This document covers the following topics:
This table lists all Broker stubs available under BS2000/OSD that are to be used with the programming languages Assembler | C | COBOL | Natural | PL/I.
Note:
Use of the transport method NET will greatly improve performance when
running Broker kernel and applications on the same machine. We recommend using
the transport method NET for all local communication within BS2000/OSD. In
order to use the transport method NET for messages involving more than 32 KB,
you must install Adabas 8.1 cross-memory services. If you have not yet installed Adabas 8.1
cross-memory services, you can instead use TCP/IP to transport more than
32 KB of data.
When using Adabas 8.1.1 with any of the BS2000/OSD stubs to transport more than 32 KB of data, note the following:
Adabas/WAL 8.1 must be installed.
The Adabas/WAL 8.1 link routine must be used by the application or TP monitor.
Adabas/WAL 8.1 libraries must be used by the Broker kernel.
Adabas/WAL 8.1 libraries must be used by the Broker stubs.
The parameter
EXTENDED-ACB-SUPPORT
must be used for transmitting data from Adabas (NET).
Sufficient buffer space by IUBL,
NABS and NUM-COMBUF
must be specified.
The following stubs are available:
| Name | Environment | Supported Transport Method |
|---|---|---|
| BKIMBTIA | All environments that use batch or Dialog (formerly TIAM) | Adabas communication, SSL and TCP/IP |
| BROKER | All environments that use batch or Dialog (formerly TIAM) | Adabas communication, SSL and TCP/IP |
Note:BKIMBTIA is dropped after release 8.1. Stub BROKER
provides all features
of BKIMBTIA.
This section covers instruction for linking stubs:
To prepare your appliction to perform Broker calls
Link the front-end module BROKER from the EntireX load
library (EXX960.LIB) to your application. It has the entry point
"BROKER". When BROKER is first called, it loads the
actual stub module from the EntireX load library and transfers control
to it.
Add the following assignment to the startup procedure:
/ADD-FILE-LINK LINK-NAME=ETBLIB,FILE-NAME=<EXX_load_library>
To enable the Adabas transport method, add the following assignment to the startup procedure:
/ADD-FILE-LINK LINK-NAME=DDLIB,FILE-NAME=<adabas_load_library>
As a result, the required Adabas link module is loaded from the appropriate Adabas load library.
Add the following assignment to the startup procedure:
/ADD-FILE-LINK LINK-NAME=DDLNKPAR,FILE-NAME=<adalnk-parameter>
As a result, ADAUSER reads the configuration parameters, for example IDTNAME.
To prepare your appliction to perform Broker calls
Add the following assignment to the startup procedure:
/ADD-FILE-LINK LINK-NAME=BLSLIB00,FILE-NAME=<EXX_load_library>
Add the following assignment to the startup procedure:
/ADD-FILE-LINK LINK-NAME=ETBLIB,FILE-NAME=<EXX_load_library>
Start Natural with the following profile parameters:
RCA=(BROKER),RCALIAS=(BROKER,BROKER)
As a result, BROKER is loaded dynamically, and each broker call
will use this stub.
Note:
This dynamic load/execute will work even if an old NATETB23 has
already been linked to the shared Natural nucleus as static module. You need
not link BROKER statically to the Natural front-end. It is, however, possible
to link BROKER statically to the front-end Natural and remove the NATETB23
module from the shared Natural nucleus to avoid specifying the profile
parameters mentioned above.
This section covers the following topics:
The following table describes the possible values for the transport methods:
| Transport Value | Description / Tips | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| NET |
|
||||||||||||||||
| TCP | Use TCP/IP as transport method. | ||||||||||||||||
| Stub | Default Transport Method |
|---|---|
| BKIMBTIA | NET |
| BROKER | NET |
This section covers specifications for transport methods as part of the broker ID.
Note:
If no transport method has been specified as part of the broker ID,
default value NET is used.
To Use Adabas Communication as Transport Method
Specify:
broker-id::NET
Notes:
IDTNAME with the broker ID. The
IDTNAME is specified in a parameter file controlled by the ADAUSER module
(assigned using link name DDLNKPAR).
To use TCP/IP as transport method
Specify:
broker-id:nnnnn:TCP
where nnnnn is a placeholder for a port number.
If the transport layer is interrupted, communication between the broker and the stub - that is, client or server application - is no longer possible. A client or server might possibly wait infinitely for a broker reply or message in such a situation. To prevent this and return control to your calling application in such a situation, set a timeout value for the transport method.
The timeout settings for transport layers are independent of the timeout settings of the broker.
Setting the timeout for the transport layer is possible for the transport
method TCP, and is supported by
broker stub BROKER.
The timeout value for the transport method is set by the environment variable ETB_TIMEOUT on the stub side.
This transport timeout is used together with the broker
timeout - which is set by the application in the
WAIT field of the broker ACI control block - to
calculate the actual value for the transport layer's timeout.
The following table describes the possible values for the transport timeout:
| Transport Timeout Value |
Description |
|---|---|
| 0 | Infinite wait for the application. |
| n | The transport method additionally waits this time in seconds.
A negative value is treated as TIMEOUT=0 (infinite wait for
the application).
|
| nothing set | Transport method waits additional 20 seconds. |
The actual timeout for transport layer equals broker timeout (WAIT field) +
timeout value for transport method.
Setting tracing is supported by the broker stub BROKER if transport
method TCP is used. The stub tries to access the SDF variable
ETB-STUBLOG (or, failing that, a job variable with the same name), to evaluate
the value of the logging level. If the logging level is set, a sequential file
will be created with the file name
9999.ETB where
9999 is the task sequence number of the running
task.
| Trace Level | Description | |
|---|---|---|
| 0 | NONE |
No tracing. Switch tracing off. |
| 1 | STANDARD |
Traces initialization, errors, and all ACI request/reply strings. |
| 2 | ADVANCED |
Used primarily by system engineers, traces everything from level 1 and provides additional information, for example the Broker ACI control block, as well as information from the transports. |
| 3 | SUPPORT |
This is full tracing through the stub, including detailed traces of control blocks, message information, etc. |
To activate logging
Set JV ETB-STUBLOG to value [1|2|3].
Where "1" is the lowest log level and "3" is the highest.
SDF and job variables (environment variables in an Open Systems
architecture, i.e. UNIX or Windows) are used with the stub BROKER to read
configuration parameters. BS2000/OSD uses the hyphen character whereas
environment variables use the underscore character. The stub attempts to read
the SDF variable. If this fails, the job variable is read. If neither an SDF
variable nor a job variable is read, it is assumed not using any environment
variables.
You cannot use BROKER with dialog transactions under openUTM. You can,
however, use BROKER within asynchronous transaction processing under openUTM.
Prepare your Natural/UTM application as follows:
Link module BROKER from the EntireX library
EXX960.LIB to the front-end part of your Natural/UTM
application.
Add the following assignment to the Natural/UTM startup job:
/ADD-FILE-LINK LINK-NAME=ETBLIB,FILE-NAME=EXX_load_library
To enable the Adabas transport method, add the following assignment to the Natural/UTM startup job:
/ADD-FILE-LINK LINK-NAME=DDLIB,FILE-NAME=adabas_load_library
For more information on writing an asynchronous Natural/UTM transaction see section Asynchronous Transaction Processing under UTM in the Natural/UTM documentation.