28
    exxetbSrvcDeferred Service deferred of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.4.1.1.29
    exxetbSrvcAttachManagersActive Service attach managers active of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.4.1.1.30
    exxetbSrvcUwStatAddTime Service UOW status additioanl time of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.4.1.1.31
  5. exxetbSrvrEntry (1.3.6.1.4.1.1028.3.2.4.3.5.1.1)

    Property Description OID Prefix
    exxetbSrvrBrokerName Broker name of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.5.1.1.2
    exxetbSrvrBrokerStatus Broker status of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.5.1.1.3
    exxetbSrvrUserID Server user ID of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.5.1.1.4
    exxetbSrvrToken Server class of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.5.1.1.5
    exxetbSrvrInternalID Server internal ID of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.5.1.1.6
    exxetbSrvrStatus Server status of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.5.1.1.7
    exxetbSrvrConv Server conversation of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.5.1.1.8
    exxetbSrvrServerName Server name of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.5.1.1.9
    exxetbSrvrServerClass Server class of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.5.1.1.10
    exxetbSrvrService Server Service of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.5.1.1.11
    exxetbSrvrCharSet Server character set of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.5.1.1.12
    exxetbSrvrActiveConv Server active conversation of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.5.1.1.13
    exxetbSrvrActiveServices Server active services of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.5.1.1.14
    exxetbSrvrLastActive Server last active of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.5.1.1.15
    exxetbSrvrServerNonact Server nonactive of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.5.1.1.16
    exxetbSrvrNew Server new of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.5.1.1.17
    exxetbSrvrNewTotal Server new (total) of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.5.1.1.18
    exxetbSrvrNewAvg Server new (avg.) of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.5.1.1.19
    exxetbSrvrOld Server old of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.5.1.1.20
    exxetbSrvrOldTotal Server old (total) of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.5.1.1.21
    exxetbSrvrOldAvg Server old (avg.) of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.5.1.1.22
    exxetbSrvrWaits Server waits of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.5.1.1.23
    exxetbSrvrWaitsTotal Server waits (total) of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.5.1.1.24
    exxetbSrvrWaitsAvg Server waits (avg.) of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.5.1.1.25
    exxetbSrvrSumConvs Server sum conversations of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.5.1.1.26
    exxetbSrvrActiveUOWs Server active UOWs of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.5.1.1.27
    exxetbSrvrRecvOption Server receive option of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.5.1.1.28
    exxetbSrvrAttachManager Server attach manager of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.5.1.1.29
    exxetbSrvrIpAddress Server IP address of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.5.1.1.30
    exxetbSrvrHostName Server host name of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.5.1.1.31
  6. exxetbClntEntry (1.3.6.1.4.1.1028.3.2.4.3.6.1.1)

    Property Description OID Prefix
    exxetbClntBrokerName Broker name of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.6.1.1.2
    exxetbClntBrokerStatus Broker status of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.6.1.1.3
    exxetbClntUserID Client user ID of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.6.1.1.4
    exxetbClntToken Client token of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.6.1.1.5
    exxetbClntInternalID Client internal ID of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.6.1.1.6
    exxetbClntStatus Client status of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.6.1.1.7
    exxetbClntConv Client conversation of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.6.1.1.8
    exxetbClntServerName Client server name of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.6.1.1.9
    exxetbClntServerClass Client server class of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.6.1.1.10
    exxetbClntService Client Service of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.6.1.1.11
    exxetbClntCharSet Client character set of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.6.1.1.12
    exxetbClntConvsActive Client active conversation of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.6.1.1.13
    exxetbClntLastActive Client last active of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.6.1.1.14
    exxetbClntClientNonact Client nonactive of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.6.1.1.15
    exxetbClntWaits Client waits of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.6.1.1.16
    exxetbClntWaitsTotal Client waits (total) of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.6.1.1.17
    exxetbClntWaitsAvg Client waits (avg.) of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.6.1.1.18
    exxetbClntSumConvs Client sum conversations of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.6.1.1.19
    exxetbClntActiveUOWs Client active UOWs of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.6.1.1.20
  7. exxetbConvEntry (1.3.6.1.4.1.1028.3.2.4.3.7.1.1)

    Property Description OID Prefix
    exxetbConvBrokerName Broker name of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.7.1.1.2
    exxetbConvBrokerStatus Broker status of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.7.1.1.3
    exxetbConvNumbActiveConv Number of EntireX Broker active conversations 1.3.6.1.4.1.1028.3.2.4.3.7.1.1.4
  8. exxetbPsEntry (1.3.6.1.4.1.1028.3.2.4.3.8.1.1)

