The EntireX CICS® ECI RPC Server allows standard RPC clients to communicate with CICS programs running on IBM CICS® version 3.2 and higher. The CICS ECI RPC Server transforms the RPCs from the clients into messages to CICS ECI. The CICS ECI RPC Server acts on one side as an RPC server and on the other side as a client for CICS ECI. The CICS ECI RPC Server is a Java-based component that can run on a different host to the one where CICS is running. This allows it to operate with a zero footprint of EntireX on the CICS host.
This document covers the following topics:
For the setup of the CICS ECI RPC Server there are
a configuration file and
scripts to start the CICS ECI RPC Server.
The CICS ECI RPC Server is contained in the file entirex.jar.
The default name of the configuration file is entirex.cicseci.properties. The CICS ECI RPC Server searches for this file in the current working directory.
You can set the name of the configuration file with
-Dentirex.server.properties=<your file
name> with "/" as file separator.
The configuration file contains the configuration for both parts of the CICS ECI RPC Server.
To set up the CICS ECI RPC Server
Use the RPC server agent of the System Management Hub.
Add the CICS ECI RPC Server as an RPC server.
See Administering the EntireX RPC Servers using System Management Hub under UNIX | Windows for details.
Or:
Use the scripts to start the CICS ECI RPC Server.
Both scripts use the configuration file entirex.cicseci.properties in the folder etc.
If you configure more than one CICS ECI RPC Server that connect to the same EntireX Broker, the following items must be distinct:
the trace output file (property
entirex.server.logfile)
the monitor port for SMH (property
entirex.server.monitorport)
the log for the Windows Service (property
entirex.server.serverlog)
the trace output file of the SMH agent for RPC servers
The RPC server side of the CICS ECI RPC Server is configured like the Java RPC Server. The CICS ECI RPC Server uses the properties that start with "entirex.server".
The RPC server side can adjust the number of worker threads to the number
of parallel requests. Use the properties
entirex.server.fixedservers,
entirex.server.maxservers and
entirex.server.minservers to configure this
scalability.
If entirex.server.fixedservers=yes, the
number of entirex.server.minservers is started and
the server can process this number of parallel requests.
If entirex.server.fixedservers=no, the
number of worker threads balances between
entirex.server.minservers and
entirex.server.maxservers. This is done by a
so-called attach server thread. On startup, the number of worker threads is
entirex.server.minservers.
If more than entirex.server.minservers are
waiting for requests, a worker thread stops if its receive call times out. The
timeout period is configured with
entirex.server.waitserver.
Alternatively to the properties, you can use the command-line option. The command-line options have a higher priority than the properties set as Java system properties and these have higher priority than the properties in the configuration file.
| Name | Command-line Option | Default Value | Explanation | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
entirex.bridge.verbose |
no |
Verbose/trace mode of CICS ECI RPC Server. Set this to
"yes" to trace send to CICS ECI.
|
|||||||||||||||
entirex.server.brokerid |
-broker |
localhost |
Broker ID | ||||||||||||||
entirex.server.serveraddress |
-server |
RPC/SRV1/CALLNAT |
Server address. | ||||||||||||||
entirex.server.userid |
-user |
CICSECIRPCServer |
The user ID for the Broker for RPC. See entirex.server.password.
|
||||||||||||||
entirex.server.fixedservers |
no |
|
|||||||||||||||
entirex.server.minservers |
1 |
Minimum number of server threads. | |||||||||||||||
entirex.server.maxservers |
32 |
Maximum number of server threads. | |||||||||||||||
entirex.server.restartcycles |
-restartcycles |
15 |
Number of restart attempts if the Broker is not available. This can be used to keep the CICS ECI RPC Server running while the Broker is down for a short time. | ||||||||||||||
entirex.server.password |
-password |
The password for secured access to the Broker. The password is encrypted and written to the property entirex.server.password.e. To change the password, set the new password in the properties file (default is entirex.cicseci.properties). To disable password encryption set entirex.server.passwordencrypt=no. Default for
this property is "yes".
|
|||||||||||||||
entirex.server.security |
-security |
no |
no|yes|auto|name of BrokerSecurity
object
|
||||||||||||||
entirex.server.encryptionlevel |
0 |
Encryption level. Valid values: 0,1,2. | |||||||||||||||
entirex.server.compresslevel |
-compresslevel |
0 |
Permitted values (you can enter the text or the numeric value)
|
||||||||||||||
entirex.server.waitattach |
600S |
Wait timeout for the attach server thread. | |||||||||||||||
entirex.server.waitserver |
300S |
Wait timeout for the worker threads. | |||||||||||||||
entirex.timeout |
20 |
TCP/IP transport timeout. See Setting the Transport Timeout under Writing Advanced Applications - EntireX Java ACI. | |||||||||||||||
entirex.server.verbose |
-verbose |
no |
Verbose output to standard output yes/no. | ||||||||||||||
entirex.server.logfile |
-logfile |
Path and name of the trace output file. | |||||||||||||||
entirex.trace |
-trace |
0 |
Trace level (1,2,3). | ||||||||||||||
entirex.server.monitorport |
-smhport |
0 |
The port where the server listens for commands from the System Management Hub (SMH). If this port is 0, no port is used and management by the SMH is disabled. |
These properties are used to configure the connection to CICS ECI.
Alternatively, you can use the command-line option. The command-line options have a higher priority than the properties set as Java system properties and these have higher priority than the properties in the configuration file.
| Name | Default Value | Explanation |
|---|---|---|
cics.host |
Host name of CICS ECI. Mandatory. | |
cics.port |
Port number of CICS ECI. Mandatory. | |
cics.transaction |
Name of the CICS mirror transaction that will receive transactions. Mandatory. | |
entirex.bridge.targetencoding |
cp037 |
Specify the appropriate EBCDIC encoding used by your CICS ECI.
This codepage is also used when communicating with the EntireX Broker.
Note: Default " |
cics.sockettimeout |
10000 |
Socket timeout for connection to CICS ECI (in milliseconds). |
cics.userid |
RACF user ID. Maximum 8 bytes (optional). | |
cics.password |
RACF password/PassTicket. Maximum 8 bytes (optional). | |
cics.sslparams |
SSL parameters (optional). Same syntax as Broker ID. | |
cics.mapping.folder |
The folder where the server expects SVM files
(extension .svm). SVM files are generated by the
IDL Extractor for COBOL and COBOL Wrapper. See Server Mapping Deployment.
|
To start the CICS ECI RPC Server
Use the script cicseciserver in the folder bin to start the CICS ECI RPC Server. You may customize this file.
Or:
Use the RPC server agent in the System Management Hub to
configure and start the CICS ECI RPC Server.
See Administering the EntireX RPC Servers using System Management Hub under UNIX | Windows for details.
To stop the CICS ECI RPC Server
Use the RPC server agent in the SMH to stop the CICS ECI RPC Server.
Or:
Use the agent for the Broker. Use
Deregister on the service, specified with the
property entirex.server.serveraddress.
The application identification is sent from the CICS ECI RPC Server to the Broker. It is visible with Broker Command and Information Services.
The identification consists of four parts: name, node, type, and version. These four parts are sent with each Broker call and are visible in the trace information.
For the CICS ECI RPC Server, these values are:
| Identification Part | Value |
|---|---|
| Application name | ANAME=CICS ECI RPC Server |
| Node name | ANODE=<host name> |
| Application type | ATYPE=Java |
| Version | AVERS=9.5.0.0 |