    Property Description OID Prefix
    exxetbPsBrokerName Broker name of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.8.1.1.2
    exxetbPsBrokerStatus Broker status of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.8.1.1.3
    exxetbPsNumReceived Persistent store number of Received status of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.8.1.1.4
    exxetbPsNumAccepted Persistent store number of Accepted status of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.8.1.1.5
    exxetbPsNumDelivered Persistent store number of Delivered status of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.8.1.1.6
    exxetbPsNumBackedOut Persistent store number of Backed Out status of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.8.1.1.7
    exxetbPsNumProcessed Persistent store number of Processed status of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.8.1.1.8
    exxetbPsNumCancelled Persistent store number of Cancelled status of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.8.1.1.9
    exxetbPsNumTimedOut Persistent store number of Timed Out status of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.8.1.1.10
    exxetbPsNumDiscarded Persistent store number of Discarded status of the EntireX Broker 1.3.6.1.4.1.1028.3.2.4.3.8.1.1.11

Top of page

SNMP TRAP for the Broker

The TRAPs will be sent to the TRAP destination which is setup in the SMH configuration.

The TRAP exxetbBrokerStart will be sent if the Broker changes its status from "Not Running" (DOWN) to another status. The TRAP OID for this event is 1.3.6.1.4.1.1028.3.2.4.3.1.255.0.1. The parameter is the name of the Broker for which this TRAP has been sent.

The TRAP exxetbBrokerStop will be sent if the Broker Agent changes its status from "Running" (UP) to another status. The TRAP OID for this event is 1.3.6.1.4.1.1028.3.2.4.3.1.255.0.2. The parameter is the name of the Broker for which this TRAP has been sent.

Top of page

SNMP Support for RPC Server

The RPC SNMP MIB file defines some of the imported basic properties. The SNMP table shows these properties for each RPC Server that has been entered into the System Management Hub GUI. The values for the properties RPC Server Name and RPC Server Status are always significant. If the RPC server has the status Down, the values for the properties RPC Server Started, RPC Server Worker, RPC Server High, RPC Server Host and RPC Server Address are irrelevant. For each table entry, the System Management Hub adds an extension to the OID prefix.

Property Description OID Prefix
exxsdkRPCServerName The Name of the RPC server, defined in SMH GUI 1.3.6.1.4.1.1028.3.2.4.1.2.1.2
exxsdkRPCServerStatus Status of the Server
Running, Down, Retry (see notes 1, 2)
1.3.6.1.4.1.1028.3.2.4.1.2.1.3
exxsdkRPCServerStarted Start Time of the RPC Server 1.3.6.1.4.1.1028.3.2.4.1.2.1.4
exxsdkRPCServerWorker Current number of worker threads 1.3.6.1.4.1.1028.3.2.4.1.2.1.5
exxsdkRPCServerHigh Worker threads high watermark 1.3.6.1.4.1.1028.3.2.4.1.2.1.6
exxsdkRPCServerName Host name /JES job name (see note 3) 1.3.6.1.4.1.1028.3.2.4.1.2.1.7
exxsdkRPCServerAddress Network address (see note 4) 1.3.6.1.4.1.1028.3.2.4.1.2.1.8

Notes:

  1. The status may be "Init" and "Shutdown" for the XML Servers. The status "Down" will be generated in the System Management Hub RPC server agent if communication with the RPC server is not available.

  2. Status Description
    Running The server is running normally.
    Down The server is not running or the RPC server was started without the System Management Hub control port option. The System Management Hub RPC server agent cannot connect to the RPC Server.
    Retry The RPC server has no connection to the Broker and is trying to connect or reconnect.
    Init The RPC server is just starting and is not yet ready on the RPC interface.
    Shutdown The RPC server is just shutting down and will be down in a moment.
    Error Any error that could not be recovered and leads to shutdown of the server, for example: 0021 0043: ATTR: Service definition not found.
  3. This display depends on the RPC Server and the platform where the server is running. On UNIX and Windows (local servers) only the Hostname will be displayed. Under IBM i, the RPC Server will also display the JES job name if available.

  4. This display shows the IP or Entire Net-Work address of the RPC Server where the server is running.

See also Select Root Node of the RPC Server in Operating and Monitoring the RPC Servers using System Management Hub under UNIX | Windows.

SNMP support for the RPC Server also provides SNMP TRAPs to indicate a status change from Down to another status, and a status change from any other status to Down.

Top of page

SNMP TRAP for the RPC Server

TRAPs are sent to the TRAP destination which is setup in the SMH configuration.

The TRAP exxsdkRPCServerStart will be sent if the RPC server changes its status from Down to another status. The TRAP OID for this event is 1.3.6.1.4.1.1028.3.2.4.1.2.255.0.1. The parameter is the name of the RPC Server for which this TRAP has been sent. The status of the RPC Server can also be something other than Running if this TRAP has been sent. The condition for this TRAP is satisfied if the status is not Down.

The TRAP exxsdkRPCServerStop will be sent if the RPC server changes its state from any status to the status Down. The TRAP OID for this event is 1.3.6.1.4.1.1028.3.2.4.1.2.255.0.2. The parameter is the name of the RPC Server for which this TRAP has been sent.

Top of page